DDRH-60-12

Isolated DIN Rail Mount DC/DC Converter, 10:1, 60 W, 1 Output, 12 V, 5 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: MEAN WELL
Product type: Isolated DIN Rail Mount DC / DC Converters
SVHC: No SVHC (25-Jun-2025)
Depth: 105mm
Width: 57mm
Height: 93.5mm
Input Ratio: 10:1
Product Range: DDRH-60 Series
No. of Outputs: 1 Output
Output Power Max: 60W
Isolation Voltage: 4kV
Output Regulation: -
Input Voltage DC Max: 1.5kV
Input Voltage DC Min: 150V
Input Voltage DC Nom: 800V
Output Current - Output 1: 5A
Output Current - Output 2: -
Output Voltage - Output 1: 12V
Output Voltage - Output 2: -
Power Supply Applications: -
DC / DC Converter Output Type: Fixed, Adjustable
Delivery and price
Units per pack	50
Price	48.69 €
Current stock	10+
Lead time	30 days
Datasheet
**- DDRH 60 series** 

60W Ultra Wide Input  DIN Rail Type DC-DC Converter 

**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


**==> picture [292 x 371] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>10:1 ultra - wide input range *<br>width *<br>high isolation(Reinforced isolation) *<br>Short circuit / Overload/ Over voltag/ Ov e r temperature °*<br>DC input under voltage / DC input reverse polarity *<br>by free air convection *<br>installed on DIN rail TS-35/7.5 or 15<br>°C —_ultra-wide operating temperature ( ＞+ 55 °C derating )<br>category Ⅱ<br>altitude up to 5000 meters<br>relay contact<br>voltage adjustable(+20%)<br>warranty<br>series is a 150 ~ 1500Vdc ultra-high input DIN rail<br>stable working voltage for the load. It is suitable<br>rails. Main features are as following: easy to install<br>design, -30~+80 °C wide range operating temperature,<br>at 5000m altitude, high efficiency, low ripple & noise,<br>is compliant with EN-61000-6-2 standard<br>It is suitable for industrial automation,<br>can be widely deployed in the applications of new<br>**----- End of picture text -----**<br>


## and 

**==> picture [13 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
■<br>**----- End of picture text -----**<br>


_File Name:DDRH-60-SPEC   2019-12-27_ 

## **-** 60W Ultra Wide Input  DIN Rail Type DC-DC Converter **DDRH 60 series** 

## **SPECIFICATION** 

|**DDRH-60-5**<br>**DDRH-60-24**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (max.)**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**DC OK SIGNAL**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>5V<br>24V<br>10A<br>2.5A<br>0<br>10A<br>~<br>0<br>2.5A<br>~<br>50W<br>60W<br>100mVp-p<br>150mVp-p<br>5<br>6V<br>~<br>24<br>29V<br>~<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±1.5%<br>±0.5%<br>150<br>1500Vdc<br>~<br>COLD START<br>120A /1500Vdc       80A/800Vdc        30A/150Vdc<br>105 ~ 135% rated output power<br>6.6<br>8.4V<br>~<br>30<br>38V<br>~<br>Protection type : Hiccup up mode when output voltage<55%, recovers automatically after condition is removed;<br>Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>IEC62109-1<br>approved; Design refer to UL1741(By request)<br>(LVD) , EAC TP TC 004<br>-30<br>+80<br>(Refer to "Derating Curve")<br>~<br>℃<br>Relay contact rating(max.) : 30V / 1A resistive<br>20<br>90% RH non-condensing<br>~<br>-40<br>+80<br>, 10<br>95%  RH non-condensing<br>~<br>~<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6<br>454.5K hrs min.      MIL-HDBK-217F (25<br>);             503K hrs min.<br>℃<br>℃<br>Telcordia TR/SR-332 (Bellcore) (25<br>)<br>**DDRH-60-48**<br>48V<br>1.25A<br>0<br>1.25A<br>~<br>60W<br>200mVp-p<br>48<br>54V<br>~<br>±1.0%<br>±0.5%<br>±0.5%<br>55<br>60V<br>~<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note.7)**<br>**PROTECTION**<br>℃<br>℃<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4KVAC      O/P-DC OK:0.5KVAC<br>I/P-O/P, 100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**FUNCTION**<br>57*93.5*105mm (W*H*D)<br>0.8Kg; 16pcs/12.8Kg/0.82CUFT<br>EN55035, EN61000-6-2<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Parameter**<br>Conducted<br>Radiated<br>Voltage Flicker<br>**Standard**<br>EN55032(CISPR32)<br>**Test Level / Note**<br>Class A<br>-------<br>EN61000-3-3<br>Class A<br>**Parameter**<br>ESD<br>Radiated Susceptibility<br>EFT/Burest<br>Surge<br>**Standard**<br>EN61000-4-2<br>**Test Level /Note**<br>Level 3, 8KV air; Level 2, 4KV contact, criteria A<br>Level 4, 2KV/Vin+ ~ Vin-, criteria A<br>Conducted<br>Magnetic Field<br>EN61000-4-3<br>EN61000-4-4<br>EN61000-4-6<br>EN61000-4-5<br>EN61000-4-8<br>EN61000-4-11<br>Voltage Dips and interruptions<br>Level 3, 10V, criteria A<br>Level 3, 2KV, criteria A<br>Level 3, 10V, criteria A<br>Level 4, 30A, criteria A<br>EN55032(CISPR32)<br>＞<br>.<br>95% dip 0 5 periods, 30% dip 25 periods,<br>95% interruptions 250 periods<br>＞<br>**REVERSE POLARITY**<br>**DC INPUT**<br>**UNDER VOLTAGE LOCKOUT**<br>By internal Bridge Diode, no damage, recovers automatically after fault condition removed<br>Under voltage protection range:120 ~ 130Vdc , Under voltage release range:130 ~ 146.5Vdc<br>**OVER VOLTAGE CATEGORY**<br>**OPERATING ALTITUDE Note.5**<br>Ⅱ; According to EN62109-1; altitude up to 5000 meters<br>5000 meters /OVCⅡ<br>**DDRH-60-12**<br>12V<br>5A<br>0<br>5A<br>~<br>60W<br>120mVp-p<br>12<br>15V<br>~<br>±1.5%<br>±0.5%<br>±0.5%<br>80%<br>81%<br>76%<br>83%<br>85%<br>81%<br>86%<br>87%<br>84%<br>87%<br>88%<br>83%<br>16.5<br>21V<br>~<br>**EXTERNAL CAPACITANCE LOAD (Max.)** 6000<br>F<br>μ<br>4000<br>F<br>μ<br>2500<br>F<br>μ<br>1000<br>F<br>μ<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>**200Vdc**<br>**800Vdc**<br>**1500Vdc**<br>~~GO~~<br>Re~~GG~~<br>~~OO~~<br>~~OO~~<br>~~GC~~<br>~~GG~~<br>Re~~OG~~<br>~~GC~~<br>~~OG~~<br>~~(~~<br>~~GG~~<br>I<br>a~~eG~~<br>~~GC~~<br>~~a~~<br>a~~a~~se<br>~~|~~<br>a ~~|~~<br>Ce<br>aa<br>Re<br>I<br>a<br>Re<br>Rs<br>a<br>a<br>a ~~eG~~<br>a<br>~~Re~~<br>a<br>a ~~Q~~<br>~~eG~~<br>~~eG~~<br>a<br>~~O~~<br>~~a~~<br>~~O~~<br>~~eG~~<br>~~Re~~<br>Re<br>I<br>Rn<br>1. All parameters NOT specially mentioned are measured at 600Vdc input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated witha0.<br>&4 _<br>parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500ft).<br>6. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|**DDRH-60-5**<br>**DDRH-60-24**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (max.)**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**DC OK SIGNAL**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>5V<br>24V<br>10A<br>2.5A<br>0<br>10A<br>~<br>0<br>2.5A<br>~<br>50W<br>60W<br>100mVp-p<br>150mVp-p<br>5<br>6V<br>~<br>24<br>29V<br>~<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±1.5%<br>±0.5%<br>150<br>1500Vdc<br>~<br>COLD START<br>120A /1500Vdc       80A/800Vdc        30A/150Vdc<br>105 ~ 135% rated output power<br>6.6<br>8.4V<br>~<br>30<br>38V<br>~<br>Protection type : Hiccup up mode when output voltage<55%, recovers automatically after condition is removed;<br>Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>IEC62109-1<br>approved; Design refer to UL1741(By request)<br>(LVD) , EAC TP TC 004<br>-30<br>+80<br>(Refer to "Derating Curve")<br>~<br>℃<br>Relay contact rating(max.) : 30V / 1A resistive<br>20<br>90% RH non-condensing<br>~<br>-40<br>+80<br>, 10<br>95%  RH non-condensing<br>~<br>~<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6<br>454.5K hrs min.      MIL-HDBK-217F (25<br>);             503K hrs min.<br>℃<br>℃<br>Telcordia TR/SR-332 (Bellcore) (25<br>)<br>**DDRH-60-48**<br>48V<br>1.25A<br>0<br>1.25A<br>~<br>60W<br>200mVp-p<br>48<br>54V<br>~<br>±1.0%<br>±0.5%<br>±0.5%<br>55<br>60V<br>~<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note.7)**<br>**PROTECTION**<br>℃<br>℃<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4KVAC      O/P-DC OK:0.5KVAC<br>I/P-O/P, 100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**FUNCTION**<br>57*93.5*105mm (W*H*D)<br>0.8Kg; 16pcs/12.8Kg/0.82CUFT<br>EN55035, EN61000-6-2<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Parameter**<br>Conducted<br>Radiated<br>Voltage Flicker<br>**Standard**<br>EN55032(CISPR32)<br>**Test Level / Note**<br>Class A<br>-------<br>EN61000-3-3<br>Class A<br>**Parameter**<br>ESD<br>Radiated Susceptibility<br>EFT/Burest<br>Surge<br>**Standard**<br>EN61000-4-2<br>**Test Level /Note**<br>Level 3, 8KV air; Level 2, 4KV contact, criteria A<br>Level 4, 2KV/Vin+ ~ Vin-, criteria A<br>Conducted<br>Magnetic Field<br>EN61000-4-3<br>EN61000-4-4<br>EN61000-4-6<br>EN61000-4-5<br>EN61000-4-8<br>EN61000-4-11<br>Voltage Dips and interruptions<br>Level 3, 10V, criteria A<br>Level 3, 2KV, criteria A<br>Level 3, 10V, criteria A<br>Level 4, 30A, criteria A<br>EN55032(CISPR32)<br>＞<br>.<br>95% dip 0 5 periods, 30% dip 25 periods,<br>95% interruptions 250 periods<br>＞<br>**REVERSE POLARITY**<br>**DC INPUT**<br>**UNDER VOLTAGE LOCKOUT**<br>By internal Bridge Diode, no damage, recovers automatically after fault condition removed<br>Under voltage protection range:120 ~ 130Vdc , Under voltage release range:130 ~ 146.5Vdc<br>**OVER VOLTAGE CATEGORY**<br>**OPERATING ALTITUDE Note.5**<br>Ⅱ; According to EN62109-1; altitude up to 5000 meters<br>5000 meters /OVCⅡ<br>**DDRH-60-12**<br>12V<br>5A<br>0<br>5A<br>~<br>60W<br>120mVp-p<br>12<br>15V<br>~<br>±1.5%<br>±0.5%<br>±0.5%<br>80%<br>81%<br>76%<br>83%<br>85%<br>81%<br>86%<br>87%<br>84%<br>87%<br>88%<br>83%<br>16.5<br>21V<br>~<br>**EXTERNAL CAPACITANCE LOAD (Max.)** 6000<br>F<br>μ<br>4000<br>F<br>μ<br>2500<br>F<br>μ<br>1000<br>F<br>μ<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>**200Vdc**<br>**800Vdc**<br>**1500Vdc**<br>~~GO~~<br>Re~~GG~~<br>~~OO~~<br>~~OO~~<br>~~GC~~<br>~~GG~~<br>Re~~OG~~<br>~~GC~~<br>~~OG~~<br>~~(~~<br>~~GG~~<br>I<br>a~~eG~~<br>~~GC~~<br>~~a~~<br>a~~a~~se<br>~~|~~<br>a ~~|~~<br>Ce<br>aa<br>Re<br>I<br>a<br>Re<br>Rs<br>a<br>a<br>a ~~eG~~<br>a<br>~~Re~~<br>a<br>a ~~Q~~<br>~~eG~~<br>~~eG~~<br>a<br>~~O~~<br>~~a~~<br>~~O~~<br>~~eG~~<br>~~Re~~<br>Re<br>I<br>Rn<br>1. All parameters NOT specially mentioned are measured at 600Vdc input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated witha0.<br>&4 _<br>parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500ft).<br>6. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|**DDRH-60-5**<br>**DDRH-60-24**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (max.)**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**DC OK SIGNAL**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>5V<br>24V<br>10A<br>2.5A<br>0<br>10A<br>~<br>0<br>2.5A<br>~<br>50W<br>60W<br>100mVp-p<br>150mVp-p<br>5<br>6V<br>~<br>24<br>29V<br>~<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±1.5%<br>±0.5%<br>150<br>1500Vdc<br>~<br>COLD START<br>120A /1500Vdc       80A/800Vdc        30A/150Vdc<br>105 ~ 135% rated output power<br>6.6<br>8.4V<br>~<br>30<br>38V<br>~<br>Protection type : Hiccup up mode when output voltage<55%, recovers automatically after condition is removed;<br>Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>IEC62109-1<br>approved; Design refer to UL1741(By request)<br>(LVD) , EAC TP TC 004<br>-30<br>+80<br>(Refer to "Derating Curve")<br>~<br>℃<br>Relay contact rating(max.) : 30V / 1A resistive<br>20<br>90% RH non-condensing<br>~<br>-40<br>+80<br>, 10<br>95%  RH non-condensing<br>~<br>~<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6<br>454.5K hrs min.      MIL-HDBK-217F (25<br>);             503K hrs min.<br>℃<br>℃<br>Telcordia TR/SR-332 (Bellcore) (25<br>)<br>**DDRH-60-48**<br>48V<br>1.25A<br>0<br>1.25A<br>~<br>60W<br>200mVp-p<br>48<br>54V<br>~<br>±1.0%<br>±0.5%<br>±0.5%<br>55<br>60V<br>~<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note.7)**<br>**PROTECTION**<br>℃<br>℃<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4KVAC      O/P-DC OK:0.5KVAC<br>I/P-O/P, 100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**FUNCTION**<br>57*93.5*105mm (W*H*D)<br>0.8Kg; 16pcs/12.8Kg/0.82CUFT<br>EN55035, EN61000-6-2<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Parameter**<br>Conducted<br>Radiated<br>Voltage Flicker<br>**Standard**<br>EN55032(CISPR32)<br>**Test Level / Note**<br>Class A<br>-------<br>EN61000-3-3<br>Class A<br>**Parameter**<br>ESD<br>Radiated Susceptibility<br>EFT/Burest<br>Surge<br>**Standard**<br>EN61000-4-2<br>**Test Level /Note**<br>Level 3, 8KV air; Level 2, 4KV contact, criteria A<br>Level 4, 2KV/Vin+ ~ Vin-, criteria A<br>Conducted<br>Magnetic Field<br>EN61000-4-3<br>EN61000-4-4<br>EN61000-4-6<br>EN61000-4-5<br>EN61000-4-8<br>EN61000-4-11<br>Voltage Dips and interruptions<br>Level 3, 10V, criteria A<br>Level 3, 2KV, criteria A<br>Level 3, 10V, criteria A<br>Level 4, 30A, criteria A<br>EN55032(CISPR32)<br>＞<br>.<br>95% dip 0 5 periods, 30% dip 25 periods,<br>95% interruptions 250 periods<br>＞<br>**REVERSE POLARITY**<br>**DC INPUT**<br>**UNDER VOLTAGE LOCKOUT**<br>By internal Bridge Diode, no damage, recovers automatically after fault condition removed<br>Under voltage protection range:120 ~ 130Vdc , Under voltage release range:130 ~ 146.5Vdc<br>**OVER VOLTAGE CATEGORY**<br>**OPERATING ALTITUDE Note.5**<br>Ⅱ; According to EN62109-1; altitude up to 5000 meters<br>5000 meters /OVCⅡ<br>**DDRH-60-12**<br>12V<br>5A<br>0<br>5A<br>~<br>60W<br>120mVp-p<br>12<br>15V<br>~<br>±1.5%<br>±0.5%<br>±0.5%<br>80%<br>81%<br>76%<br>83%<br>85%<br>81%<br>86%<br>87%<br>84%<br>87%<br>88%<br>83%<br>16.5<br>21V<br>~<br>**EXTERNAL CAPACITANCE LOAD (Max.)** 6000<br>F<br>μ<br>4000<br>F<br>μ<br>2500<br>F<br>μ<br>1000<br>F<br>μ<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>**200Vdc**<br>**800Vdc**<br>**1500Vdc**<br>~~GO~~<br>Re~~GG~~<br>~~OO~~<br>~~OO~~<br>~~GC~~<br>~~GG~~<br>Re~~OG~~<br>~~GC~~<br>~~OG~~<br>~~(~~<br>~~GG~~<br>I<br>a~~eG~~<br>~~GC~~<br>~~a~~<br>a~~a~~se<br>~~|~~<br>a ~~|~~<br>Ce<br>aa<br>Re<br>I<br>a<br>Re<br>Rs<br>a<br>a<br>a ~~eG~~<br>a<br>~~Re~~<br>a<br>a ~~Q~~<br>~~eG~~<br>~~eG~~<br>a<br>~~O~~<br>~~a~~<br>~~O~~<br>~~eG~~<br>~~Re~~<br>Re<br>I<br>Rn<br>1. All parameters NOT specially mentioned are measured at 600Vdc input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated witha0.<br>&4 _<br>parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500ft).<br>6. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|**DDRH-60-5**<br>**DDRH-60-24**<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (max.)**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**DC OK SIGNAL**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>5V<br>24V<br>10A<br>2.5A<br>0<br>10A<br>~<br>0<br>2.5A<br>~<br>50W<br>60W<br>100mVp-p<br>150mVp-p<br>5<br>6V<br>~<br>24<br>29V<br>~<br>±1.5%<br>±1.0%<br>±0.5%<br>±0.5%<br>±1.5%<br>±0.5%<br>150<br>1500Vdc<br>~<br>COLD START<br>120A /1500Vdc       80A/800Vdc        30A/150Vdc<br>105 ~ 135% rated output power<br>6.6<br>8.4V<br>~<br>30<br>38V<br>~<br>Protection type : Hiccup up mode when output voltage<55%, recovers automatically after condition is removed;<br>Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>IEC62109-1<br>approved; Design refer to UL1741(By request)<br>(LVD) , EAC TP TC 004<br>-30<br>+80<br>(Refer to "Derating Curve")<br>~<br>℃<br>Relay contact rating(max.) : 30V / 1A resistive<br>20<br>90% RH non-condensing<br>~<br>-40<br>+80<br>, 10<br>95%  RH non-condensing<br>~<br>~<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)<br>Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6<br>454.5K hrs min.      MIL-HDBK-217F (25<br>);             503K hrs min.<br>℃<br>℃<br>Telcordia TR/SR-332 (Bellcore) (25<br>)<br>**DDRH-60-48**<br>48V<br>1.25A<br>0<br>1.25A<br>~<br>60W<br>200mVp-p<br>48<br>54V<br>~<br>±1.0%<br>±0.5%<br>±0.5%<br>55<br>60V<br>~<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**(Note.7)**<br>**PROTECTION**<br>℃<br>℃<br>℃<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:4KVAC      O/P-DC OK:0.5KVAC<br>I/P-O/P, 100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**FUNCTION**<br>57*93.5*105mm (W*H*D)<br>0.8Kg; 16pcs/12.8Kg/0.82CUFT<br>EN55035, EN61000-6-2<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**Parameter**<br>Conducted<br>Radiated<br>Voltage Flicker<br>**Standard**<br>EN55032(CISPR32)<br>**Test Level / Note**<br>Class A<br>-------<br>EN61000-3-3<br>Class A<br>**Parameter**<br>ESD<br>Radiated Susceptibility<br>EFT/Burest<br>Surge<br>**Standard**<br>EN61000-4-2<br>**Test Level /Note**<br>Level 3, 8KV air; Level 2, 4KV contact, criteria A<br>Level 4, 2KV/Vin+ ~ Vin-, criteria A<br>Conducted<br>Magnetic Field<br>EN61000-4-3<br>EN61000-4-4<br>EN61000-4-6<br>EN61000-4-5<br>EN61000-4-8<br>EN61000-4-11<br>Voltage Dips and interruptions<br>Level 3, 10V, criteria A<br>Level 3, 2KV, criteria A<br>Level 3, 10V, criteria A<br>Level 4, 30A, criteria A<br>EN55032(CISPR32)<br>＞<br>.<br>95% dip 0 5 periods, 30% dip 25 periods,<br>95% interruptions 250 periods<br>＞<br>**REVERSE POLARITY**<br>**DC INPUT**<br>**UNDER VOLTAGE LOCKOUT**<br>By internal Bridge Diode, no damage, recovers automatically after fault condition removed<br>Under voltage protection range:120 ~ 130Vdc , Under voltage release range:130 ~ 146.5Vdc<br>**OVER VOLTAGE CATEGORY**<br>**OPERATING ALTITUDE Note.5**<br>Ⅱ; According to EN62109-1; altitude up to 5000 meters<br>5000 meters /OVCⅡ<br>**DDRH-60-12**<br>12V<br>5A<br>0<br>5A<br>~<br>60W<br>120mVp-p<br>12<br>15V<br>~<br>±1.5%<br>±0.5%<br>±0.5%<br>80%<br>81%<br>76%<br>83%<br>85%<br>81%<br>86%<br>87%<br>84%<br>87%<br>88%<br>83%<br>16.5<br>21V<br>~<br>**EXTERNAL CAPACITANCE LOAD (Max.)** 6000<br>F<br>μ<br>4000<br>F<br>μ<br>2500<br>F<br>μ<br>1000<br>F<br>μ<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>**200Vdc**<br>**800Vdc**<br>**1500Vdc**<br>~~GO~~<br>Re~~GG~~<br>~~OO~~<br>~~OO~~<br>~~GC~~<br>~~GG~~<br>Re~~OG~~<br>~~GC~~<br>~~OG~~<br>~~(~~<br>~~GG~~<br>I<br>a~~eG~~<br>~~GC~~<br>~~a~~<br>a~~a~~se<br>~~|~~<br>a ~~|~~<br>Ce<br>aa<br>Re<br>I<br>a<br>Re<br>Rs<br>a<br>a<br>a ~~eG~~<br>a<br>~~Re~~<br>a<br>a ~~Q~~<br>~~eG~~<br>~~eG~~<br>a<br>~~O~~<br>~~a~~<br>~~O~~<br>~~eG~~<br>~~Re~~<br>Re<br>I<br>Rn<br>1. All parameters NOT specially mentioned are measured at 600Vdc input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated witha0.<br>&4 _<br>parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500ft).<br>6. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|**DDRH-60-5**|**DDRH-60-12**|**DDRH-60-12**|**DDRH-60-24**|**DDRH-60-24**|**DDRH-60-48**|
|---|---|---|---|---|---|---|---|---|---|
||**DC VOLTAGE**<br>~~GO~~<br>Re~~GG~~|||5V<br>~~GO~~<br>~~GG~~|12V<br>~~GO~~<br>~~GG~~||24V<br>~~GO~~<br>~~GG~~||48V<br>~~GO~~<br>~~GG~~|
||**RATED CURRENT**<br>~~GO~~<br>Re~~GG~~|||10A<br>~~GO~~<br>~~GG~~|5A<br>~~GO~~<br>~~GG~~||2.5A<br>~~GO~~<br>~~GG~~||1.25A<br>~~GO~~<br>~~GG~~|
||**CURRENT RANGE**<br>Re~~GG~~<br>~~OO~~|||0<br>10A<br>~<br>~~GG~~<br>~~OO~~|0<br>5A<br>~<br>~~GG~~<br>~~OO~~||0<br>2.5A<br>~<br>~~GG~~<br>~~OO~~||0<br>1.25A<br>~<br>~~GG~~<br>~~OO~~|
||**RATED POWER**<br>~~OO~~<br>~~OO~~|||50W<br>~~OO~~<br>~~OO~~|60W<br>~~OO~~<br>~~OO~~||60W<br>~~OO~~<br>~~OO~~||60W<br>~~OO~~<br>~~OO~~|
||**RIPPLE & NOISE (max.) Note.2**<br>~~OO~~<br>~~GC~~|||100mVp-p<br>~~OO~~<br>~~GC~~|120mVp-p<br>~~OO~~<br>~~GC~~||150mVp-p<br>~~OO~~<br>~~GC~~||200mVp-p<br>~~OO~~<br>~~GC~~|
||**VOLTAGE ADJ. RANGE**<br>~~GC~~<br>~~GG~~<br>Re~~OG~~|||5<br>6V<br>~<br>~~GC~~<br>~~GG~~<br>~~OG~~|12<br>15V<br>~<br>~~GC~~<br>~~GG~~<br>~~OG~~||24<br>29V<br>~<br>~~GC~~<br>~~GG~~<br>~~OG~~||48<br>54V<br>~<br>~~GC~~<br>~~GG~~<br>~~OG~~|
||**VOLTAGE TOLERANCE Note.3**<br>~~GG~~<br>Re~~OG~~|||±1.5%<br>~~GG~~<br>~~OG~~|±1.5%<br>~~GG~~<br>~~OG~~||±1.0%<br>~~GG~~<br>~~OG~~||±1.0%<br>~~GG~~<br>~~OG~~|
||**LINE REGULATION**<br>Re~~OG~~<br>~~GC~~|||±0.5%<br>~~OG~~<br>~~GC~~|±0.5%<br>~~OG~~<br>~~GC~~||±0.5%<br>~~OG~~<br>~~GC~~||±0.5%<br>~~OG~~<br>~~GC~~<br>~~(~~|
||**LOAD REGULATION**<br>~~GC~~<br>~~OG~~|||±1.5%<br>~~GC~~<br>~~OG~~|±0.5%<br>~~GC~~<br>~~OG~~||±0.5%<br>~~GC~~<br>~~OG~~||±0.5%<br>~~GC~~<br>~~OG~~<br>~~(~~|
||**EXTERNAL CAPACITANCE LOAD (Max.)** <br>~~OG~~<br>~~GG~~<br>I<br>a~~eG~~|||6000<br>F<br>μ<br>~~OG~~<br>~~GG~~<br>~~eG~~|4000<br>F<br>μ<br>~~OG~~<br>~~GG~~<br>~~eG~~||2500<br>F<br>μ<br>~~OG~~<br>~~GG~~<br>~~eG~~||1000<br>F<br>μ<br>~~OG~~<br>~~(~~<br>~~GG~~<br>~~eG~~|
||**VOLTAGE RANGE**<br>**Note.4**<br>I<br>a~~eG~~|||150<br>1500Vdc<br>~<br>~~eG~~||||||
||**EFFICIENCY (Typ.)**<br>I<br>a||**200Vdc**<br>**800Vdc**<br>**1500Vdc**<br>a~~eG~~<br>~~GC~~<br>~~a~~<br>|80%<br>81%<br>76%<br>~~eG~~<br>~~GC~~<br>~~a~~<br>|83%<br>85%<br>81%<br>~~eG~~<br>~~GC~~<br>||86%<br>87%<br>84%<br>~~eG~~<br>~~GC~~<br>||87%<br>88%<br>83%<br>~~eG~~<br>~~GC~~<br>|
||**INRUSH CURRENT (max.)**<br>~~a~~<br>a|||COLD START<br>120A /1500Vdc       80A/800Vdc        30A/150Vdc<br>~~a~~<br>||||||
||**OVERLOAD**<br>~~a~~<br>a~~a~~|||105 ~ 135% rated output power<br>Protection type : Hiccup up mode when output voltage<55%, recovers automatically after condition is removed;<br>Constant current limiting, recovers automatically after fault condition is removed within 55% ~ 100% rated output voltage<br>~~a~~<br>||||||
||**OVER VOLTAGE**<br>~~a~~se<br>~~|~~|||6.6<br>8.4V<br>~<br>30<br>38V<br>~<br>Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>55<br>60V<br>~<br>16.5<br>21V<br>~<br>se<br>~~|~~||||||
||**OVER TEMPERATURE**<br>a|||Protection type : Hiccup up mode, recovers automatically after fault condition is removed<br>||||||
||**DC INPUT**<br>a|**REVERSE POLARITY**<br>**UNDER VOLTAGE LOCKOUT**<br>a ~~|~~<br>Ce||By internal Bridge Diode, no damage, recovers automatically after fault condition removed<br>Under voltage protection range:120 ~ 130Vdc , Under voltage release range:130 ~ 146.5Vdc<br>~~|~~<br>Ce||||||
||**DC OK SIGNAL**<br>Ce<br>|||Relay contact rating(max.) : 30V / 1A resistive<br>Ce||||||
||**WORKING TEMP.**<br>a<br>Re|||-30<br>+80<br>(Refer to "Derating Curve")<br>~<br>℃||||||
||**WORKING HUMIDITY**<br>a<br>Re<br>I|||20<br>90% RH non-condensing<br>~||||||
||**STORAGE TEMP., HUMIDITY**<br>Re<br>I<br>a|||-40<br>+80<br>, 10<br>95%  RH non-condensing<br>~<br>~<br>℃||||||
||**TEMP. COEFFICIENT**<br>I<br>a|||±<br>℃<br>℃<br>0.03%/<br>(0 ~ 55<br>)||||||
||**VIBRATION**<br>a<br>Re|||Component: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6||||||
||**OPERATING ALTITUDE Note.5**<br>Re<br>Rs|||5000 meters /OVCⅡ||||||
||**OVER VOLTAGE CATEGORY**<br>Re<br>Rs<br>a|||Ⅱ; According to EN62109-1; altitude up to 5000 meters||||||
||**SAFETY STANDARDS**<br>Rs<br>a<br>a|||IEC62109-1<br>approved; Design refer to UL1741(By request)<br>(LVD) , EAC TP TC 004||||||
||**WITHSTAND VOLTAGE**<br>a<br>a|||I/P-O/P:4KVAC      O/P-DC OK:0.5KVAC||||||
||**MTBF**<br>**ISOLATION RESISTANCE**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>a<br>a ~~eG~~<br>a<br>~~Re~~<br>a<br>a<br>~~eG~~<br>~~eG~~<br>a<br>~~a~~<br>~~eG~~<br>~~Re~~<br>Re<br>I|||I/P-O/P, 100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>||||||
|||||**Parameter**<br>~~eG~~||**Standard**<br>~~eG~~||**Test Level / Note**<br>~~eG~~||
|||||Conducted||EN55032(CISPR32)||Class A||
|||||Radiated<br>a||EN55032(CISPR32)||Class A||
|||||Voltage Flicker<br>~~Re~~||EN61000-3-3<br>~~Re~~||-------<br>~~Re~~||
|||||EN55035, EN61000-6-2<br>a||||||
|||||**Parameter**<br>a ~~Q~~||**Standard**<br>~~Q~~||**Test Level /Note**<br>~~Q~~||
|||||ESD<br>a <br>~~eG~~||EN61000-4-2<br><br>~~eG~~||Level 3, 8KV air; Level 2, 4KV contact, criteria A<br><br>~~eG~~||
|||||Radiated Susceptibility<br>~~eG~~<br>~~eG~~||EN61000-4-3<br>~~eG~~<br>~~eG~~||Level 3, 10V, criteria A<br>~~eG~~<br>~~eG~~||
|||||EFT/Burest<br>a||EN61000-4-4<br>~~O~~||Level 3, 2KV, criteria A<br>~~O~~||
|||||Surge<br>~~a~~||EN61000-4-5||Level 4, 2KV/Vin+ ~ Vin-, criteria A<br>~~O~~||
|||||Conducted<br>~~a~~<br>~~eG~~||EN61000-4-6<br>~~eG~~||Level 3, 10V, criteria A<br>~~O~~<br>~~eG~~||
|||||Magnetic Field<br>~~Re~~||EN61000-4-8<br>~~Re~~||Level 4, 30A, criteria A<br>~~Re~~||
|||||Voltage Dips and interruptions||EN61000-4-11||＞<br>.<br>95% dip 0 5 periods, 30% dip 25 periods,<br>95% interruptions 250 periods<br>＞||
|||||454.5K hrs min.      MIL-HDBK-217F (25<br>);             503K hrs min.<br>℃<br>℃<br>Telcordia TR/SR-332 (Bellcore) (25<br>)||||||
||**DIMENSION**<br>Re<br>I<br>Rn|||57*93.5*105mm (W*H*D)||||||
||**PACKING**<br>℃<br>℃<br>℃<br>0.8Kg; 16pcs/12.8Kg/0.82CUFT<br>I<br>Rn<br>1. All parameters NOT specially mentioned are measured at 600Vdc input, rated load and 25 _of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated witha0.<br>&4 _<br>parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the derating curve for more details.<br>5. The ambient temperature derating of 3.5<br>/1000m with fanless models and of<br>5<br>/1000m with fan models for operating altitude higher than<br>2000m(6500ft).<br>6. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with<br>full power. In case the adjacent device is a heat source, 15mm clearance is recommended.<br>7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http:/Wwww.meanwell.com)|||||||||



_File Name:DDRH-60-SPEC   2019-12-27_ 

**-** 60W Ultra Wide Input  DIN Rail Type DC-DC Converter **DDRH 60 series** 

**==> picture [480 x 596] intentionally omitted <==**

**----- Start of picture text -----**<br>
Block Diagram<br>fosc : 65KHz<br>DC OK<br>EMI INPUT POWER RECTIFIERS +V<br>I/P FILTER REVERSE SWITCHING & -V<br>FILTER<br>O.C.P.<br>O.V.P.<br>O.L.P. CONTROL<br>DETECTION<br>O.T.P.<br>CIRCUIT<br>U.V.P.<br>Derating Curve<br>100<br>70<br>50<br>30<br>-30 0 10 20 30 40 50 55 60 65 70 80 85 (VERTICAL)<br>AMBIENT TEMPERATURE ( ℃ )<br>Static Characteristics<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>150 200 300 400 500 600 700 800 900 1000 1100 1400 1500 (Vdc)<br>INPUT VOLTAGE<br>LOAD (%)<br>LOAD (%)<br>**----- End of picture text -----**<br>


||**DC OK Relay Contact**|**DC OK Relay Contact**|||
|---|---|---|---|---|
||||||
|||Contact Close||PSU turns ON / DC OK.|
|||Contact Open||PSU turns OFF / DC Fail.|
|||Contact Ratings (max.)||30V/1A resistive load.|



_File Name:DDRH-60-SPEC   2019-12-27_ 

**-** 60W Ultra Wide Input  DIN Rail Type DC-DC Converter **DDRH 60 series** 

## **Mechanical Specification** 

**==> picture [426 x 224] intentionally omitted <==**

**----- Start of picture text -----**<br>
Case No.DDRH-60        Unit:mm<br>57 105<br>5.08<br>+Vo +Vo -Vo -Vo<br>DC OK<br>DC OK<br>+<br>+V ADJ<br>-Vin +Vin<br>28.52<br>93.5<br>**----- End of picture text -----**<br>


## **External FUSE wiring instruction** 

External FUSE is required.FUSE specification: 4A/1500Vdc. 

**==> picture [436 x 333] intentionally omitted <==**

**----- Start of picture text -----**<br>
Suggested model: FUSE Holder<br>DC OK<br>Manufacturer Part NO. MW's  Order NO.<br>Fuse Brand<br>Fuse Fuse Holder Fuse + Fuse Holder<br>WalterFuse WJ30-4 WJ30-H DDRH-WJ30-4-H +Vo +Vo -Vo -Vo DC OK<br>Littelfuse SPXV-4A LFPXV/LPXV Not provide DC OK +<br>Bussmann PV-4A10F85L CHPV15L85 Not provide +V ADJ LOAD<br>-Vin +Vin<br>+Vin<br>DC IN<br>-Vin<br>Installation Instruction<br>ADMISSIBLE DIN-RAIL:TS35/7.5 or TS35/15<br>(For reference only. Not included with unit.)<br>Back View<br>35<br>**----- End of picture text -----**<br>


## **Installation Manual** 

**Please refer to : http://www.meanwell.com/manual.html** 

_File Name:DDRH-60-SPEC   2019-12-27_
Updated at April 22, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →