DEL-PH18CND10PASA

## **Photoelectrics Diffuse-reflective Type PH18CND..., DC** 

- **Miniature sensor range** 

- **Range: 1 m** 

- **Sensitivity adjustment by potentiometer** 

- **Modulated, red light 625 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP, N.O & N.C.** 

- **Degree of protection IP67, IP69K** 

- **LED indication for output, stability and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable, plug and pigtail versions** 

- **• Excellent EMC performance** 

** Cable, plug and pigtail versions** T | **• Excellent EMC performance** uw. cous **Product Descriptionptiontion Ordering Key PH18CND10PAM1SA** The PH18CND10... is part of Compact housing and high **Type** a family of inexpensive generpower LED for excellent **Housing style square** al purpose diffuse reflective performance-size ratio. **Housing size** sensors in industrial standard The potentiometer used for **Housing material** 18 mm cylindrical and square adjustment of the sensitivity **Housing type neutral** ABS housing. makes the sensors highly flex- **Detection principle** The sensors are useful in ible. The output type is NPN **Sensing distance** applications where highor PNP and the output switch- **Output type** accuracy detection as well as ing function is NO and NC. **Output configuration** small size is required. **Connection type** ~~=r~~ **Sensitive adjustment T e Selection yp Housing style Range Connection                Ordering no. Ordering no. Sn NPN                                       PNP Make & break switching Make & break switching** M18 Square type                   1 m Cable **PH 18 CND 10 NASA PH 18 CND 10 PASA** M18 Square type                   1 m Plug **PH 18 CND 10 NAM1SA      PH 18 CND 10 PAM1SA** M18 Square type                   1 m Pigtail M12 **PH 18 CND 10 NAT1SA PH 18 CND 10 PAT1SA** 

## **Product Descriptionptiontion** 

## **T e Selection yp** 

## **Specifications** according to EN60947-5-2 

|**Rated operating distance**(Sn) Up to 1 m,|
|---|
|reference target Kodak test<br>card R27, white, 90%<br>reflective,200 x 200 mm<br>**Blind zone **20 mm<br>**Sensitivity control**Adjustable by potentiometer<br>270°|
|Adjustable distance                       50-1000 mm<br>**Temperature drift **≤0.2%/ºC<br>**Hysteresis**(H)<br> (differential travel) ≤20%<br>**Rated operational volt.**(UB)10 to 30 VDC(ripple included)<br>**Ripple**(Urpp) ≤10%<br>**Output current**<br>Continuous (Ie)  ≤100 mA<br>Short-time (I)≤100 mA<br> (max. load capacity100 nF)|
|**No load supply current**(Io)  ≤20 mA @ 24 VDC|
|**Minimum operational current**(Im)0.5 mA<br>**OFF-state current**(Ir)  ≤100 µA|



|**Voltage drop **(Ud)|≤2.0 VDC @ 100 mA|
|---|---|
|**Protection**|Short-circuit, reverse|
||polarityand transients|
|**Light source** InGaAlP|InGaAlP,LED,625 nm|
|**Light type**Red|Red,modulated|
|**Sensing angle**± 2º|± 2º|
|**Ambient light**30.000 lux|30.000 lux|
|Incandescent lam|Incandescent lamp|
|**Light spot Diameter** Ø 52 mm @ 0.5 m|Ø 52 mm @ 0.5 m|
|**Operating frequency**500 Hz|500 Hz|
|**Response time**||
|OFF-ON (tON)|)≤1.0 ms|
|ON-OFF(tOFF)|≤1.0 ms|
|**Power ON delay **(tv)|≤300 ms|
|**Output function**||
|Type NPN or PNP|NPN or PNP|
|Switchingfunction NO and NC|NO and NC|
|**Indication**|**Indication**|
|Output ON LED, yellow|LED, yellow|
|Signal stability and power ONLED, green|LED, green|



**1** 

Specifications are subject to change without notice (25.04.2012) 

**PH18CND...** 

## **Specifications (cont.)** 

|**Environment**|||
|---|---|---|
|Installation category                   III (IEC 60664/60664A;|Installation category                   III (IEC 60664/60664A;||
|60947-1)|60947-1)||
|Pollution degree                         3 (IEC 60664/60664A;|Pollution degree                         3 (IEC 60664/60664A;||
|60947-1)|60947-1)||
|Degree ofprotection                  IP 67|rotection                  IP 67,IP 69K*||
|**Ambient temperature**|||
|Operating|-25°to +60°C (-13°to +140°F)||
|Storage                                      -40<br>**Vibration** 10 to 55 Hz, 0.5 mm/7.5 g<br> <br>**Shock **30 g / 11ms, 3 pos, 3 neg<br> <br>per axis<br> <br>**Rated insulation voltage**500 VAC (rms)<br>IEC protection class III|e                                      -40°to +70°C(-40°to +158°F)<br>10 to 55 Hz, 0.5 mm/7.5 g<br> (IEC 60068-2-6)<br>30 g / 11ms, 3 pos, 3 neg<br>per axis<br> (IEC 60068-2-6,60068-2-32)<br>500 VAC (rms) <br>IEC protection class III||



|**Housing material**||
|---|---|
|Body                                           ABS, grey|Body                                           ABS, grey|
|Front material                             PMMA|Front material                             PMMA,red|
|**Connection**||
|Cable PVC, grey, 2 m|PVC, grey, 2 m|
|4 x 0.25 mm|4 x 0.25 mm2, Ø = 4.5 mm|
|Plug M12, 4-pin|M12, 4-pin|
|(CONM14NF-series)|(CONM14NF-series)|
|Pigtail PUR, grey, 30 cm|PUR, grey, 30 cm|
|4 x 0.25 mm|4 x 0.25 mm2, Ø = 4.5 mm|
|M12, 4-pin|M12, 4-pin|
||(CONM14NF-series)|
|**Weight**With cable: 75 g|With cable: 75 g|
|With plug:  10 g|With plug:  10 g|
|With|Withpigtail: 35g|
|**CE-marking**Yes|Yes|
|**Approvals**cULus (UL508)|cULus (UL508)|
|supply class 2|supply class 2|



* The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications. The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning. The sensor is exposed to high pressure water from a spray nozzle that is fed with 80°C water at 8'000– 10'000 KPa (80–100bar) and a flow rate of 14–6L/min. The nozzle is held 100 –150 mm from the sensor at angles of 0°, 30°, 60° and 90° for 30s each. The test device sits on a turntable that rotates with a speed of 5 times per minute. The sensor must not suffer any damaging effects from the high pressure water in appearance and function. 

**==> picture [62 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
90°<br>60°<br>30°<br>0°<br>**----- End of picture text -----**<br>


## **O eration Dia ram p g** 

**==> picture [119 x 75] intentionally omitted <==**

**----- Start of picture text -----**<br>
tv = Power ON delay<br>ON<br>Power supply OFF<br>Present<br>Object Not Present<br>ON Tv<br>Break Output (N.C.) OFF es<br>ON<br>Make Output (N.O.)  OFF<br>**----- End of picture text -----**<br>


**==> picture [8 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
Tv<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [405 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN PNP<br>1 BN ‘ V 1 BN + V<br>4 BK<br><><br>2 WH<br>2 WH<br>4 BK<br>3 BU <> 3 BU<br>V GND V GND<br>**----- End of picture text -----**<br>


**2** 

Specifications are subject to change without notice (25.04.2012) 

**PH18CND...** 

## **Detection Diagram** 

## **Excess Gain** 

**==> picture [234 x 164] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>Y<br>X R27<br>Kodac test card (inch)<br>0,0 7,9 15,7 23,6 31,5 39,4 47,2 55,1<br>40 1,6<br>30 1,2<br>20 -—} +} +} A__ 0,8<br>10 0,4<br>0 0,0<br>-10 -0,4<br>-20 -0,8<br>-30 a -1,2<br>-40 ee -1,6<br>0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4<br>Distance (m)<br>(mm) (inch)<br>**----- End of picture text -----**<br>


**==> picture [223 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
(inch)<br>0,0 7,9 15,7 23,6 31,5 39,4 47,2 55,1<br>10.000 ee ee ee eee eee eee eee<br>1.000<br>100<br>10<br>SS<br>1 a oe<br>0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4<br>Distance (m)<br>Excess Gain<br>**----- End of picture text -----**<br>


## **Si nal Stabilit Indication g y** 

## **APH18-MB1** 

**==> picture [453 x 103] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess Gain<br>1.1 Operation level x 1.1<br>1.0 Operation level<br>0.9 Operation level x 0.9<br>Green LED ON rs | | | Time || S Ø 27 e ELt— 6.5<br>Yellow LED ON<br>Ø 27<br>**----- End of picture text -----**<br>


**==> picture [4 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.5<br>**----- End of picture text -----**<br>


## **Mountin S stems g y** 

**==> picture [450 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
M18 Locknut<br>PH18 mounting with a combination of 1 x<br>APH18-MB1 and 1 x M18 locknut.<br>Maximum torque 0.9 NM<br>APH18-MB1<br>Min. 1.0 mmMax. 4.5 mm<br>**----- End of picture text -----**<br>


**3** 

Specifications are subject to change without notice (25.04.2012) 

**PH18CND...** 

## **Dimensions** 

**==> picture [500 x 451] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable/Pigtail version<br>31.5 Power and Stability  15 Operation  Power and Stability  Pigtail M12<br>10.5 17.5 Indicator (Green) Indicator (Yellow) Indicator (Green)<br>3.4<br>3 Emitter<br>Sensitivity Control 270°<br>Receiver<br>Optical Axis<br>Ø 9.9<br>Ø 4.5<br>Plug version<br>31.5 Power and Stability  15 Operation  Power and Stability<br>10.5 17.5 Indicator (Green) Indicator (Yellow) Indicator (Green)<br>3.4<br>3 Emitter<br>Sensitivity Control 270°<br>Receiver<br>Optical Axis<br>M12 x 1 plug<br>1<br>2 4<br>3<br>1<br>2 4<br>3<br>1.5<br>5.45<br>11<br>3.5<br>24.1 35<br>M18 x 1 3.5<br>6.3<br>1.5<br>5.45<br>11<br>3.5<br>24.1 35<br>M18 x 1 3.5<br>10.8<br>**----- End of picture text -----**<br>


## **Installation Hints** 

**==> picture [499 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect Incorrect<br>Incorrect<br>Correct Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


**4** 

Specifications are subject to change without notice (25.04.2012) 

## **Deliver Contents y** 

- Photoelectric switch: PH 18 CND... 

## **Accessories** 

   - Connector type CONG1A.. / CONM14NF.. series 

- Installation instruction on plastic bag 

- Screwdriver 

- Mounting bracket APH18-MB1 

- 1 M18 locknuts 

- **Packaging:** Plastic bag 

**5** 

Specifications are subject to change without notice (25.04.2012)