Image not available
Illustrative purposes only
DMR20-0/5-R-C
Digital Panel Meter, Process Monitor, nano Meter DMR20-0/5 Series, Red LED Display, 0 to 5 V Input
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MURATA POWER SOLUTIONS
- Product type: Digital Panel Meters
- No. of Digits / Alpha:3.5; Meter Function:Process; Meter Range:0V to 5V, 0V to 10V; Digit Height:7.6mm; Panel Cutout Height:-; Panel Cutout Width:-; Supply Voltage Min:5VDC; Supp
- SVHC: No SVHC (27-Jun-2024)
- Meter Range: 0V to 5V, 0V to 10V
- Digit Height: 7.6mm
- Product Range: DMR20-0/5 Series
- Meter Function: Process
- Panel Cutout Width: -
- Supply Voltage Max: 40VDC
- Supply Voltage Min: 5VDC
- Panel Cutout Height: -
- No. of Digits / Alpha: 3.5
- Operating Temperature Max: 60°C
- Operating Temperature Min: 0°C
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 38.1 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## **- DMR20 0/5 Series** ## **0-5V Input, 3½ Digit LED Display Round Process Monitors** ## **FEATURES** - Provides scaling of 0-5V and 0-10V process signals - Operates from industrial 5V / 12V / 24V / 36V dc ~~ High-quality, 20-turn, span (gain) and zero (offset)~~ power supplies - Fits round 1.21 inch [30.7 mm] cutouts; less than 1.00 inch [25.4 mm] behind-the-panel depth - High input impedance, 100k Ω minimum - Easy-to-read, 0.30 inch [7.6 mm] high red or green LED display - Supplied with EPDM rubber gasket and hex nut - High-quality, 20-turn, span (gain) and zero (offset) adjustments - Gold-plated DIP-switches for range and decimal points: Reliable - screw-terminal input connections - Rugged, polycarbonate housing, one-piece package - Protected against dust and water submersion to IP67/NEMA 6 Murata Power Solutions’ new DMR20-0/5 Series are the world's first 0-5V input process monitors designed to fit industry standard, 1.21 inch [30.7 mm] round panel cutouts. Their large, easy-to-read, 0.30 inch [7.6 mm] digits are available in a choice of red or green LED displays. For the ultimate versatility in industrial applications, these new process monitors can be operated from any regulated source of 5V, 12V, 24V, or 36V dc power. Gain (span) and offset (zero) adjustments are performed with on-board, precision, 20-turn potentiometers. All decimal-point and range-change selections are made on a 6-position, vibration-resistant, gold-plated DIP switch. Unlike competitive meters, there are no jumpers or solder gaps to open or close. To further enhance reliability, the entire assembly utilizes 100% soldered connections. Both power-supply and inputsignal connections are made via a reliable, 3-position, screw-type terminal block. The DMR20-0/5's DIP switch and potentiometers accommodate hundreds of inputvoltage / output-reading combinations. This practically eliminates the need for more costly, long-lead-time, factory "customs" in applications which use several different-range meters. An EPDM rubber gasket and hex nut simplify installation and provide IP67 / NEMA 6 protection to environmental dirt and moisture, including water submersion to 3 feet (1 meter). ## ~~ee~~ **SIMPLIFIED SCHEMATIC DIAGRAM** **==> picture [520 x 110] intentionally omitted <==** **----- Start of picture text -----**<br> Figure 1<br>ON Simplified Schematic<br>Diagram<br>Z [se] (await<br>[RoHS]COMPLIANT OyoF | ' Pit dd Pape ca<br>For full details go to:- - rs es ee ee<br>—_—_—SennnwoO09mrRxmmmm>$@SsSaaame http://www.murata ps.com/en/support/rohs HI Lo +5-40 Vde<br>compliance.html<br>**----- End of picture text -----**<br> **www.murata-ps.com/support** **MPM_DMR20-0/5.A01** Page 1 of 5 ## **- DMR20 0/5 Series** 0-5V and 0-10V Input 3½ Digit, LED Display Process Control Monitors ## **Performance/Functional Specifications** Typical at TA = +25°C, unless otherwise noted. |**Input**<br>~~ee~~<br>~~ee~~|**MMin.**<br>~~ee~~<br>~~ee~~|**Typ.**<br>~~ee~~<br>~~ee~~|**Max.**<br>~~ee~~|**Units**<br>~~ee~~| |---|---|---|---|---| |**Full Scale Input Range **➀<br>~~ee~~|4.9<br>~~ee~~|5.0<br>~~ee~~|5.1|Volts| |**Input Impedance**<br>~~ee ~~<br>~~ee~~|100<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|–<br> ~~ee~~<br>~~ee~~|140<br>~~ee~~|K Ω<br>~~ee~~| |**Overvoltage Protection **➁<br>~~ee~~|–<br>~~ee~~<br>~~ee~~|–<br>~~ee~~|±40<br>~~ee~~|Volts<br>~~ee~~| |**Performance**<br>~~ee~~<br>~~pO~~||||| |**Sampling Rate**<br>~~ee~~|2.5 reading per second<br>~~ee~~|||| |**Accuracy**(1 minute warm-up):<br>~~ee~~|±0.05% FS ±1 Count<br>~~ee~~|||| |**Temperature Drift**(0 to +60°C)<br>~~pO~~|–<br>~~pO~~|±0.15<br>~~pO~~|±0.3<br>~~pO~~|Counts/°C<br>~~pO~~| |**Power Supply Requirements**<br>~~pO~~||||| |DMR20-0/5-R-C (7.5 mA max.)<br>~~pO~~<br>~~ee~~|+5.0<br>~~pO~~<br>~~ee~~|—<br>~~pO~~<br>~~ee~~|+40.0<br>~~pO~~<br>~~ee~~|Volts<br>~~pO~~<br>~~ee~~| |DMR20-0/5-G -C (10 mA max.)<br>~~po~~|+5.0<br>~~po~~|—<br>~~po~~|+40.0<br>~~po~~|Volts<br>~~po~~| |**Display**<br>~~po~~<br>~~po~~||||| |**Display Type and Size**<br>~~po~~<br>~~ee~~|3½ digit, 0.30" [7.6 mm] high LED<br>~~po~~<br>~~ee~~|||| |**Polarity Indication**<br>~~ee~~<br>~~ee~~|"–" for negative VIN<br>~~ee~~<br>~~ee~~|||| |**Overrange Indication**|"–1_ _ _" for negative inputs "1_<br>_ _" for positive inputs|||| |**Physical/Environmental**<br>~~po~~||||| |**Operating Temperature**<br>~~po~~<br>~~ee~~|0<br>~~po~~<br>~~ee~~|–<br>~~po~~<br>~~ee~~|+60<br>~~po~~<br>~~ee~~|°C<br>~~po~~<br>~~ee~~| |**Storage Temperature**<br>~~ee~~<br>~~ee~~|–20<br>~~ee~~<br>~~ee~~|–<br>~~ee~~<br>~~ee~~|+75<br>~~ee~~<br>~~ee~~|°C<br>~~ee~~<br>~~ee~~| |**Humidity (non-condensing)**<br>~~ee~~|0<br>~~ee~~|–<br>~~ee~~|85<br>~~ee~~|%<br>~~ee~~| |**Case Material**<br>~~po~~|Polycarbonate<br>~~po~~|||| |**Weight**<br>~~ee~~|0.65 ounces (18.5 grams)<br>~~ee~~|||| - `➀` The DMR20-0/5 can also be used in most 0-10V applications. See the section on 0-10V inputs for more information. - `➁` INPUT LO (TB1-2) shares a common connection with power ground (also TB1–2). Overvoltage specifications apply to the INPUT HI (TB1-1) connection referenced to TB1-2. ## **Ordering Information** ~~Lo~~ **DMR20-0/5-R-C** +5 to +50Vdc V Supply, Red LED’s **DMR20-0/5-G-C** +5 to +50Vdc V Supply, Green LED’s Note: An M30 x 1.5 nylon metric hex nut and EPDM sealing gasket are supplied with each meter. The “-C” suffix indicates RoHS compliance Panel Knockout Tools: **DMR20-1-KP** 1.22” [30.9 mm] punch (no keying notch) **DMR20-2-KP** 1.21” [30.7 mm] punch with 4 keying notches **DMR20-3-KP** Keyway Punch tool ## **TECHNICAL NOTES** **1. Input Configuration** : The DMR20-0/5 has its signal input LO terminal connected to its power supply ground terminal (TB1-2). This connection effectively places the meter's input in a single-ended configuration, that is, signal ground is connected directly to power ground. In some applications, single-ended inputs may cause groundloop induced errors (the meter's display becomes unstable). Applications which require electrical isolation between the input signal ground and the system power supply ground must use a separate transformer-isolated supply to power the meter. **2. Panel Mounting** : In most standard through-the-panel installations, the DMR20-0/5 must be secured to the panel with the supplied M30 x 1.5 metric nut and gasket, see the Mechanical Specifications section for more information. ## **OPERATING AND SETUP INSTRUCTIONS** As shipped, the DMR20-0/5 is factory calibrated to read "000" for a 0.0 V input and "1900" for a 5.0 V input. The following worst-case procedure assumes the DMR20-0/5 is completely miss-adjusted, i.e., both potentiometers and the DIP switches are randomly set. 1. Set R7 (full scale span/gain adjust) fully counterclockwise, and R3 (zero/offset adjust) fully clockwise, roughly 22 turns, and place SW3SW6 to OFF (down position). 2. Select DIP switch setting #1 in Table 1. 3. Apply a precision 0.0 V input and adjust R3 until the meter's display reads "000.” 4. Apply a precision 5.0 V input and adjust R7 until the meter's display reads "1900.” Repeat steps 3 and 4 to make sure the adjustments do not affect one another. 5. Select the appropriate decimal point by setting SW and SW2 per Table 3. NOTE: The "000" to "1900" display readings referred to in the instructions above are for instructional purposes only. If other display readings are desired, refer to DIP-Switch Settings Tables 1 and 2 for SW3-SW6 settings. The initial setting of R3 fully clockwise and R7 fully counterclockwise is recommended in the adjustment procedure for all the following examples. **www.murata-ps.com/support** **MPM_DMR20-0/5.A01** Page 2 of 5 **- DMR20 0/5 Series** 0-5V and 0-10V Input 3½ Digit, LED Display Process Control Monitors ## **0-5 V Inputs** ## **Examples (0-5V Inputs)** **1.** Desired display readings are: 0.0 V input = "0.00" 5.0 V input = "6.00" Use DIP-switch setting #3 in Table 1 and enable decimal point DP2 by setting SW1 to ON and SW2 to OFF. Apply 0.0 V and adjust R3 so the display reads "0.00.” Apply 5.0 V and adjust R7 so the display reads "6.00.” **2.** Desired display readings - are: 0.0 V input = "000" 5.0 V input = "800" Use DIP-switch setting #2 in Table 1. Apply 0.0 V and adjust R3 so the display reads "000.” Apply 5.0 V and adjust R7 so the display reads "800.” For these display readings, no decimal points are used, so set SW1 and SW2 both to ON. **3.** Desired display readings are: 0.0 V input = ”000" 5.0 V input = ”250" UOUDND Use DIP-switch setting #5 in Table 1 and enable decimal point DP1 by setting SW1 to OFF and SW2 to ON. Apply 0.0 V and adjust R3 so the display reads "000.” Apply 5.0 V and adjust R7 so the display reads ”250.” **4.** Desired display readings are: 1.0 V input = ”000" 6.0 V input = ”090" Even though this input is positioned between +1.0 V and +6.0 V, it still meets the 5V full scale differential input range listed in the Functional Specifications section. Use DIP-switch setting #8 in Table 1. Apply 1.0 V and adjust R3 so the display reads “090’. With this type of input, it is advisable to recheck both input levels to be sure the potentiometer settings did not affect one another. |~~—~~<br>~~a~~|**0.0 V Input**<br>~~ee~~|**5.0 V Input**<br>~~ee~~|**SW3**<br>~~ee~~|**SW4**<br>~~ee~~<br>~~ee~~|**SW5**<br>~~ee~~<br>~~ee~~|**SW6**<br>~~ee~~<br>~~ee~~| |---|---|---|---|---|---|---| |**1**<br>~~—~~<br>~~a~~|000<br>~~ee~~|to 1200-1999 <br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~| |**2**<br>~~—~~<br>~~ee~~|000<br>~~ee~~|to 700-1200<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~| |**3**<br>~~ee~~|000<br>~~ee~~|to 400-700<br>~~ee ~~<br>~~ee~~|Off<br> ~~ee ~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|Off<br> ~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~| |**4**<br>~~ee~~<br>~~ee~~|000<br>~~ee~~<br>~~ee~~|to 300-400<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~| |**5**<br>~~ee~~|000<br>~~ee~~|to 190-300<br>~~ee~~<br>~~ee~~|Off<br>~~ee ~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br> ~~ee ~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br> ~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~| |**6**<br>~~ee~~<br>~~ee~~|000<br>~~ee~~<br>~~ee~~|to 120-190<br>~~ee~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br>~~ee ~~<br>~~ee~~<br>~~ee~~|Off<br>~~ee~~<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br> ~~ee~~<br>~~ee~~<br>~~ee~~| |**7**<br>~~ee~~|000<br>~~ee~~|to 100-150<br>~~ee~~|Off<br>~~ee ~~<br>~~ee~~|On<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|On<br> ~~ee ~~<br>~~ee~~<br>~~ee~~|On<br> ~~ee~~<br>~~ee~~<br>~~ee~~| |**8**<br>~~ee~~<br>~~ee~~|000<br>~~ee~~<br>~~ee~~|to 90-140<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~| ## **0-10 V Inputs** While the DMR20-0/5 is optimized for operation with 0-5V inputs, its versatile input stage can also accommodate most 0-10V applications. The meter's zero/offset potentiometer (R3) has enough adjustment range to produce a "000" display reading with input signal levels between –0.1 V and +1.0 V. Table 2 summarizes the available ranges when the DMR200/5 is used with 0-10V inputs. ## **Example (0-10V Inputs)** **1.** Desired display readings are: 0.0 V input = "000" 10.0 V input = "500" Use DIP switch setting #4 in Table 2. Apply 0.0 V and adjust R3 so the display reads "000.” Apply 10.0 V and adjust R7 so the display reads "500.” |~~pj~~<br>~~ee~~|**0.0 V Input**<br>~~pjj|-——~~|**10.0 V Input**<br>~~j|-——|~~<br>|**SW3**<br>~~||~~<br>|**SW4**<br>~~|~~<br>~~[|~~<br>~~**e**e~~<br>|**SW5**<br>~~[||~~<br>~~e~~|**SW6**<br>~~|~~<br>~~e~~~~**e**~~| |---|---|---|---|---|---|---| ||**0.0 V Input**<br>~~pjj|-——~~<br>~~ee~~|||||| |**1**<br>~~pj~~<br>~~ee~~<br>~~ee~~|000<br>~~pj j|-——~~<br>~~ee~~<br>~~ee~~|to 1400-1999 <br>~~j|-—— |~~<br>~~ee~~<br>|On<br>~~| |~~<br>~~ee~~<br>|Off<br>~~|~~<br>~~[|~~<br>~~ee~~<br>~~**e**e~~<br>|Off<br>~~[| | ~~<br>~~ee~~<br>~~e~~<br>~~ee~~|Off<br> ~~|~~<br>~~ee~~<br>~~e~~~~**e**~~<br>~~e~~| |**2**<br>~~ee~~<br>~~ee~~|000<br>~~ee~~<br>~~ee~~|to 800-1400<br>~~e~~<br>~~ee~~|Off<br>~~e~~<br>~~ee~~|On<br>~~**e**e~~<br>~~e~~<br>~~eee~~|Off<br>~~e~~<br>~~ee~~<br>~~eee~~|Off<br>~~e~~~~**e**~~<br>~~e~~<br>~~eee~~| |**3**<br>~~ee~~<br>~~ee~~<br>~~FEE~~|000<br>~~ee~~<br>~~ee~~<br>~~FEE~~|to 600-800<br>~~e~~<br>~~ee~~<br>~~FEE SSE~~|Off<br>~~e~~<br>~~ee~~<br>~~SSE~~|Off<br>~~**e**e ~~<br>~~e~~<br>~~eee~~<br>~~SSE~~|On<br> ~~e~~<br>~~ee~~<br>~~eee~~<br>~~Er~~|Off<br>~~e~~~~**e**~~<br>~~e~~<br>~~eee~~<br>~~Er~~| |**4**<br>~~ee~~<br>~~FEE~~|000<br>~~ee~~<br>~~FEE~~|to 380-600<br>~~ee ~~<br>~~FEE SSE~~|Off<br> ~~ee~~<br>~~SSE~~|On<br>~~eee~~<br>~~SSE~~|On<br>~~eee~~<br>~~Er~~|Off<br>~~eee~~<br>~~Er~~| |**5**<br>~~FEE~~<br>~~ee~~|000<br>~~FEE~~<br>~~ee~~|to 240-380<br>~~FEE SSE~~<br>~~ee~~|Off<br>~~SSE~~<br>~~ee~~|Off<br>~~SSE~~|On<br>~~Er~~<br>~~ee~~|On<br>~~Er~~<br>~~ee~~| |**6**<br>~~FEE~~<br>~~ee~~<br>~~ee~~|000<br>~~FEE~~<br>~~ee~~<br>~~ee~~|to 200-300<br>~~FEE SSE~~<br>~~ee~~<br>~~ee~~|Off<br>~~SSE~~<br>~~ee~~<br>~~ee~~|On<br>~~SSE ~~<br>~~ee~~|On<br> ~~Er~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br>~~Er~~<br>~~ee~~<br>~~ee~~<br>~~ee~~| |**7**<br>~~ee~~<br>~~ee~~|000<br>~~ee~~<br>~~ee~~|to 180-280<br>~~ee ~~<br>~~ee~~|On<br> ~~ee~~<br>~~ee~~|On<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~|On<br>~~ee~~<br>~~ee~~<br>~~ee~~| ## **Table 3** **Decimal Point Settings (All Models)** |**SW1**<br>~~————~~|**SW2**<br>~~————~~|**Decimal Point**<br>~~————~~| |---|---|---| |Off<br>~~————~~|Off<br>~~————~~|DP3<br>~~————~~| |On<br>~~————~~|Off<br>~~————~~|DP2<br>~~————~~| |Off<br>~~————~~|On<br>~~————~~|DP1<br>~~————~~| |On<br>~~————~~|On<br>~~————~~|None<br>~~————~~| `➂` The DMR20-0/5 is optimized for 0/5 V process input signals that range between -0.1 V and +6.0 V. As such, input signal ranges can be anywhere between -0.1 V and +6.0 V or between +1.0 V and +6.0 V, as long as the differential value is 5.0 Volts. The meter’s zero/offset potentiometer (R3) has enough adjustment range to produce a “000’ display reading for zero input signal levels between -0.1 V and +1.0 V. As noted earlier, most 0-10 V inputs can also be accommodated as indicated in Table 2. **www.murata-ps.com/support** **MPM_DMR20-0/5.A01** Page 3 of 5 **- DMR20 0/5 Series** **0-5V Input, 3 ½ Digit LED Display Round Process Monitors** **==> picture [549 x 345] intentionally omitted <==** **----- Start of picture text -----**<br> CONNECTION DIAGRAM ee<br>Rg Ri<br>ZerosAdjust Offset aN(i GainAdjust/ Span<br>FumeS<br>i<br>Figure 2<br>Typical DMR20-0/5<br>Connection Diagram<br>APS! . Op<br>ELI Tt ’ Switches<br>Pe<br>+24 Vide +24 Vde<br>Signal + +<br>Sensor Conditianer +24 Vde<br>Input with Power<br>g-5¥ Output _ Supply<br> INSTALLATION DIAGRAM ee<br>**----- End of picture text -----**<br> **==> picture [72 x 22] intentionally omitted <==** **----- Start of picture text -----**<br> Figure 3<br>Panel Installation<br>**----- End of picture text -----**<br> **www.murata-ps.com/support** **MPM_DMR20-0/5.A01** Page 4 of 5 ## **- DMR20 0/5 Series 0-5V Input, 3 ½ Digit LED Display Round Process Monitors** ## **MECHANICAL SPECIFICATIONS AND RECOMMENDED PANEL CUTOUT** **==> picture [181 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> -<br>http://www.murata ps.com/en/3d/meters.html<br>**----- End of picture text -----**<br> ## **Available Panel Knockout Tools:** ## **TB1 Recommended Wire Terminations:** DMR20-1-KP 1.22” [30.9 mm] punch (no keying notch) DMR20-2-KP 1.21” [30.7 mm] punch with 4 keying notches DMR20-3-KP Keyway Punch tool WIRE SIZE: 18 to 26 AWG (Solid or stranded) STRIPPING LENGTH: 0.20” [5.1 mm] Nominal Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED **This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to:** http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. _**© 2015 Murata Power Solutions, Inc.**_ **www.murata-ps.com/support** **MPM_DMR20-0/5.A01** Page 5 of 5
Updated at June 9, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →