DCP4G054006JD2KSSD

Power Film Capacitor, Metallized PP, Radial Box - 2 Pin, 40 µF, ± 10%, DC Link, Through Hole

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: WIMA
Product type: Power Film Capacitors
Available until stocks are exhausted
ESR: 6000µohm
SVHC: No SVHC (27-Jun-2018)
Height: 39.5mm
Capacitance: 40µF
Voltage(AC): -
Voltage(DC): 400V
Lead Spacing: 27.5mm
Peak Current: -
dv/dt Rating: 11V/µs
Output (kvar): -
Product Range: DCP4 Series
Product Width: 20mm
Qualification: AEC-Q200
Product Height: 39.5mm
Product Length: 31.5mm
Ripple Current: -
Dielectric Type: Metallized PP
Humidity Rating: -
Product Diameter: -
Capacitor Mounting: Through Hole
RMS Current (Irms): -
Capacitor Terminals: PC Pin
Typical Applications: DC Link
Capacitance Tolerance: ± 10%
Capacitor Case / Package: Radial Box - 2 Pin
Operating Temperature Max: 105°C
Operating Temperature Min: -55°C
Delivery and price
Units per pack	324
Price	5.75 €
Current stock	500+
Lead time	30 days
Datasheet
D <> 

## ~~WIMA DC-LINK MKP 4~~ 

Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 m _ F to 400 mF. Rated Voltages from 400 VDC to 1500 VDC. 

## Special Features 

## Electrical Data 

## Test voltage: 

Capacitance range: 1 mF to 400 mF 

- ˜ Capacitances up to 400 mF 

 500 VDC: 1.5 Ur, 2sec 

(intermediate values on request) 

- ˜ High volume/capacitance ratio 

   - 500 VDC: 1.2 Ur, 2sec  r, 2sec  , 2sec 

- ˜ Excellent self-healing properties   Excellent self-healing properties 

˜ Excellent self-healing properties   Excellent self-healing properties Rated voltages: 400 VDC, 500 VDC, 600 VDC,  500 VDC: 1.2 Ur, 2sec  r, 2sec  , 2sec ˜ Very low dissipation factor 800 VDC, 900 VDC, 1100 VDC, 1300 VDC, 1500 VDC Specific dissipation: ˜ High reliability Capacitance tolerances: ±20%, ±10%, ±5% Box size Specific dissipation in Watts per K ˜ 2-pin, 4-pin or plate contact  configuration Operating temperature range:–55+ C to +105+ C (hot spot including W x H x L in mm above the ambient temperature ˜ AEC-Q200 qualified self-heating) 9 x 19 x 31.5 0.021 ˜ According to RoHS 2011/65/EU Climatic test category: 55/085/56 11 x 21 x 31.5 0.025 13 x 24 x 31.5 0.030 in accordance with IEC 15 x 26 x 31.5 0.034 ~~Typical Applications~~ Insulation resistance at +20+ C: 17 x 29 x 31.5 0.039  30 000 sec (M¸ x mF) 17 x 34.5 x 31.5 0.044 As intermediate circuit capacitor e.g. Measuring voltage: 100 V/1 min. 20 x 39.5 x 31.5 0.053 in high power converter technology, Dielectric absorption: 0.05 % 13 x 24 x 41.5 0.037 power supplies, solar inverters, Voltage and current derating: 15 x 26 x 41.5 0.042 e-mobility (battery chargers, motor A derating factor of 1.35% per K must be 17 x 29 x 41.5 0.048 drives & power train) etc. applied from +85° C for DC voltages and 19 x 32 x 41.5 0.054 from +70° C for AC currents (Irms). Addition20 x 39.5 x 41.5 0.065 ~~Construction~~ ally a derating factor of 4.5% per K must be 24 x 45.5 x 41.5 0.080 applied from +85° C for AC currents (Irms) 28 x 38 x 41.5 0.076 Reliability: Operational life 100 000 hours 31 x 46 x 41.5 0.092 Dielectric:Polypropylene (PP) filmCapacitor electrodes: Failure rate (Ur and 70) C) l0 (0.5 x Ur and 40) C) 35 x 50 x 41.5  40 x 55 x 41.5  25 x 45 x 57 0.106 0.123 0.102 Vacuum-deposited P =  CN [mF] x Ur [V]  l0 30 x 45 x 57 0.113 Internal construction: P  10 000 <  2 fit 35 x 50 x 57 0.132 10 000 < P  25 000 <  5 fit 45 x 55 x 57 0.164 25 000 < P  50 000 < 10 fit 45 x 65 x 57 0.184 Plastic film 50 000 < P 100 000 < 20 fit Vacuum-deposited For further details and graphs please electrode P > 100 000 < 30 fit refer to Technical Information. Metal contact layer (schoopage) Dissipation factors at +20° C: tan d x 10[-4] Termination 400 VDC 500 VDC 600 VDC 800 VDC 900 VDC 1100 VDC 1300 VDC 1500 VDC PCM 1 kHz 10 kHz 1 kHz 10 kHz 1 kHz 10 kHz 1 kHz 10 kHz 1 kHz 10 kHz 1 kHz 10 kHz 1 kHz 10 kHz 1 kHz 10 kHz 27.5 15 160 15 130 12 120 10 90 10 80 10 60 7 50 7 40 ~~=~~ 37.5 60 350 30 240 21 150 18 170 16 150 14 100 12 90 12 90 Encapsulation: ~~Ra~~ 52.5 80 550 80 460 40 300 35 250 31 200 30 170 23 150 23 150 Solvent-resistant, flame-retardant plastic Maximum pulse rise time: case with epoxy resin seal, UL 94 V-0 Terminations: PCM max. pulse rise time V/msec at TA < 40) C Tinned wire or plates. 400 VDC 500 VDC 600 VDC 800 VDC 900 VDC 1100 VDC 1300 VDC 1500 VDC Marking: 27.5 11 15 27 29 35 43 50 59 Colour: Red. Marking: Black. 37.5 8 10 19 21 22 29 35 41 ~~EEE~~ 52.5 5 7 13 15 18 21 25 29 

## ~~Packing~~ 

Packing units at the end of the catalogue 

133 

D 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

## General Data 

**==> picture [490 x 597] intentionally omitted <==**

**----- Start of picture text -----**<br>
400 VDC (70° C) / 300 VDC (85° C) / 220 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF  9 19 31.5 27.5 2   11  1 238.7 DCP4G041006A_ _ _ _ _ _<br>  2 „  9 19 31.5 27.5 2   22  1.5 119.4 DCP4G042006A_ _ _ _ _ _<br>  3 „  9 19 31.5 27.5 2   33  1.5  79.6 DCP4G043006A_ _ _ _ _ _<br>  4 „  9 19 31.5 27.5 2   44  2  59.7 DCP4G044006A_ _ _ _ _ _<br>  5 „  9 19 31.5 27.5 2   55  2  47.7 DCP4G045006A_ _ _ _ _ _<br>  7 „  9 19 31.5 27.5 2   77  2.5  34.1 DCP4G047006A_ _ _ _ _ _<br> 10 mF 11 21 31.5 27.5 2/4  110  3.5  23.9 DCP4G051006B_ _ _ _ _ _<br> 15 „ 13 24 31.5 27.5 2/4  165  4.5  15.9 DCP4G051506D_ _ _ _ _ _<br> 20 „ 15 26 31.5 27.5 2/4  220  5.5  11.9 DCP4G052006F_ _ _ _ _ _<br> 22 „ 17 29 31.5 27.5 2/4  242  6   9.8 DCP4G052206G_ _ _ _ _ _<br> 25 „ 17 29 31.5 27.5 2/4  275  7   8.6 DCP4G052506G_ _ _ _ _ _<br>15 26 41.5 37.5 2/4  200  6.5  10 DCP4G052507D_ _ _ _ _ _<br> 30 „ 17 34.5 31.5 27.5 2/4  330  8   7.2 DCP4G053006I_ _ _ _ _ _<br>17 29 41.5 37.5 2/4  240  7.5   8.5 DCP4G053007E_ _ _ _ _ _<br> 40 „ 20 39.5 31.5 27.5 2/4  440 10   5.4 DCP4G054006J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4  320  9.5   6 DCP4G054007F_ _ _ _ _ _<br> 50 „ 20 39.5 41.5 37.5 2/4  400 11   5.4 DCP4G055007G_ _ _ _ _ _<br> 60 „ 20 39.5 41.5 37.5 2/4  480 11.5   4.8 DCP4G056007G_ _ _ _ _ _<br> 70 „ 24 45.5 41.5 37.5 2/4  560 13   4.7 DCP4G057007H_ _ _ _ _ _<br> 80 „ 24 45.5 41.5 37.5 2/4  640 14   4.1 DCP4G058007H_ _ _ _ _ _<br> 90 „ 24 45.5 41.5 37.5 2/4  720 15   3.6 DCP4G059007H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4  720 15   3.6 DCP4G059007L_ _ _ _ _ _<br>100 mF 31 46 41.5 37.5 2/4  800 18   2.8 DCP4G061007I_ _ _ _ _ _<br>120 „ 31 46 41.5 37.5 2/4  960 20   2.3 DCP4G061207I_ _ _ _ _ _<br>140 „ 35 50 41.5 37.5 2/4 1120 22.5   2.1 DCP4G061407J_ _ _ _ _ _<br>150 „ 35 50 41.5 37.5 2/4 1200 23   2 DCP4G061507J_ _ _ _ _ _<br>25 45 57 52.5 4  750 20   2.6 DCP4G061509D_ _ _ _ _ _<br>160 „ 40 55 41.5 37.5 2/4 1280 24.5   2 DCP4G061607K_ _ _ _ _ _<br>25 45 57 52.5 4  800 21   2.3 DCP4G061609D_ _ _ _ _ _<br>180 „ 40 55 41.5 37.5 2/4 1440 26   1.8 DCP4G061807K_ _ _ _ _ _<br>30 45 57 52.5 4  900 23.5   2 DCP4G061809E_ _ _ _ _ _<br>200 „ 40 55 41.5 37.5 2/4 1600 27.5   1.6 DCP4G062007K_ _ _ _ _ _<br>30 45 57 52.5 4 1000 25   1.8 DCP4G062009E_ _ _ _ _ _<br>220 „ 35 50 57 52.5 4 1100 27   1.8 DCP4G062209F_ _ _ _ _ _<br>250 „ 45 55 57 52.5 4 1250 32   1.6 DCP4G062509H_ _ _ _ _ _<br>270 „ 45 55 57 52.5 4 1350 33.5   1.5 DCP4G062709H_ _ _ _ _ _<br>300 „ 45 55 57 52.5 4 1500 35   1.3 DCP4G063009H_ _ _ _ _ _<br>330 „ 45 65 57 52.5 4 1650 37   1.2 DCP4G063309J_ _ _ _ _ _<br>350 „ 45 65 57 52.5 4 1750 40   1.1 DCP4G063509J_ _ _ _ _ _<br>370 „ 45 65 57 52.5 4 1850 41.5   1.1 DCP4G063709J_ _ _ _ _ _<br>400 „ 45 65 57 52.5 4 2000 43   1 DCP4G064009J_ _ _ _ _ _<br> * General guide<br>New values and box sizes. The box sizes according to main catalogue 2019  Part number completion:<br>         are still available on request.<br> Version code:  2-pin  = D2<br>* Permissible Irms at 10° C internal temperature rise (general guide)  Tolerance:  20 %  = M 4-pin  = D4<br>** PCM = Printed circuit module = pin spacing 10 %  = K<br> 5 %  = J<br>Dims. in mm.  Packing:  bulk  = S<br> Pin length:  6-2  = SD<br> Taped version see page 161.<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br>


Continuation page 135 

134 

D 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

## General Data 

**==> picture [489 x 596] intentionally omitted <==**

**----- Start of picture text -----**<br>
500 VDC (70° C) / 400 VDC (85° C) / 290 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF  9 19 31.5 27.5 2  15  1 238.7 DCP4H141006A_ _ _ _ _ _<br>  2 „  9 19 31.5 27.5 2  30  1.5 119.4 DCP4H142006A_ _ _ _ _ _<br>  3 „  9 19 31.5 27.5 2  45  1.5  79.6 DCP4H143006A_ _ _ _ _ _<br>  4 „  9 19 31.5 27.5 2  60  1.8  63.7 DCP4H144006A_ _ _ _ _ _<br>  5 „  9 19 31.5 27.5 2  75  2.5  47.7 DCP4H145006A_ _ _ _ _ _<br>  7 „ 11 21 31.5 27.5 2/4 105  3  34.1 DCP4H147006B_ _ _ _ _ _<br>  8 „ 13 24 31.5 27.5 2/4 120  3  29.8 DCP4H148006D_ _ _ _ _ _<br> 10 mF 13 24 31.5 27.5 2/4 150  4  23.9 DCP4H151006D_ _ _ _ _ _<br> 12 „ 15 26 31.5 27.5 2/4 180  4  19.9 DCP4H151206F_ _ _ _ _ _<br> 15 „ 17 29 31.5 27.5 2/4 225  5  15.9 DCP4H151506G_ _ _ _ _ _<br>15 26 41.5 37.5 2/4 150  4.3  22.3 DCP4H151507D_ _ _ _ _ _<br> 18 „ 17 29 31.5 27.5 2/4 270  6   9.5 DCP4H151806G_ _ _ _ _ _<br> 20 „ 17 34.5 31.5 27.5 2/4 300  6  11.9 DCP4H152006I_ _ _ _ _ _<br>17 29 41.5 37.5 2/4 200  5.4  16.8 DCP4H152007E_ _ _ _ _ _<br> 22 „ 20 39.5 31.5 27.5 2/4 330  7  10.9 DCP4H152206J_ _ _ _ _ _<br> 25 „ 20 39.5 31.5 27.5 2/4 375  7.5   9.5 DCP4H152506J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4 250  6.3  13.4 DCP4H152507F_ _ _ _ _ _<br> 30 „ 20 39.5 41.5 37.5 2/4 300  9   7.9 DCP4H153007G_ _ _ _ _ _<br> 35 „ 20 39.5 41.5 37.5 2/4 350  8.5   9.1 DCP4H153507G_ _ _ _ _ _<br> 40 „ 20 39.5 41.5 37.5 2/4 400 10   5.7 DCP4H154007G_ _ _ _ _ _<br> 50 „ 24 45.5 41.5 37.5 2/4 500 13   4.8 DCP4H155007H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4 500 13   4.8 DCP4H155007L_ _ _ _ _ _<br> 55 „ 24 45.5 41.5 37.5 2/4 550 14   4 DCP4H155507H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4 550 14   4 DCP4H155507L_ _ _ _ _ _<br> 60 „ 31 46 41.5 37.5 2/4 600 14   4.7 DCP4H156007I_ _ _ _ _ _<br> 70 „ 31 46 41.5 37.5 2/4 700 16.5   3.9 DCP4H157007I_ _ _ _ _ _<br> 80 „ 31 46 41.5 37.5 2/4 800 17.5   3.4 DCP4H158007I_ _ _ _ _ _<br> 90 „ 35 50 41.5 37.5 2/4 900 19   3 DCP4H159007J_ _ _ _ _ _<br>100 mF 35 50 41.5 37.5 2/4 1000 20   2.7 DCP4H161007J_ _ _ _ _ _<br>25 45 57 52.5 4  700 14.3   5 DCP4H161009D_ _ _ _ _ _<br>120 „ 40 55 41.5 37.5 2/4 1200 22.5   2.7 DCP4H161207K_ _ _ _ _ _<br>30 45 57 52.5 4  840 16.5   4.2 DCP4H161209E_ _ _ _ _ _<br>130 „ 40 55 41.5 37.5 2/4 1300 23   2.4 DCP4H161307K_ _ _ _ _ _<br>140 „ 35 50 57 52.5 4  980 21.5   2.8 DCP4H161409F_ _ _ _ _ _<br>150 „ 35 50 57 52.5 4 1050 22.5   2.7 DCP4H161509F_ _ _ _ _ _<br>160 „ 45 55 57 52.5 4 1120 25.5   2.5 DCP4H161609H_ _ _ _ _ _<br>180 „ 45 55 57 52.5 4 1260 27   2.2 DCP4H161809H_ _ _ _ _ _<br>200 „ 45 55 57 52.5 4 1400 28.5   2 DCP4H162009H_ _ _ _ _ _<br>210 „ 45 55 57 52.5 4 1470 29.5   1.9 DCP4H162109H_ _ _ _ _ _<br>220 „ 45 65 57 52.5 4 1540 32   1.8 DCP4H162209J_ _ _ _ _ _<br>240 „ 45 65 57 52.5 4 1680 33.5   1.7 DCP4H162409J_ _ _ _ _ _<br> * General guide<br> New values and box sizes. The box sizes according to main catalogue 2019  Part number completion:<br>         are still available on request.  Version code:  2-pin  = D2<br>* Permissible Irms at 10° C internal temperature rise (general guide)   Tolerance:  20 %  = M 4-pin  = D4<br>** PCM = Printed circuit module = pin spacing 10 %  = K<br> 5 %  = J<br>Dims. in mm.  Packing:  bulk  = S<br> Pin length:  6-2  = SD<br> Taped version see page 161.<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br>


Continuation page 136 

135 

D 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

## General Data 

**==> picture [490 x 639] intentionally omitted <==**

**----- Start of picture text -----**<br>
600 VDC (70° C) / 450 VDC (85° C) / 320 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF  9 19 31.5 27.5 2   27  1.5 106.9 DCP4I041006A_ _ _ _ _ _<br>  2 „  9 19 31.5 27.5 2   54  2 56 DCP4I042006A_ _ _ _ _ _<br>  3 „  9 19 31.5 27.5 2   81  2.5 35.6 DCP4I043006A_ _ _ _ _ _<br>  4 „ 11 21 31.5 27.5 2/4  108  3 26.7 DCP4I044006B_ _ _ _ _ _<br>  5 „ 13 24 31.5 27.5 2/4  135  3.5 22 DCP4I045006D_ _ _ _ _ _<br>  7 „ 15 26 31.5 27.5 2/4  189  4.5 16 DCP4I047006F_ _ _ _ _ _<br>  8 „ 15 26 31.5 27.5 2/4  216  5 13.4 DCP4I048006F_ _ _ _ _ _<br> 10 mF 17 29 31.5 27.5 2/4  270  6 11 DCP4I051006G_ _ _ _ _ _<br>13 24 41.5 37.5 2/4  190  5 17.6 DCP4I051007C_ _ _ _ _ _<br> 12 „ 17 29 31.5 27.5 2/4  324  6.5  8.9 DCP4I051206G_ _ _ _ _ _<br> 15 „ 17 34.5 31.5 27.5 2/4  405  8  7 DCP4I051506I_ _ _ _ _ _<br>17 29 41.5 37.5 2/4  285  6.5 11.8 DCP4I051507E_ _ _ _ _ _<br> 18 „ 20 39.5 31.5 27.5 2/2  486  9.5  5.9 DCP4I051806J_ _ _ _ _ _<br> 20 „ 20 39.5 31.5 27.5 2/4  540 10  5.3 DCP4I052006J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4  380 10.5  4.9 DCP4I052007F_ _ _ _ _ _<br> 22 „ 20 39.5 41.5 37.5 2/4  418 11  5.4 DCP4I052207G_ _ _ _ _ _<br> 25 „ 20 39.5 41.5 37.5 2/4  475 11.5  5 DCP4I052507G_ _ _ _ _ _<br> 30 „ 24 45.5 41.5 37.5 2/4  570 14  4.1 DCP4I053007H_ _ _ _ _ _<br> 35 „ 24 45.5 41.5 37.5 2/4  665 14.5  3.8 DCP4I053507H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4  665 14.5  3.8 DCP4I053507L_ _ _ _ _ _<br> 40 „ 31 46 41.5 37.5 2/4  760 16.5  3.3 DCP4I054007I_ _ _ _ _ _<br> 45 „ 31 46 41.5 37.5 2/4  855 17  3.2 DCP4I054507I_ _ _ _ _ _<br> 50 „ 35 50 41.5 37.5 2/4  950 19  2.9 DCP4I055007J_ _ _ _ _ _<br> 60 „ 35 50 41.5 37.5 2/4 1140 17.5  3.4 DCP4I056007J_ _ _ _ _ _<br>25 45 57 52.5 2/4  780 14.5  4.9 DCP4I056009D_ _ _ _ _ _<br> 70 „ 40 55 41.5 37.5 2/4 1330 20  3.1 DCP4I057007K_ _ _ _ _ _<br>30 45 57 52.5 4  910 16.5  4.2 DCP4I057009E_ _ _ _ _ _<br> 80 „ 40 55 41.5 37.5 2/4 1520 22  2.6 DCP4I058007K_ _ _ _ _ _<br>30 45 57 52.5 4 1040 17.8  3.6 DCP4I058009E_ _ _ _ _ _<br> 90 „ 35 50 57 52.5 4 1170 23.5  1.9 DCP4I059009F_ _ _ _ _ _<br>100 mF 45 55 57 52.5 4 1300 25  2.6 DCP4I061009H_ _ _ _ _ _<br>120 „ 45 65 57 52.5 4 1560 28  2.3 DCP4I061209J_ _ _ _ _ _<br>140 „ 45 65 57 52.5 4 1820 31  1.9 DCP4I061409J_ _ _ _ _ _<br>150 „ 45 65 57 52.5 4 1950 33  1.7 DCP4I061509J_ _ _ _ _ _<br> * General guide                                                                       [2-pin version]<br> PCM d<br> New values and box sizes. The box sizes according<br>         to main catalogue 2019 are still available on request.  27.5 0.8<br> 37.5 1<br>* Permissible Irms at 10° C internal temperature rise (general guide)<br> W PCM b  d  c<br>** PCM = Printed circuit module = pin spacing<br> 11 27.5  5  0.8 0.4<br>Dims. in mm.  13 27.5  7.5 0.8 0.4<br>pin  15 27.5  7.5 0.8 0.4<br> Part number completion:  17 27.5 10   0.8 0.4<br> 20 27.5 12.5 0.8 0.4<br> Version code:  2-pin  = D2  [4-pin version]<br> 19 37.5 10    1  0.4<br>4-pin  = D4<br> Tolerance:  20 %  = M   20 37.5 12.5  1  0.4<br>10 %  = K   24 37.5 12.5  1  0.4<br> 5 %  = J   28 37.5 10    1  0.4<br> Packing:  bulk  = S   31 37.5 20    1  0.4<br> Pin length:  6-2  = SD  35 37.5 20    1  0.4<br> 40 37.5 20    1  0.4<br> Taped version see page 161.<br> 25 52.5 20   1.2 0.8<br> 30 52.5 20   1.2 0.8<br>pin pin  35 52.5 20   1.2 0.8<br>c c<br> 45 52.5 20   1.2 0.8<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br>


Continuation page 137 

136 

D 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

## General Data 

**==> picture [490 x 639] intentionally omitted <==**

**----- Start of picture text -----**<br>
800 VDC (70° C) / 700 VDC (85° C) / 510 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF  9 19 31.5 27.5 2   29  1.7 73.2 DCP4L041006A_ _ _ _ _ _<br>  2 „  9 19 31.5 27.5 2   58  2.5 36.6 DCP4L042006A_ _ _ _ _ _<br>  3 „ 11 21 31.5 27.5 2/4   87  3 24.4 DCP4L043006B_ _ _ _ _ _<br>  4 „ 13 24 31.5 27.5 2/4  116  4 18.3 DCP4L044006D_ _ _ _ _ _<br>  5 „ 13 24 31.5 27.5 2/4  145  4.5 14.6 DCP4L045006D_ _ _ _ _ _<br>  7 „ 17 29 31.5 27.5 2/4  203  6 10.5 DCP4L047006G_ _ _ _ _ _<br>  8 „ 17 29 31.5 27.5 2/4  232  6.5  9.2 DCP4L048006G_ _ _ _ _ _<br> 10 mF 17 34.5 31.5 27.5 2/4  290  8  7.3 DCP4L051006I_ _ _ _ _ _<br>17 29 41.5 37.5 2/4  210  7.5  8.5 DCP4L051007E_ _ _ _ _ _<br> 12 „ 20 39.5 31.5 27.5 2/4  348  9.5  6.1 DCP4L051206J_ _ _ _ _ _<br> 15 „ 20 39.5 31.5 27.5 2/4  435  10.5  4.9 DCP4L051506J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4  315  8.5  7.5 DCP4L051507F_ _ _ _ _ _<br> 18 „ 20 39.5 41.5 37.5 2/4  378  9.5  7.2 DCP4L051807G_ _ _ _ _ _<br> 20 „ 20 39.5 41.5 37.5 2/4  420 10  6.2 DCP4L052007G_ _ _ _ _ _<br> 22 „ 20 39.5 41.5 37.5 2/4  462 10.5  5.9 DCP4L052207G_ _ _ _ _ _<br> 25 „ 24 45.5 41.5 37.5 2/4  525 12.5  5 DCP4L052507H_ _ _ _ _ _<br> 30 „ 24 45.5 41.5 37.5 2/4  630 14  4.1 DCP4L053007H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4  630 14  4.1 DCP4L053007L_ _ _ _ _ _<br> 35 „ 31 46 41.5 37.5 2/4  735 15.5  3.8 DCP4L053507I_ _ _ _ _ _<br> 40 „ 31 46 41.5 37.5 2/4  840 16.5  3.3 DCP4L054007I_ _ _ _ _ _<br> 45 „ 35 50 41.5 37.5 2/4  945 17.5  3.4 DCP4L054507J_ _ _ _ _ _<br> 50 „ 35 50 41.5 37.5 2/4 1050 19  3 DCP4L055007J_ _ _ _ _ _<br>25 45 57 52.5 4  750 18.5  3 DCP4L055009D_ _ _ _ _ _<br> 60 „ 40 55 41.5 37.5 2/4 1260 21.5  2.7 DCP4L056007K_ _ _ _ _ _<br>30 45 57 52.5 4  900 20.5  2.7 DCP4L056009E_ _ _ _ _ _<br> 65 „ 35 50 57 52.5 4  975 22.5  2.2 DCP4L056509F_ _ _ _ _ _<br> 70 „ 45 55 57 52.5 4 1050 23.5  3 DCP4L057009H_ _ _ _ _ _<br> 75 „ 45 55 57 52.5 4 1125 24  2.9 DCP4L057509H_ _ _ _ _ _<br> 80 „ 45 55 57 52.5 4 1200 24.5  3 DCP4L058009H_ _ _ _ _ _<br> 90 „ 45 65 57 52.5 4 1350 25.5  2.5 DCP4L059009J_ _ _ _ _ _<br>100 mF 45 65 57 52.5 4 1500 26.5  2.3 DCP4L061009J_ _ _ _ _ _<br>115 „ 45 65 57 52.5 4 1725 28  2.1 DCP4L061159J_ _ _ _ _ _<br> * General guide                                                                       [2-pin version]<br> New values and box sizes. The box sizes according  PCM d<br>         to main catalogue 2019 are still available on request.  27.5 0.8<br>* Permissible Irms at 10° C internal temperature rise (general guide)  37.5 1<br>** PCM = Printed circuit module = pin spacing  W PCM b  d  c<br> 11 27.5  5  0.8 0.4<br>Dims. in mm. pin  13 27.5  7.5 0.8 0.4<br> 15 27.5  7.5 0.8 0.4<br> 17 27.5 10   0.8 0.4<br> Part number completion:<br>[4-pin version]  20 27.5 12.5 0.8 0.4<br> Version code:  2-pin  = D2   19 37.5 10    1  0.4<br>4-pin  = D4   20 37.5 12.5  1  0.4<br> Tolerance:  20 %  = M   24 37.5 12.5  1  0.4<br>10 %  = K<br> 28 37.5 10    1  0.4<br> 5 %  = J<br> 31 37.5 20    1  0.4<br> Packing:  bulk  = S   35 37.5 20    1  0.4<br> Pin length:  6-2  = SD  40 37.5 20    1  0.4<br> Taped version see page 161.  25 52.5 20   1.2 0.8<br>pin pin  30 52.5 20   1.2 0.8<br>c c  35 52.5 20   1.2 0.8<br> 45 52.5 20   1.2 0.8<br>Rights reserved to amend design data without prior notification..<br>**----- End of picture text -----**<br>


Continuation page 138 

137 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

**==> picture [91 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


## General Data 

**==> picture [491 x 597] intentionally omitted <==**

**----- Start of picture text -----**<br>
900 VDC (70° C) / 760 VDC (85° C) / 550 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF  9 19 31.5 27.5 2   35  2 66.1 DCP4N041006A_ _ _ _ _ _<br>  2 „ 11 21 31.5 27.5 2/4   70  2.5 44 DCP4N042006B_ _ _ _ _ _<br>  3 „ 13 24 31.5 27.5 2/4  105  4 22 DCP4N043006D_ _ _ _ _ _<br>  4 „ 13 24 31.5 27.5 2/4  140  4.5 16.5 DCP4N044006D_ _ _ _ _ _<br>  5 „ 17 29 31.5 27.5 2/4  175  4.5 18 DCP4N045006G_ _ _ _ _ _<br>  7 „ 17 29 31.5 27.5 2/4  245  6.5 9.4 DCP4N047006G_ _ _ _ _ _<br>  8 „ 17 34.5 31.5 27.5 2/4  280  7.5 8.3 DCP4N048006I_ _ _ _ _ _<br> 10 mF 20 39.5 31.5 27.5 2/4  350 10  5.3 DCP4N051006J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4  220  9  6.7 DCP4N051007F_ _ _ _ _ _<br> 15 „ 20 39.5 41.5 37.5 2/4  330 10.5  5.8 DCP4N051507G_ _ _ _ _ _<br> 20 „ 24 45.5 41.5 37.5 2/4  440 13  4.8 DCP4N052007H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4  440 13  4.8 DCP4N052007L_ _ _ _ _ _<br> 22 „ 24 45.5 41.5 37.5 2/4  484 14  4.1 DCP4N052207H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4  484 14  4.1 DCP4N052207L_ _ _ _ _ _<br> 25 „ 31 46 41.5 37.5 2/4  550 15.5  3.8 DCP4N052507I_ _ _ _ _ _<br> 30 „ 31 46 41.5 37.5 2/4  660 16.5  3.4 DCP4N053007I_ _ _ _ _ _<br>25 45 57 52.5 4  540 15  4.5 DCP4N053009D_ _ _ _ _ _<br> 35 „ 35 50 41.5 37.5 2/4  770 18  3.2 DCP4N053507J_ _ _ _ _ _<br>25 45 57 52.5 4  630 16  4 DCP4N053509D_ _ _ _ _ _<br> 40 „ 40 55 41.5 37.5 2/4  880 19.5  3.2 DCP4N054007K_ _ _ _ _ _<br>30 45 57 52.5 4  720 18  3.5 DCP4N054009E_ _ _ _ _ _<br> 50 „ 35 50 57 52.5 4  900 22  3.3 DCP4N055009F_ _ _ _ _ _<br> 60 „ 45 55 57 52.5 4 1080 23  3 DCP4N056009H_ _ _ _ _ _<br> 70 „ 45 65 57 52.5 4 1260 24.5  3.3 DCP4N057009J_ _ _ _ _ _<br> 80 „ 45 65 57 52.5 4 1440 25.5  2.8 DCP4N058009J_ _ _ _ _ _<br> * General guide<br> New values and box sizes. The box sizes according<br>         to main catalogue 2019 are still available on request.<br>* Permissible Irms at 10° C internal temperature rise (general guide)  Part number com Version code:  2-pin pletion:= D2<br>** PCM = Printed circuit module = pin spacing 4-pin  = D4<br> Tolerance:  20 %  = M<br>Dims. in mm. 10 %  = K<br> 5 %  = J<br> Packing:  bulk  = S<br> Pin length:  6-2  = SD<br> Taped version see page 161.<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br>


Continuation page 139 

138 

D 

## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ 

## Continuation 

## General Data 

**==> picture [490 x 337] intentionally omitted <==**

**----- Start of picture text -----**<br>
1100 VDC (70° C) / 920 VDC (85° C) / 670 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF  9 19 31.5 27.5 2   43  2 86 DCP4P041006A_ _ _ _ _ _<br>  2 „ 13 24 31.5 27.5 2/4   86  4 19 DCP4P042006D_ _ _ _ _ _<br>  3 „ 15 26 31.5 27.5 2/4  129  5 13.6 DCP4P043006F_ _ _ _ _ _<br>  4 „ 17 29 31.5 27.5 2/4  172  6 10.8 DCP4P044006G_ _ _ _ _ _<br>  5 „ 17 34.5 31.5 27.5 2/4  215  7.5  7.8 DCP4P045006I_ _ _ _ _ _<br>  7 „ 20 39.5 31.5 27.5 2/4  301  9  6.5 DCP4P047006J_ _ _ _ _ _<br>19 32 41.5 37.5 2/4  203  7.5 10 DCP4P047007F_ _ _ _ _ _<br>  8 „ 20 39.5 41.5 37.5 2/4  232  8 10 DCP4P048007G_ _ _ _ _ _<br> 10 mF 20 39.5 41.5 37.5 2/4  290  9.5  7.2 DCP4P051007G_ _ _ _ _ _<br> 12 „ 24 45.5 41.5 37.5 2/4  348 11  6.6 DCP4P051207H_ _ _ _ _ _<br> 15 „ 24 45.5 41.5 37.5 2/4  435 12  5.6 DCP4P051507H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4  435 12  5.6 DCP4P051507L_ _ _ _ _ _<br> 18 „ 31 46 41.5 37.5 2/4  522 13.5  5 DCP4P051807I_ _ _ _ _ _<br> 20 „ 35 50 41.5 37.5 2/4  580 15  4.7 DCP4P052007J_ _ _ _ _ _<br>25 45 57 52.5 4  420 14.5  4.9 DCP4P052009D_ _ _ _ _ _<br> 22 „ 35 50 41.5 37.5 2/4  638 15.5  4.4 DCP4P052207J_ _ _ _ _ _<br>25 45 57 52.5 4  462 15  4.5 DCP4P052209D_ _ _ _ _ _<br> 25 „ 40 55 41.5 37.5 2/4  725 16.5  4.6 DCP4P052507K_ _ _ _ _ _<br>30 45 57 52.5 4  525 16  4.4 DCP4P052509E_ _ _ _ _ _<br> 30 „ 35 50 57 52.5 4  630 17.5  4.4 DCP4P053009F_ _ _ _ _ _<br> 35 „ 35 50 57 52.5 4  735 18  4 DCP4P053509F_ _ _ _ _ _<br> 40 „ 35 50 57 52.5 4  840 18  4.3 DCP4P054009F_ _ _ _ _ _<br> 45 „ 45 55 57 52.5 4  945 20  4.1 DCP4P054509H_ _ _ _ _ _<br> 50 „ 45 65 57 52.5 4 1050 21  4.1 DCP4P055009J_ _ _ _ _ _<br> 60 „ 45 65 57 52.5 4 1260 23  3.5 DCP4P056009J_ _ _ _ _ _<br>1300 VDC (70° C) / 1100 VDC (85° C) / 800 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>**----- End of picture text -----**<br>


|25 „<br>40<br>55<br>41.5<br>37.5<br>30<br>45<br>57<br>52.5<br>30 „<br>35<br>50<br>57<br>52.5<br>35 „<br>35<br>50<br>57<br>52.5<br>40 „<br>35<br>50<br>57<br>52.5<br>45 „<br>45<br>55<br>57<br>52.5|2/4<br>725<br>16.5<br>4<br>525<br>16<br>4<br>630<br>17.5<br>4<br>735<br>18<br>4<br>840<br>18<br>4<br>945<br>20|4.6<br>4.4<br>4.4<br>4<br>4.3<br>4.1|DCP4P052507K_ _ _ _ _ _<br>DCP4P052509E_ _ _ _ _ _<br>DCP4P053009F_ _ _ _ _ _<br>DCP4P053509F_ _ _ _ _ _<br>DCP4P054009F_ _ _ _ _ _<br>DCP4P054509H_ _ _ _ _ _|
|---|---|---|---|
|<br>50 „<br>45<br>65<br>57<br>52.5<br>60„<br>45<br>65<br>57<br>52.5|4<br>1050<br>21<br>4<br>1260<br>23|4.1<br>3.5|<br>DCP4P055009J_ _ _ _ _ _<br>DCP4P056009J_ _ _ _ _ _|
|||||
|1300 VDC (70° C) / 1100 VDC (85° C) / 800 VDC (105° C)||||
|Capacitance<br>W<br>H<br>L<br>PCM**|Pin<br>IS<br>A<br>Irms*(10 kHz)*<br>A|ESR (10 kHz)*<br>m¸|Part number|
|1mF<br>11<br>21<br>31.5<br>27.5<br>2 „<br>15<br>26<br>31.5<br>27.5<br>3 „<br>17<br>29<br>31.5<br>27.5<br>4 „<br>17<br>34.5<br>31.5<br>27.5<br>5 „<br>20<br>39.5<br>31.5<br>27.5<br>19<br>32<br>41.5<br>37.5<br>7 „<br>20<br>39.5<br>41.5<br>37.5<br>8„<br>24<br>45.5<br>41.5<br>37.5|2/4<br>50<br>2.5<br>2/4<br>100<br>4.5<br>2/4<br>150<br>6<br>2/4<br>200<br>6.5<br>2/4<br>250<br>7.5<br>2/4<br>175<br>7<br>2/4<br>245<br>8<br>2/4<br>280<br>9|40<br>16.8<br>10.8<br>10.4<br>9.4<br>11<br>10<br>9.9|DCP4R241006B_ _ _ _ _ _<br>DCP4R242006F_ _ _ _ _ _<br>DCP4R243006G_ _ _ _ _ _<br>DCP4R244006I_ _ _ _ _ _<br>DCP4R245006J_ _ _ _ _ _<br>DCP4R245007F_ _ _ _ _ _<br>DCP4R247007G_ _ _ _ _ _<br>DCP4R248007H_ _ _ _ _ _|
|10mF<br>24<br>45.5<br>41.5<br>37.5<br>28<br>38<br>41.5<br>37.5<br>15 „<br>31<br>46<br>41.5<br>37.5<br>25<br>45<br>57<br>52.5<br>18 „<br>35<br>50<br>41.5<br>37.5<br>25<br>45<br>57<br>52.5<br>20 „<br>40<br>55<br>41.5<br>37.5<br>30<br>45<br>57<br>52.5<br>22 „<br>40<br>55<br>41.5<br>37.5<br>35<br>50<br>57<br>52.5<br>25 „<br>35<br>50<br>57<br>52.5<br>30 „<br>45<br>55<br>57<br>52.5<br>35 „<br>45<br>65<br>57<br>52.5<br>40„<br>45<br>65<br>57<br>52.5|2/4<br>350<br>10.5<br>2/4<br>350<br>10.5<br>2/4<br>525<br>14<br>4<br>375<br>13<br>2/4<br>630<br>15.5<br>4<br>450<br>14.5<br>2/4<br>700<br>17.5<br>4<br>500<br>16<br>2/4<br>770<br>18<br>4<br>550<br>17.5<br>4<br>625<br>19<br>4<br>750<br>20<br>4<br>875<br>21<br>4<br>1000<br>22|7.2<br>7.2<br>4.8<br>6<br>4.4<br>4.9<br>4<br>4.4<br>3.8<br>4.3<br>3.6<br>4<br>4.1<br>3.7|DCP4R251007H_ _ _ _ _ _<br>DCP4R251007L_ _ _ _ _ _<br>DCP4R251507I_ _ _ _ _ _<br>DCP4R251509D_ _ _ _ _ _<br>DCP4R251807J_ _ _ _ _ _<br>DCP4R251809D_ _ _ _ _ _<br>DCP4R252007K_ _ _ _ _ _<br>DCP4R252009E_ _ _ _ _ _<br>DCP4R252207K_ _ _ _ _ _<br>DCP4R252209F_ _ _ _ _ _<br>DCP4R252509F_ _ _ _ _ _<br>DCP4R253009H_ _ _ _ _ _<br>DCP4R253509J_ _ _ _ _ _<br>DCP4R254009J_ _ _ _ _ _|
|* General guide||||
|New values and box sizes. The box sizes according to main catalogue 2019 are still available on request.<br>** PCM = Printed circuit module = pin spacing<br> *Permissible Irmsat 10° C internal temperature rise (general guide)                                                                      Dims. in mm.<br>Rights reserved to amend design data without prior notification.||||



Continuation page 140 

139 

D 

## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ 

## Continuation 

## General Data 

**==> picture [491 x 597] intentionally omitted <==**

**----- Start of picture text -----**<br>
1500 VDC (70° C) / 1200 VDC (85° C) / 870 VDC (105° C)<br>Capacitance W H L PCM** Pin IS Irms*(10 kHz)* ESR (10 kHz)* Part number<br>A A m¸<br>  1 mF 13 24 31.5 27.5 2/4  59  3 33.3 DCP4S041006D_ _ _ _ _ _<br>  2 „ 17 29 31.5 27.5 2/4 118  5 15.6 DCP4S042006G_ _ _ _ _ _<br>  3 „ 19 32 41.5 37.5 2/4 123  6 15 DCP4S043007F_ _ _ _ _ _<br>  4 „ 20 39.5 41.5 37.5 2/4 164  7 13.3 DCP4S044007G_ _ _ _ _ _<br>  5 „ 20 39.5 41.5 37.5 2/4 205  8 10.2 DCP4S045007G_ _ _ _ _ _<br>  7 „ 24 45.5 41.5 37.5 2/4 287  9.5 8.9 DCP4S047007H_ _ _ _ _ _<br>28 38 41.5 37.5 2/4 287  9.5 8.4 DCP4S047007L_ _ _ _ _ _<br>  8 „ 31 46 41.5 37.5 2/4 328 11 7.6 DCP4S048007I_ _ _ _ _ _<br> 10 mF 31 46 41.5 37.5 2/4 410 12.5 5.9 DCP4S051007I_ _ _ _ _ _<br> 12 „ 35 50 41.5 37.5 2/4 492 14.5 5 DCP4S051207J_ _ _ _ _ _<br>25 45 57 52.5 4 348 14 5.2 DCP4S051209D_ _ _ _ _ _<br> 15 „ 40 55 41.5 37.5 2/4 615 17 4.3 DCP4S051507K_ _ _ _ _ _<br>30 45 57 52.5 4 435 16 4.4 DCP4S051509E_ _ _ _ _ _<br> 18 „ 35 50 57 52.5 4 522 17.5 4.3 DCP4S051809F_ _ _ _ _ _<br> 20 „ 35 50 57 52.5 4 580 18 4.1 DCP4S052009F_ _ _ _ _ _<br> 22 „ 45 55 57 52.5 4 638 20 4.1 DCP4S052209H_ _ _ _ _ _<br> 25 „ 45 55 57 52.5 4 725 20.5 3.9 DCP4S052509H_ _ _ _ _ _<br> 30 „ 45 65 57 52.5 4 870 21.5 4 DCP4S053009J_ _ _ _ _ _<br> * General guide                                                                   [2-pin version]<br> New range  PCM d<br>* Permissible Irms at 10° C internal temperature rise    27.5 0.8<br>    (general guide)  37.5 1<br>** PCM = Printed circuit module = pin spacing<br>Dims. in mm.<br>pin<br> Part number completion:<br>[4-pin version]<br> Version code:  2-pin  = D2<br>4-pin  = D4<br> Tolerance:  20 %  = M   W PCM b  d  c<br>10 %  = K   11 27.5  5  0.8 0.4<br> 5 %  = J   13 27.5  7.5 0.8 0.4<br> Packing:  bulk  = S   15 27.5  7.5 0.8 0.4<br> Pin length:  6-2  = SD  17 27.5 10   0.8 0.4<br> Taped version see page 161.  20 27.5 12.5 0.8 0.4<br> 19 37.5 10    1  0.4<br>pinc pinc  20 37.5 12.5  1  0.4<br> 24 37.5 12.5  1  0.4<br>                                                                       Plate versions page 144  28 37.5 10    1  0.4<br> 31 37.5 20    1  0.4<br> 35 37.5 20    1  0.4<br> 40 37.5 20    1  0.4<br> 25 52.5 20   1.2 0.8<br> 30 52.5 20   1.2 0.8<br> 35 52.5 20   1.2 0.8<br> 45 52.5 20   1.2 0.8<br>Example<br>Rights reserved to amend design data without prior notification.<br>**----- End of picture text -----**<br>


Continuation page 141 

140 

## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ 

## Continuation 

**==> picture [92 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


## 500 VDC 

Impedance change with frequency (general guide) 

**==> picture [492 x 610] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 1<br>(general guide)<br>Z PCM 27.5 Z PCM 37.5<br>� �<br>0.1 0.1<br>7 7<br>5 5<br>3 3<br>0.01 0.01<br>7 7<br>5 5<br>3 3<br>0.001 0.001<br>Permissible AC current in relation to   104 3 5 7 105 106 104 3 5 7 105 106<br>frequency at  20° C internal temperature   f/Hz f/Hz<br>rise (general guide)<br>16 24 40<br>IrmsA IrmsA IrmsA 180 µF<br>32<br>12 18<br>16 28<br>10 14 24 120 µF<br>8 12 20<br>6 10 µF 10 16<br>8<br>12<br>42 PCM 27.5 642 PCM 37.5 84 PCM 52.5<br>0 0 0<br>102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105<br>Hz Hz Hz<br>600 VDC<br>Impedance change with frequency   1 1<br>(general guide) PCM 37.5 PCM 52.5<br>Z Z<br>� �<br>0.1 0.1<br>7 7<br>5 5<br>3 3<br>0.01 0.01<br>7 7<br>5 5<br>3 3<br>0.001 0.001<br>104 3 5 7 105 106 104 3 5 7 105 106<br>f/Hz f/Hz<br>frequency at Permissible AC current in relation to   20° C internal temperature   IrmsA24 IrmsA4032 120 µF<br>rise (general guide) 1816 28<br>14 24 80 µF<br>12 20<br>10 16<br>8<br>12<br>64 PCM 37.5 8 PCM 52.5<br>2 4<br>0 0<br>102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105<br>Hz Hz<br>22 µF<br>30 µF<br>60 µF<br>45 µF<br>--<br>--<br>--<br>80 µF<br>120 µF<br>140 µF<br>--60 µF--50 µF--40 µF--30 µF<br>--45 µF--35 µF--30 µF--25 µF<br>--<br>-- 5 µF<br>--<br>10 µF<br>22 µF<br>**----- End of picture text -----**<br>


Continuation page 142 

141 

## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ 

## Continuation 

**==> picture [91 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


## 800 VDC 

Impedance change with frequency (general guide) 

**==> picture [496 x 596] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 1 1<br>PCM 27.5 PCM 37.5 PCM 52.5<br>Z Z Z<br>� � �<br>0.1 0.1 0.1<br>7 7 7<br>5 5 5<br>3 3 3<br>0.01 0.01 0.01<br>7 7 7<br>5 5 5<br>3 3 3<br>0.001104 3 5 7 105 106 0.001104 3 5 7 105 106 0.001104 3 5 7 105 106<br>f/Hz f/Hz f/Hz<br>Permissible AC current in relation to frequency at  20° C internal temperature rise (general guide)<br>16 24 40<br>IrmsA IrmsA IrmsA<br>PCM 27.5 32<br>12 18<br>16 28<br>10 14 24 60 µF<br>8 12 20<br>6 5 µF 10 16<br>8<br>12<br>4 64 PCM 37.5 8 PCM 52.5<br>2 2 4<br>0 0 0<br>102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105<br>Hz Hz Hz<br>900 VDC<br>Impedance change with frequency   1 1<br>(general guide) PCM 37.5 PCM 52.5<br>Z Z<br>� �<br>0.1 0.1<br>7 7<br>5 5<br>3 3<br>0.01 0.01<br>7 7<br>5 5<br>3 3<br>0.001 0.001<br>104 3 5 7 105 106 104 3 5 7 105 106<br>f/Hz f/Hz<br>frequency at Permissible AC current in relation to   20° C internal temperature   IrmsA24 IrmsA4032 80 µF<br>18<br>rise (general guide) 16 28<br>14 24 50 µF<br>12 20<br>10 16<br>8<br>12<br>64 PCM 37.5 8 PCM 52.5<br>2 4<br>0 0<br>102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105<br>Hz Hz<br>100 µF<br>5 µF<br>25 µF<br>30 µF<br>25 µF<br>20 µF<br>--<br>---- 50 µF<br>70 µF<br>80 µF<br>--<br>--<br>-- 15 µF<br>20 µF<br>25 µF<br>--<br>--<br>----<br>50 µF<br>60 µF<br>100 µF90 µF<br>--30 µF--25 µF--20 µF<br>**----- End of picture text -----**<br>


Continuation page 143 

142 

D 

## ~~WIMA DC-LINK MKP 4WIMA FKP 4~~ 

## Continuation 

**==> picture [182 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
1100 VDC<br>Impedance change with frequency (general guide)<br>**----- End of picture text -----**<br>


**==> picture [492 x 596] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 1 1<br>PCM 27.5 PCM 37.5 PCM 52.5<br>Z Z Z<br>� � �<br>0.1 0.1 0.1<br>7 7 7<br>5 5 5<br>3 3 3<br>0.01 0.01 20 µF 0.01<br>7 7 7<br>5 5 5<br>3 3 3<br>0.001104 3 5 7 105 106 0.001104 3 5 7 105 106 0.001104 3 5 7 105 106<br>f/Hz f/Hz f/Hz<br>Permissible AC current in relation to frequency at  20° C internal temperature rise (general guide)<br>16 24 40<br>IrmsA PCM 27.5 IrmsA IrmsA32<br>12 7 µF 1816 20 µF 28 60 µF<br>108 5 µF 1412 2420 40 µF<br>6 10 16 30 µF<br>8<br>4 2 µF 6 12<br>2 42 PCM 37.5 84 PCM 52.5<br>0 0 0<br>102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105<br>Hz Hz Hz<br>1300 VDC<br>Impedance change with frequency (general guide)<br>1 1 1<br>PCM 27.5 PCM 37.5 PCM 52.5<br>Z Z Z<br>� � �<br>0.1 0.1 0.1<br>7 7 7<br>5 5 5<br>3 3 3<br>0.01 0.01 0.01<br>7 7 7<br>5 5 5<br>3 3 3<br>0.001104 3 5 7 105 106 0.001104 3 5 7 105 106 0.001104 3 5 7 105 106<br>f/Hz f/Hz f/Hz<br>Permissible AC current in relation to frequency at  20° C internal temperature rise (general guide)<br>16 24 40<br>IrmsA PCM 27.5 IrmsA PCM 37.5 IrmsA32 PCM 52.5<br>12 18<br>16 28<br>10 14 24 25 µF<br>8 12 20 20 µF<br>6 10 16<br>8<br>12<br>4 6<br>4 8<br>2 2 4<br>0 0 0<br>102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105 102 2 5 103 2 5 104 2 5 f 105<br>Hz Hz Hz<br>5 µF 10 µF<br>5 µF 10 µF<br>2 µF<br>--<br>--<br>-- 5 µF<br>7 µF<br>--<br>--<br>-- 30 µF<br>40 µF<br>60 µF<br>--<br>--<br>--<br>20 µF<br>25 µF<br>40 µF<br>**----- End of picture text -----**<br>


Continuation page 144 

143 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

**==> picture [91 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


## Plate versions 

**==> picture [492 x 575] intentionally omitted <==**

**----- Start of picture text -----**<br>
L L L<br>H<br>H H<br>h 0.6 0.6<br>0.6<br>14 15 c 15 d 12 c 12 14 d c d<br>W W W h<br>�0.8 �0.15 �0.15 �0.15 �0.15 19.5<br>�0.8<br>7.5�0.8 e<br>6.1�0.1 e f<br>a a<br>b a b<br>Ø<br>Version L �a0.5 �b0.5 �0.5c �h0.8 Version L �a0.5 �0.5c �d0.8 �e0.8 �Ø0.1 Version L �a0.5 �b0.5 �0.5c �d0.15 �e0.8 �0.1f �h0.8<br>A1 41.5 17.5 28 7.5 0 A1.6 41.5 18 6 21.5 16 7 A2 41.5 36 46.5 14.5 22 7.5 8.4 0<br>A1.5 41.5 17.5 28 7.5 3.5 A1.6.1 41.5 22 10 18.5 13 7 A2.4.1 41.5 33.5 39.5 7.5 22 13 8.4 0<br>A1.6.2 41.5 23 10 18.5 13 8 A2.6.1 41.5 31.5 41.5 14 22 13 6.1 3.5<br>A2.6.2 41.5 31.5 41.5 14 22 13 6.1 0<br>A2.8 41.5 36 46.5 14.5 22 7.5 8.4 3.5<br>W L W L W L<br>h h<br>H<br>H H<br>�170.8 6.5�0.15 6.1�0.1 �170.8 6.5�0.158.4�0.1 l 5.5�0.157�0.1<br>0.6 ab 0.6 22 abc 22 0.6 12 ac 12<br>�0.15 �0.15<br>d c d �0.15 �0.15<br>Version L �a0.5 �b0.5 �0.5c �0.15d �h0.8 Version L �a0.5 �0.5b �0.5c �h0.8 Version L �a0.5 �0.5c �0.8l<br>A3 41.5 17.5 27.5 7.5 15 0 A3.9 41.5 40.5 46.5 14.5 0 A3.8 41.5 W �17 18 6 23<br>A3.5 41.5 17.5 27.5 7.5 15 3 A3.11 41.5 40.5 46.5 14.5 3 A3.8.1 41.5 W �17 22 10 17.5<br>A3.12 41.5 17.5 30 7.5 16.5 0 A3.8.2 41.5 W �17 22 10 23<br>0.8<br>�<br>0.8 2<br>�<br>2<br>0.8<br>�<br>2<br>**----- End of picture text -----**<br>


Continuation page 145 

144 

D 

## ~~WIMA DC-LINK MKP 4~~ 

## Continuation 

## Plate versions 

**==> picture [487 x 239] intentionally omitted <==**

**----- Start of picture text -----**<br>
W L<br>H Version B W L Dims. in mm<br>0.6 H<br>f<br>6 -1<br>PCM<br>12�0.15 d b =PC Module<br>0.5 at the pin exit points<br>(� 0.4)<br>a b<br>L PCM<br>b �0.15<br>Additional special versions can be<br>Version L �a0.8 �b0.8 �0.8f �d0.1 31.541.5 28.538.5 88 realized. Please contact us with your  specific needs.<br>A4.9 31.5 W �15 44 47 57 4.5<br>A4.10 31.5 W �15 43 59 69 6.1<br>A4.2 41.5 W �15 54 57 67 4.5<br>A4 41.5 W �15 53 69 79 6.1<br>0.8<br>�<br>2<br>**----- End of picture text -----**<br>


Possible connecting respective plate versions - depending on box size 

|Version code|Version code|D2|D4|B8|1A|1H|1I|1J|1S|2A|2F|2J|2K|2M|3A|3G|3K|3L|3M|3N|3P|3Q|4A|4C|4L|4M|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|W x H x L|Size<br>Code|2-pin|4-pin|B8|A1|A1.5|A1.6|A1.6.1|A1.6.2|A2|A2.4.1|A2.6.1|A2.6.2|A2.8|A3|A3.5|A3.8|A3.8.1|A3.8.2|A3.9|A3.11|A3.12|A4|A4.2|A4.9|A4.10|
|9 x 19 x 31.5|6A||||||||||||||||||||||||||
|11 x 21 x 31.5|6B||||||||||||||||||||||||||
|13 x 24 x 31.5|6D||||||||||||||||||||||||||
|15 x 26 x 31.5|6F||||||||||||||||||||||||||
|17 x 29 x 31.5|6G||||||||||||||||||||||||||
|17 x 34.5 x 31.5|6I||||||||||||||||||||||||||
|20 x 39.5 x 31.5|6J||||||||||||||||||||||||||
|13 x 24 x 41.5|7C||||||||||||||||||||||||||
|15 x 26 x 41.5|7D||||||||||||||||||||||||||
|17 x 29 x 41.5|7E||||||||||||||||||||||||||
|19 x 32 x 41.5|7F||||||||||||||||||||||||||
|20 x 39.5 x 41.5|7G||||||||||||||||||||||||||
|24 x 45.5 x 41.5|7H||||||||||||||||||||||||||
|28 x 38 x 41.5|7L||||||||||||||||||||||||||
|31 x 46 x 41.5|7I||||||||||||||||||||||||||
|35 x 50 x 41.5|7J||||||||||||||||||||||||||
|40 x 55 x 41.5|7K||||||||||||||||||||||||||



145 

D 

## Recommendation for Processing and Application of Through-Hole Capacitors 

## ~~Soldering Process~~ 

Internal temperature of the capacitor must be kept as follows: 

Polyester: preheating: Tmax.  125° C soldering: Tmax.  135° C Polypropylene: preheating: Tmax.  100° C soldering: Tmax.  110° C 

Single wave soldering Soldering bath temperature:  T P 260 ° C Dwell time: t P 5 sec 

Double wave soldering Soldering bath temperature: T P 260 ° C Dwell time: St P 5 sec 

Due to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. 

## ~~WIMA Quality and Environmental Philosophy~~ 

## ~~ISO 9001:2015 Certification~~ 

ISO 9001:2015 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2015 of our factories by the infaz (Institut für Auditierung und Zertifizierung) certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. 

## ~~WIMA WPCS~~ 

The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application during production process: 

- ” incoming material inspection 

## ~~WIMA Environmental Policy~~ 

All WIMA capacitors, irrespective of whether through-hole devices or SMD, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. 

– Lead – PBB/PBDE – PCB – Arsenic – CFC – Cadmium – Hydrocarbon chloride – Mercury – Chromium 6+ – etc. 

We merely use pure, recyclable materials for packing our components, such as: 

- ” carton 

- ” cardboard 

- ” adhesive tape made of paper 

- ” polystyrene 

## ~~RoHS Compliance~~ 

According to the RoHS Directive 2011/65/EU as amended from time to time certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 2006. For the sake of the environment WIMA has refraind from using such substances since years already. 

**WIMA Kondensatoren sind bleifrei konform RoHS 2011/65/EU WIMA capacitors are lead free in accordance with RoHS 2011/65/EU** 

Tape for lead-free WIMA capacitors 

- ” metallization 

- ” film inspection 

- ” schoopage 

- ” pre-healing 

- ” pin attachment 

- ” cast resin preparation/ encapsulation 

- ” 100% final inspection 

- ” Testing as per customer requirements 

We almost completely refrain from using packing materials such as: 

- ” adhesive tapes made of plastic 

- ” metal clips 

## ~~DIN EN ISO 14001:2004~~ 

WIMA’s environmental management has been established in accordance with the guidelines of DIN EN ISO 14001:2004 to optimize the production processes with regard to energy and resources. 

15 

Typical Dimensions for Taping Configuration 

**==> picture [92 x 52] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|D<br>Til Dii f|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|ypca mensons or<br>Taping Configuration||||||||||||||||||||||||
|W0<br>H1<br>H<br>Diagram 2: PCM 10/15 m||||||P2<br>|||||P||||W2<br>W1<br>W|t<br>Vh||||||||
|||||||||||||||||||||||||
||||H1|||||||||||||||||||||
|||||W0<br>H||P1||||||||||||||||||
|||||||||||||||||||||||||
|||||||||||||||||||||||||
||||||||||||||D0|||||||||||
|||||||||||||||||||||||||
|||||||P<br>P1<br>P0<br>F|||||||d|||||||||||
|||||||||||||||||||||||||
|||||||||||||||||||||||||
|||||||||||||||||||||||||
|||||||||||||||||||||||||
|||||||||||||||||||||||||
|||||||||||||||||||||||||
||||||||||d||||||||||||d|||
||||||F<br>m||||P<br>P||0<br>2|||||||||||||
|||||||||||||||||||||||||
|Designation|Symbol|PCM 2.5 taping<br>PCM 5 taping||||||||||||Dimensions for Radial Taping<br>PCM 7.5 taping<br>PCM 10 taping*<br>PCM 15 taping*<br>PCM 22.5 taping<br>PCM 27.5 taping||||||||||
|Carrier tape width|W|18.0p0.5||||||18.0p0.5||||||18.0p0.5|||18.0p0.5||18.0p0.5|||18.0p0.5|18.0p0.5|
|Hold-down tape width|W0|6.0for hot-sealing<br>adhesive tape||||||6.0for hot-sealing<br>adhesive tape||||||12.0for hot-sealing<br>adhesive tape|||12.0for hot-sealing<br>adhesive tape||12.0for hot-sealing<br>adhesive tape|||12.0for hot-sealing<br>adhesive tape|12.0for hot-sealing<br>adhesive tape|
|Hole position|W1|9.0p0.5||||||9.0p0.5||||||9.0p0.5|||9.0p0.5||9.0p0.5|||9.0p0.5|9.0p0.5|
|Hold-down tape position|W2|0.5 to 3.0 max.||||||0.5 to 3.0 max.||||||0.5 to 3.0 max.|||0.5 to 3.0 max.||0.5 to 3.0 max.|||0.5 to 3.0 max.|0.5 to 3.0 max.|
|Feed hole diameter|D0|4.0p0.2||||||4.0p0.2||||||4.0p0.2|||4.0p0.2||4.0p0.2|||4.0p0.2|4.0p0.2|
|Pitch of component|P|12.7p1.0||||||12.7p1.0||||||12.7p1.0|||25.4p1.0||25.4p1.0|||38.1p1.5|3*8.1p1.5or 50.8p1.5|
|Feed hole pitch<br>|P0|cumulative pitch<br>12.7p0.3    error max.<br> 1.0 mm/20 pitch||||||cumulative pitch<br>12.7p0.3    error max.<br> <br> 1.0 mm/20 pitc||||||<br> cumulative pitc<br>12.7p0.3    error max.<br>h<br> 1.0 mm/20 pitc|||h<br> cumulative pitch<br>12.7p0.3    error max.<br>h<br> 1.0 mm/20 pitch||<br> cumulative pitch<br>12.7p0.3    error max.<br> <br> 1.0 mm/20 pitch|||cumulative pitch<br>12.7p0.3    error max.<br> 1.0 mm/20 pitch|cumulative pitch<br>12.7p0.3    error max.<br> 1.0 mm/20 pitch|
|~~d hl~~||||||||||||||||||||||||
|~~Fee oe centre~~<br>to pin|P1|5.1p0.5||||||3.85p0.7||||||2.6p0.7|||7.7p0.7||5.2p0.7|||7.8p0.7|5.3p0.7|
|Hole centre to<br>component centre|P2|6.35p1.3||||||6.35p1.3||||||6.35p1.3|||12.7p1.3||12.7p1.3|||19.05p1.3|19.05p1.3|
|Feed hole centre to bottom<br>edge of the component|H|16.5p0.3||||||16.5p0.3||||||16.5p0.5|||16.5p0.5||16.5p0.5|||16.5p0.5|16.5p0.5|
|||18.5p0.5||||||18.5p0.5||||||18.5p0.5|||18.5p0.5||18.5p0.5|||18.5p0.5|18.5p0.5|
|Feed hole centre to top<br>edge of the component|H1|H+Hcomponent< H1<br>32.25 max.||||||H+Hcomponent< H1<br>32.25 max.||||||H+Hcomponent< H1<br>24.5 to 31.5|||H+Hcomponent< H1<br>25.0 to 31.5||H+Hcomponent< H1<br>26.0 to 37.0|||H+Hcomponent< H1<br>30.0 to 43.0|H+Hcomponent< H1<br>35.0 to 45.0|
|Pin spacing at<br>upper edge of carrier tape|F|2.5p0.5||||||5.0<br>+0.8<br> –0.2||||||7.5p0.8|||10.0p0.8||15p0.8|||22.5p0.8|27.5p0.8|
|Pin diameter|d|0.4p0.05||||||0.5p0.05||||||„0.5p0.05 or0.6–0.05<br>+0.06|||„0.5p0.05 or0.6–0.05<br>+0,06||0.8–0.05<br>+0,08|||0.8–0.05<br>+0,08|0.8–0.05<br>+0.08|
|Component alignment|Dh|p2.0 max.||||||p2.0 max.||||||p3.0 max.|||p3.0 max.||p3.0 max.|||p3.0 max.|p3.0 max.|
|Total tape thickness|t|0.6p0.2||||||0.6p0.2||||||0.6p0.2|||0.6p0.2||0.6p0.2|||0.6p0.2|0.6p0.2|
|Package<br>(see also page 162)||ROLL/AMMO||||||||||||AMMO||||||||||
|||REEL P360 max.<br>B 52p2      depending on<br>P30p1<br>58p2      comp. dimension||||||||||||s<br>52p2<br>54p2      depending<br> REELP360 max.<br>B 58p2 orREEL<br>P500 max.<br>B 60p2      on PCM and<br>P30p1<br>66p2<br>P25p1<br>68p2      component dimensions||||||||||
|Unit||||||||||||||see details page 163.||||||||||
|Dims in mm.<br>„Diameter of pins see General Data.<br>Please clarify customer-specific deviations with the manufacturer.<br> *PCM 10 and PCM 15 can be crimped to  PCM 7.5.<br>Position of components according to PCM 7.5 (sketch 1). P0= 12.7 or 15.0 is possible||||||||||||||||||||||||



Dims in mm. 

„  Diameter of pins see General Data. 

Please clarify customer-specific deviations with the manufacturer. 

* PCM 10 and PCM 15 can be crimped to  PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P0 = 12.7 or 15.0 is possible 

161 

**==> picture [7 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>**----- End of picture text -----**<br>


## Types of Tape Packaging of Capacitors for Automatic Radial Insertion 

**==> picture [466 x 222] intentionally omitted <==**

**----- Start of picture text -----**<br>
˜ ROLL Packaging ˜ AMMO Packaging ˜  REEL Packaging<br>30±1<br>| V) 25±1<br>L AA)<br>50 max.<br>50 max. 70 max. B<br>Se<br>a a<br>340 max. 340 max.<br>490 max.<br>340 max. 370 max.<br>360 max. 500 max.<br>340 max.<br>**----- End of picture text -----**<br>


## ~~BAR CODE (Labelling)~~ 

Labelling of package units in plain text and with alphanumerical Bar Code 

**==> picture [239 x 27] intentionally omitted <==**

**----- Start of picture text -----**<br>
               BARCODE PDF417<br>pest capacitors Made in Germany                BARCODE 2D Datamatrix<br>**----- End of picture text -----**<br>


- „ WIMA supplier number 

- „ Date code 

- „ Customer‘s P/O number 

- „ P/O line 

- „ Customer‘s part number 

- „ WIMA part number 

- „ Quantity 

- „ WIMA confirmation number 

- „ Country of origin 

- „ Customer name 

- „ Handling unit number 

- „ Week of delivery. 

In addition part description of 

- article 

- capacitance value 

- rated voltage 

- dimensions 

- technical note 

- capacitance tolerance 

- packing 

- connecting information 

162 

D 

Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm 

**==> picture [489 x 616] intentionally omitted <==**

**----- Start of picture text -----**<br>
pcs. per packing unit<br>ROLL REEL AMMO<br>Size<br>PCM bulk P 360 P 500 340  [x]  340 490  [x]  370<br>H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5<br>W H L Codes S N O F I H J A C B D<br> 2.5  7  4.6 0B 5000 2200 2500 – 2800 –<br> 3  7.5  4.6 0C 5000 2000 2300 – 2300 –<br>2.5 mm  3.8  8.5  4.6 0D 5000 1500 1800 – 1800 –<br> 4.6  9  4.6 0E 5000 1200 1500 – 1500 –<br> 5.5 10  4.6 0F 5000  900 1200 – 1200 –<br> 2.5  6.5  7.2 1A 5000 2200 2500 – 2800 –<br> 3  7.5  7.2 1B 5000 2000 2300 – 2300 –<br> 3.5  8.5  7.2 1C 5000 1600 2000 – 2000 –<br> 4.5  6  7.2 1D 6000 1300 1500 – 1500 –<br> 4.5  9.5  7.2 1E 4000 1300 1500 – 1500 –<br> 5 10  7.2 1F 3500 1100 1400 – 1400 –<br>5 mm  5.5 5.5  711.5  7.2 7.2 1G1H 40002500 10001000 12001200 –– 12001200 ––<br> 6.5  8  7.2 1I 2500  800 1000 – 1000 –<br> 7.2  8.5  7.2 1J 2500  700 1000 – 1000 –<br> 7.2 13  7.2 1K 2000  700  950 – 1000 –<br> 8.5 10  7.2 1L 2000  600  800 –  800 –<br> 8.5 14  7.2 1M 1500  600  800 –  800 –<br>11 16  7.2 1N 1000  500  600 –  640 –<br> 2.5  7 10 2A 5000 – 2500 4400 2500 –<br> 3  8.5 10 2B 5000 – 2200 4300 2300 4150<br> 4  9 10 2C 4000 – 1700 3200 1700 3000<br>7.5 mm  4.5  9.5 10.3 2D 3500 – 1500 2900 1400 2700<br> 5 10.5 10.3 2E 3000 – 1300 2500 1300 –<br> 5.7 12.5 10.3 2F 2000 – 1000 2200 1100 –<br> 7.2 12.5 10.3 2G 1500 –  900 1800 1000 –<br> 3  9 13 3A 3000 – 1100 2200 – 1900<br> 4  8.5 13.5 FA 3000 –  900 1600 – 1450<br> 4  9 13 3C 3000 –  900 1600 – 1450<br> 4  9.5 13 3D 3000 –  900 1600 – 1400<br>10 mm  5 10 13.5 FB 2000 –  700 1300 – 1200<br> 5 11 13 3F 3000 –  700 1300 – 1100<br> 6 12 13 3G 2400 –  550 1100 – 1000<br> 6 12.5 13 3H 2400 –  550 1100 – 1000<br> 8 12 13 3I 2000 –  400  800 –  740<br> 5 11 18 4B 2400 –  600 1200 – 1150<br> 5 13 19 FC 1000 –  600 1200 – 1200<br> 6 12.5 18 4C 2000 –  500 1000 – 1000<br> 6 14 19 FD 1000 –  500 1000 – 1000<br> 7 14 18 4D 1600 –  450  900 –  850<br> 7 15 19 FE 1000 –  450  900 –  850<br>15 mm  8 15 18 4F 1200 –  400  800 –  740<br> 8 17 19 FF  500 –  400  800 –  740<br> 9 14 18 4H 1200 –  350  700 –  650<br> 9 16 18 4J  900 –  350  700 –  650<br>10 18 19 FG  500 –  300  650 –  590<br>11 14 18 4M 1000 –  300  600 –  540<br> 5 14 26.5 5A 1200 – –  800 –  770<br> 6 15 26.5 5B 1000 – –  700 –  640<br> 7 16.5 26.5 5D  760 – –  600 –  550<br> 8 20 28 FH  500 – –  500 –  480<br>22.5 mm  8.510 18.522 26.528 5FFI  500570* –– ––  480 420 ––  450 380<br>10.5 19 26.5 5G 594* – –  400 –  360<br>10.5 20.5 26.5 5H 594* – –  400 –  360<br>11 21 26.5 5I 561* – –  380 –  350<br>12 24 28 FJ 480* – –  350 –  310<br>*  TPS (Tray-Packing-System). Plate versions may have different packing units.   Moulded versions.  Rights reserved to amend design data without prior notification.<br> Samples and pre-production needs on request.<br>**----- End of picture text -----**<br>


163 

D 

Packing Quantities for Capacitors with Radial Pins in PCM 27.5 mm to 52.5 mm 

**==> picture [490 x 365] intentionally omitted <==**

**----- Start of picture text -----**<br>
pcs. per packing unit<br>ROLL REEL AMMO<br>Size<br>PCM bulk P 360 P 500 340  [x]  340 490  [x]  370<br>H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5<br>W H L Codes S N O F I H J A C B D<br> 9 19 31.5 6A 567* – – 460/340* – –<br>11 21 31.5 6B 459* – – 380/280* – –<br>13 24 31.5 6D 378* – –  300 – –<br>13 25 33 FK 405* – – – – –<br>27.5 mm 1515 2626 31.533 6FFL 324324** –– ––  270– –– ––<br>17 29 31.5 6G 198* – – – – –<br>17 34.5 31.5 6I 198* – – – – –<br>20 32 33 FM 162* – – – – –<br>20 39.5 31.5 6J 162* – – – – –<br> 9 19 41.5 7A 441* – – – – –<br>11 22 41.5 7B 357* – – – – –<br>13 24 41.5 7C 294* – – – – –<br>15 26 41.5 7D 252* – – – – –<br>17 29 41.5 7E 154* – – – – –<br>37.5 mm 1920 3239.5 41.541.5 7F7G 140126** –– –– –– –– ––<br>24 45.5 41.5 7H 112* – – – – –<br>28 38 41.5 7L  84* – – – – –<br>31 46 41.5 7I  84* – – – – –<br>35 50 41.5 7J  35* – – – – –<br>40 55 41.5 7K  28* – – – – –<br>19 31 56 8D 120* – – – – –<br>23 34 56 8E  80* – – – – –<br>48.5 mm 27 37.5 56 8H  84* – – – – –<br>33 48 56 8J  25* – – – – –<br>37 54 56 8L  25* – – – – –<br>25 45 57 9D  70* – – – – –<br>30 45 57 9E  60* – – – – –<br>52.5 mm 35 50 57 9F  25* – – – – –<br>45 55 57 9H  20* – – – – –<br>45 65 57 9J  20* – – – – –<br>**----- End of picture text -----**<br>


* for 2-inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. 

Updated data on www.wima.com 

164 

D 

WIMA Part Number System 

A WIMA part number consists of 18 digits and is composed as follows: 

**==> picture [489 x 138] intentionally omitted <==**

**----- Start of picture text -----**<br>
Field  1 -  4: Type description<br>Field  5 -  6: Rated voltage<br>Field  7 - 10: Capacitance<br>Field 11 - 12: Size and PCM<br>Field 13 - 14: Version code (e.g. Snubber versions)<br>Field 15:  Capacitance tolerance<br>Field 16:  Packing<br>Field 17 - 18: Pin length (untaped)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br>M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D<br>**----- End of picture text -----**<br>


|MKS 2|MKS 2|63 VDC|63 VDC|63 VDC||0.01mF|0.01mF|0.01mF|2.5 x 6.5 x 7.2||-|-||20 %<br>bulk|||6|-2|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||||||||||||||||
|Type description:||Rated voltage:||||Capacitance:|||Size:|||||Tolerance:|||||
|SMD-PET|= SMDT|50 VDC||= B0||22 pF|= 0022||4.8 x 3.3 x 3 Size 1812||= KA|||±20 %<br>= M|||||
|SMD-PEN|= SMDN|63 VDC||= C0||47 pF|= 0047||4.8 x 3.3 x 4 Size 1812||= KB|||±10 %<br>= K|||||
|SMD-PPS|= SMDI|100 VDC||= D0||100 pF|= 0100||5.7 x 5.1 x 3.5 Size 2220||= QA|||±5 %<br>= J|||||
|FKP 02|= FKP0|250 VDC||= F0||150 pF|= 0150||5.7 x 5.1 x 4.5 Size 2220||= QB|||±2.5 %<br>= H|||||
|MKS 02|= MKS0|400 VDC||= G0||220 pF|= 0220||7.2 x 6.1 x 3 Size 2824||= TA|||±1 %<br>= E|||||
|FKS 2|= FKS2|450 VDC||= H0||330 pF|= 0330||7.2 x 6.1 x 5 Size 2824||= TB|||...|||||
|FKP 2|= FKP2|520 VDC||= H2||470 pF|= 0470||10.2 x 7.6 x 5 Size 4030||= VA||||||||
|FKS 3<br>FKP 3|= FKS3<br>= FKP 3|600 VDC<br>630 VDC||= I0<br>= J0||680 pF<br>1000 pF|= 0680<br> = 1100||12.7 x 10.2 x 6 Size 5040 <br>15.3 x 13.7 x 7 Size 6054||= XA<br> = YA|||Packing:|||||
|MKS 2|= MKS2|700 VDC||= K0||1500 pF|= 1150||2.5 x 7 x 4.6 PCM 2.5||= 0B|||AMMO H16.5 340 x 340 = A|||||
|MKP 2|= MKP2|800 VDC||= L0||2200 pF|= 1220||3 x 7.5 x 4.6 PCM 2.5||= 0C|||AMMO H16.5 490 x 370 = B|||||
|MKS 4|= MKS4|850 VDC||= M0||3300 pF|= 1330||2.5 x 6.5 x 7.2 PCM 5||= 1A|||AMMO H18.5 340 x 340 = C|||||
|MKP 4|= MKP4|900 VDC||= N0||4700 pF|= 1470||3 x 7.5 x 7.2 PCM 5||= 1B|||AMMO H18.5 490 x 370 = D|||||
|MKP 10|= MKP1|1000 VDC||= O1||6800 pF|= 1680||2.5 x 7 x 10 PCM 7.5||= 2A|||REEL H16.5 360||||= F|
|FKP 4|= FKP4|1100 VDC||= P0||0.01mF|= 2100||3 x 8.5 x 10 PCM 7.5||= 2B|||REEL H16.5 500||||= H|
|FKP 1|= FKP1|1200 VDC||= Q0||0.022mF|= 2220||3 x 9 x 13 PCM 10||= 3A|||REEL H18.5 360||||= I|
|MKP-X2|= MKX2|1250 VDC||= R0||0.047mF|= 2470||4 x 9 x 13 PCM 10||= 3C|||REEL H18.5 500||||= J|
|MKP-X1 R|= MKX1|1500 VDC||= S0||0.1mF|= 3100||5 x 11 x 18 PCM 15||= 4B|||ROLL H16.5||||= N|
|MKP-Y2|= MKY2|1600 VDC||= T0||0.22mF|= 3220||6 x 12.5 x 18 PCM 15||= 4C|||ROLL H18.5||||= O|
|MP 3-X2|= MPX2|1700 VDC||= TA||0.47mF|= 3470||5 x 14 x 26.5 PCM 22.5||= 5A|||BLISTER W12 180||||= P|
|MP 3-X1|= MPX1|2000 VDC||= U0||1mF|= 4100||6 x 15 x 26.5 PCM 22.5||= 5B|||BLISTER W12 330||||= Q|
|MP 3-Y2|= MPY2|2500 VDC||= V0||2.2mF|= 4220||9 x 19 x 31.5 PCM 27.5||= 6A|||BLISTER W16 330||||= R|
|MP 3R-Y2|= MPRY|3000 VDC||= W0||4.7mF|= 4470||11 x21 x 31.5 PCM 27.5||= 6B|||BLISTER W24 330||||= T|
|MKP 4F|= MKPF|4000 VDC||= X0||10mF|= 5100||9 x 19 x 41.5 PCM 37.5||= 7A|||Bulk/TPS Standard||||= S|
|Snubber MKP|= SNMP|6000 VDC||= Y0||22mF|= 5220||11 x 22 x 41.5 PCM 37.5||= 7B|||...|||||
|Snubber FKP|= SNFP|250 VAC||= 0W||47mF|= 5470||19 x 31 x 56 PCM 48.5||= 8D||||||||
|GTO MKP|= GTOM|275 VAC||= 1W||100mF|= 6100||25 x 45 x 57 PCM 52.5||= 9D||||||||
|DC-LINK MKP|4 = DCP4|300 VAC||= 2W||220mF|= 6220||...||||||||||
|DC-LINK MKP|6 = DCP6|305 VAC||= AW||1000mF|= 7100||||||||||||
|DC-LINK HC|= DCHC|350 VAC<br>440 VAC||= BW<br>= 4W||1500mF <br>...|= 7150||Version code:|||||Pin length (untaped)|||||
|||500 VAC||= 5W|||||Standard<br>= 00|||||3.5 ±0.5 = C9|||||
|||...|||||||Version A1<br>= 1A|||||6 -2<br>= SD|||||
||||||||||Version A1.1.1 = 1B|||||16 ±1<br>= P1|||||
||||||||||Version A2<br>= 2A|||||...|||||
||||||||||...|||||Pin length (taped)|||||
|||||||||||||||none<br>= 00|||||



The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 

159
Updated at June 7, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →