CU15-00
AC/DC PCB Mount Power Supply (PSU), ITE, 1 Output, 10 W, 3.3 VDC, 3 A
- Manufacturer: XP POWER
- Product type: AC / DC PCB Mount Power Supplies
- Depth: 48mm
- Width: 48mm
- Height: 23mm
- Product Range: CU Series
- No. of Outputs: 1 Output
- Output Power Max: 10W
- Input Voltage VAC: 85V AC to 264V AC
- Input Voltage AC Max: 264V
- Input Voltage AC Min: 85V
- Power Supply Approvals: ITE
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 3A
- Output Voltage - Output 1: 3.3VDC
| Delivery and price | |
|---|---|
| Units per pack | 20 |
| Price | 27.87 € |
| Current stock | 10+ |
| Lead time | 30 days |
**10-15 Watts** xppower.com ## **CU10-15 Series** - Low Cost - Small Size - PCB Mount - 15 Watt Medical Version - Single Output 3.3-24 V - Peak Load Capability - Non-standard Outputs Available ## ~~**Specification**~~ ## **Input** - Input Voltage • 85-264 VAC (120-370 VDC) Input Frequency • 47-63 Hz Input Current • 0.13 A rms at 230 VAC (CU10) 0.20 A rms at 230 VAC (CU15) - Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, cold start 25 ºC - Earth Leakage Current • Class 2 (no earth) Input Protection • 1A fuse (CU10) 2A fuse (CU15, CU15-M) ## **General** |**General**|| |---|---| |Efficiency|• See tables| |Isolation|• 3000 VAC Input to Output (CU10/15)| ||4000 VAC Input to Output (CU15-M)| |Switching Frequency|• 100 kHz typical for 10 W models| ||67 kHz typical for 15 W models| |Power Density|• 2.43 W/in3(CU10); 3.17 W/in3(CU15)| |MTBF|• >500 kHrs per MIL-HDBK-217F| ||(15 & 24 V units >400 kHrs)| ## **Environmental** ## **Output** Output Voltage • See table Output Voltage Trim • ±5% Initial Set Accuracy • ±1% Minimum Load • No minimum load required Start Up Delay • 1.5 s max Start Up Rise Time • 14 ms max Hold Up Time • 16 ms typical at full load and 115 VAC Drift • 0.6% Line Regulation • 0.5% max Load Regulation • 1.0% max 10% load to full load Transient Response • 4% max deviation, recovery to within 1% within 500 μ s for 25% load change Ripple & Noise • 1% max pk-pk (see note 1) Overvoltage Protection • 130-150% of Vnom, recycle input to reset Short Circuit Protection • Trip and restart (Hiccup mode) Temperature • 0.05%/ ˚ C Coefficient |**Environmental**|| |---|---| |Operating Temperature|• CU10/15: 0˚C to +65˚C, derate from| |Cooling<br>Operating Humidity<br>Storage Temperature<br>Operating Altitude<br>Vibration|full load at +45˚C to no load at +65˚C<br>CU15-M: 0˚C to +70˚C, derate from<br>full load at +50˚C to 50% load at +70˚C<br>• Convection-cooled<br>• 95% RH, non-condensing<br>• -20˚C to +85˚C<br>• 3000 m<br>• 10 Hz to 500 Hz, 2 g for 10 mins/cycle<br>60 min each cycle| ## **EMC & Safety** Emissions • CU15-M: EN55011 Level B conducted Others: FCC20780 Level B, EN55032 Class B conducted ESD Immunity • EN61000-4-2, level 3, Perf Criteria A Radiated Immunity • EN61000-4-3, level 3, Perf Criteria A EFT/Burst • EN61000-4-4, level 2, Perf Criteria A Surge • EN61000-4-5, level 3, Perf Criteria A Conducted Immunity • EN61000-4-6, 10 V, Perf Criteria A Dips & interruptions • EN61000-4-11, 30% 10 ms, 60% 1000 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals • CU15-M: EN60601, UL2601-1, CSA22.2 No. 601.1 per cUL Others: EN62368-1, UL62368-1 CE & UKCA meets all applicable directives & legislation. 1 **CU10-15** ## ~~**Models and Ratings**~~ |Output<br>Power|Output<br>Voltage(3)|Output<br>Voltage(3)|Nominal|Output Current|ut Current|Peak(2)|Efficiency<br>(typical)|Model<br>Number| |---|---|---|---|---|---|---|---|---| |8.25 W|3.3 VDC||2.50 A|||3.80 A|65%|CU10-00| ||5.0 VDC||2.00 A|||2.80 A|70%|CU10-10| ||9.0 VDC||1.12 A|||1.50 A|72%|CU10-09| |10 W|12.0 VDC||0.84 A|||1.20 A|75%|CU10-12| ||15.0 VDC||0.67 A|||1.00 A|75%|CU10-13| ||24.0 VDC||0.42 A|||0.65 A|78%|CU10-14| |||||||||| |Output<br>Power|Output<br>Voltage(3)||Nominal|Output Current|ut Current|Peak(2)|Efficiency<br>(typical)|Model<br>Number(4)| |10 W|3.3 VDC||3.00 A|||4.50 A|70%|CU15-00| ||5.0 VDC||3.00 A|||4.50 A|73%|CU15-10| ||9.0 VDC||1.67 A|||3.00 A|75%|CU15-09| |15 W|12.0 VDC||1.25 A|||1.80 A|80%|CU15-12| ||15.0 VDC||1.00 A|||1.50 A|80%|CU15-13| ||24.0 VDC||0.63 A|||0.95 A|82%|CU15-14| ## ~~**Notes**~~ _1. Measured at 20 MHz bandwidth. 3.3 V models are 50 mV maximum._ _2. Peak load lasting <30 s with a maximum duty cycle of 10%._ _3. Alternative output voltages available. Consult sales._ _4. Medical approved 15 W version available. Add suffix ‘-M’ to part number._ ## ~~**Mechanical Details**~~ ## CU10 models ## CU15/CU15-M models **==> picture [487 x 220] intentionally omitted <==** **----- Start of picture text -----**<br> 0.07 (1.78) 0.07 (1.78)<br>0.15 (3.8) 0.04 (1.02) 0.15 (3.8) **Note: CU15-M models 0.04 (1.02)<br>i a i height 0.99 (25.2) nt<br>me. bb ©) -Vo me -Vo<br>N<br>N<br>o ils CG o n aS<br>+Vo<br>+Vo<br>L<br>L<br>0.22 (5.5)<br>2.126 2.56 (65.02(54.0)) 0.157 (4.0) 2.441 (62.0)<br>2.75 (69.9)<br>' (HO Sly Hol k 4 So :<br>weight: 0.132 lb (60 g)<br>weight: 0.176 lb (80 g)<br>0.91 (23.0) 0.91 (23.0)**<br>1.77 (45.0)<br>0.491 (12.47) 1.89 (48.0)<br>0.492 (12.50)<br>1.28 (32.48)<br>0.885 (22.5) 0.196 (5.0) 1.398 (35.51)<br>0.945 (24.0) 0.157 (4.0)<br>**----- End of picture text -----**<br> ## ~~**Notes**~~ 1. All dimensions shown in inches (mm). 2. For mating connectors only, order part number CU20-60 CONKIT 23 June 2021
Updated at February 9, 2023
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →