Image not available
Illustrative purposes only
DCP4I052507GD4KSSD
Power Film Capacitor, Metallized PP, Radial Box - 4 Pin, 25 µF, ± 10%, DC Link, Through Hole
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: WIMA
- Product type: Power Film Capacitors
- ESR: 5000µohm
- SVHC: No SVHC (27-Jun-2018)
- Height: 39.5mm
- Capacitance: 25µF
- Voltage(AC): -
- Voltage(DC): 600V
- Lead Spacing: 37.5mm
- Peak Current: -
- dv/dt Rating: 19V/µs
- Output (kvar): -
- Product Range: DCP4 Series
- Product Width: 20mm
- Qualification: AEC-Q200
- Product Height: 39.5mm
- Product Length: 41.5mm
- Ripple Current: -
- Dielectric Type: Metallized PP
- Humidity Rating: -
- Product Diameter: -
- Capacitor Mounting: Through Hole
- RMS Current (Irms): -
- Capacitor Terminals: PC Pin
- Typical Applications: DC Link
- Capacitance Tolerance: ± 10%
- Capacitor Case / Package: Radial Box - 4 Pin
- Operating Temperature Max: 105°C
- Operating Temperature Min: -55°C
| Delivery and price | |
|---|---|
| Units per pack | 252 |
| Price | 5.14 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## ~~WIMA DC-LINK MKP 4~~ Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 m -_ F to 400 mF. Rated Voltages from 400 VDC to 1300 VDC. ## D <> ## Special Features ## Electrical Data Insulation resistance at +20+ C: 30 000 sec (M¸ x mF) Measuring voltage: 100 V/1 min. Test voltage: Capacitance range: 1 mF to 400 mF (intermediate values on request) - ˜ Capacitances up to 400 mF - ˜ High volume/capacitance ratio - ˜ Excellent self-healing properties Rated voltages: 400 VDC, 500 VDC, 600 VDC, 800 VDC, 900 VDC, 1100 VDC, 1300 VDC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: - ˜ Very low dissipation factor - ˜ High reliability 1.2 Ur, 2sec - ˜ 2-pin and 4-pin contact configuration (plate versions on request) Dielectric absorption: 0.05 % Specific dissipation: (plate versions on request) –55+ C to +105+ C (hot spot including Specific dissipation: ˜ AEC-Q200 qualified self-heating) Box size Specific dissipation in Watts per K ˜ According to RoHS 2011/65/EU Climatic test category: 55/085/56 W x H x L in mm above the ambient temperature in accordance with IEC ~~Typical Applications~~ Dissipation factors at +20° C: 9 x 19 x 31.5 0.021 11 x 21 x 31.5 0.025 13 x 24 x 31.5 0.030 As intermediate circuit capacitor e.g. PCM 1 kHz 10 kHz 15 x 26 x 31.5 0.034 in high power converter technology, 17 x 29 x 31.5 0.039 27.5 15 x 10[-4 ] 160 x 10[-4] power supplies, solar inverters etc. 27 x 15 x 41.5 0.043 37.5 30 x 10[-4 ] 210 x 10[-4] 17 x 34.5 x 31.5 0.044 52.5 50 x 10[-4 ] 260 x 10[-4] ~~Construction~~ 20 x 39.5 x 31.5 0.053 Voltage and current derating: 19 x 32 x 41.5 0.054 Dielectric: A derating factor of 1.35% per K must be 20 x 39.5 x 41.5 0.065 Polypropylene (PP) film applied from +85° C for DC voltages and 24 x 45.5 x 41.5 0.080 Capacitor electrodes:Vacuum-deposited ally a derating factor of 4.5% per K must be from +70° C for AC currents (Irms). Addition31 x 46 x 41.5 35 x 50 x 41.5 40 x 55 x 41.5 0.092 0.106 0.123 Internal construction: applied from +85° C for AC currents (Irms) 35 x 50 x 57 0.132 Reliability: Operational life 100 000 hours (Ur and 70) C) ) 45 x 55 x 57 45 x 65 x 57 0.164 0.184 Plastic film ~~a~~ Failure rate l0 (0.5 x Ur and 40 C) electrodeMetal contact layerVacuum-deposited P = CN [mF] x Ur [V] l0 ~~Packing~~ (schoopage) P 10 000 < 2 fit Termination 10 000 < P 25 000 < 5 fit Packing units at the end of the catalogue 25 000 < P 50 000 < 10 fit 50 000 < P 100 000 < 20 fit For further details and graphs please P > 100 000 < 30 fit refer to Technical Information. ~~is~~ Maximum pulse rise time: Encapsulation: Solvent-resistant, flame-retardant plastic PCM max. pulse rise time V/msec at TA < 40) C case with epoxy resin seal, UL 94 V-0 400 VDC 500 VDC 600 VDC 800 VDC 900 VDC 1100 VDC 1300 VDC Terminations: 27.5 11 15 27 29 35 43 50 Tinned wire (plate versions on request). 37.5 8 10 19 21 22 29 35 Marking: 52.5 5 7 13 15 18 21 25 ~~CA~~ Colour: Red. Marking: Black. for pulses equal to the rated voltage 122 D ## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ ## Continuation ## General Data **==> picture [489 x 597] intentionally omitted <==** **----- Start of picture text -----**<br> 400 VDC (70° C) / 300 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br> 1 mF 9 19 31.5 27.5 2 11 1 238.7 DCP4G041006A_ _ _ _ _ _<br> 2 „ 9 19 31.5 27.5 2 22 1.5 119.4 DCP4G042006A_ _ _ _ _ _<br> 3 „ 9 19 31.5 27.5 2 33 1.5 79.6 DCP4G043006A_ _ _ _ _ _<br> 4 „ 9 19 31.5 27.5 2 44 2 59.7 DCP4G044006A_ _ _ _ _ _<br> 5 „ 9 19 31.5 27.5 2 55 2 47.7 DCP4G045006A_ _ _ _ _ _<br> 7 „ 9 19 31.5 27.5 2 77 2.5 34.1 DCP4G047006A_ _ _ _ _ _<br> 10 mF 11 21 31.5 27.5 2/4 110 3.5 23.9 DCP4G051006B_ _ _ _ _ _<br> 15 „ 13 24 31.5 27.5 2/4 165 4.5 15.9 DCP4G051506D_ _ _ _ _ _<br> 20 „ 15 26 31.5 27.5 2/4 220 5.5 11.9 DCP4G052006F_ _ _ _ _ _<br> 25 „ 17 29 31.5 27.5 2/4 275 6.5 9.5 DCP4G052506G_ _ _ _ _ _<br> 30 „ 17 34.5 31.5 27.5 2/4 330 7 8 DCP4G053006I_ _ _ _ _ _<br> 40 „ 20 39.5 31.5 27.5 2/4 440 9.5 6 DCP4G054006J_ _ _ _ _ _<br> 50 „ 20 39.5 41.5 37.5 2/4 400 11 5.4 DCP4G055007G_ _ _ _ _ _<br> 60 „ 20 39.5 41.5 37.5 2/4 480 11.5 4.8 DCP4G056007G_ _ _ _ _ _<br> 70 „ 24 45.5 41.5 37.5 2/4 560 15 3.6 DCP4G057007H_ _ _ _ _ _<br> 80 „ 24 45.5 41.5 37.5 2/4 640 17 2.7 DCP4G058007H_ _ _ _ _ _<br> 90 „ 24 45.5 41.5 37.5 2/4 720 17.5 2.6 DCP4G059007H_ _ _ _ _ _<br>100 mF 31 46 41.5 37.5 2/4 800 19 2.5 DCP4G061007I_ _ _ _ _ _<br>120 „ 31 46 41.5 37.5 2/4 960 20 2.3 DCP4G061207I_ _ _ _ _ _<br>140 „ 35 50 41.5 37.5 2/4 1120 22.5 2.1 DCP4G061407J_ _ _ _ _ _<br>150 „ 35 50 41.5 37.5 2/4 1200 23 2 DCP4G061507J_ _ _ _ _ _<br>160 „ 40 55 41.5 37.5 2/4 1280 28 1.6 DCP4G061607K_ _ _ _ _ _<br>180 „ 40 55 41.5 37.5 2/4 1440 29.5 1.4 DCP4G061807K_ _ _ _ _ _<br>190 „ 40 55 41.5 37.5 2/4 1520 31.5 1.2 DCP4G061907K_ _ _ _ _ _<br>200 „ 40 55 41.5 37.5 2/4 1600 32.5 1.2 DCP4G062007K_ _ _ _ _ _<br>220 „ 35 50 57 52.5 4 1100 27 1.8 DCP4G062209F_ _ _ _ _ _<br>250 „ 45 55 57 52.5 4 1250 32 1.6 DCP4G062509H_ _ _ _ _ _<br>270 „ 45 55 57 52.5 4 1350 33.5 1.5 DCP4G062709H_ _ _ _ _ _<br>300 „ 45 55 57 52.5 4 1500 35 1.3 DCP4G063009H_ _ _ _ _ _<br>330 „ 45 65 57 52.5 4 1650 37 1.2 DCP4G063309J_ _ _ _ _ _<br>350 „ 45 65 57 52.5 4 1750 40 1.1 DCP4G063509J_ _ _ _ _ _<br>370 „ 45 65 57 52.5 4 1850 41.5 1.1 DCP4G063709J_ _ _ _ _ _<br>400 „ 45 65 57 52.5 4 2000 43 1 DCP4G064009J_ _ _ _ _ _<br> * General guide [2-pin version]<br>* Permissible Irms at 10° C internal temperature rise (general guide) PCM d<br> 27.5 0.8<br>** PCM = Printed circuit module = pin spacing 37.5 1<br>Dims. in mm.<br> W PCM b d c<br> Part number completion: 11 27.5 5 0.8 0.4<br>pin 13 27.5 7.5 0.8 0.4<br> Version code: 2-pin = D2<br>4-pin = D4 [4-pin version] 15 27.5 7.5 0.8 0.4<br> Tolerance: 20 % = M 17 27.5 10 0.8 0.4<br>10 % = K 20 27.5 12.5 0.8 0.4<br> 5 % = J 20 37.5 12.5 1 0.4<br> Packing: bulk = S 24 37.5 12.5 1 0.4<br> Pin length: 6-2 = SD 31 37.5 20 1 0.4<br> 35 37.5 20 1 0.4<br> Taped version see page 149.<br> 40 37.5 20 1 0.4<br> 35 52.5 20 1.2 0.8<br>pin pin 45 52.5 20 1.2 0.8<br>Rights reserved to amend design data without prior notification. c c<br>**----- End of picture text -----**<br> Continuation page 124 123 D ## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ ## Continuation ## General Data **==> picture [490 x 597] intentionally omitted <==** **----- Start of picture text -----**<br> 500 VDC (70° C) / 400 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br> 1 mF 9 19 31.5 27.5 2 15 1 238.7 DCP4H141006A_ _ _ _ _ _<br> 2 „ 9 19 31.5 27.5 2 30 1.5 119.4 DCP4H142006A_ _ _ _ _ _<br> 3 „ 9 19 31.5 27.5 2 45 1.5 79.6 DCP4H143006A_ _ _ _ _ _<br> 5 „ 9 19 31.5 27.5 2 75 2.5 47.7 DCP4H145006A_ _ _ _ _ _<br> 7 „ 11 21 31.5 27.5 2/4 105 3 34.1 DCP4H147006B_ _ _ _ _ _<br> 8 „ 13 24 31.5 27.5 2/4 120 3 29.8 DCP4H148006D_ _ _ _ _ _<br> 10 mF 13 24 31.5 27.5 2/4 150 4 23.9 DCP4H151006D_ _ _ _ _ _<br> 12 „ 15 26 31.5 27.5 2/4 180 4 19.9 DCP4H151206F_ _ _ _ _ _<br> 15 „ 17 29 31.5 27.5 2/4 225 5 15.9 DCP4H151506G_ _ _ _ _ _<br> 20 „ 17 34.5 31.5 27.5 2/4 300 6 11.9 DCP4H152006I_ _ _ _ _ _<br> 22 „ 20 39.5 31.5 27.5 2/4 330 7 10.9 DCP4H152206J_ _ _ _ _ _<br> 25 „ 20 39.5 31.5 27.5 2/4 375 7.5 9.5 DCP4H152506J_ _ _ _ _ _<br> 30 „ 20 39.5 41.5 37.5 2/4 300 9 7.9 DCP4H153007G_ _ _ _ _ _<br> 35 „ 20 39.5 41.5 37.5 2/4 350 8.5 9.1 DCP4H153507G_ _ _ _ _ _<br> 40 „ 20 39.5 41.5 37.5 2/4 400 10 5.7 DCP4H154007G_ _ _ _ _ _<br>24 45.5 41.5 37.5 2/4 400 10 8 DCP4H154007H_ _ _ _ _ _<br> 45 „ 24 45.5 41.5 37.5 2/4 450 12.5 5 DCP4H154507H_ _ _ _ _ _<br> 50 „ 24 45.5 41.5 37.5 2/4 500 13 4.8 DCP4H155007H_ _ _ _ _ _<br> 55 „ 24 45.5 41.5 37.5 2/4 550 14 4 DCP4H155507H_ _ _ _ _ _<br> 60 „ 31 46 41.5 37.5 2/4 600 14 4.7 DCP4H156007I_ _ _ _ _ _<br> 65 „ 31 46 41.5 37.5 2/4 650 16.5 3.3 DCP4H156507I_ _ _ _ _ _<br> 70 „ 31 46 41.5 37.5 2/4 700 18 2.9 DCP4H157007I_ _ _ _ _ _<br> 75 „ 31 46 41.5 37.5 2/4 750 17 3.2 DCP4H157507I_ _ _ _ _ _<br> 80 „ 31 46 41.5 37.5 2/4 800 18 2.8 DCP4H158007I_ _ _ _ _ _<br> 85 „ 35 50 41.5 37.5 2/4 850 10.5 3.2 DCP4H158507J_ _ _ _ _ _<br> 90 „ 35 50 41.5 37.5 2/4 900 21 2.4 DCP4H159007J_ _ _ _ _ _<br> 95 „ 35 50 41.5 37.5 2/4 950 21.5 2.2 DCP4H159507J_ _ _ _ _ _<br>100 mF 35 50 41.5 37.5 2/4 1000 24 1.9 DCP4H161007J_ _ _ _ _ _<br>35 50 57 52.5 4 700 18 4 DCP4H161009F_ _ _ _ _ _<br>110 „ 40 55 41.5 37.5 2/4 1100 19 2.9 DCP4H161107K_ _ _ _ _ _<br>35 50 57 52.5 4 770 19 3.6 DCP4H161109F_ _ _ _ _ _<br>120 „ 40 55 41.5 37.5 2/4 1200 22.5 2.7 DCP4H161207K_ _ _ _ _ _<br>35 50 57 52.5 4 840 20 3.3 DCP4H161209F_ _ _ _ _ _<br>130 „ 40 55 41.5 37.5 2/4 1300 23 2.4 DCP4H161307K_ _ _ _ _ _<br>35 50 57 52.5 4 910 21 3.1 DCP4H161309F_ _ _ _ _ _<br>140 „ 35 50 57 52.5 4 980 21.5 2.8 DCP4H161409F_ _ _ _ _ _<br>150 „ 35 50 57 52.5 4 1050 22.5 2.7 DCP4H161509F_ _ _ _ _ _<br>160 „ 45 55 57 52.5 4 1120 25.5 2.5 DCP4H161609H_ _ _ _ _ _<br>170 „ 45 55 57 52.5 4 1190 26.5 2.3 DCP4H161709H_ _ _ _ _ _<br>180 „ 45 55 57 52.5 4 1260 27 2.2 DCP4H161809H_ _ _ _ _ _<br>190 „ 45 55 57 52.5 4 1330 28 2.1 DCP4H161909H_ _ _ _ _ _<br>200 „ 45 55 57 52.5 4 1400 28.5 2 DCP4H162009H_ _ _ _ _ _<br>210 „ 45 55 57 52.5 4 1470 29.5 1.9 DCP4H162109H_ _ _ _ _ _<br>220 „ 45 65 57 52.5 4 1540 32 1.8 DCP4H162209J_ _ _ _ _ _<br>240 „ 45 65 57 52.5 4 1680 33.5 1.7 DCP4H162409J_ _ _ _ _ _<br> * General guide<br>* Permissible Irms at 10° C internal temperature rise (general guide)<br>** PCM = Printed circuit module = pin spacing<br>Dims. in mm.<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br> Continuation page 125 124 D ## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ ## Continuation ## General Data **==> picture [492 x 645] intentionally omitted <==** **----- Start of picture text -----**<br> 600 VDC (70° C) / 450 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms (10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br> 2 mF 9 19 31.5 27.5 2 54 2 56 DCP4I042006A_ _ _ _ _ _<br> 5 „ 13 24 31.5 27.5 2/4 135 3.5 22 DCP4I045006D_ _ _ _ _ _<br> 7 „ 15 26 31.5 27.5 2/4 189 4.5 16 DCP4I047006F_ _ _ _ _ _<br> 10 mF 17 29 31.5 27.5 2/4 270 6 11 DCP4I051006G_ _ _ _ _ _<br>27 15 41.5 37.5 2/4 190 6.5 10 DCP4I051007M_ _ _ _ _ _<br> 15 „ 17 34.5 31.5 27.5 2/4 405 7.5 7.4 DCP4I051506I_ _ _ _ _ _<br> 20 „ 20 39.5 31.5 27.5 2/4 540 9 6.2 DCP4I052006J_ _ _ _ _ _<br>20 39.5 41.5 37.5 2/4 380 10 6.2 DCP4I052007G_ _ _ _ _ _<br> 25 „ 20 39.5 41.5 37.5 2/4 475 11.5 5 DCP4I052507G_ _ _ _ _ _<br> 30 „ 24 45.5 41.5 37.5 2/4 570 14 4.1 DCP4I053007H_ _ _ _ _ _<br> 35 „ 24 45.5 41.5 37.5 2/4 665 14.5 3.8 DCP4I053507H_ _ _ _ _ _<br> 40 „ 31 46 41.5 37.5 2/4 760 16.5 3.3 DCP4I054007I_ _ _ _ _ _<br> 45 „ 31 46 41.5 37.5 2/4 855 17 3.2 DCP4I054507I_ _ _ _ _ _<br> 50 „ 35 50 41.5 37.5 2/4 950 19 2.9 DCP4I055007J_ _ _ _ _ _<br> 55 „ 35 50 41.5 37.5 2/4 1045 17 3.8 DCP4I055507J_ _ _ _ _ _<br> 60 „ 35 50 41.5 37.5 2/4 1140 17.5 3.4 DCP4I056007J_ _ _ _ _ _<br> 65 „ 40 55 41.5 37.5 2/4 1235 19.5 3.3 DCP4I056507K_ _ _ _ _ _<br>35 50 57 52.5 4 845 20 3.3 DCP4I056509F_ _ _ _ _ _<br> 70 „ 40 55 41.5 37.5 2/4 1330 20 3.1 DCP4I057007K_ _ _ _ _ _<br>35 50 57 52.5 4 910 20.5 3.1 DCP4I057009F_ _ _ _ _ _<br> 75 „ 40 55 41.5 37.5 2/4 1425 20.5 3 DCP4I057507K_ _ _ _ _ _<br>35 50 57 52.5 4 975 21 3 DCP4I057509F_ _ _ _ _ _<br> 80 „ 40 55 41.5 37.5 2/4 1520 22 2.6 DCP4I058007K_ _ _ _ _ _<br>35 50 57 52.5 4 1040 22 2.6 DCP4I058009F_ _ _ _ _ _<br> 85 „ 35 50 57 52.5 4 1105 22.5 2.1 DCP4I058509F_ _ _ _ _ _<br> 90 „ 35 50 57 52.5 4 1170 23.5 1.9 DCP4I059009F_ _ _ _ _ _<br> 95 „ 45 55 57 52.5 4 1235 24 2.8 DCP4I059509H_ _ _ _ _ _<br>100 mF 45 55 57 52.5 4 1300 25 2.6 DCP4I061009H_ _ _ _ _ _<br>110 „ 45 55 57 52.5 4 1430 26.5 2.3 DCP4I061109H_ _ _ _ _ _<br>115 „ 45 65 57 52.5 4 1495 27.5 2.5 DCP4I061159J_ _ _ _ _ _<br>120 „ 45 65 57 52.5 4 1560 28 2.3 DCP4I061209J_ _ _ _ _ _<br>130 „ 45 65 57 52.5 4 1690 29.5 2.1 DCP4I061309J_ _ _ _ _ _<br>140 „ 45 65 57 52.5 4 1820 31 1.9 DCP4I061409J_ _ _ _ _ _<br>150 „ 45 65 57 52.5 4 1950 33 1.7 DCP4I061509J_ _ _ _ _ _<br> * General guide 2-pin version<br>** PCM = Printed circuit module = pin spacing PCM d<br> 27.5 0.8<br> 37.5 1<br>Dims. in mm.<br> Part number completion: W PCM b d c<br> Version code: 2-pin = D2 11 27.5 5 0.8 0.4<br>4-pin = D4 pin 13 27.5 7.5 0.8 0.4<br> Tolerance: 20 % = M<br> 15 27.5 7.5 0.8 0.4<br>10 % = K<br> 17 27.5 10 0.8 0.4<br> 4-pin version 5 % = J 20 27.5 12.5 0.8 0.4<br> Packing: bulk = S 19 37.5 10 1 0.4<br> Pin length: 6-2 = SD<br> 20 37.5 12.5 1 0.4<br> Taped version see page 149. 24 37.5 12.5 1 0.4<br> 27 37.5 20 1 0.4<br> 31 37.5 20 1 0.4<br> 35 37.5 20 1 0.4<br> 40 37.5 20 1 0.4<br> 35 52.5 20 1.2 0.8<br>pinc pinc 45 52.5 20 1.2 0.8<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br> Continuation page 126 125 D ## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ ## Continuation ## General Data **==> picture [491 x 360] intentionally omitted <==** **----- Start of picture text -----**<br> 800 VDC (70° C) / 700 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms (10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br> 2 mF 9 19 31.5 27.5 2 58 2 52 DCP4L042006A_ _ _ _ _ _<br> 5 „ 13 24 31.5 27.5 2/4 145 4 21 DCP4L045006D_ _ _ _ _ _<br> 7 „ 17 29 31.5 27.5 2/4 203 5 15 DCP4L047006G_ _ _ _ _ _<br> 10 mF 17 34.5 31.5 27.5 2/4 290 6.5 10 DCP4L051006I_ _ _ _ _ _<br> 15 „ 20 39.5 31.5 27.5 2/4 435 9 6.9 DCP4L051506J_ _ _ _ _ _<br>20 39.5 41.5 37.5 2/4 315 9.5 6.9 DCP4L051507G_ _ _ _ _ _<br> 20 „ 20 39.5 41.5 37.5 2/4 420 10 6.2 DCP4L052007G_ _ _ _ _ _<br> 25 „ 24 45.5 41.5 37.5 2/4 525 12.5 5 DCP4L052507H_ _ _ _ _ _<br> 30 „ 24 45.5 41.5 37.5 2/4 630 14 4.1 DCP4L053007H_ _ _ _ _ _<br> 35 „ 31 46 41.5 37.5 2/4 735 15.5 3.8 DCP4L053507I_ _ _ _ _ _<br> 40 „ 31 46 41.5 37.5 2/4 840 16.5 3.3 DCP4L054007I_ _ _ _ _ _<br> 45 „ 35 50 41.5 37.5 2/4 945 17.5 3.4 DCP4L054507J_ _ _ _ _ _<br> 50 „ 35 50 41.5 37.5 2/4 1050 19 3 DCP4L055007J_ _ _ _ _ _<br> 55 „ 40 55 41.5 37.5 2/4 1155 19.5 3.2 DCP4L055507K_ _ _ _ _ _<br>35 50 57 52.5 4 825 20.4 3.2 DCP4L055509F_ _ _ _ _ _<br> 60 „ 40 55 41.5 37.5 2/4 1260 20.5 2.9 DCP4L056007K_ _ _ _ _ _<br>35 50 57 52.5 4 900 21.5 2.9 DCP4L056009F_ _ _ _ _ _<br> 65 „ 35 50 57 52.5 4 975 22.5 2.2 DCP4L056509F_ _ _ _ _ _<br> 70 „ 45 55 57 52.5 4 1050 23.5 3 DCP4L057009H_ _ _ _ _ _<br> 75 „ 45 55 57 52.5 4 1125 24 2.9 DCP4L057509H_ _ _ _ _ _<br> 80 „ 45 55 57 52.5 4 1200 24.5 3 DCP4L058009H_ _ _ _ _ _<br> 85 „ 45 65 57 52.5 4 1275 25 2.6 DCP4L058509J_ _ _ _ _ _<br> 90 „ 45 65 57 52.5 4 1350 25.5 2.5 DCP4L059009J_ _ _ _ _ _<br> 95 „ 45 65 57 52.5 4 1425 26 2.4 DCP4L059509J_ _ _ _ _ _<br>100 mF 45 65 57 52.5 4 1500 26.5 2.3 DCP4L061009J_ _ _ _ _ _<br>110 „ 45 65 57 52.5 4 1650 27.5 2.2 DCP4L061109J_ _ _ _ _ _<br>115 „ 45 65 57 52.5 4 1725 28 2.1 DCP4L061159J_ _ _ _ _ _<br>900 VDC (70° C) / 760 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms (10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>**----- End of picture text -----**<br> |<br>80 „<br>85 „<br>90 „<br>95„<br>100mF<br>110 „|45<br>45<br>45<br>45<br>45<br>45|55<br>65<br>65<br>65<br>65<br>65|57<br>57<br>57<br>57<br>57<br>57|52.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5||4<br>4<br>4<br>4<br>4<br>4|1200<br>1275<br>1350<br>1425<br>1500<br>1650|24.5<br>25<br>25.5<br>26<br>26.5<br>27.5||3<br>2.6<br>2.5<br>2.4<br>2.3<br>2.2|DCP4L058009H_ _ _ _ _ _<br>DCP4L058509J_ _ _ _ _ _<br>DCP4L059009J_ _ _ _ _ _<br>DCP4L059509J_ _ _ _ _ _<br>DCP4L061009J_ _ _ _ _ _<br>DCP4L061109J_ _ _ _ _ _| |---|---|---|---|---|---|---|---|---|---|---|---| |<br>115„|45|65|57|52.5||4|1725|28||2.1|DCP4L061159J_ _ _ _ _ _| ||||||||||||| ||||||||900 VDC (70°|C) / 760 VDC (85° C)|||| |Capacitance|W|H|L|PCM**||Pin|IS<br>A|Irms(10 kHz)*<br>A||ESR (10 kHz)*<br>m¸|Part number| |2mF<br>5 „<br>7„|11<br>17<br>17|21<br>29<br>34.5|31.5<br>31.5<br>31.5|27.5<br>27.5<br>27.5||2/4<br>2/4<br>2/4|70<br>175<br>245|2.5<br>4.5<br>6||44<br>18<br>13|DCP4N042006B_ _ _ _ _ _<br>DCP4N045006G_ _ _ _ _ _<br>DCP4N047006I_ _ _ _ _ _| |10mF<br>15 „<br>20 „<br>25 „<br>30 „<br>35 „<br>40 „<br>45 „<br>50 „<br>55 „<br>60 „<br>65 „<br>70 „<br>75 „<br>80„|20<br>20<br>20<br>24<br>31<br>31<br>35<br>40<br>35<br>35<br>35<br>35<br>45<br>45<br>45<br>45<br>45<br>45|39.5<br>39.5<br>39.5<br>45.5<br>46<br>46<br>50<br>55<br>50<br>50<br>50<br>50<br>55<br>55<br>55<br>65<br>65<br>65|31.5<br>41.5<br>41.5<br>41.5<br>41.5<br>41.5<br>41.5<br>41.5<br>57<br>57<br>57<br>57<br>57<br>57<br>57<br>57<br>57<br>57|27.5<br>37.5<br>37.5<br>37.5<br>37.5<br>37.5<br>37.5<br>37.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5<br>52.5||2/4<br>2/4<br>2/4<br>2/4<br>2/4<br>2/4<br>2/4<br>2/4<br>4<br>4<br>4<br>4<br>4<br>4<br>4<br>4<br>4<br>4|350<br>220<br>330<br>440<br>550<br>660<br>770<br>880<br>720<br>810<br>900<br>990<br>990<br>1080<br>1170<br>1260<br>1350<br>1440|8<br>8.5<br>10.5<br>13<br>15.5<br>15.5<br>18<br>19.5<br>20.5<br>21<br>22<br>22.5<br>22.5<br>23<br>24<br>24.5<br>25<br>25.5||8.8<br>8.8<br>5.8<br>4.8<br>3.8<br>3.7<br>3.2<br>3.2<br>3.2<br>2.8<br>3.3<br>3.2<br>3.2<br>3<br>2.9<br>3.3<br>2.9<br>2.8|DCP4N051006J_ _ _ _ _ _<br>DCP4N051007G_ _ _ _ _ _<br>DCP4N051507G_ _ _ _ _ _<br>DCP4N052007H_ _ _ _ _ _<br>DCP4N052507I_ _ _ _ _ _<br>DCP4N053007I_ _ _ _ _ _<br>DCP4N053507J_ _ _ _ _ _<br>DCP4N054007K_ _ _ _ _ _<br>DCP4N054009F_ _ _ _ _ _<br>DCP4N054509F_ _ _ _ _ _<br>DCP4N055009F_ _ _ _ _ _<br>DCP4N055509F_ _ _ _ _ _<br>DCP4N055509H_ _ _ _ _ _<br>DCP4N056009H_ _ _ _ _ _<br>DCP4N056509H_ _ _ _ _ _<br>DCP4N057009J_ _ _ _ _ _<br>DCP4N057509J_ _ _ _ _ _<br>DCP4N058009J_ _ _ _ _ _| |* General guide|||||||||||| |** PCM = Printed circuit module = pin spacing|||||||||||| |Dims. in mm.|||||||||Rights reserved to amend||design data without prior notification.| Continuation page 127 126 D ## ~~WIMA DC-LINK MKP 4~~ ## Continuation ## General Data **==> picture [492 x 645] intentionally omitted <==** **----- Start of picture text -----**<br> 1100 VDC (70° C) / 920 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms (10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br> 2 mF 13 24 31.5 27.5 2/4 86 3 36 DCP4P042006D_ _ _ _ _ _<br> 3 „ 15 26 31.5 27.5 2/4 129 4 23 DCP4P043006F_ _ _ _ _ _<br> 5 „ 17 34.5 31.5 27.5 2/4 215 5.5 14 DCP4P045006I_ _ _ _ _ _<br> 7 „ 20 39.5 31.5 27.5 2/4 301 7.5 10 DCP4P047006J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4 203 7.5 10 DCP4P047007F_ _ _ _ _ _<br> 10 mF 20 39.5 41.5 37.5 2/4 290 9.5 7.2 DCP4P051007G_ _ _ _ _ _<br> 15 „ 31 46 41.5 37.5 2/4 435 13 5.4 DCP4P051507I_ _ _ _ _ _<br> 20 „ 31 46 41.5 37.5 2/4 580 14 5.2 DCP4P052007I_ _ _ _ _ _<br>35 50 41.5 37.5 2/4 580 15 4.7 DCP4P052007J_ _ _ _ _ _<br> 25 „ 40 55 41.5 37.5 2/4 725 16.5 4.6 DCP4P052507K_ _ _ _ _ _<br> 30 „ 35 50 57 52.5 4 630 17.5 4.4 DCP4P053009F_ _ _ _ _ _<br> 35 „ 35 50 57 52.5 4 735 18 4 DCP4P053509F_ _ _ _ _ _<br> 40 „ 45 55 57 52.5 4 840 19 4.5 DCP4P054009H_ _ _ _ _ _<br> 45 „ 45 55 57 52.5 4 945 20 4.1 DCP4P054509H_ _ _ _ _ _<br> 50 „ 45 65 57 52.5 4 1050 21 4.1 DCP4P055009J_ _ _ _ _ _<br> 55 „ 45 65 57 52.5 4 1150 22 3.8 DCP4P055509J_ _ _ _ _ _<br> 60 „ 45 65 57 52.5 4 1260 23 3.5 DCP4P056009J_ _ _ _ _ _<br>1300 VDC (70° C) / 1100 VDC (85° C)<br>Capacitance W H L PCM** Pin IS Irms (10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br> 2 mF 15 26 31.5 27.5 2/4 100 3 36 DCP4R242006F_ _ _ _ _ _<br> 5 „ 20 39.5 31.5 27.5 2/4 250 6 14 DCP4R245006J_ _ _ _ _ _<br>20 39.5 41.5 37.5 2/4 175 7 14 DCP4R245007G_ _ _ _ _ _<br> 7 „ 20 39.5 41.5 37.5 2/4 245 8 10 DCP4R247007G_ _ _ _ _ _<br> 10 mF 24 45.5 41.5 37.5 2/4 350 10.5 7,2 DCP4R251007H_ _ _ _ _ _<br> 15 „ 31 46 41.5 37.5 2/4 525 14 4.8 DCP4R251507I_ _ _ _ _ _<br> 20 „ 40 55 41.5 37.5 2/4 700 17.5 4 DCP4R252007K_ _ _ _ _ _<br>35 50 57 52.5 4 500 18 4 DCP4R252009F_ _ _ _ _ _<br> 25 „ 35 50 57 52.5 4 625 19 3.6 DCP4R252509F_ _ _ _ _ _<br> 30 „ 45 55 57 52.5 4 750 20 4 DCP4R253009H_ _ _ _ _ _<br> 35 „ 45 65 57 52.5 4 875 21 4.1 DCP4R253509J_ _ _ _ _ _<br> 40 „ 45 65 57 52.5 4 1000 22 3.7 DCP4R254009J_ _ _ _ _ _<br> * General guide 2-pin version<br> PCM d<br>** PCM = Printed circuit module = pin spacing<br> 27.5 0.8<br> 37.5 1<br> Part number completion: W PCM b d c<br>Dims. in mm. Version code: 2-pin = D2 11 27.5 5 0.8 0.4<br>4-pin = D4 pin 13 27.5 7.5 0.8 0.4<br> Tolerance: 20 % = M 15 27.5 7.5 0.8 0.4<br> 4-pin version10 % = K 17 27.5 10 0.8 0.4<br> 5 % = J 20 27.5 12.5 0.8 0.4<br> Packing: bulk = S 19 37.5 10 1 0.4<br> Pin length: 6-2 = SD 20 37.5 12.5 1 0.4<br> Taped version see page 149. 24 37.5 12.5 1 0.4<br> 31 37.5 20 1 0.4<br> 35 37.5 20 1 0.4<br> 40 37.5 20 1 0.4<br> 35 52.5 20 1.2 0.8<br>pin pin 45 52.5 20 1.2 0.8<br>c c<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br> 127 D ## Recommendation for Processing and Application of Through-Hole Capacitors ## ~~Soldering Process~~ Internal temperature of the capacitor must be kept as follows: Polyester: preheating: Tmax. T 125° C soldering: Tmax. T 135° C Polypropylene: preheating: Tmax. T 100° C soldering: Tmax. T 110° C Single wave soldering Soldering bath temperature: T P 260 ° C Dwell time: t P 5 sec Double wave soldering Soldering bath temperature: T P 260 ° C Dwell time: St P 5 sec Due to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. ## ~~WIMA Quality and Environmental Philosophy~~ ## ~~ISO 9001:2015 Certification~~ ISO 9001:2015 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2015 of our factories by the infaz (Institut für Auditierung und Zertifizierung) certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. ## ~~WIMA WPCS~~ The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application during production process: - ” incoming material inspection ## ~~WIMA Environmental Policy~~ All WIMA capacitors, irrespective of whether through-hole devices or SMD, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. – Lead – PBB/PBDE – PCB – Arsenic – CFC – Cadmium – Hydrocarbon chloride – Mercury – Chromium 6+ – etc. We merely use pure, recyclable materials for packing our components, such as: - ” carton - ” cardboard - ” adhesive tape made of paper - ” polystyrene ## ~~RoHS Compliance~~ According to the RoHS Directive 2011/65/EU as amended from time to time certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 2006. For the sake of the environment WIMA has refraind from using such substances since years already. **WIMA Kondensatoren sind bleifrei konform RoHS 2011/65/EU WIMA capacitors are lead free in accordance with RoHS 2011/65/EU** Tape for lead-free WIMA capacitors - ” metallization - ” film inspection - ” schoopage - ” pre-healing - ” pin attachment - ” cast resin preparation/ encapsulation - ” 100% final inspection - ” Testing as per customer requirements We almost completely refrain from using packing materials such as: - ” adhesive tapes made of plastic - ” metal clips ## ~~DIN EN ISO 14001:2004~~ WIMA’s environmental management has been established in accordance with the guidelines of DIN EN ISO 14001:2004 to optimize the production processes with regard to energy and resources. 15 Typical Dimensions for Taping Configuration **==> picture [92 x 52] intentionally omitted <==** **----- Start of picture text -----**<br> D<br>**----- End of picture text -----**<br> |D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |ypca mensons or<br>Taping Configuration|||||||||||||||||||||||| |W0<br>H1<br>H<br>Diagram 2: PCM 10/15 m||||||P2<br>|||||P||||W2<br>W1<br>W|t<br>Vh|||||||| ||||||||||||||||||||||||| ||||H1||||||||||||||||||||| |||||W0<br>H||P1|||||||||||||||||| ||||||||||||||||||||||||| ||||||||||||||||||||||||| ||||||||||||||D0||||||||||| ||||||||||||||||||||||||| |||||||P<br>P1<br>P0<br>F|||||||d||||||||||| ||||||||||||||||||||||||| ||||||||||||||||||||||||| ||||||||||||||||||||||||| ||||||||||||||||||||||||| ||||||||||||||||||||||||| ||||||||||||||||||||||||| ||||||||||d||||||||||||d||| ||||||F<br>m||||P<br>P||0<br>2||||||||||||| ||||||||||||||||||||||||| |Designation|Symbol|PCM 2.5 taping<br>PCM 5 taping||||||||||||Dimensions for Radial Taping<br>PCM 7.5 taping<br>PCM 10 taping*<br>PCM 15 taping*<br>PCM 22.5 taping<br>PCM 27.5 taping|||||||||| |Carrier tape width|W|18.0p0.5||||||18.0p0.5||||||18.0p0.5|||18.0p0.5||18.0p0.5|||18.0p0.5|18.0p0.5| |Hold-down tape width|W0|6.0for hot-sealing<br>adhesive tape||||||6.0for hot-sealing<br>adhesive tape||||||12.0for hot-sealing<br>adhesive tape|||12.0for hot-sealing<br>adhesive tape||12.0for hot-sealing<br>adhesive tape|||12.0for hot-sealing<br>adhesive tape|12.0for hot-sealing<br>adhesive tape| |Hole position|W1|9.0p0.5||||||9.0p0.5||||||9.0p0.5|||9.0p0.5||9.0p0.5|||9.0p0.5|9.0p0.5| |Hold-down tape position|W2|0.5 to 3.0 max.||||||0.5 to 3.0 max.||||||0.5 to 3.0 max.|||0.5 to 3.0 max.||0.5 to 3.0 max.|||0.5 to 3.0 max.|0.5 to 3.0 max.| |Feed hole diameter|D0|4.0p0.2||||||4.0p0.2||||||4.0p0.2|||4.0p0.2||4.0p0.2|||4.0p0.2|4.0p0.2| |Pitch of component|P|12.7p1.0||||||12.7p1.0||||||12.7p1.0|||25.4p1.0||25.4p1.0|||38.1p1.5|3*8.1p1.5or 50.8p1.5| |Feed hole pitch<br>|P0|cumulative pitch<br>12.7p0.3 error max.<br> 1.0 mm/20 pitch||||||cumulative pitch<br>12.7p0.3 error max.<br> <br> 1.0 mm/20 pitc||||||<br> cumulative pitc<br>12.7p0.3 error max.<br>h<br> 1.0 mm/20 pitc|||h<br> cumulative pitch<br>12.7p0.3 error max.<br>h<br> 1.0 mm/20 pitch||<br> cumulative pitch<br>12.7p0.3 error max.<br> <br> 1.0 mm/20 pitch|||cumulative pitch<br>12.7p0.3 error max.<br> 1.0 mm/20 pitch|cumulative pitch<br>12.7p0.3 error max.<br> 1.0 mm/20 pitch| |~~d hl~~|||||||||||||||||||||||| |~~Fee oe centre~~<br>to pin|P1|5.1p0.5||||||3.85p0.7||||||2.6p0.7|||7.7p0.7||5.2p0.7|||7.8p0.7|5.3p0.7| |Hole centre to<br>component centre|P2|6.35p1.3||||||6.35p1.3||||||6.35p1.3|||12.7p1.3||12.7p1.3|||19.05p1.3|19.05p1.3| |Feed hole centre to bottom<br>edge of the component|H|16.5p0.3||||||16.5p0.3||||||16.5p0.5|||16.5p0.5||16.5p0.5|||16.5p0.5|16.5p0.5| |||18.5p0.5||||||18.5p0.5||||||18.5p0.5|||18.5p0.5||18.5p0.5|||18.5p0.5|18.5p0.5| |Feed hole centre to top<br>edge of the component|H1|H+Hcomponent< H1<br>32.25 max.||||||H+Hcomponent< H1<br>32.25 max.||||||H+Hcomponent< H1<br>24.5 to 31.5|||H+Hcomponent< H1<br>25.0 to 31.5||H+Hcomponent< H1<br>26.0 to 37.0|||H+Hcomponent< H1<br>30.0 to 43.0|H+Hcomponent< H1<br>35.0 to 45.0| |Pin spacing at<br>upper edge of carrier tape|F|2.5p0.5||||||5.0<br>+0.8<br> –0.2||||||7.5p0.8|||10.0p0.8||15p0.8|||22.5p0.8|27.5p0.8| |Pin diameter|d|0.4p0.05||||||0.5p0.05||||||„0.5p0.05 or0.6–0.05<br>+0.06|||„0.5p0.05 or0.6–0.05<br>+0,06||0.8–0.05<br>+0,08|||0.8–0.05<br>+0,08|0.8–0.05<br>+0.08| |Component alignment|Dh|p2.0 max.||||||p2.0 max.||||||p3.0 max.|||p3.0 max.||p3.0 max.|||p3.0 max.|p3.0 max.| |Total tape thickness|t|0.6p0.2||||||0.6p0.2||||||0.6p0.2|||0.6p0.2||0.6p0.2|||0.6p0.2|0.6p0.2| |Package<br>(see also page 150)||ROLL/AMMO||||||||||||AMMO|||||||||| |||REEL P360 max.<br>B 52p2 depending on<br>P30p1<br>58p2 comp. dimension||||||||||||s<br>52p2<br>54p2 depending<br> REELP360 max.<br>B 58p2 orREEL<br>P500 max.<br>B 60p2 on PCM and<br>P30p1<br>66p2<br>P25p1<br>68p2 component dimensions|||||||||| |Unit||||||||||||||see details page 151.|||||||||| |Dims in mm.<br>„Diameter of pins see General Data.<br>Please clarify customer-specific deviations with the manufacturer.<br> *PCM 10 and PCM 15 can be crimped to PCM 7.5.<br>Position of components according to PCM 7.5 (sketch 1). P0= 12.7 or 15.0 is possible|||||||||||||||||||||||| Dims in mm. „ Diameter of pins see General Data. Please clarify customer-specific deviations with the manufacturer. * PCM 10 and PCM 15 can be crimped to PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P0 = 12.7 or 15.0 is possible 149 D ## Types of Tape Packaging of Capacitors for Automatic Radial Insertion **==> picture [83 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ˜ ROLL Packaging<br>**----- End of picture text -----**<br> **==> picture [421 x 208] intentionally omitted <==** **----- Start of picture text -----**<br> ˜ AMMO Packaging ˜ REEL Packaging<br>3<br>eg Se<br>eg SF = ———<br>: Rey<br>leg Qe eS<br>e eg SESE<br><Ss |o SIEmt SSE<br>30±1<br>25±1<br>50 max.<br>50 max. 70 max. B<br>340 max. 340 max.<br>490 max.<br>340 max. 370 max.<br>340 max.<br>360 max. 500 max.<br>**----- End of picture text -----**<br> ## ~~BAR CODE (Labelling)~~ Labelling of package units in plain text and with alphanumerical Bar Code BARCODE „Code 39” Scanner decoding of - „ WIMA supplier number - „ Customer‘s P/O number - „ Customer‘s part number - „ WIMA confirmation number - „ WIMA part number - „ Lot number - „ Date code - „ Quantity In addition part description of - article - capacitance value - rated voltage - dimensions - capacitance tolerance - packing as well as gross weight and customer‘s name are indicated in plain text. 150 D Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm **==> picture [489 x 616] intentionally omitted <==** **----- Start of picture text -----**<br> pcs. per packing unit<br>ROLL REEL AMMO<br>Size<br>PCM bulk P 360 P 500 340 [x] 340 490 [x] 370<br>H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5<br>W H L Codes S N O F I H J A C B D<br> 2.5 7 4.6 0B 5000 2200 2500 – 2800 –<br> 3 7.5 4.6 0C 5000 2000 2300 – 2300 –<br>2.5 mm 3.8 8.5 4.6 0D 5000 1500 1800 – 1800 –<br> 4.6 9 4.6 0E 5000 1200 1500 – 1500 –<br> 5.5 10 4.6 0F 5000 900 1200 – 1200 –<br> 2.5 6.5 7.2 1A 5000 2200 2500 – 2800 –<br> 3 7.5 7.2 1B 5000 2000 2300 – 2300 –<br> 3.5 8.5 7.2 1C 5000 1600 2000 – 2000 –<br> 4.5 6 7.2 1D 6000 1300 1500 – 1500 –<br> 4.5 9.5 7.2 1E 4000 1300 1500 – 1500 –<br> 5 10 7.2 1F 3500 1100 1400 – 1400 –<br>5 mm 5.5 5.5 711.5 7.2 7.2 1G1H 40002500 10001000 12001200 –– 12001200 ––<br> 6.5 8 7.2 1I 2500 800 1000 – 1000 –<br> 7.2 8.5 7.2 1J 2500 700 1000 – 1000 –<br> 7.2 13 7.2 1K 2000 700 950 – 1000 –<br> 8.5 10 7.2 1L 2000 600 800 – 800 –<br> 8.5 14 7.2 1M 1500 600 800 – 800 –<br>11 16 7.2 1N 1000 500 600 – 640 –<br> 2.5 7 10 2A 5000 – 2500 4400 2500 –<br> 3 8.5 10 2B 5000 – 2200 4300 2300 4150<br> 4 9 10 2C 4000 – 1700 3200 1700 3100<br>7.5 mm 4.5 9.5 10.3 2D 3500 – 1500 2900 1400 2700<br> 5 10.5 10.3 2E 3000 – 1300 2500 1300 –<br> 5.7 12.5 10.3 2F 2000 – 1000 2200 1100 –<br>7.2 12.5 10.3 2G 1500 – 900 1800 1000 –<br> 3 9 13 3A 3000 – 1100 2200 – 1900<br> 4 8.5 13.5 FA 3000 – 900 1600 – 1450<br> 4 9 13 3C 3000 – 900 1600 – 1450<br> 4 9.5 13 3D 3000 – 900 1600 – 1400<br>10 mm 5 10 13.5 FB 2000 – 700 1300 – 1200<br> 5 11 13 3F 3000 – 700 1300 – 1200<br> 6 12 13 3G 2400 – 550 1100 – 1000<br> 6 12.5 13 3H 2400 – 550 1100 – 1000<br>8 12 13 3I 2000 – 400 800 – 740<br> 5 11 18 4B 2400 – 600 1200 – 1150<br> 5 13 19 FC 1000 – 600 1200 – 1200<br> 6 12.5 18 4C 2000 – 500 1000 – 1000<br> 6 14 19 FD 1000 – 500 1000 – 1000<br> 7 14 18 4D 1600 – 450 900 – 850<br> 7 15 19 FE 1000 – 450 900 – 850<br>15 mm 8 15 18 4F 1200 – 400 800 – 740<br> 8 17 19 FF 500 – 400 800 – 740<br> 9 14 18 4H 1200 – 350 700 – 650<br> 9 16 18 4J 900 – 350 700 – 650<br>10 18 19 FG 500 – 300 650 – 590<br>11 14 18 4M 1000 – 300 600 – 540<br> 5 14 26.5 5A 1200 – – 800 – 770<br> 6 15 26.5 5B 1000 – – 700 – 640<br> 7 16.5 26.5 5D 760 – – 600 – 550<br> 8 20 28 FH 500 – – 500 – 480<br>22.5 mm 8.510 18.522 26.528 5FFI 500570* –– –– 480 420 –– 450 380<br>10.5 19 26.5 5G 594* – – 400 – 360<br>10.5 20.5 26.5 5H 594* – – 400 – 360<br>11 21 26.5 5I 561* – – 380 – 350<br>12 24 28 FJ 480* – – 350 – 310<br>* TPS (Tray-Packing-System). Plate versions may have different packing units. Moulded versions. Rights reserved to amend design data without prior notification.<br> Samples and pre-production needs on request.<br>**----- End of picture text -----**<br> 151 D Packing Quantities for Capacitors with Radial Pins in PCM 27.5 mm to 52.5 mm **==> picture [490 x 357] intentionally omitted <==** **----- Start of picture text -----**<br> pcs. per packing unit<br>ROLL REEL AMMO<br>Size<br>PCM bulk P 360 P 500 340 [x] 340 490 [x] 370<br>H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5<br>W H L Codes S N O F I H J A C B D<br> 9 19 31.5 6A 567* – – 460/340* – 420<br>11 21 31.5 6B 459* – – 380/280* – 350<br>13 24 31.5 6D 378* – – 300 – 290<br>13 25 33 FK 405* – – – – –<br>27.5 mm 1515 2626 31.533 6FFL 324324** –– –– 270– –– 250–<br>17 29 31.5 6G 198* – – – – –<br>17 34.5 31.5 6I 198* – – – – –<br>20 32 33 FM 162* – – – – –<br>20 39.5 31.5 6J 162* – – – – –<br> 9 19 41.5 7A 441* – – – – –<br>11 22 41.5 7B 357* – – – – –<br>13 24 41.5 7C 294* – – – – –<br>15 26 41.5 7D 252* – – – – –<br>17 29 41.5 7E 154* – – – – –<br>37.5 mm 19 32 41.5 7F 140* – – – – –<br>20 39.5 41.5 7G 126* – – – – –<br>24 45.5 41.5 7H 112* – – – – –<br>31 46 41.5 7I 84* – – – – –<br>35 50 41.5 7J 35* – – – – –<br>40 55 41.5 7K 28* – – – – –<br>19 31 56 8D 120* – – – – –<br>23 34 56 8E 80* – – – – –<br>48.5 mm 27 37.5 56 8H 84* – – – – –<br>33 48 56 8J 25* – – – – –<br>37 54 56 8L 25* – – – – –<br>25 45 57 9D 70* – – – – –<br>30 45 57 9E 60*<br>52.5 mm 35 50 57 9F 25*<br>45 55 57 9H 20* – – – – –<br>45 65 57 9J 20* – – – – –<br>**----- End of picture text -----**<br> * for 2-inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. Updated data on www.wima.com 152 D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: **==> picture [489 x 138] intentionally omitted <==** **----- Start of picture text -----**<br> Field 1 - 4: Type description<br>Field 5 - 6: Rated voltage<br>Field 7 - 10: Capacitance<br>Field 11 - 12: Size and PCM<br>Field 13 - 14: Version code (e.g. Snubber versions)<br>Field 15: Capacitance tolerance<br>Field 16: Packing<br>Field 17 - 18: Pin length (untaped)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br>M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D<br>**----- End of picture text -----**<br> |MKS 2|MKS 2|MKS 2|63 VDC|63 VDC|63 VDC||0.01mF|0.01mF|0.01mF|2.5 x 6.5 x 7.2||-|-||20 %<br>bulk|||6|-2| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| ||||||||||||||||||||| |Type description:|||Rated voltage:||||Capacitance:|||Size:|||||Tolerance:||||| |SMD-PET||= SMDT|50 VDC||= B0||22 pF|= 0022||4.8 x 3.3 x 3 Size 1812||= KA|||±20 %<br>= M||||| |SMD-PEN||= SMDN|63 VDC||= C0||47 pF|= 0047||4.8 x 3.3 x 4 Size 1812||= KB|||±10 %<br>= K||||| |SMD-PPS||= SMDI|100 VDC||= D0||100 pF|= 0100||5.7 x 5.1 x 3.5 Size 2220||= QA|||±5 %<br>= J||||| |FKP 02||= FKP0|250 VDC||= F0||150 pF|= 0150||5.7 x 5.1 x 4.5 Size 2220||= QB|||±2.5 %<br>= H||||| |MKS 02||= MKS0|400 VDC||= G0||220 pF|= 0220||7.2 x 6.1 x 3 Size 2824||= TA|||±1 %<br>= E||||| |FKS 2||= FKS2|450 VDC||= H0||330 pF|= 0330||7.2 x 6.1 x 5 Size 2824||= TB|||...||||| |FKP 2||= FKP2|520 VDC||= H2||470 pF|= 0470||10.2 x 7.6 x 5 Size 4030||= VA|||||||| |FKS 3<br>FKP 3||= FKS3<br>= FKP 3|600 VDC<br>630 VDC||= I0<br>= J0||680 pF<br>1000 pF|= 0680<br> = 1100||12.7 x 10.2 x 6 Size 5040 <br>15.3 x 13.7 x 7 Size 6054||= XA<br> = YA|||Packing:||||| |MKS 2||= MKS2|700 VDC||= K0||1500 pF|= 1150||2.5 x 7 x 4.6 PCM 2.5||= 0B|||AMMO H16.5 340 x 340 = A||||| |MKP 2||= MKP2|800 VDC||= L0||2200 pF|= 1220||3 x 7.5 x 4.6 PCM 2.5||= 0C|||AMMO H16.5 490 x 370 = B||||| |MKS 4||= MKS4|850 VDC||= M0||3300 pF|= 1330||2.5 x 6.5 x 7.2 PCM 5||= 1A|||AMMO H18.5 340 x 340 = C||||| |MKP 4C||= MKPC|900 VDC||= N0||4700 pF|= 1470||3 x 7.5 x 7.2 PCM 5||= 1B|||AMMO H18.5 490 x 370 = D||||| |MKP 4||= MKP4|1000 VDC||= O1||6800 pF|= 1680||2.5 x 7 x 10 PCM 7.5||= 2A|||REEL H16.5 360||||= F| |MKP 10||= MKP1|1100 VDC||= P0||0.01mF|= 2100||3 x 8.5 x 10 PCM 7.5||= 2B|||REEL H16.5 500||||= H| |FKP 1||= FKP1|1200 VDC||= Q0||0.022mF|= 2220||3 x 9 x 13 PCM 10||= 3A|||REEL H18.5 360||||= I| |MKP-X2||= MKX2|1250 VDC||= R0||0.047mF|= 2470||4 x 9 x 13 PCM 10||= 3C|||REEL H18.5 500||||= J| |MKP-X1 R||= MKX1|1500 VDC||= S0||0.1mF|= 3100||5 x 11 x 18 PCM 15||= 4B|||ROLL H16.5||||= N| |MKP-Y2||= MKY2|1600 VDC||= T0||0.22mF|= 3220||6 x 12.5 x 18 PCM 15||= 4C|||ROLL H18.5||||= O| |MP 3-X2||= MPX2|2000 VDC||= U0||0.47mF|= 3470||5 x 14 x 26.5 PCM 22.5||= 5A|||BLISTER W12 180||||= P| |MP 3-X1||= MPX1|2500 VDC||= V0||1mF|= 4100||6 x 15 x 26.5 PCM 22.5||= 5B|||BLISTER W12 330||||= Q| |MP 3-Y2||= MPY2|3000 VDC||= W0||2.2mF|= 4220||9 x 19 x 31.5 PCM 27.5||= 6A|||BLISTER W16 330||||= R| |MP 3R-Y2||= MPRY|4000 VDC||= X0||4.7mF|= 4470||11 x21 x 31.5 PCM 27.5||= 6B|||BLISTER W24 330||||= T| |MKP 4F||= MKPF|6000 VDC||= Y0||10mF|= 5100||9 x 19 x 41.5 PCM 37.5||= 7A|||Bulk/TPS Standard||||= S| |Snubber MKP||= SNMP|250 VAC||= 0W||22mF|= 5220||11 x 22 x 41.5 PCM 37.5||= 7B|||...||||| |Snubber FKP||= SNFP|275 VAC||= 1W||47mF|= 5470||19 x 31 x 56 PCM 48.5||= 8D|||||||| |GTO MKP||= GTOM|300 VAC||= 2W||100mF|= 6100||25 x 45 x 57 PCM 52.5||= 9D|||||||| |DC-LINK MKP|3|= DCP3|305 VAC||= AW||220mF|= 6220||...|||||||||| |DC-LINK MKP|4|= DCP4|350 VAC||= BW||1000mF|= 7100|||||||||||| |DC-LINK MKP 4S <br>DC-LINK MKP 5||= DCPS<br> = DCP5|440 VAC<br>500 VAC||= 4W<br>= 5W||1500mF <br>...|= 7150||Version code:|||||Pin length (untaped)||||| |DC-LINK MKP|6|= DCP6|...|||||||Standard<br>= 00|||||3.5 ±0.5 = C9||||| |DC-LINK HC||= DCHC||||||||Version A1<br>= 1A|||||6 -2<br>= SD||||| |DC-LINK HY||= DCHY||||||||Version A1.1.1 = 1B|||||16 ±1<br>= P1||||| |||||||||||Version A2<br>= 2A|||||...||||| |||||||||||...|||||Pin length (taped)||||| ||||||||||||||||none<br>= 00||||| The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 147
Updated at April 28, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →