D2W203F11

## **| D2W SERIES** 

## PCB MOUNT 

## Features 

- SIP SSR 

- Ratings to 3.5 A @ 280 VAC 

- DC Control 

- Zero-Crossing (Resistive Loads) Output 

- Internal Snubber Network 

## **PRODUCT SELECTION** 

|**Control Voltage**|**2A**|**3A**|**3.5A**|
|---|---|---|---|
|**3-32 VDC**|D2W202F|D2W203F|D2W203F-11|



## **SPECIFICATIONS** 

## Output[(1)] 

|**Description**|**2A**|**3A**|**3.5A**|
|---|---|---|---|
|**Output Voltage (47-63Hz) [Vrms]**|24-280|24-280|24-280|
|**Transient Overvoltage [Vpk]**|600|600|600|
|**Maximum Off-State Leakage Current**<br>**@ Rated Voltage [mA]**|8|8|8|
|**Minimum Off-State dv/dt**<br>**@ Maximum Rated Voltage [V/µsec](3)**|200|200|200|
|**Maximum Load Current [Arms]**|2|3|3.5|
|**Minimum Load Current [Arms]**|0.06|0.06|0.06|
|**Maximum Surge Current (16.6ms) [Apk]**|28|70|80|
|**Maximum On-State Voltage Drop**<br>**@ Rated Current [Vpk]**|1.4|1.4|1.4|
|**Minimum Power Factor**<br>**(with Maximum Load)**|0.5|0.5|0.5|



Page 1 

Copyright © 2020 Sensata Technologies, Inc. 

www.sensata.com 

## Input[(1)] 

|**Description**|**Parameters**|
|---|---|
|**Control Voltage Range**|3.5-32 VDC|
|**Must Turn On Voltage**|3.0 VDC|
|**Must Turn On Voltage**|1.0 VDC|
|**Typical Input Current @ 5 VDC**|3.0 mA|
|**Nominal Input Impedance**|1500 Ohm|
|**Maximum Turn-On Time [msec]**|½ Cycle|
|**Maximum Turn-Off Time [msec]**|½ Cycle|



## General 

|**Description**|**Parameters**|
|---|---|
|**Dielectric Strength, Input/Output/Base**<br>**(50/60Hz)(2)**|4000 Vrms|
|**Minimum Insulation Resistance**<br>**(@500 VDC)(2)**|109Ohm|
|**Maximum Capacitance, Input/Output**|10 pF|
|**Ambient Operating Temperature Range**|-30 to 80°C|
|**Ambient Storage Temperature Range**|-30 to 125°C|
|**Weight (typical)**|0.6 oz. (17g)|
|**Encapsulation**|Thermally Conductive Epoxy|



## **DIMENSIONS** 

Tolerance, unless otherwise noted: ±0.02 in / 0.5 mm All dimensions are in inches [millimeters] 

PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL 

**==> picture [24 x 33] intentionally omitted <==**

**----- Start of picture text -----**<br>
 0.100<br>TYP.<br> (2.5) _<br>**----- End of picture text -----**<br>


Page 2 

Copyright © 2020 Sensata Technologies, Inc. 

www.sensata.com 

## **THERMAL DERATE INFORMATION** 

## **GENERAL NOTES** 

(1) 

> (2) Dielectric and insulation resistance are measured between input and output 

- (3) Off-State dv/dt test method per EIA/NARM standard RS 

## **AGENCY APPROVALS & CERTIFICATIONS** 

> C € Wh ay @: LR81689 cold\ US 116250 E116950 

E116950 

## **WARNINGS** 

RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE 

- The product’s side panels may be hot, allow the product to cool before touching 

- Follow proper mounting instructions including torque values 

- Do not allow liquids or foreign objects to enter this product 

**Failure to follow these instructions can result in serious injury, or equipment damage.** 

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH 

- Disconnect all power before installing or working with this equipment 

- Verify all connections and replace all covers before turning on power 

**Failure to follow these instructions will result in death or serious injury.** 

Page 3 

Copyright © 2020 Sensata Technologies, Inc. 

www.sensata.com 

Page 4 

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that icular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensa R, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. 

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. 

## **CONTACT US** 

**Americas** +1 (877) 502 5500 – Option 2 sales.crydom@sensata.com **Europe, Middle East & Africa** +44 (1202) 416170 ssr-info.eu@sensata.com sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 

Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. 

www.sensata.com 

Rev: 08/20/20 ECN 20961 FDE-07-01 Rev. B 

Copyright © 2020 Sensata Technologies, Inc.