D2440DH-10

**Panel Mount** _DataSheet_ 

## _**DUAL Series**_ 

- Independently controlled dual output solid-state relay 

- Ratings from 25A to 40A @ 24-530 VAC 

- Industry standard package 

- SCR output for heavy industrial loads 

- DC Control 

- Zero-crossing (resistive loads) or random-fire (inductive loads) output 

## **PRODUCT SELECTION** 

## **Control Voltage** 

4-15 VDC Control 15-32 VDC Control 4-15 VDC Control 15-32 VDC Control 

|**25 A**|**40 A**|
|---|---|
|D2425D|D2440D|
|D2425DE|D2440DE|
|H12D4825D|H12D4840D|
|H12D4825DE|H12D4840D|



## **AVAILABLE OPTIONS** 

**==> picture [260 x 88] intentionally omitted <==**

**----- Start of picture text -----**<br>
Output Current Thermal Pad<br>25:  25 Amps Blank:  Not Included<br>40:  40 Amps H:  Included<br>Series<br>25  D H -10<br>Output Voltage Control Voltage Switching Mode<br>D24:    24-280 VAC D:  4-15 VDC Blank:  Zero Voltage Turn-On<br>H12D48:  48-530 VAC DE:  15-32 VDC -10:  Random Turn-On<br>**----- End of picture text -----**<br>


Required for valid part number 

For options only and not required for valid part number 

## **OUTPUT SPECIFICATIONS (1)** 

|**Description**|**D2425xx**|**D2440xx**|**H12D4825xx**|**H12D4840xx**|
|---|---|---|---|---|
|Operating Voltage (47-63Hz) [Vrms]|24-280|24-280|48-530|48-530|
|Transient Overvoltage [Vpk]|600|600|1200**(2)**|1200**(2)**|
|Maximum Off-State Leakage Current @ Rated Voltage[mArms]|10|10|10|10|
|Minimum Off-State dv/dt @ Maximum Rated Voltage[V/μsec] **(3)**|500|500|500|500|
|Maximum Load Current [Arms] **(4)**|25|40|25|40|
|Minimum Load Current [Arms]|0.15|0.15|0.15|0.15|
|Maximum 1 Cycle Surge Current (50/60Hz) [Apk]|239/250|597/6250|239/250|597/625|
|Maximum On-State Voltage Drop@ Rated Current[Vpk]|1.6|1.6|1.6|1.6|
|Thermal Resistance Junction to Case(Rjc) [°C/W]|1.02|0.63|1.02|0.63|
|Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec]|285/259|1779/1621|285/259|1779/1621|
|Minimum Power Factor(with Maximum Load)|0.5|0.5|0.5|0.5|



**Do not forget to visit us at:** _**www.crydom.com**_ 

Copyright © 2018 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **INPUT SPECIFICATIONS (1)** 

|**Description**|**D24XXD**|**H12D48XXD**|**E-SUFFIX**|
|---|---|---|---|
|Control Voltage Range|4-15 VDC|4-15 VDC|15-32 VDC|
|Minimum Turn-On Voltage|4.0 VDC|4.0 VDC|15.0 VDC|
|Minimum Turn-Off Voltage|1.0 VDC|1.0 VDC|1.0 VDC|
|Typical Input Current @ 5 VDC (@ 24 VDC for E-Suffix)|13 mA|13 mA|15 mA|
|Nominal Input Impedance|300 Ohm|240 Ohm|1500 Ohm|
|Maximum Turn-On Time [msec]**(5)**|1/2 Cycle|1/2 Cycle|1/2 Cycle|
|Maximum Turn-Off Time [msec]|1/2 Cycle|1/2 Cycle|1/2 Cycle|



## **GENERAL SPECIFICATIONS[(1)]** 

|**Description**|**Parameters**|
|---|---|
|Dielectric Strength, Input/Output (50/60Hz)|4000 Vrms|
|Minimum Insulation Resistance (@ 500 VDC)|109Ohm|
|Maximum Capacitance, Input/Output|10 pF|
|Ambient Operating Temperature Range|-40 to 80°C|
|Ambient Storage Temperature Range|-40 to 125°C|
|Weight(typical)|3.0 oz(86.5g)|
|Encapsulation|Thermally Conductive Epoxy|
|Terminals|.25"Fastons, .025"Square Pins|



## **GENERAL NOTES** 

**(1)** 

**(2)** For option (-10) models the Transient overvoltage is 1100Vac. 

**(3)** Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

**(4)** Heat sinking required, for derating curves see next page. 

**(5)** Turn-on time for random turn-on (-10) versions is 0.1 msec 

## **MECHANICAL SPECIFICATIONS** 

Tolerances: ±0.02 in / 0.5 mm 

All dimensions are in: inches [millimeters] 

**==> picture [462 x 221] intentionally omitted <==**

**----- Start of picture text -----**<br>
120/240V MODEL 480V MODEL<br>MOUNTINGHOLE/SLOT0.192 (4.9) DIA. (29.7)(25.4)1.171.00 (3.8).15 FASTONTERMINAL.250 X .032(4 PLACES) .250 x .032 FASTONTERMINAL(4 PLACES) MOUNTING HOLE/SLOT.0192 (4.9) DIA.2 PLC’S<br>NL ito<br>.55<br>[She a 4 Ct Ld  |<br>(14.0)<br>le  a wy, ) | fh| i Be5 o<br>1.87 1.60<br>2.30 1.87 crydom 2.30 crydom (47.5) (40.6)<br>(58.4) (47.5) (58.4)<br>.59<br>| eeet3 | P oree l | compe gone. | |<br>(15.0)<br>PIN .025 SQ. Zor e e e<br>.100 CENTERS4 PLACES | (11.4).45 | | Le (21.6).85 — (19.6).77 .187 x .032FASTON | (21.6).85 -<br>1.80 TERMINAL 1.31<br>(45.7) 1.37 (4 PLACES) (33.2)<br>(34.8)<br>1.31<br>(33.2)<br>1.80<br>(45.7)<br>**----- End of picture text -----**<br>


**Do not forget to visit us at:** _**www.crydom.com**_ 

Copyright © 2018 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **WIRING DIAGRAM** 

**==> picture [480 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
LOAD B<br>480Vrms 480Vrms<br>A2 B1 LOAD B LOAD A<br>120/240Vrms 120/240Vrms<br>LOAD A A1 B2<br>A1 A2 B1 B2<br>240V Model<br>480V Model<br>- B CONTROL<br>+ B CONTROL<br>- A CONTROL - A CONTROL + B CONTROL<br>+ A CONTROL + A CONTROL - B CONTROL<br>**----- End of picture text -----**<br>


## **THERMAL DERATE INFORMATION** 

**DERATE CURVE: 25 AMP Dual SSR** 

**==> picture [214 x 199] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.5 ºC/W<br>1.0 ºC/W<br>2.0 ºC/W<br>5.0 ºC/W<br>50 wocccccosy<br>see,<br>40 vo, Sen, =. — ~ eee cs. meee, es. oars<br>atl ‘=, se en<br>30 ~~ens7~ see i=, a valPor‘~, se. See, teea se.<br>_— at ~ ‘~ . c.<br>_—= ‘—, ir<br>20 es:_— _— . =<br>=<br>_—— =<br>10<br>0<br>20 30 40 50 60 70 80<br>Ambient Temperature (ºC)<br>Combined Channel Output Current (Amps)<br>**----- End of picture text -----**<br>


**DERATING CURVE: 40 A Dual SSR** 

**==> picture [214 x 188] intentionally omitted <==**

**----- Start of picture text -----**<br>
80<br>aSe. ee.. es.es=.<br>70 sey<br>eee<br>60 ~~, =, S. Sse Ss. el ~,Sey<br>50 ee + me aSs.<br>— “ae, sPoe<br>40 Sy—— ~~= J =~. Se,~~; a. bry See me<br>30 _— = ae ~ ‘~, =. Sen<br>— = —, 7 -, =)<br>_— =_——<br>20 —~<br>10<br>0<br>20 30 40 50 60 70 80<br>Ambient Temperature (ºC)<br>Combined Channel Output Current (Amps)<br>**----- End of picture text -----**<br>


0.5 ºC/W 1.0 ºC/W 1.5 ºC/W 2.0 ºC/W 

## **AGENCY APPROVALS** 

## **Agency Approvals** 

Designed in accordance with the requirements of IEC 62314 E116949 (except 15-32VDC control) LR81689 (240 V, 4-15VDC control only) TAX # 5902 UG C E Aus 

Rev. 020618 ECN#20400 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2018 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /** 危险 

|**HAZARD OF**<br>**ELECTRIC**<br>**SHOCK,**<br>**EXPLOSION,**<br>**OR ARC FLASH.**<br>• Disconnect all<br>power before<br>installing or<br>working with<br>this equipment.<br>• Verify all<br>connections<br>and replace all<br>covers before<br>turning on<br>power.<br>**Failure to follow**<br>**these**<br>**instructions will**<br>**result in death**<br>**or serious injury.**|**RIESGO DE**<br>**DESCARGA**<br>**ELECTRICA O**<br>**EXPLOSION.**<br>• Desconectar<br>todos los<br>suministros de<br>energia a este<br>equipo antes<br>de trabajar<br>con este equipo.<br>• Verificar todas<br>las conexiones<br>y colocar todas<br>las tapas antes<br>de energizer<br>el equipo.<br>**El**<br>**incumplimiento**<br>**de estas**<br>**instrucciones**<br>**puede provocar**<br>**la muerte o**<br>**lesiones serias.**|**RISQUE DE**<br>**DESCHARGE**<br>**ELECTRIQUE**<br>**OU EXPLOSION**<br>• Eteindre<br>toutes les<br>sources<br>d'énergie de<br>cet appareil<br>avant de<br>travailler<br>dessus de cet<br>appareil<br>• Vérifier tous<br>connections, et<br>remettre tous<br>couverts en<br>olace avant de<br>mettre sous<br>**De non-suivi de**<br>**ces instructions**<br>**provoquera la**<br>**mort ou des**<br>**lésions sérieuses**<br>**sérieuses.**|**GEFAHR EINES**<br>**ELEKTRISCHE**<br>**N SCHLAGES**<br>**ODER EINER**<br>**EXPLOSION.**<br>• Stellen Sie<br>jeglichen<br>Strom ab, der<br>dieses Gerät<br>versorgt, bevor<br>Sie an dem<br>Gerät Arbeiten<br>durchführen<br>• Vor dem<br>Drehen auf<br>Energie alle<br>Anschlüsse<br>überprüfen<br>und alle<br>Abdeckungen<br>ersetzen.<br>**Unterlassung**<br>**dieser**<br>**Anweisungen**<br>**können zum**<br>**Tode oder zu**<br>**schweren**<br>**Verletzungen**<br>**führen.**|**RISCHIO DI**<br>**SCOSSA**<br>**ELETTRICA O**<br>**DELL’ESPLOSIONE.**<br>• Spenga tutta<br>l'alimentazione<br>che fornisce<br>questa<br>apparecchiatura<br>prima di lavorare<br>a questa<br>apparecchiatura<br>• Verificare tutti<br>i collegamenti<br>e sostituire<br>tutte le coperture<br>prima<br>dell’accensione<br>**L'omissione di**<br>**queste istruzioni**<br>**provocherà la**<br>**morte o**<br>**lesioni serie**|存在电击、<br>爆炸或电弧<br>闪烁危险<br>• 在操作此设<br>备之前请先<br>关闭电源。<br>若不遵守这些说明，<br>可能会导致严重的<br>人身伤害甚至死亡。|
|---|---|---|---|---|---|



## **WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /** 警告 

|**WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /**警告|**WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /**警告|**WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /**警告|
|---|---|---|
|**RISK OF MATERIAL DAMAGE AND HOT**<br>**ENCLOSURE**<br>**•**The product's side panels may be hot, allow<br>the product to cool before touching.<br>**•**Follow proper mounting instructions including<br>torque values.<br>**•**Do not allow liquids or foreign objects to enter<br>this product.<br>**Failure to follow these instructions can result in**<br>**serious injury, or equipment damage.**|**RISQUE DE DOMMAGE MATERIEL ET DE**<br>**SURCHAUFFE DU BOITIER**<br>**•**Les panneaux latéraux du produit peuvent être<br>chauds. Laisser le produit refroidir avant de le<br>toucher.<br>**•**Respecter les consignes de montage, et<br>notamment les couples de serrage.<br>**•**Ne pas laisser pénétrer de liquide ni de corps<br>étrangers à l'intérieur du produit.<br>**Le non-respect de cette directive peut entraîner,**<br>**des lésions corporelles graves ou des**<br>**dommages matériels.**|**Die Nichtbeachtung dieser Anweisung kann**<br>**Körperverletzung oder Materialschäden**<br>**zur Folge haben.**<br>**GEFAHR VON MATERIALSCHÄDEN UND**<br>**GEHÄUSEERHITZUNG**<br>**•**Die Seitenwände können heiß sein. Lassen Sie<br>das Produkt abkühlen, bevor Sie es berühren.<br>**•**Beachten Sie die Montageanweisungen,<br>**•**Führen Sie keine Flüssigkeiten oder<br>Fremdkörper in das Produkt ein.|
|**Si no se respetan estas precauciones pueden**<br>**producirse graves lesiones, daños materiales.**<br>**RIESGO DE DAÑOS MATERIALES Y DE**<br>**SOBRECALENTAMIENTO DE LA UNIDAD**<br>**•**Los paneles laterales del producto pueden<br>estar calientes. Esperar que el producto se<br>enfríe antes de tocarlo.<br>**•**Respetar las instrucciones de montaje, y en<br>particular los pares de apretado.<br>**•**No dejar que penetren líquidos o cuerpos<br>extraños en el producto.|**La mancata osservanza di questa precauzione può**<br>**causare gravi rischi per l'incolumità personale o**<br>**danni alle apparecchiature.**<br>**RISCHIO DI DANNI MATERIALI E D'INVOLUCRO**<br>**CALDO**<br>**•**I pannelli laterali dell'apparecchio possono<br>scottare; lasciar quindi raffreddare il prodotto<br>prima di toccarlo.<br>**•**Seguire le istruzioni di montaggio corrette.<br>**•**Non far entrare liquidi o oggetti estranei in questo<br>apparecchio.|如不能正确执行这些操作说明，<br>极有可能造成严重人体伤害或者设备的损坏。<br>材料损坏和高温外壳的危险性<br>•产品的一侧面板可能很热，在其冷却前请<br>不要触碰。<br>•遵照正确的安装说明，包括扭矩值。<br>•请勿让液体及其他异物进入本产品。|



**Do not forget to visit us at:** _**www.crydom.com**_ 

Copyright © 2018 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **ANNEX - ENVIRONMENTAL INFORMATION** 

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. 

|Part<br>Name|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|
|---|---|---|---|---|---|---|
||Lead<br>(Pb)|Mercury<br>(Hg)|Cadmium<br>(Cd)|Hexavalent<br>Chromium<br>(Cr (VI))|Polybrominated<br>biphenyls<br>(PBB)|Polybrominated<br>diphenyl ethers<br>(PBDE)|
|Semiconductor die|||||||
|Solder|||||||



## 附件 - 环保信息 

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 

|件<br>部<br>名称|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|
|---|---|---|---|---|---|---|
||铅<br>(Pb)|汞<br>(Hg)|镉<br>(Cd)|六价铬<br>(Cr (VI))|多溴联苯<br>(PBB)|多溴二苯醚<br>(PBDE)|
|半导体芯片|||||||
|焊接点|||||||
|50|||||||



**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2018 Crydom Inc. Specifications subject to change without notice.