DD-9664FC-2A

## **OLED DISPLAY MODULE** 

## **Product Specification** 

**==> picture [333 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
CUSTOMER  STANDARD<br>PRODUCT<br>DD-9664FC-2A<br>NUMBER<br>CUSTOMER<br>APPROVAL<br>**----- End of picture text -----**<br>


**==> picture [257 x 100] intentionally omitted <==**

**----- Start of picture text -----**<br>
INTERNAL APPROVALS<br>Product Mgr  Doc Control  Electr. Eng<br>Bruno  Anthony  Bazile<br>Recaldini  Perkins  Peter<br>Date: 01/02/07  Date: 01/02/07  Date: 01/02/07<br>**----- End of picture text -----**<br>


DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED FORM NO: 0199 Issue 2.0 

|TABLE OF CONTENTS<br>DENSITRON|TABLE OF CONTENTS<br>DENSITRON|
|---|---|
|**1**|**MAIN FEATURES .......................................................................................................... 4**|
|**2**|**MECHANICAL SPECIFICATION............................................................................... 5**|
||2.1<br>MECHANICAL CHARACTERISTICS.................................................................... 5|
||2.2<br>MECHANICAL DRAWING..................................................................................... 6|
|**3**|**ELECTRICAL SPECIFICATION................................................................................. 7**|
||3.1<br>ABSOLUTE MAXIMUM RATINGS ....................................................................... 7|
||3.2<br>ELECTRICAL CHARACTERISTICS ...................................................................... 8|
||3.3 INTERFACE PIN ASSIGNMENT .................................................................................. 9|
||3.4 BLOCK DIAGRAM....................................................................................................... 11|
||3.5 TIMING CHARACTERISTICS .................................................................................... 12|
|**4**|**OPTICAL SPECIFICATION....................................................................................... 15**|
||4.1<br>OPTICAL CHARACTERISTICS............................................................................ 15|
|**5**|**APPLICATION NOTES ............................................................................................... 16**|
|**6**|**SOFTWARE INITIAL SETTING ............................................................................... 19**|
|**7**|**PACKAGING AND LABELLING SPECIFICATION.............................................. 20**|
||7.1<br>PACKAGING .......................................................................................................... 20|
||7.2<br>LABELLING & MARKING.................................................................................... 21|
|**8**|**QUALITY ASSURANCE SPECIFICATION............................................................. 22**|
||8.1<br>CONFORMITY ....................................................................................................... 22|
||8.2<br>DELIVERY ASSURANCE ..................................................................................... 22|
||8.3<br>DEALING WITH CUSTOMER COMPLAINTS.................................................... 27|
|**9**|**RELIABILITY SPECIFICATION .............................................................................. 28**|
||9.1<br>CONTENTS OF RELIABILITY TESTS................................................................. 28|
||9.2<br>FAILURE CHECK STANDARD............................................................................ 28|
||9.3<br>LIFE TIME............................................................................................................... 28|
|**10**<br>**HANDLING PRECAUTIONS.................................................................................. 29**||



|Product No.|Product No.|DD-9664FC-2A|
|---|---|---|



|REV.A<br>REV.||Page|2 / 29|2 / 29|2 / 29|
|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## REVISION RECORD 

|**Rev.**|**Date**|**Page**|**Chapt.**|**Comment**|**ECR no.**|
|---|---|---|---|---|---|
|A|Feb 2007|||Production Release||



DD-9664FC-2A REV. A Product No. Page 3 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **1 MAIN FEATURES** 

|**1 MAIN FEATURES**||
|---|---|
|**ITEM**|**CONTENTS**|
|Display Format|96 (R.G.B.) x 64  Dots|
|Overall Dimensions(W*H*T)|Glass 25.70 x 22.20 x 1.5 mm|
|Active Area(W*H)|20.14 x 13.42 mm|
|Viewing Area(W*H)|22.14 x 15.42 mm|
|Display  Mode|Passive Matrix (0.95”)|
|Display Colour|65,536 Colour|
|Driving Method|1 / 64 duty|
|Driver IC|SSD1331|
|Operating temperature|-30℃~ +70℃|
|Storage temperature|-40℃~ +80℃|



DD-9664FC-2A REV. A Product No. Page 4 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **2 MECHANICAL SPECIFICATION** 

## _**2.1 MECHANICAL CHARACTERISTICS**_ 

|**ITEM**|**CHARACTERISTIC**|**UNIT**|
|---|---|---|
|Display Format|96 ( RGB x 64|Dots|
|Overall Dimensions|25.70 x 22.20 x 1.50|mm|
|Active Area(W*H)|20.14 x 13.42|mm|
|Viewing Area(W*H)|22.14 x 15.42|mm|
|Dot Size|0. 05 x (RGB) x 0.19|mm|
|Dot Pitch|0.07 x (RGB) x 0.21|mm|
|Weight|1.8|g|
|IC Controller/Driver|SSD1331||



DD-9664FC-2A REV. A Product No. Page 5 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**2.2 MECHANICAL DRAWING**_ 

**==> picture [436 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
-<br>Product No.  sOFSO (rt(Vzca (eany (wary (s21m]og)sane) DD- ae MatA)  £9°9I 966 tFLTPE 4FC-2A  Zr'SI——} REREV.V. _CORT  A  OFF. “wo is)ae= OG ‘t Eak Page  es u s gota as 6 / 29  rn 3 FF<br>(arg dey) TOFST LI é a A a 4 2 BOER<br>DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED  (221g. Putg) TORT TZ BLOT aLs) ae)jon enoo uy0 soo m lo<br>**----- End of picture text -----**<br>


## **3 ELECTRICAL SPECIFICATION** 

## _**3.1 ABSOLUTE MAXIMUM RATINGS**_ 

|**Item**|**Symbol**|**Min**|**Max**|**Unit**|**Note**|
|---|---|---|---|---|---|
|Supply Voltage|VDD|-0.3|4|V|Note 1,2|
|Driver Supply Voltage|Vcc|0|15|V||
|VCCSupply Current|ICC|-|25|mA||
|Operating Temperature|Top|-30|70|°C|-|
|Storage Temperature|Tst|-40|80|°C|-|
|Static Electricity|Be sure that you are grounded when handling displays.|||||



Note 1: All the above voltages are on the basis of “GND=0V”. 

Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of the module may occur. Also, for normal operations, it’s desirable to use this module under the conditions according to Section 3 “Electrical Characteristics”. 

DD-9664FC-2A REV. A Product No. Page 7 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**3.2 ELECTRICAL CHARACTERISTICS**_ 

## _**3.2.1 DC CHARACTERISTICS**_ 

|**Characteristics**<br>~~a~~|**Symbol**<br>~~esee~~|**Conditions**<br>~~esee~~|**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|---|
|Supply Logic<br>~~es~~<br>~~a~~<br>~~PR~~|VDD<br>~~es~~<br>~~esee~~<br>~~ee~~|~~es~~<br>~~esee~~<br>~~ee ee~~|2.4<br>~~es~~<br>~~ee~~|2.8<br>~~es~~<br>~~ee~~|3.5<br>~~es~~<br>~~ee~~|V<br>~~es~~<br>~~ee~~|
|Supply Voltage for I/O<br>pins<br>~~a~~<br>~~PR~~|VDDIO<br>~~esee~~<br>~~ee~~|~~esee~~<br>~~ee ee~~|1.6<br>~~ee~~|2.8<br>~~ee~~|3.5<br>~~ee~~|V<br>~~ee~~|
|Driver Supply Voltage<br>~~PR~~|VCC<br>~~ee~~|~~ee ee~~|-<br>~~ee~~|14.0<br>~~ee~~|-<br>~~ee~~|V<br>~~ee~~|
|Operating Current for<br>VDD<br>~~PR~~<br>~~ee~~|IDD<br>~~ee ~~<br>~~ee ~~|Note 1<br> ~~ee ee~~<br>~~eee~~|-<br>~~ee~~<br>~~eee~~<br>~~ee~~|0.2<br>~~ee ~~<br>~~eee~~<br>~~ee~~|0.6<br> ~~ee~~<br>~~eee~~<br>~~ee~~|mA<br>~~ee~~<br>~~eee~~|
|||Note 2<br> ~~eee~~<br>~~ee~~|-<br>~~eee~~<br>~~ee~~<br>~~ee~~|0.2<br>~~eee~~<br>~~ee~~<br>~~ee~~|0.6<br>~~eee~~<br>~~ee~~<br>~~ee~~|mA<br>~~eee~~<br>~~ee~~|
|Operating Current for<br>VCC<br>~~EE~~<br>~~Se~~|ICC<br>~~EE~~<br>~~ee~~<br>|Note 1<br>~~EE~~|-<br>~~ee ~~<br>~~EE~~<br>~~ee~~|8<br> ~~ee~~<br>~~EE~~<br>~~ee~~|11<br>~~ee~~<br>~~EE~~|mA<br>~~EE~~|
|||Note 2<br>~~EE~~<br>~~ee~~<br>~~ee~~<br>|-<br>~~EE~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>|13.5<br>~~EE~~<br>~~ee~~<br>~~ee~~<br>~~ee~~<br>|18<br>~~EE~~<br>~~ee~~<br>|mA<br>~~EE~~<br>~~ee~~<br>|
|Sleep Mode Current for<br>VDD<br>~~ee~~<br>~~Se~~|IDDsleep<br>~~ee~~<br>~~ee~~<br>|~~ee~~<br>~~ee~~<br>|-<br>~~ee ~~<br>~~ee~~<br>~~ee~~<br>|1<br> ~~ee~~<br>~~ee~~<br>~~ee~~<br>|2<br>~~ee~~<br>|µA<br>~~ee~~<br>|
|Sleep Mode Current for<br>VCC<br>~~Se~~<br>~~re~~<br>~~ee~~|ICCsleep<br>~~ee~~<br>~~OO~~<br>|~~ee~~<br>~~OO~~|-<br>~~ee~~<br>~~OO~~|<2<br>~~ee~~<br>~~OO~~<br>~~ee~~|2<br>~~OO~~<br>~~ee~~|µA<br>~~OO~~<br>~~ee~~|
|High Level Input<br>~~Se ~~<br>~~re~~<br>~~ee~~<br>~~re~~|VIH<br>~~ee ~~<br> ~~OO~~<br>~~ee~~|I out = 100µA,<br>3.3MHz<br> ~~ee ~~<br>~~OO~~|0.8xVDD<br> ~~ee~~<br>~~OO~~<br>~~re~~<br>~~rr~~|-<br>~~ee~~<br>~~OO~~<br>~~re~~<br>~~ee~~|VDDIO<br>~~OO~~<br>~~re~~<br>~~ee~~|V<br>~~OO~~<br>~~re~~<br>~~ee~~|
|Low Level Input<br> <br>~~re~~<br>~~ee~~<br>~~re~~|VIL<br> ~~OO~~<br>~~ee~~||0<br>~~OO~~<br>~~rr~~|-<br>~~OO~~<br>~~ee~~|0.2xVDDIO<br>~~OO~~<br>~~ee~~|V<br>~~OO~~<br>~~ee~~|
|High Level Output<br>~~ee ~~<br>~~re~~<br>~~ee~~|VOH<br> ~~ee~~||0.9xVDDIO<br>~~rr~~<br>~~a~~<br>~~rr~~|-<br>~~ee ~~|VDDIO<br> ~~ee ~~|V<br> ~~ee~~|
|Low Level Output<br> <br>~~re~~<br>~~ee~~|VOL<br> ~~ee~~||0<br>~~rr~~<br>~~a~~<br>~~rr~~|-|0.1xVDDIO|V|



Note 1: VDD = 2.8V, VCC = 14V, Software Initial Setting follow Section. 6 “Software initial setting”, 50% Display area turn on. 

Note 2: VDD = 2.8V, VCC = 14V, Software Initial Setting follow Section. 6 “Software initial setting”, 100% Display area turn on. 

DD-9664FC-2A REV. A Product No. Page 8 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**3.3 INTERFACE PIN ASSIGNMENT**_ 

|**_3.3 INTERFACE PIN ASSIGNMENT_**|**_3.3 INTERFACE PIN ASSIGNMENT_**|**_3.3 INTERFACE PIN ASSIGNMENT_**|**_3.3 INTERFACE PIN ASSIGNMENT_**|
|---|---|---|---|
|||||
|**No.**<br>~~a~~<br>~~>>>~~|**Symbol**<br>~~a~~<br>~~>>>~~|**I/O**<br>~~>>>~~|**Function**<br>~~>>>~~|
|1<br>~~>>>~~|N.C.<br>~~>>>~~|-<br>~~>>>~~|Reserved Pin (Supporting Pin).<br>The supporting pins can reduce the influences from stresses on<br>thefunctionpins.<br>~~>>>~~|
|2<br>~~>>>~~<br>~~ee~~|VSS<br>~~>>>~~<br>~~ee~~|P<br>~~>>>~~|Ground of System.<br>This is a ground pin. It also acts as a reference for the logic pins,<br>the OLED driving voltages and the analog circuits. It must be<br>connectedto externalground.<br>~~>>>~~<br>~~ee~~|
|3<br>~~>>>~~<br>~~ee~~|VDD<br>~~>>>~~<br>~~ee~~|P<br>~~>>>~~|Power Supply for Interface Logic Level.<br>This is a voltage supply pin. It must be connected to external<br>source.<br>~~>>>~~<br>~~ee~~|
|4.<br>~~ee~~<br>~~ee~~|VDDIO<br>~~ee~~<br>~~ee~~|P<br>~~ee~~|Power Supply for Interface Logic Level.<br>It Should match with the MCU interface voltage level. VDDIO<br>mustalways be equalor lower thanVDD<br>~~ee~~<br>~~ee~~|
|5<br>~~a—_———~~|BS1<br>~~—_———~~|I<br>~~—_———~~|Communicating Protocol Select.<br>These pins are MCU interface selection input. See the following<br>table:<br>68XX-parallel<br>80XX-parallel<br>Serial<br>BS1<br>0<br>1<br>0<br>BS2<br>1<br>1<br>0<br>~~—_———~~<br>~~ee~~<br>~~ee~~|
|6<br>~~—_———~~<br>~~ee~~<br>~~ee~~|BS2<br>~~—_———~~<br>~~ee~~<br>~~ee~~|||
|7<br>~~—_———~~<br>~~ee~~<br>~~ee~~<br>~~a~~|IREF<br>~~—_———~~<br>~~ee~~<br>~~ee~~<br>~~a~~|I<br>~~—_———~~|Current Reference for Brightness Adjustment.<br>This pin is segment current reference pin. A resistor should be<br>connected between this pinand VSS. Set the currentat 10uA.<br>~~—_———~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|
|8<br>~~ee~~<br>~~ee~~<br>~~a~~|CS#<br>~~ee~~<br>~~ee~~<br>~~a~~|I|Chip Select.<br>This pin is the chip select input. The chip is enabled for MCU<br>communicationonly whenCS#is pulledlow.<br>~~ee~~<br>~~ee~~<br>~~ee~~|
|9<br>~~ee~~<br>~~a~~|RES#<br>~~ee~~<br>~~a~~|I|Power Reset for Controller and Driver.<br>This pin is reset signal input. When the pin is low, initialization<br>of the chip executed.<br>~~ee~~<br>~~ee~~|
|10<br>~~a~~|D/C#<br>~~a~~|I|Data/Command Control.<br>This pin is Data/Command control pin. When the pin is pulled<br>high, the input at D7~D0 is treated as display data. When the<br>pin is pulled low, the input at D7~D0 will be transferred to the<br>command register. For detail relationship to MCU interface<br>signal, pleaserefer totheTiming CharacteristicsDiagrams.<br>~~ee~~|
|11|R/W#(WR#)|I|Read/Write Select or Write.<br>This pin is MCU interface input. When interface to a 68XX-<br>series microprocessor, this pin will be used as the Read/Write<br>(R/W#) selection input. Pull this pin to “High” for read mode<br>and pull it to “Low” for write mode.<br>When 80XX interface mode is selected this pin will be the Write<br>(WR#) input. Data write operation is initiated when this pin is<br>pulledlow andthe CS#is pulledlow.|
|12<br>~~a~~|E(RD#)<br>~~a~~|I<br>~~ee~~|Read/ Write Enable or Read.<br>This pin is MCU interface input. When interfacing to a 68XX-<br>series microprocessor this pin will be used as the Enable (E)<br>signal. Read/Write operation is initiated when this pin is pulled<br>high and the CS# is pulled low.<br>When connecting to an 80XX-microprocessor, this pin receives<br>the Read (RD#) signal. Data read operation is initiated when this<br>pin is pulledlow and CS#is pulledlow.<br>~~ee~~|
|13~20<br>~~a~~|D0~D7<br>~~a~~|I/O<br>~~ee~~|Host Data Input / Output Bus<br>Thesepins are 8 bit bi-directional data bus to be connected to<br>~~ee~~|



||||DENSITRON|
|---|---|---|---|
||||the microprocessor’s data bus. When serial mode is selected, D1<br>will be the serial data input SDIN and D0 will be the serial clock<br>inputSCLK.|
|21|VCOMH|O|Voltage Output High Level for COM Signal.<br>The COM signal deselected voltage level. A tantalum capacitor<br>should be connected between this pinand VSS|
|22|VCC|P|Power Supply for OLED panel.<br>This is the most positive voltage supply pin of the chip. It<br>should be supplied externally.|
|23|N.C.|-|Reserved Pin (Supporting Pin).<br>The supporting pins can reduce the influences from stresses on<br>thefunctionpins.|



DD-9664FC-2A REV. A Product No. Page 10 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**3.4 BLOCK DIAGRAM**_ 

MCU Interface Selection:                 BS1 and BS2 

Pins connected to MCU interface ： D7~D0, E/RD#, R/W#, CS#, D/C# and RES# 

C1, C3, C5 : 10 μ F 

C2, C4, C6 : 0.1 μ F 

C7 4.7 μ F/20V Tntalum CAP 

R1 :        1.2M, R1 = ( Voltage at IREF – VSS) / IREF 

**==> picture [454 x 30] intentionally omitted <==**

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**3.5 TIMING CHARACTERISTICS**_ 

## _**3.5.1 AC CHARACTERISTICS**_ 

## _**3.5.1.1  68XX-Series MPU Parallel Interface Timing Characteristics:**_ 

|**Characteristics**|**Symbol**|**Min**|**Max**|**Unit**|
|---|---|---|---|---|
|Clock Cycle Time ( write cycle )<br>~~a~~|tcycle|130|-|ns|
|Control Pulse Low Width ( write cycle )<br>~~a~~<br>~~Oe~~|PWCSL<br>~~Oe~~|60<br>~~Oe~~|-<br>~~Oe~~|ns<br>~~Oe~~|
|Control Pulse High Width ( write cycle )<br>~~a~~|PWCSH|60|-|ns|
|Clock Cycle Time ( read cycle )<br>~~a~~<br>~~OOO~~|tcycle<br>~~OOO~~|200<br>~~OOO~~|-<br>~~OOO~~|ns<br>~~OOO~~|
|Control Pulse Low Width (read cycle)<br>~~a~~|PWCSL|100|-|ns|
|Control Pulse High Width (read cycle)<br>~~a~~<br>~~Oe~~|PWCSH<br>~~Oe~~|100<br>~~Oe~~|-<br>~~Oe~~|ns<br>~~Oe~~|
|Address Setup Time<br>~~a~~|tAS|0|-|ns|
|Address Hold Time<br>~~a~~|tAH|10|-|ns|
|Data Setup Time<br>~~a~~|tDSW|40|-|ns|
|Data Hold Time<br>~~a~~|tDHW|10|-|ns|
|Access Time<br>~~a~~<br>~~OOO~~|tACC<br>~~OOO~~|-<br>~~OOO~~|140<br>~~OOO~~|ns<br>~~OOO~~|
|Output Disable Time<br>~~sO~~|tACC<br>~~sO~~|-<br>~~sO~~|70<br>~~sO~~|ns<br>~~sO~~|
|Rise Time<br>~~Oe~~|tR<br>~~Oe~~|-<br>~~Oe~~|15<br>~~Oe~~|ns<br>~~Oe~~|
|Fall Time<br>~~a~~|tF|-|15|ns|



_***( VDD – VSS = 2.4V to 3.5V, VDDIO =2.4V to VDD, Ta = -40to +85˚C )**_ 

|piece|piece||{_vaicoaa<br>|p|{_vaicoaa<br>|p||||
|---|---|---|---|---|---|---|---|
||||Tac<br>.|tour||||
||ora|||||||
||||||ton|||
||Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|12 / 29|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**3.5.1.2  8080-Series MPU Parallel Interface Timing Characteristics:**_ 

|**_Timing Characteristics:_**|||||
|---|---|---|---|---|
|**Characteristics**|**Symbol**|**Min**|**Max**|**Unit**|
|Clock Cycle Time<br>~~ee~~|tcycle<br>~~ee~~|130<br>~~ee~~|-<br>~~ee~~|ns<br>~~ee~~|
|Address Setup Time<br>~~ee~~<br>~~ee~~|tAS<br>~~ee~~<br>~~ee~~|0<br>~~ee~~<br>~~ee~~|-<br>~~ee~~<br>~~ee~~|ns<br>~~ee~~<br>~~ee~~|
|Address Hold Time<br>~~ee~~|tAH<br>~~ee~~|10<br>~~ee~~|-<br>~~ee~~|ns<br>~~ee~~|
|Write Data Setup Time<br>~~ee~~|tDSW<br>~~ee~~|40<br>~~ee~~|-<br>~~ee~~|ns<br>~~ee~~|
|Write Data Hold Time<br>~~ee~~<br>~~ee~~|tDHW<br>~~ee~~<br>~~ee~~|15<br>~~ee~~<br>~~ee~~|-<br>~~ee~~<br>~~ee~~|ns<br>~~ee~~<br>~~ee~~|
|Read Data Hold Time<br>~~ee~~|tDHR<br>~~ee~~|20<br>~~ee~~|-<br>~~ee~~|ns<br>~~ee~~|
|Output Disable Time<br>~~ee~~|tOH<br>~~ee~~|-<br>~~ee~~|70<br>~~ee~~|ns<br>~~ee~~|
|Access Time<br>~~ee~~|tACC<br>~~ee~~|-<br>~~ee~~|140<br>~~ee~~|ns<br>~~ee~~|
|Chip Select Low Pulse Width (Read)<br>Chip Select Low Pulse Width (Write)|PWCSL|120<br>60|-|ns|
|Chip Select High Pulse Width (Read)<br>Chip Select High Pulse Width (Write)|PWCSH|60<br>60|-|ns|
|Rise Time<br>~~ee~~|tR<br>~~ee~~|-<br>~~ee~~|15<br>~~ee~~|ns<br>~~ee~~|
|Fall Time<br>~~ee~~|tF<br>~~ee~~|-<br>~~ee~~|15<br>~~ee~~|ns<br>~~ee~~|



_*** (VDD – VSS  2.4V to 3.5V, VDDIO = 2.4V to VDD, Ta = -40 to +85˚C )**_ 

|Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|13 / 29|13 / 29|13 / 29|
|---|---|---|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**3.5.1.3  Serial Interface Timing Characteristics:**_ 

|**Characteristics**|**Symbol**|**Min**|**Max**|**Unit**|
|---|---|---|---|---|
|Clock Cycle Time|tcycle|150|-|ns|
|Address Setup Time|tAS|40|-|ns|
|Address Hold Time|tAH|40|-|ns|
|Chip Select Setup Time|tCSS|75|-|ns|
|Chip Select Hold Time|tCSH|60|-|ns|
|Write Data Setup Time|tDSW|40|-|ns|
|Write Data Hold Time|tDHW|40|-|ns|
|Clock Low Time|tCLKL|75|-|ns|
|Clock High Time|tCLKH|75||ns|
|Rise Time|tR|-|15|ns|
|Fall Time|tF|-|15|ns|



_*** ( VDD – VSS = 2.4V to 3.5V, VDDIO = 2.4V to VDD, Ta = -40 to +85˚C )**_ 

|Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|14 / 29|14 / 29|14 / 29|
|---|---|---|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **4 OPTICAL SPECIFICATION** 

## _**4.1 OPTICAL CHARACTERISTICS**_ 

**==> picture [453 x 448] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristics  Symbol  Condition  Min  Typ  Max  Unit<br>a a ee<br>With Polarizer<br>Brightness(White)  Lbr 80  100  -  cd/m [2]<br>Note 1<br>a a  eeee<br>(X)  0.26  0.30  0.34<br>With Polarizer<br>C.I.E.(White)  -<br>(Y)  0.29  0.33  0.37<br>soe_ | |<br>(X)  0.60  0.64  0.68<br>With Polarizer<br>C.I.E.(Red)  -<br>(Y)  0.30  0.34  0.38<br>Soe<br>= _ |<br>(X)  0.28  0.32  0.36<br>With Polarizer<br>C.I.E.(Green)  -<br>(Y)  0.58  0.62  0.66<br>Soe= | |<br>(X)  0.11  0.15  0.19<br>With Polarizer<br>C.I.E.(Blue)  -<br>(Y)  0.16  0.20  0.24<br>SS<br>Frame Rate  -  100  -  F/sec<br>a ee= _ | oe<br>Dark Room<br>CR  Shown as below  -  >1:1000  -  -<br>Contrast<br>a a  eeee<br>View Angle  >160  -  -  degree<br>a a  eeeee<br>Optical measurement taken at VDD = 2.8V, VCC = 14V and software configuration follows<br>Section 6 “Software Initial Setting”<br>**----- End of picture text -----**<br>


Note 1: Brightness (Lbr) and Driver Supply Voltage (VCC) are subject to the change of the panel characteristics and the customer’s request. 

DD-9664FC-2A REV. A Product No. Page 15 / 29 REV. ~~ee eee |~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **5 APPLICATION NOTES** 

## _**5.1 COMMANDS**_ 

Please refer to the Technical Manual for the SSD1331. 

## _**5.2 POWER UP/DOWN SEQUENCE**_ 

To protect panel and extend the panel life time, the driver IC power up/down routine should include a delay period between high voltage and low voltage power sources during turn on/off. It gives the panel enough time to complete the action of charge and discharge before/after the operation. 

## **5.2.1  POWER UP SEQUENCE** ： 

VDD /VDDIO ON VCC ON Display On 

1. Power up VDD & VDDIO 

2. Send Display off command                                VCC 

3. Clear Screen 

4. Power up VCC 

5. Delay 100ms                                            VDD/ VDDIO 

(When VDD& VDDIO is stable) 

6. Send Display on command                     VSS/Ground 

## **5.2.2  POWER DOWN SEQUENCE** ： 

Display off   VCC off VDD/ VDDIO off 

1. Send Display off command 

2. Power down VCC                                                VCC 

3. Delay 100ms 

- (when VCC is reach 0 and panel is 

completely discharges)                           VDD/ VDDIO 

4. Power down VDD& VDDIO 

VSS/Ground 

## _**5.3 RESET CIRCUIT**_ 

When RES# input is low, the chip is initialized with the following status: 

1. Display is off 

2. 64MUX Display Mode 

3. Display start line is set at display RAM address 0 

4. Display offset set to 0 

5. Normal segment and display data column address and row address mapping ( SEG0 mapped to address 00H and COM0 mapped to address 00H) 

6. Column address counter is set at 0 

7. Master contrast control register is set at 0FH 

8. Individual contrast control registers of colour A, B and C are set at 80H. 

9. Shift register data clear in serial interface 

10.Normal display mode ( Equivalent to A4 command ) 

DD-9664FC-2A REV. A Product No. Page 16 / 29 REV. ~~ee eee |~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**5.4 APPLICATION EXAMPLE**_ 

Command usage and explanation of an actual example 

< Initialization Setting > 

Set Display On/Off (1010111X) 10101110=>0xAE ( Display Off) 

Set Display Mode (101001XX) 10100100=>0xA4 ( Normal Display Mode ) 

Set Display Clock Divide Ratio / Oscillator Frequency (10110011 with XXXXXXXX) 

Set Display Offset (10100010 with XXXXXXXX) Set Multiplex Ratio (11001000 with XXXXXXXX) 

Set Master Configuration (10101101 with 1000111X) 10001110=>0x8E (External VCC supply selected) 

Set Display Start Line (10100001 with XXXXXXXX) Set Segment Re-map & Data Format (10100000 with XXXXXXXX) 

Set Master Current Control (10000111 with ****XXXX) Set Contrast Control for Colour “A” (10000001 with XXXXXXXX) Set Contrast Control for Colour “B” (10000010 with XXXXXXXX) Set Contrast Control for Colour “C” (10000011 with XXXXXXXX) 

Set Pre-charge Level (10111011 with **XXXXXX) Set Second Pre-charge speed of colour A (10001010 with XXXXXXXX Set Second Pre-charge speed of Colour B (10001011 with XXXXXXXX) Set Second Pre-charge speed of Colour C (10001100 with XXXXXXXX) Set VCOMH (10111110 with 00XXXXX0) 

Set Phase 1 & 2 Period Adjustment (10110001 with XXXXXXXX) 

|Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|17 / 29|17 / 29|17 / 29|
|---|---|---|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

Set Power Saving Mode (10110000 with 000XXXXX) 

Set Display On/Off (1010111X) 10101111=> 0xAF (Display On) 

<Display Boundary Settings> Set Colum Address (00010101 with XXXXXXXX for Start & XXXXXXXX for End ) Set Row Address (01110101 with XXXXXXXX for Start & XXXXXXXX for End) 

If the noise is accidentally occurred at the displaying window during the operation, please reset the display in order to recover the display function. 

|Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|18 / 29|18 / 29|18 / 29|
|---|---|---|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **6 SOFTWARE INITIAL SETTING** 

|Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|19 / 29|19 / 29|19 / 29|
|---|---|---|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **7 PACKAGING AND LABELLING SPECIFICATION** 

## _**7.1 PACKAGING**_ 

## **7.1.1 Material** 

||**Item**|**Part code**|**Dimensions**<br>**(mm)**|**Unit weight**<br>**(kg)**|**Quantity**|
|---|---|---|---|---|---|
|1|Module|DD-9664FC-2A|25.7*22.1*1.5|0.002|2520|
|2|Tray|*****|***|0.010||
|3|Innerbox|*****|***|0.250|4|
|4|Carton|*****|***|1.100|1|
|5|Innerboxbag|*****|***|***|***|
|6|Totalweight|7.54 Kg||±5%||



## **7.1.2 Specification and quantity** 

Modules x tray Quantity per row     6 x  Quantity per column 7 = 42 Modules per box Quantity per tray     42 x Quantity of trays 15 = 630 Total no. of  modules Quantity per box 630 x Quantity of boxes 4 =  2520 

DD-9664FC-2A REV. A Product No. Page 20 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## _**7.2 LABELLING & MARKING**_ 

DENSITRON DD-9664FC-2A TW YY MM 

DD-9664FC-2A REV. A Product No. Page 21 / 29 REV. ~~I ees eee ——~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **8  QUALITY ASSURANCE SPECIFICATION** 

## _**8.1 CONFORMITY**_ 

The performance, function and reliability of the shipped products conform to the Product Specification. 

## _**8.2 DELIVERY ASSURANCE**_ 

## **8.2.1 Delivery inspection standards** 

- IPC-AA610 rev. C, class 2 electronic assemblies standard 

## **8.2.2 Zone definition** 

A   Viewing area 

B   Outside viewing area 

DD-9664FC-2A REV. A Product No. Page 22 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **8.2.3 Visual inspection** 

- Inspect under 30W fluorescent lamp leaving 50 cm between the module and the lamp and 30 cm between the module and the eye (measuring position). 

- Appearance is inspected at the best contrast voltage (best contrast is adjusted considering clearness and crosstalk on screen). 

- Inspect the module at 45° right and left, top and bottom. 

- Use the optimum viewing angle during the contrast inspection. 

**==> picture [155 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
eye<br>45° 45°<br>NK<br>**----- End of picture text -----**<br>


DD-9664FC-2A REV. A Product No. Page 23 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **8.2.4 Standard of appearance inspection** 

Units: mm 

|**Class**<br>~~ee~~|**Item**<br>~~ee~~|**Criteria**<br>~~ee~~|**Criteria**<br>~~ee~~|
|---|---|---|---|
|Minor<br>~~ee~~<br>|Packing &<br>Label<br>~~ee~~<br>~~aA~~|Outside & insidepackage<br>~~ee~~<br>~~A~~|Presence ofproduct no.,lot no., quantity<br>~~ee~~|
|Critical<br>~~a~~||Product must not be mixed with others and quantity must not be different from<br>thatindicated onthelabel<br>~~A~~||
|Major<br>~~a~~<br>~~a~~<br>~~Ln~~|Dimension<br>~~aA~~<br>~~a~~|Product dimensions must be according to specification and drawing<br>~~A~~||
|Major<br>~~Ln~~|Electrical|Product electrical characteristics must be according to specification||
|Critical<br>~~Ln~~<br>~~a ~~|OLED<br>Display<br>|Missing lines or wrong patterns on display are not allowed<br>||
|Minor<br>|Black spot,<br>white spot,<br>dust<br>|Round type: as per following drawing<br>∅= (X+Y)/2<br>Acceptable quantity<br>Size<br>ZoneA<br>ZoneB<br> ∅<0.1<br>Anynumber<br> 0.1<∅<0.2<br>3<br> 0.2<∅<0.25<br>1<br>0.25<∅<br>0<br>Any number<br>Line type: as per following drawing<br>Acceptable quantity<br>Length<br>Width<br>ZoneA<br>ZoneB<br>- -<br> W≤0.05<br>Anynumber<br>L≤2.0<br>W≤0.1<br>3<br>L>2.0<br>0<br>Any number<br>Total acceptable quantity: 3<br>X<br>Y<br>L<br>W<br> ~~ae~~<br>~~————a~~||
|Minor<br>~~a~~|Polariser<br>scratch|Scratch on protective film is permitted<br>Scratchonpolariser: same as No.1||
|Minor|Polariser<br>bubble|∅= (X+Y)/2<br>Acceptable quantity<br>Size<br>ZoneA<br>ZoneB<br> ∅<0.5<br>Anynumber<br>∅>0.5<br>0<br>Any number<br>Total acceptable quantity: 3<br>X<br>Y||



DD-9664FC-2A REV. A Product No. Page 24 / 29 ~~eee~~ REV. ~~oot~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

|||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||**Class**||**Item**|**Criteria**||||||||||||
|Minor|Minor||Segment<br>deformation|1b. Pin hole on dot matrix display<br>Acceptab<br>Size<br> a,b<<br> (a+b)/2≤0.<br> 0.5<∅<1<br>Total acceptable quantity: 7<br>2. Segments / dots with different width||||||||||||
||||||2. Segments / dots with different width|||||||||||
||||||||||Acceptable|||||||
|||||cceptab<br>a≥b<br>a<b<br>3. Alignment layer defect<br>∅= (a+b)/2<br>Acceptable<br>Size<br> ∅≤0.4<br>0.4<∅≤1.0<br>1.0<∅≤1.5<br>1.5<∅≤2.0<br>Total acceptable quantity: 7|cceptab<br>a≥b<br>a<b<br>3. Alignment layer defect||||cceptab<br>a≥b||cceptab|cceptab<br>a/b≤||a/b≤4/3||
||||||||||a<b|||a/b||a/b>4/3||
|||||||||||||||||
||||||||||Acceptable||tablequantity|||||
||||||||||Size|||||||
||||||||||∅≤0.4|||Anynumber||||
||||||||||0.4<∅≤1.0|||5||||
||||||||||∅|||3||||
|||||||1.0<∅≤1.5<br>1.5<∅≤2.0<br>Total acceptable quantity: 7|||1.0<∅≤1.5|||3||||
||||||||||1.5<∅≤2.0|||2||||
||||||||||||Total acceptable quantity: 7|||||
|Minor||Minor|Panel|||||||||||||
||||Chipping|X ≤ 1/6 Panel length<br>Y ≤ 1<br>Z ≤ T||||||||||||
|Minor|||Panel<br>Cracking|Cracks not allowed||Cracks not allowed||||||||||
||||||||Cracks not allowed|||||||||
||||||||Cracks not allowed|||||||||
|Minor|||Cupper<br>exposed<br>(pin or film)|Not allowed if visible by eye inspection||||||||||||
|Minor|||Film or<br>Trace<br>Damage|Not allowed if affects electrical function||||||||||||



DD-9664FC-2A REV. A Product No. Page 25 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

||**Class**|**Item**|**Criteria**|**Criteria**|**Criteria**|**Criteria**|
|---|---|---|---|---|---|---|
||Minor|Contact<br>Lead Twist|Not allowed<br>o<br>a<br>bh.<br>TWISTED<br>LEAD<br>{|<br>|<br>‘<br>f<br>yk<br>11<br>1!<br>.!<br>\<br>| |‘();||||
||Minor|Contact<br>Lead<br>Broken|Not allowed<br>“<br>“\-<br>A.<br>BROKEN<br>LEAD<br>éa<br>i4<br>tt<br>41<br>1I<br>\<br>4<br>Vt<br>‘<br>‘<br>N/||||
||Minor|Contact<br>Lead Bent|Not allowed if<br>bent lead causes<br>short circuit<br>~~a~~_<br>\<br>4}<br>!||||
||||Not allowed if bent lead<br>extends horizontally<br>more than 50%<br>of its width||||
||Minor|Colour<br>uniformity|Level of sample for approval set as limit sample||||
||Major|PCB|No unmelted solder|No unmelted solderpaste should bepresent on PCB|||
||Critical||Cold solderjoints, missin|oints, missingsolder connections, or oxidation are not allowed|||
||Minor||No residue or solder balls on PCB are allowed|No residue or solder balls on PCB are allowed|||
||Critical||Short circuits on com|Short circuits on components are not allowed|||
||Minor|Tray<br>particles||Size<br>Quantity|||
|||||On tray|∅<0.2|Anynumber|
|||particles|||||
||||||∅>0.25|4|
|||||On display|∅≥0.25|2|
||||||L =3|1|



|Product No.|Product No.|DD-9664FC-2A|
|---|---|---|



|REV.A<br>REV.||Page|26 / 29|26 / 29|26 / 29|
|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

_**8.3 DEALING WITH CUSTOMER COMPLAINTS**_ 

## **8.3.1 Non-conforming analysis** 

Purchaser should supply Densitron with detailed data of non-conforming sample. After accepting it, Densitron should complete the analysis in two weeks from receiving the sample. 

If the analysis cannot be completed on time, Densitron must inform the purchaser. 

## **8.3.2 Handling of non-conforming displays** 

If any non-conforming displays are found during customer acceptance inspection which Densitron is clearly responsible for, return them to Densitron. 

Both Densitron and customer should analyse the reason and discuss the handling of nonconforming displays when the reason is not clear. 

Equally, both sides should discuss and come to agreement for issues pertaining to modification of Densitron quality assurance standard. 

|Product No.|Product No.|DD-9664FC-2A|REV.A<br>REV.||Page|27 / 29|27 / 29|27 / 29|
|---|---|---|---|---|---|---|---|---|



DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **9 RELIABILITY SPECIFICATION** 

## _**9.1 CONTENTS OF RELIABILITY TESTS**_ 

|**Test Item**|**Test Condition**|**Evaluation and assessment**|
|---|---|---|
|High Temperature Operation|70°C±2, 240 hours|No abnormalities in function<br>and appearance|
|Low Temperature Operation|-30°C±2, 240 hours|No abnormalities in function<br>and appearance|
|High Temperature Storage|80°C±2, 240 hours|No abnormalities in function<br>and appearance|
|Low Temperature Storage|-40°C±2, 240 hours|No abnormalities in function<br>and appearance|
|High Temperature & High<br>Humidity Operation|60°C, 90%RH, 120 hours|No abnormalities in function<br>and appearance|
|Thermal Shock|24 cycles of<br>-40°C to 85°C,1 hourdwell|No abnormalities in function<br>and appearance|



*  The samples used for the above tests do not include polarizer. 

- No moisture condensation is observed during tests. 

## _**9.2 FAILURE CHECK STANDARD**_ 

After the completion of the described reliability test, the samples wewe left at room temperature for 2 hrs prior to conducting the failure teat at 23±5 °C ； 55±15% RH. 

## _**9.3 LIFE TIME**_ 

|**Item**|**Description**|
|---|---|
|1|Function, performance, appearance, etc. shall be free from remarkable deterioration<br>more than 10,000 hours under ordinary operating and storage conditions of room<br>temperature (25±10 °C), normal humidity (45±20% RH), and in area not exposed to<br>direct sunlight.|
|2|End of lifetime is specified as 50% of initial brightness.|



DD-9664FC-2A REV. A Product No. Page 28 / 29 REV. ~~es ee ee~~ 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED 

## **10 HANDLING PRECAUTIONS** 

## _Safety_ 

If the panel breaks, be careful not to get the organic substance in your mouth or in your eyes. If the organic substance touches your skin or clothes, wash it off immediately using soap and plenty of water. 

## _Mounting and Design_ 

Place a transparent plate (e.g. acrylic, polycarbonate or glass) on the display surface to protect the display from external pressure. Leave a small gap between the transparent plate and the display surface. 

Design the system so that no input signal is given unless the power supply voltage is applied. 

## _Caution during OLED cleaning_ 

Lightly wipe the display surface with a soft cloth soaked with Isopropyl alcohol, Ethyl alcohol or Trichlorotriflorothane. 

Do not wipe the display surface with dry or hard materials that will damage the polariser surface. Do not use aromatic solvents (toluene and xylene), or ketonic solvents (ketone and acetone). 

## _Caution against static charge_ 

As the display uses C-MOS LSI drivers, connect any unused input terminal to VDD or VSS. Do not input any signals before power is turned on. 

Also, ground your body, work/assembly table and assembly equipment to protect against static electricity. 

## _Packaging_ 

Displays use OLED elements, and must be treated as such. Avoid strong shock and drop from a height. 

To prevent displays from degradation, do not operate or store them exposed directly to sunshine or high temperature/humidity. 

## _Caution during operation_ 

It is indispensable to drive the display within the specified voltage limit since excessive voltage shortens its life. 

## _Other Precautions_ 

When a display module is operated for a long of time with fixed pattern may remain as an after image or slight contrast deviation may occur. 

Nonetheless, if the operation is interrupted and left unused for a while, normal state can be restored. Also, there will be no problem in the reliability of the module. 

## _Storage_ 

Store the display in a dark place where the temperature is 25°C ± 10°C and the humidity below 50%RH. 

Store the display in a clean environment, free from dust, organic solvents and corrosive gases. Do not crash, shake or jolt the display (including accessories). 

DD-9664FC-2A Product No. 

REV. A REV. 

Page 29 / 29 

DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED