D1D20L

_Datasheet_ **Panel Mount** 

## _**1-DCL Series**_ 

- Ratings from 7 A to 40 A @ 200 VDC and from 7 A to 10 A @ 500VDC 

- Mosfet Output 

   - DC control 

   - EMC Compliant to Level 3 

   - Epoxy Free Design 

- UL Approved, CE Compliant to EN60950-1 

- Improved SEMS screw and washer 

- Redesigned housing with anti-rotation barriers 

For **Generation 3** datasheet click here 

## **PRODUCT SELECTION** 

|**Load Voltage**|**7 A**|**10 A**|**12 A**|**20 A**|**40 A**|
|---|---|---|---|---|---|
|100 VDC|D1D07L||D1D12L|D1D20L|D1D40L|
|200 VDC|D2D07L||D2D12L||D2D40L|
|400 VDC|D4D07L||D4D12L|||
|500 VDC|D5D07L|D5D10L||||



## **AVAILABLE OPTIONS** 

**Operating Voltage Termination 1D:** 1-100 VDC **Blank:** Screws & clamps **2D:** 1-200 VDC **K:** Installed standoffs with **4D:** 1-400 VDC screws for PC Board **Series 5D:** 1-500 VDC mounting **(1)** 

## **Rated Load Current** 

**07:** 7 Amps 

**10:** 10 Amps (500 VDC only) 

**12:** 12 Amps (not for 500 VDC) @ Required for valid part number **20:** 20 Amps (100 VDC only) @ ***** For options only and not required for valid part numberNot all part number combinations are available. **40:** 40 Amps (100 & 200 VDC only) Contact Crydom Technical Support for information on the availability of a specific part number. 

## **OUTPUT SPECIFICATIONS[(2)]** 

|**Description**|**7 A**|**12 A**|**20 A**|**40 A**|**7 A**|**12 A**|**40 A**|**7 A**|**12 A**|**7 A**|**10 A**|
|---|---|---|---|---|---|---|---|---|---|---|---|
|Recommended Operating Voltage  [Vdc]|1-72|1-72|1-72|1-72|1-150|1-150|1-150|1-300|1-300|1-385|1-385|
|Absolute Maximum Rating [Vdc]|100|100|100|100|200|200|200|400|400|500|500|
|Maximum Off-State Leakage Current @ Rated Voltage [mA]|0.1|0.2|0.3|0.3|0.1|0.3|0.3|0.3|0.3|0.2|0.3|
|Maximum Load Current [Adc]**(3)**|7|12|20|40|7|12|40|7|12|7|10|
|Minimum Load Current [mA]**(4)**|1|1|1|1|1|1|1|1|1|1|1|
|Maximum Surge Current (10msec) [Adc]|23|28|42|106|22|31|106|18|36|19|29|
|Maximum On-State Voltage Drop @ Rated Current [Vdc]|0.5|0.9|0.8|1|1.5|0.7|0.8|2.3|2.6|3.5|3.3|
|Maximum On-State Resistance [RDS-ON] [Ohms]|0.07|0.072|0.039|0.025|0.21|0.062|0.021|0.33|0.22|0.5|0.33|
|Thermal Resistance Junction to Case (Rjc) [°C/W]|2|2|1.71|0.68|1.24|0.71|0.22|0.56|0.39|0.6|0.43|
|Minimum Heat Sink for Rated Current @ 40°C [°C/W]|5|3|2|1|3|3|0.7|2|1|1|0.7|
|Maximum Pulse Width Modulation Frequency [Hz]**(5)**|5000|4000|3500|2500|3500|2000|950|1200|900|1100|900|



## **INPUT SPECIFICATIONS[(2)]** 

|**Description**|**DC Control**||
|---|---|---|
|Control Voltage Range|3.5-32 VDC||
|Maximum Reverse Voltage|-32 VDC||
|Minimum Turn-On Voltage**(6)**|3.5 VDC||
|Must Turn-Off Voltage|1 VDC||
|Minimum Input Current (for on-state)|10 mA||
|Maximum Input Current|15 mA||
|Nominal Input Impedance|Current Regulated||
|Maximum Turn-On Time  [µsec]|100||
|Maximum Turn-Off Time  [µsec]|100||
|||FDE-07-01 REV. A|



**Do not forget to visit us at:** _**www.crydom.com**_ 

Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

## **GENERAL SPECIFICATIONS[(2)]** 

|**Description**|**Parameters**|
|---|---|
|Dielectric Strength, Input/Output/Base (50/60Hz)|3750 Vrms|
|Minimum Insulation Resistance(@ 500 VDC)|109Ohms|
|Maximum Capacitance, Input/Output|8 pF|
|Ambient Operating Temperature Range**(7)**|-40 to 100°C|
|Ambient Storage Temperature Range|-40 to 125°C|
|Weight (typical)|2.66 oz (75.5 g)|
|Housing Material|UL94 V-0|
|Baseplate Material|Aluminum|
|Input Terminal Screw Torque Range (in-lb/Nm)|13-15 /1.5-1.7|
|Load Terminal Screw Torque Range (in-lb/Nm)|18-20 / 2-2.2|
|SSR Mounting Screw Torque Range (in-lb/Nm)|18-20 / 2-2.2|
|Input/Load Terminal Screw Torque Range (in-lb/Nm)**(1)**|w/”K”option 8-10 / 0.9-1.13|
|Input/Output Terminal Screw Thread Size|#6-32 UNC / #8-32 UNC|
|Humidity per IEC60068-2-78|93% non-condensing|
|MTBF (Mean Time Between Failures) at 40°C ambient temperature**(8)**|21,395,130 hours(2,441years)|
|MTBF (Mean Time Between Failures) at 60°C ambient temperature**(8)**|11,545,504 hours(1,317years)|



## **WIRING DIAGRAM** 

* Inductive loads must be diode suppresed. 

**==> picture [170 x 164] intentionally omitted <==**

**----- Start of picture text -----**<br>
+ + -<br>V Load * * Load V<br>- + +<br>1 OUTPUT +2 1 OUTPUT +2<br>S O L I D  S T AT E  R E L AY S O L I D  S T AT E  R E L AY<br>4 INPUT +3 4 INPUT +3<br>+ +<br>V V<br>- -<br>**----- End of picture text -----**<br>


**==> picture [229 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
Recommended Wire Sizes<br>Terminals Wire Size Wire Pull-Out<br>(Solid / Stranded) Strength (lbs)[N]<br>24 AWG (0.2 mm [2] ) / 0.2  [minimum] 10 [44.5]<br>Input<br>2 x 12 AWG (3.3 mm [2] ) / 3.3  [maximum] 90 [400]<br>20 AWG (0.5 mm [2] ) / 0.518  [minimum] 30 [133]<br>Output 2 x 10 AWG (5.3 mm [2] ) / 5.3 110 [490]<br>2 x 8 AWG (8.4 mm [2] ) / 8.4  [maximum] 90 [400]<br>**----- End of picture text -----**<br>


## **EQUIVALENT CIRCUIT BLOCK DIAGRAMS** 

**==> picture [256 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
+DC 3 2 +DC<br>Control Trigger<br>Circuit Circuit<br>-DC 4 1 -DC<br>**----- End of picture text -----**<br>


**==> picture [195 x 120] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input Current vs Input Voltage<br>Standard Regulated “DC” Inputs<br>14<br>12<br>10<br>8<br>6<br>4<br>2<br>0<br>0 5 10 15 20 25 30 35<br>DC Input Voltage<br>Input Current (mA)<br>**----- End of picture text -----**<br>


**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

## **MECHANICAL SPECIFICATIONS[(2)]** 

Tolerances: ±0.02 in / 0.5 mm 

All dimensions are in: inches [millimeters] 

## **Screw Termination** 

**==> picture [149 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Hex Standoff Termination (“K” Option) (1)<br>**----- End of picture text -----**<br>


**==> picture [517 x 192] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.1 0.89 1.1 1.04<br>[27.9] Mounting  [22.6] [27.9] Mounting  [26.4]<br>0.49 Hole/Slot  0.49 Hole/Slot  (2 places)<br>[12.4] 0.19 [4.9] [12.4] 0.19 [4.9]<br>DIA. DIA.<br>1 OUTPUT +2 1 OUTPUT +2<br>1.88 S O L I D  S T AT E  R E L AY 1.7 2.25 1.88 S O L I D  S T AT E  R E L AY 1.7 2.25<br>[47.6] [43.2] [57.3] [47.6] [43.2] [57.3]<br>4 INPUT +3 4 INPUT +3<br>1.0  1.0  0.93<br>[25.4] [25.4] [23.6]<br>1.75 1.75 (4 places)<br>[44.5] [44.5] 1.0<br>[25.4]<br>(2 places)<br>**----- End of picture text -----**<br>


## **GENERAL NOTES** 

**(1)** Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm). 

- **(2)** 

- **(3)** Heat sinking required, see derating curves. 

- **(4)** Low current loads and high ambient temperature can affect turn-on time. 

- **(5)** 8VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current. 

- **(6)** Increase minimum voltage by 1V for operations from -20 to -40°C. 

- **(7)** Decrease maximum control voltage 1.35V/°C above 80°C ambient temperature. 

- **(8)** All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). 

## **SURGE CURRENT INFORMATION** 

Single Pulse (i) Duty Factor (10%) (ii) Duty Factor (20%) (ii) Duty Factor (50%) (ii) 

**==> picture [442 x 202] intentionally omitted <==**

**----- Start of picture text -----**<br>
D1D07L D1D12L<br>60 80<br>50 70<br>60<br>40<br>50<br>30 40<br>30<br>20<br>20<br>10<br>10<br>0 0<br>0.1 1 10 100 1000 0.1 1 10 100 1000<br>D1D20L D1D40L<br>100 300<br>80 250<br>200<br>60<br>150<br>40<br>100<br>20 50<br>0 0<br>0.1 1 10 100 1000 0.1 1 10 100 1000<br>Surge Duration (msec)<br>Surge Duration (msec)  Surge Duration (msec)<br>Surge Duration (msec)<br>Surge Current (Amp) Surge Current (Amp)<br>Surge Current (Amp) Surge Current (Amp)<br>**----- End of picture text -----**<br>


**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

**SURGE CURRENT INFORMATION** Single Pulse (i) Duty Factor (10%) (ii) Duty Factor (20%) (ii) Duty Factor (50%) (ii) 

**==> picture [493 x 501] intentionally omitted <==**

**----- Start of picture text -----**<br>
D2D07L D2D12L<br>50 70<br>60<br>40<br>50<br>30 40<br>20 30<br>20<br>10<br>10<br>0 0<br>0.1 1 10 100 1000 0.1 1 10 100 1000<br>D2D40L D4D07L<br>240 50<br>220<br>200 40<br>180<br>160<br>140 30<br>120<br>100 20<br>80<br>60 10<br>40<br>20<br>0 0<br>0.1 1 10 100 1000 0.1 1 10 100 1000<br>D4D12L D5D07L<br>70 40<br>60<br>30<br>50<br>40<br>20<br>30<br>20 10<br>10<br>0 0<br>0.1 1 10 100 1000 0.1 1 10 100 1000<br>D5D10L<br>70<br>60<br>50<br>40<br>30<br>20<br>10<br>0<br>0.1 1 10 100 1000<br>Period For Pulse Wide Modulation applications select<br>Duty Factor 10% the curve according duty factor and pulse duration as following.<br>Pulse Wide<br>Duty Factor 20% Duty Factor = x100 (%)<br>Period<br>Duty Factor 50%<br>Pulse<br>Wide (i) for Single Surge  Pulse  Tc=40°C ;Tj 175°C<br>(ii) for Repetitive  Surge Pulse  Tc=40°C ;Tj 130°C<br>Surge Duration (msec)  Surge Duration (msec)<br>Surge Duration (msec)  Surge Duration (msec)<br>Surge Duration (msec)  Surge Duration (msec)<br>Surge Duration (msec)<br>Surge Current (Amp) Surge Current (Amp)<br>Surge Current (Amp) Surge Current (Amp)<br>Surge Current (Amp) Surge Current (Amp)<br>Surge Current (Amp)<br>**----- End of picture text -----**<br>


**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

## **THERMAL DERATE INFORMATION** 

(iii) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. 

**==> picture [525 x 555] intentionally omitted <==**

**----- Start of picture text -----**<br>
D1D07L D1D12L D1D20L<br>5°C/W No Heat Sink(iii) 3°C/W 5°C/W No Heat Sink(iii) 2°C/W 3°C/W No Heat Sink(iii)<br>7 12 20<br>6<br>5 15<br>8<br>4<br>10<br>3<br>2 4<br>5<br>1<br>0 0 0<br>20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100<br>Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC)<br>D1D40L D2D07L D2D12L<br>1°C/W 3°C/W 5°C/W 3°C/W 5°C/W No Heat Sink(iii) 3°C/W 5°C/W No Heat Sink(iii)<br>40 7 12<br>6 10<br>30 5<br>8<br>4<br>20 6<br>3<br>4<br>10 2<br>1 2<br>0 0 0<br>20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100<br>Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC)<br>D2D40L D4D07L D4D12L<br>0.7°C/W 1.5°C/W 5°C/W 2°C/W 3°C/W No Heat Sink(iii) 1°C/W 2°C/W 5ºC/W<br>40 7 12<br>6 10<br>30 5<br>8<br>4<br>20 6<br>3<br>4<br>10 2<br>1 2<br>0 0 0<br>20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100<br>Ambient Temperature (ºC) Ambient Temperature (ºC) Ambient Temperature (ºC)<br>D5D07L D5D10L<br>1°C/W 3°C/W 5ºC/W 0.7°C/W 2°C/W 5°C/W<br>7 10<br>6<br>8<br>5<br>4 6<br>3 4<br>2<br>2<br>1<br>0 0<br>20 30 40 50 60 70 80 90 100 20 30 40 50 60 70 80 90 100<br>Ambient Temperature (ºC) Ambient Temperature (ºC)<br>Load Current (Amps) Load Current (Amps) Load Current (Amps)<br>Load Current (Amps) Load Current (Amps) Load Current (Amps)<br>Load Current (Amps) Load Current (Amps) Load Current (Amps)<br>Load Current (Amps) Load Current (Amps)<br>**----- End of picture text -----**<br>


**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

## **AGENCY APPROVALS** 

**Agency Approvals** EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3 Vibration Resistance: IEC 60068-2-6 : Amplitude Range 10-55 Hz, Displacement 0.75mm Shock Resistance: IEC 60068-2-27 : Peak Acceleration 15g, Duration11msec CALs E116950 CE A, 

## **ACCESORIES** 

_**New Accessories! Protective Cover & Hardware Kits**_ 

**==> picture [191 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Protective Cover<br>Part number: KS101<br>Clear plastic cover compatible with all new<br>S1 designs. Safety covers provide added<br>protection from electric shock when<br>installing or checking equipment.<br>**----- End of picture text -----**<br>


**==> picture [188 x 47] intentionally omitted <==**

**----- Start of picture text -----**<br>
Hardware Kit<br>Part number: HK4<br>Bag with 2 square brass accessories and 2<br>screw 8-32 x 5/8 for output. Used to mount<br>TMR1 lug terminals.<br>**----- End of picture text -----**<br>


## **Recommended Accessories** 

|**Cover**|**Hardware**<br>**Kit**<br>A|**Heat Sink**<br>**Part No.**<br>**Thermal Resistance**<br>**[ºC/W]**<br>~~©~~|**Heat Sink**<br>**Part No.**<br>**Thermal Resistance**<br>**[ºC/W]**<br>~~©~~|**Lug Terminal**|**Thermal Pad**<br><>|
|---|---|---|---|---|---|
|KS101|HK1<br>HK4|HS501DR<br>HS301 / HS301DR<br>HS251<br>HS201 / HS201DR<br>HS202 / HS202DR<br>HS172<br>HS151 / HS151DR<br>HS122 / HS122DR<br>HS103 / HS103DR<br>HS101<br>HS073<br>HS072<br>HS053<br>HS033<br>HS023|HS301 / HS301DR<br>HS201 / HS201DR<br>HS202 / HS202DR<br>HS151 / HS151DR<br>HS122 / HS122DR<br>HS103 / HS103DR<br>5.0<br>3.0<br>2.5<br>2.0<br>2.0<br>1.7<br>1.5<br>1.2<br>1.0<br>1.0<br>0.7<br>0.7<br>0.5<br>0.36<br>0.25|TRM1<br>TRM6|HSP-1<br>HSP-2|



Rev. 100520 ECN#20981 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

## **DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /** 危险 

- **GEFAHR EINES RISCHIO DI** 存在电击、 **ELEKTRISCHE SCOSSA** 爆炸或电弧 **N SCHLAGES ELETTRICA O** 闪烁危险 

- **OU EXPLOSION ODER EINER DELL’ESPLOSIONE.** Eteindre **EXPLOSION.** • Spenga tutta • 在操作此设 toutes les • Stellen Sie l'alimentazione 备之前请先 sources jeglichen che fornisce 关闭电源。 d'énergie de Strom ab, der questa cet appareil dieses Gerät apparecchiatura avant de versorgt, bevor prima di lavorare 若不遵守这些说明， travailler Sie an dem a questa 可能会导致严重的 dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 appareil durchführen 

**HAZARD OF RIESGO DE ELECTRIC DESCARGA SHOCK, ELECTRICA O EXPLOSION, EXPLOSION. OR ARC FLASH.** 

**RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION** 

   - Eteindre 

- Desconectar 

- • Disconnect all todos los power before suministros de installing or energia a este working with equipo antes this equipment. de trabajar con este equipo. 

- Verify all connections • Verificar todas and replace all las conexiones covers before y colocar todas turning on las tapas antes power. de energizer el equipo. 

• Vor dem • Verificare tutti Drehen auf i collegamenti e sostituire Energie alle Anschlüsse tutte le coperture prima überprüfen dell’accensione und alle Abdeckungen **L'omissione di** ersetzen. **queste istruzioni Unterlassung provocherà la dieser morte o Anweisungen lesioni serie können zum Tode oder zu schweren Verletzungen führen.** 

y colocar todas • Vérifier tous las tapas antes connections, et de energizer remettre tous el equipo. couverts en olace avant de **El** mettre sous **incumplimiento de estas De non-suivi de instrucciones ces instructions puede provocar provoquera la la muerte o mort ou des lesiones serias. lésions sérieuses** 

**Failure to follow these instructions will result in death or serious injury.** 

**De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses.** 

## **WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /** 警告 

## **RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE** 

- The product's side panels may be hot, allow 

- the product to cool before touching. 

- Follow proper mounting instructions including 

- torque values. 

- Do not allow liquids or foreign objects to enter 

- this product. 

**Failure to follow these instructions can result in serious injury, or equipment damage.** 

## **RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD** 

- Los paneles laterales del producto pueden 

- estar calientes. Esperar que el producto se enfríe antes de tocarlo. 

- Respetar las instrucciones de montaje, y en 

- particular los pares de apretado. 

- No dejar que penetren líquidos o cuerpos 

- extraños en el producto. 

**Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales.** 

## **RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER** 

**•** Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher. 

- Respecter les consignes de montage, et 

- notamment les couples de serrage. 

- Ne pas laisser pénétrer de liquide ni de corps 

- étrangers à l'intérieur du produit. 

**Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels.** 

## **RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO** 

- I pannelli laterali dell'apparecchio possono 

- scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. 

- Seguire le istruzioni di montaggio corrette. 

- Non far entrare liquidi o oggetti estranei in questo 

- apparecchio. 

**La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature.** 

## **GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG** 

- Die Seitenwände können heiß sein. Lassen Sie 

- das Produkt abkühlen, bevor Sie es berühren. 

- Beachten Sie die Montageanweisungen, 

- Führen Sie keine Flüssigkeiten oder 

- Fremdkörper in das Produkt ein. 

**Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben.** 

## 材料损坏和高温外壳的危险性 

- 产品的一侧面板可能很热，在其冷却前请 

- 不要触碰。 

- 遵照正确的安装说明，包括扭矩值。 

- 请勿让液体及其他异物进入本产品。 

如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

_Datasheet_ **Panel Mount** 

## **ANNEX - ENVIROMENTAL INFORMATION** 

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. 

|Part<br>Name|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|
|---|---|---|---|---|---|---|
||Lead<br>(Pb)|Mercury<br>(Hg)|Cadmium<br>(Cd)|Hexavalent<br>Chromium<br>(Cr (VI))|Polybrominated<br>biphenyls<br>(PBB)|Polybrominated<br>diphenyl ethers<br>(PBDE)|
|Semiconductor die|||||||
|Solder|||||||



## 附件 - 环保信息 

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 

|件<br>部<br>名称|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|
|---|---|---|---|---|---|---|
||铅<br>(Pb)|汞<br>(Hg)|镉<br>(Cd)|六价铬<br>(Cr (VI))|多溴联苯<br>(PBB)|多溴二苯醚<br>(PBDE)|
|半导体芯片|||||||
|焊接点|||||||
|50|||||||



**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice.