CSTLS24M0X53-B0

P16E.pdf Oct.1,2018 

## Ceramic Resonators r (CERALOCK ) 

P16E.pdf Oct.1,2018 

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

!Note 

- This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

**==> picture [372 x 522] intentionally omitted <==**

## **EU RoHS Compliant** 

- All the products in this catalog comply with EU RoHS. 

- EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." 

- For more details, please refer to our web page, "Murata's Approach for EU RoHS" (https://www.murata.com/en-eu/support/ compliance/rohs). 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Contents** 

Product specifications are as of October 2018. 

CERALOCKr, CERALOCK(R) and "CERALOCK" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 

|Selection Guide|Selection Guide|p2|
|---|---|---|
|Part Numbering||p3|
|**1**|**MHz Chip Type -Tight Frequency**||
||**Tolerance for Automotive**|p4|
|**2**|**MHz Chip Type -Standard Frequency**||
||**Tolerance for Automotive**|p6|
||Notice for Automotive|p8|
||Packaging for Automotive|p11|
|**3**|**MHz Chip Type**||
||**-Tight Frequency Tolerance**||
||**for Consumer/Industrial Usage**|p13|
|**4**|**MHz Chip Type**||
||**-Standard Frequency Tolerance**||
||**for Consumer/Industrial Usage**|p15|
|**5**|**MHz Lead Type**||
||**-Standard Frequency Tolerance**||
||**for Consumer/Industrial Usage**|p17|
||Notice for Consumer/Industrial Usage||
||MHz Chip Type|p19|
||MHz Lead Type|p21|
||Packaging for Consumer/Industrial Usage||
||MHz Chip Type|p22|
||MHz Lead Type|p24|



Please check the MURATA website (https://www.murata.com/) if you cannot find a part number in this catalog. 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Selection Guide** 

**==> picture [444 x 273] intentionally omitted <==**

**----- Start of picture text -----**<br>
Automotive Consumer/Industrial<br>Tight Tolerance Standard Tolerance Tight Tolerance Standard Tolerance<br>SMD SMD SMD SMD<br>CSTNR_GH5C CSTCR_G_B CSTNR_GH5L CSTCR_G<br>4.00–7.99MHz i) 4.00–7.99MHz i 4.00–7.99MHz 7) 4.00–7.99MHz<br>CSTNE_G_A CSTNE_G<br>CSTNE_GH5C CSTNE_GH5L<br>8.00–13.99MHz ~ CSTCE_G_A mee 8.00–13.99MHz ~ CSTCE_G<br>8.00–13.99MHz 8.00–13.99MHz<br>CSTNE_V_C CSTNE_V<br>CSTNE_VH3C CSTNE_VH3L<br>14.00–20.00MHz st CSTCE_V_C as 14.00–20.00MHz La CSTCE_V<br>14.00–20.00MHz 14.00–20.00MHz<br>Leaded<br>**----- End of picture text -----**<br>


**CSTLS_G** 3.40–10.00MHz **CSTLS_X** 16.00–70.00MHz 

Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics, Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specification. 

2 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## o Part Numbering 

## CERALOCKr (MHz) 

**==> picture [229 x 185] intentionally omitted <==**

**----- Start of picture text -----**<br>
(Part Number) CS T NE 16M0 V 5 3 **** R0<br>1 2 3 4 5 6 7 8 9<br>1Product ID<br>Product ID<br>CS Ceramic Resonators<br>2Frequency/Capacitance<br>Code Frequency/Capacitance<br>T MHz with Built-in Capacitance<br>3Structure/Size<br>Code Structure/Size<br>LS Round Lead Type<br>CR/NR/CE/NE Small-cap Chip Type<br>**----- End of picture text -----**<br>


4Nominal Center Frequency 

Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter " **M** ." 

## 5Design 

|Code|Design|
|---|---|
|**G**|Thickness Shear mode|
|**V**|Thickness Expander mode|
|**X**|Thickness Expander mode (3rd overtone)|



## 7Load Capacity 

|Code|Load Capacity|
|---|---|
|**1**|5pF|
|**2**|10pF|
|**3**|15pF|
|**5**|33/39pF|
|**6**|47pF|



## 8Individual Specification 

|Code|Individual Specifcation|
|---|---|
|********|Four-digit alphanumerics express<br>"Individual Specifcation."|



With standard products, "8Individual Specification" and "9Packaging" is omitted. 

## 9Packaging 

|Code|Packaging|
|---|---|
|**B0**|Bulk|
|**A0**|Radial TapingH0=18mm|
|**R0**|Plastic Tapingø=180mm Reel|
|**R1**|Plastic Tapingø=330mm Reel|



������������������������������������������������������������������������� 

## 6Initial Frequency Tolerance 

|Code|Initial Frequency Tolerance|
|---|---|
|**5**|±0.5%|
|**3**|±0.3%|
|**2**|±0.2%|
|**H**|±0.07%|



3 

P16E.pdf Oct.1,2018 

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

!Note 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

**1** . 

## r Ceramic Resonators (CERALOCK ) 

## **MHz Chip Type -Tight Frequency Tolerance for Automotive** 

**==> picture [510 x 554] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.5±0.1<br>Chip type CERALOCKr with built-in load capacitors  *<br>provides high accuracy in an extremely small package.<br>0.2±0.2 0.6±0.05<br>MURATA's frequency adjustment and package technology  Ea 4.1 max. g<br>expertise has enabled the development of the chip<br>CERALOCKr with built-in load capacitors. 0.4 (Ref.) 0.4 (Ref.)<br>~~ ——<br>This diverse series owes its development to MURATA's 0.4 (Ref.)<br>original mass production techniques and high reliability, (3) (2) 0.4±0.1(1)<br>0.4±0.1 0.4±0.1 (1): Input<br>and has achieved importance in the worldwide automotive (2): GND<br>(3): Output<br>market.  CSTNR_GH5C : Frequency Marking<br>4.00-7.99MHz * : EIAJ Monthly Code<br>Features 0.75±0.1 1.5±0.1 1.5±0.1 (in mm)<br>1. High accuracy resonators whose total tolerance is  3.20±0.15<br>available for less than ±3,000ppm.<br>2. High reliability and available for a wide temperature range. *<br>3. Oscillation circuits do not require external load capacitors.<br>0.1±0.1 0.4±0.1<br>= 0<br>4. Available for a wide frequency range. 3.0 max.<br>5. Extremely small and have a low profile.<br>6. No adjustment is necessary for oscillation circuits. 0.50 (ref.) 0.50 (ref.)<br>_— 0.50 (ref.)<br>7. Stable supply is ensured due to not using precious metal<br>(3) (2) (1)<br>(Paradium) in built-in Capacitance. 0.4±0.1 0.4±0.1 0.4±0.1 (1): Input<br>(2): GND<br>(3): Output<br>CSTNE_GH5C : Frequency Marking<br>Applications 8.00-13.99MHz * : EIAJ Monthly Code<br>1. Cluster panel and Control panel 0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>2. Safety control<br>Anti-lock Brake System, Electronic Stability Control,  3.20±0.15<br>Airbag, etc. *<br>3. Engine ECU, Electronic Power Steering, Immobilizer, etc.<br>0.1±0.1 0.4±0.1<br>4. Car Air conditioner, Power Window,  Eg<br>Remote Keyless Entry system, etc. 3.0 max.<br>5. Intelligent Transportation System<br>ay 0.50 (ref.) a 0.50 (ref.)<br>Lane Keeping System, Millimeter wave radar, etc. 0.50 (ref.)<br>6. Battery control for hybrid cars (3) (2) (1)<br>0.4±0.1 0.4±0.1 0.4±0.1 (1): Input<br>ic (2): GND<br>(3): Output<br>CSTNE_VH3C : Frequency Marking<br>14.00-20.00MHz * : EIAJ Monthly Code<br>0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>Frequency Initial Frequency Shift by Temperature Operating<br>Part Number Frequency Tolerance Temperature Range<br>(MHz) (%) (%) (°C)<br>CSTNR_GH5C 4.00 to 7.99 ±0.07 ±0.13 -40 to 125<br>CSTNE_GH5C 8.00 to 13.99 ±0.07 ±0.13 -40 to 125<br>CSTNE_VH3C 14.00 to 20.00 ±0.07 ±0.13 -40 to 125<br>0.30±0.20 2.0±0.1 1.4 max.<br>1.1±0.1<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.70±0.10<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.90±0.10<br>**----- End of picture text -----**<br>


Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 

4 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Measuring Circuit of Oscillating Frequency** 

**==> picture [173 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
VDD<br>5pF<br>To Frequency Counter<br>Rf<br>1MΩ<br>Rd<br>(1) (3)<br>C1 C2<br>(2)<br>**----- End of picture text -----**<br>


## **Standard Land Pattern Dimensions** 

CSTNR_GH5C (* This Land Pattern is not common to CSTCR_G.) 

CSTNE_GH5C/CSTNE_VH3C 

**==> picture [165 x 98] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.4 1.1 0.4 1.1 0.4<br>1.5 1.5 Land Pattern<br>2.6<br>**----- End of picture text -----**<br>


**==> picture [133 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.4 0.8 0.4 0.8 0.4<br>1.2 1.2<br>Land Pattern<br>1.9<br>**----- End of picture text -----**<br>


(in mm) 

(in mm) 

## **Frequency Temperature Characteristics** 

**==> picture [495 x 351] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNR_GH5C CSTNE_GH5C<br>+0.2 +0.2<br>+0.1 +0.1<br>0 0<br>-0.1 -0.1<br>-0.2 -0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C) Temperature (°C)<br>CSTNE_VH3C<br>+0.2<br>+0.1<br>0<br>-0.1<br>-0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C)<br>Oscillating Frequency Shift (%) Oscillating Frequency Shift (%)<br>Oscillating Frequency Shift (%)<br>**----- End of picture text -----**<br>


5 

P16E.pdf Oct.1,2018 

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

!Note 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

**2** » 

## r Ceramic Resonators (CERALOCK ) **MHz Chip Type -Standard Frequency Tolerance for Automotive** 6 

**==> picture [510 x 555] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.5±0.1<br>Chip type CERALOCKr with built-in load capacitors<br>*<br>provides high accuracy in an extremely small package.<br>MURATA's frequency adjustment and package technology  0.2±0.2(3) (2) (1) 0.4±0.05<br>expertise has enabled the development of the chip  4.1 max.<br>CERALOCKr with built-in load capacitors. Ea @<br>This diverse series owes its development to MURATA's 0.4 (Ref.0.8±0.1) 0.4 (Ref.0.8±0.1) 0.4 (Ref.0.8±0.1)<br>original mass production techniques and high reliability,<br>(1): Input<br>and has achieved importance in the worldwide automotive  (2): GND(3): Output<br>market. CSTCR_G_B : Frequency Marking<br>4.00-7.99MHz 0.4±0.1 0.4±0.1 0.4±0.1* : EIAJ Monthly Code<br>0.75±0.1 1.5±0.1 1.5±0.1<br>Features (in mm)<br>1. High reliability and available for a wide temperature range. 3.20±0.15<br>2. Oscillation circuits do not require external load capacitors.<br>3. Available for a wide frequency range. *<br>4. Extremely small and have a low profile. 0.1±0.1 0.4±0.1<br>= 0<br>5. No adjustment is necessary for oscillation circuits. 3.0 max.<br>Applications 0.50 (ref.) 0.50 (ref.)<br>0.50 (ref.)<br>1. Cluster panel and Control panel 0.4±0.1(3) 0.4±0.1(2) 0.4±0.1(1) (1): Input<br>2. Safety control  (2): GND(3): Output<br>Anti-lock Brake System, Electronic Stability Control,  8.00-13.99MHzCSTNE_G_A * : EIAJ Monthly Code: Frequency Marking<br>Airbag, etc.<br>3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>4. Car Air conditioner, Power Window,<br>3.20±0.15<br>Remote Keyless Entry system, etc.<br>5. Electronic Toll Collection system, Car Navigation, etc. *<br>0.1±0.1 0.4±0.1<br>=a 1<br>3.0 max.<br>S 0.50 (ref.) 1 0.50 (ref.)<br>0.50 (ref.)<br>(3) (2) (1)<br>0.4±0.1 0.4±0.1 0.4±0.1 (1): Input<br>(2): GND<br>(3): Output<br>CSTNE_V_C : Frequency Marking<br>14.00-20.00MHz * : EIAJ Monthly Code<br>0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>Frequency Initial Frequency Shift by Temperature Operating<br>Part Number Frequency Tolerance Temperature Range<br>(MHz) (%) (%) (°C)<br>CSTCR_G_B 4.00 to 7.99 ±0.50 ±0.15 -40 to 125<br>CSTNE_G_A 8.00 to 13.99 ±0.50 ±0.20 -40 to 125<br>CSTNE_V_C 14.00 to 20.00 ±0.50 ±0.15 -40 to 125<br>0.3±0.2 2.0±0.1 1.4 max.<br>1.15±0.05<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.70±0.10<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.90±0.10<br>**----- End of picture text -----**<br>


Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 

6 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Measuring Circuit of Oscillating Frequency** 

**==> picture [173 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNE_G_A/CSTNE_V_C/CSTCR_G_B<br>VDD<br>5pF<br>To Frequency Counter<br>Rf<br>1MΩ<br>Rd<br>(1) (3)<br>C1 C2<br>(2)<br>**----- End of picture text -----**<br>


## **Standard Land Pattern Dimensions** 

**==> picture [115 x 141] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G_B<br>0.8 0.7 0.8 0.7 0.8<br>0.4 0.4 0.4<br>1.5 1.5<br>Land Pattern<br>(in mm)<br>2.6 1.6<br>**----- End of picture text -----**<br>


**==> picture [86 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNE_G_A/CSTNE_V_C<br>**----- End of picture text -----**<br>


**==> picture [133 x 82] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.4 0.8 0.4 0.8 0.4<br>1.2 1.2<br>Land Pattern<br>1.9<br>**----- End of picture text -----**<br>


**==> picture [23 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
(in mm)<br>**----- End of picture text -----**<br>


## **Frequency Temperature Characteristics** 

**==> picture [495 x 343] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G_B CSTNE_G_A<br>+0.2 +0.2<br>+0.1 +0.1<br>0 0<br>-0.1 -0.1<br>-0.2 -0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C) Temperature (°C)<br>CSTNE_V_C<br>+0.2<br>+0.1<br>0<br>-0.1<br>-0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C)<br>Oscillating Frequency Shift (%) Oscillating Frequency Shift (%)<br>Oscillating Frequency Shift (%)<br>**----- End of picture text -----**<br>


7 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Notice for Automotive** 

## **Soldering and Mounting (CSTCR_G_B/CSTNR_GH5C, CSTNE_G_A/GH5C, CSTNE_V_C/VH3C Series)** 

## 1. Soldering 

## (1) Reflow soldering 

Please mount the component on a circuit board by reflow soldering. Flow soldering is not acceptable. 

## Recommendable Flux and Solder 

|**Flux**|Please use rosin based fux,<br>not water soluble fux.|
|---|---|
|**Solder**|Please use solder (Sn-3.0Ag-0.5Cu) under<br>the following conditions: Standard thickness<br>of soldering paste: 0.10 to 0.15mm.|



## Recommendable Soldering Profile 

|**Pre-heating**|150 to 180°C<br>60 to 120s|
|---|---|
|**Heating**|220°C min.<br>30 to 60s|
|**Peak Temperature**|upper limit: 260°C<br>lower limit: 245°C<br>1s max.<br>5s max.|



Temperature shall be measured on the surface of component. 

**==> picture [242 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
Peak<br>260<br>245<br>220 Heating<br>180 (220°C min.)<br>150<br>Pre-heating<br>(150 to 180°C) Gradual<br>Cooling<br>60 to 120s  30 to 60s<br>Temperature (°C)<br>**----- End of picture text -----**<br>


## (2) Soldering with Iron 

If compelled to mount the component by using a soldering iron, please do not directly touch the component with the  soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. 

Recommendable Soldering with Iron 

|**Heating of the soldering iron**|350°C max.|
|---|---|
|**Watt**|30W max.|
|**Shape of the soldering iron**|ø3mm max.|
|**Soldering Time**|5s max. at one terminal|
|**Solder**|Sn-3.0Ag-0.5Cu|



## (3) Solder Volume 

Please make the solder volume less than the height of the substrate to avoid damage to the seal between the metal cap and the substrate. 

## (4) Other 

Do not reuse components removed from a circuit board after soldering. 

## (5) Conditions for Placement Machines 

The component is recommended with placement machines that employ optical placement capabilities. The component may be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. 

Continued on the following page. 

8 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Notice for Automotive** 

Continued from the preceding page. 

## 2. Wash 

## (1) Cleaning Solvents 

HCFC, Isopropanol, Tap water, Demineralized water, 

Cleanthrough750H, Pine alpha 100S, Techno care FRW 

## (2) Temperature Difference : dT *1 

dT=[<] 60°C (dT=Component-solvent) 

- *1 ex. If the component is immersed at +90°C into cleaning solvent at +60°C, then dT=30°C. 

## (3) Conditions 

- (a) Ultrasonic Wash 

   - 1 minute max. in above solvent at +60°C max. 

   - (Frequency: 28kHz, Output: 20W/l) 

## (b) Immersion Wash 

   - 5 minutes max. in above solvent at +60°C max. 

- (c) Shower or Rinse Wash 

   - 5 minutes max. in above solvent at +60°C max. 

## (4) Drying 

- 5 minutes max. by blowing air at +80°C max. 

## (5) Other 

- (a) Total washing time should be within 10 minutes. 

- (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 

## 3. Coating 

Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm stable electrical characteristics are maintained. 

Continued on the following page. 

9 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Notice for Automotive** 

Continued from the preceding page. 

## **Storage and Operating Conditions** 

1. Product Storage Conditions 

- Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: 

- Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 

2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 

3. Notice on Product Storage 

- (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. 

- (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. 

- (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. 

- (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under poor conditions. 

- (5) Please do not drop the products to avoid cracking of ceramic elements. 

4. Other 

- Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. 

- Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. 

## **Rating** 

The component may be damaged if excessive mechanical stress is applied. 

## **Handling** 

"CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 

10 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Packaging for Automotive** 

## **Minimum Quantity** 

|Part Number|Plastic Tape ø180mm|Plastic Tape ø330mm|Bulk|Reel Dimensions|
|---|---|---|---|---|
|**CSTCR_G_B**|3,000|9,000|500|a|
|**CSTNR_GH5C**|3,000|9,000|500|a|
|**CSTNE_G_A**|3,000|9,000|500|b|
|**CSTNE_GH5C**|3,000|9,000|500|b|
|**CSTNE_V_C**|3,000|9,000|500|b|
|**CSTNE_VH3C**|3,000|9,000|500|b|



The order quantity should be an integral multiple of the "Minimum Quantity" shown above. 

**==> picture [18 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
(pcs.)<br>**----- End of picture text -----**<br>


## **Dimensions of Reel** 

**==> picture [448 x 145] intentionally omitted <==**

**----- Start of picture text -----**<br>
a b<br>Trailer Leader<br>160-190 Cover Film 160Trailer-190 LeaderCover Film<br>Empty Components Empty Empty Components Empty<br>160 min. 160 min.<br>400-560 400-560<br>ø13.0±0.22.0±0.5 ø13.0±0.2 2.0±0.5<br>13.0 [+1.0]   0 9.0+1.0  0<br>17.0±1.0 13.0±1.0<br>)1.5<br>0ø180       (– 0(ø180       )–1.5<br>**----- End of picture text -----**<br>


**==> picture [25 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
(in mm)<br>**----- End of picture text -----**<br>


## **Dimensions of Taping** 

**==> picture [236 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNR_GH5C<br>4.0±0.1<br>2.0±0.05 ø1.5 [+0.1] -0<br>4.0±0.1 ø1.5±0.1<br>2.2±0.1<br>Cover film peel strength force 0.1 to 0.7N<br>(5°)<br>Cover film peel speed 300mm/min. Cover Film<br>10°<br>Direction of Feed (in mm)<br>CSTNE_VH3C<br>Dimensions of Carrier Tape<br>4.0±0.1<br>2.0±0.05 ø1.5 [+0.1] -0.0<br>4.0±0.1 ø1.0 [+0.2] -0.0<br>+0.10<br>Cover film peel strength force 0.1 to 0.7N 1.50 -0.05<br>Cover film peel speed 300mm/min. Cover Film (5°)<br>10°<br>Direction of Feed (in mm)<br>1.75±0.1<br>)<br>5.5±0.05<br>9.5( (3)(2)(1) 4.7±0.1 12.0±0.2<br>0.25±0.05 1.25±0.1 1.85 max.)(<br>1.75±0.1<br>(5.2) (2)(3)(1) +0.103.40-0.05 3.5±0.05 8.0±0.2<br>0.25±0.05 1.10±0.10 1.40 max.)(<br>**----- End of picture text -----**<br>


**==> picture [236 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNE_GH5C<br>+0.1<br>4.0±0.1 ø1.5 -0.0<br>2.0±0.05<br>4.0±0.1 +0.2<br>ø1.0 -0.0 +0.10<br>Cover film peel strength force 0.1 to 0.7N  1.50 -0.05<br>Cover film peel speed 300mm/min. (7˚)<br>Cover Film<br>10°<br>Direction of Feed (in mm)<br>1.75±0.1<br>)<br>+0.10 0.05 3.5±0.05<br>5.2( (3)(2)(1) 3.40 - 8.0±0.2<br>0.25±0.05 0.90±0.10 (1.30 max.)<br>**----- End of picture text -----**<br>


Continued on the following page. 

11 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Packaging for Automotive** 

Continued from the preceding page. 

## **Dimensions of Taping** 

**==> picture [505 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G_B CSTNE_G_A<br>4.0±0.1 +0.1<br>2.0±0.05 ø1.5 [+0.1] -0 4.0±0.1 2.0±0.05 ø1.5 -0.0<br>4.0±0.1 ø1.5 [+0.1] -0 4.0±0.1 ø1.0 -0.0+0.2 +0.10<br>2.2±0.1 Cover film peel strength force 0.1 to 0.7N  1.50 -0.05<br>Cover film peel strength force 0.1 to 0.7N<br>Cover film peel speed 300mm/min. Cover Film (3°) Cover film peel speed 300mm/min. Cover Film (7˚)<br>10°<br>10°<br>Direction of Feed (in mm) Direction of Feed (in mm)<br>CSTNE_V_C<br>Dimensions of Carrier Tape<br>4.0±0.1<br>2.0±0.05 ø1.5 [+0.1] -0.0<br>4.0±0.1 ø1.0 [+0.2] -0.0<br>+0.10<br>Cover film peel strength force 0.1 to 0.7N 1.50 -0.05<br>Cover film peel speed 300mm/min. Cover Film (5°)<br>10°<br>Direction of Feed (in mm)<br>1.75±0.1 1.75±0.1<br>) 5.5±0.05 ) +0.10 0.05 3.5±0.05<br>9.5( (3)(2)(1) 4.7±0.1 12.0±0.2 5.2( (3)(2)(1) 3.40 - 8.0±0.2<br>0.3±0.05 1.25±0.05 1.85 max.)( 0.25±0.05 0.90±0.10 (1.30 max.)<br>1.75±0.1<br>(5.2) (2)(3)(1) +0.103.40-0.05 3.5±0.05 8.0±0.2<br>0.25±0.05 1.10±0.10 1.40 max.)(<br>**----- End of picture text -----**<br>


12 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## r Ceramic Resonators (CERALOCK ) **MHz Chip Type -Tight Frequency Tolerance for Consumer/Industrial Usage** 6 

**==> picture [510 x 554] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.5±0.1<br>Chip type CERALOCKr with built-in load capacitors *<br>provides high accuracy in an extremely small package.<br>0.2±0.2 0.6±0.05<br>MURATA's frequency adjustment and packaging technology  =n 4.1 max.<br>expertise has enabled the development of the chip<br>CERALOCKr with built-in load capacitors. 0.4 (Ref.) 0.4 (Ref.)<br>e 1<br>High-density mounting is made possible by the small  Fe 0.4 (Ref.)<br>package and the elimination of the need for an external (3) (2) 0.4±0.1(1)<br>0.4±0.1 0.4±0.1 (1): Input<br>load capacitor. (2): GND<br>(3): Output<br>CSTNR_GH5L : Frequency Marking<br>4.00-7.99MHz * : EIAJ Monthly Code<br>Features<br>0.75±0.1 1.5±0.1 1.5±0.1 (in mm)<br>1. Oscillation circuits do not require external load capacitors.<br>2. Available for a wide frequency range. 3.20±0.15<br>3. Extremely small and have a low profile.<br>4. No adjustment is necessary for oscillation circuits. *<br>5. Stable supply is ensured due to not using precious metal<br>0.1±0.1 0.4±0.1<br>= ¢<br>(Paradium) in built-in Capacitance. 3.0 max.<br>Applications 0.50 (ref.) 0.50 (ref.)<br>0.50 (ref.)<br>1. Clock oscillators for USB (full-speed) controller ICs 0.4±0.1(3) 0.4±0.1(2) 0.4±0.1(1) (1): Input<br>2. Audio equipment and musical instruments, etc. (2): GND<br>(3): Output<br>3. Other applications for replacement of Crystal units/ CSTNE_GH5L : Frequency Marking<br>8.00-13.99MHz * : EIAJ Monthly Code<br>Oscillators<br>0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>3.20±0.15<br>*<br>0.1±0.1 0.4±0.1<br>=i q<br>3.0 max.<br>—~ 0.50 (ref.) Lo oo 0.50 (ref.)<br>0.50 (ref.)<br>(3) (2) (1)<br>0.4±0.1 0.4±0.1 0.4±0.1 (1): Input<br>(2): GND<br>(3): Output<br>CSTNE_VH3L : Frequency Marking<br>14.00-20.00MHz * : EIAJ Monthly Code<br>0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>Frequency Initial Frequency Shift by Temperature Operating<br>Part Number Frequency Tolerance Temperature Range<br>(MHz) (%) (%) (°C)<br>CSTNR_GH5L 4.00 to 7.99 ±0.07 ±0.11 -20 to 85<br>CSTNE_GH5L 8.00 to 13.99 ±0.07 ±0.11 -40 to 85<br>CSTNE_VH3L 14.00 to 20.00 ±0.07 ±0.11 -40 to 85<br>0.30±0.20 2.0±0.1 1.4 max.<br>1.1±0.1<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.70±0.10<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.90±0.10<br>**----- End of picture text -----**<br>


Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 

13 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Measuring Circuit of Oscillating Frequency** 

**==> picture [148 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNR_GH5L/CSTNE_GH5L/CSTNE_VH3L<br>**----- End of picture text -----**<br>


**==> picture [173 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
VDD<br>5pF<br>To Frequency Counter<br>Rf<br>1MΩ<br>Rd<br>(1) (3)<br>C1 C2<br>(2)<br>**----- End of picture text -----**<br>


## **Standard Land Pattern Dimensions** 

CSTNR_GH5L (* This Land Pattern is not common to CSTCR_G.) 

## CSTNE_GH5L/CSTNE_VH3L 

**==> picture [417 x 98] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.4 1.1 0.4 1.1 0.4<br>0.4 0.8 0.4 0.8 0.4<br>1.2 1.2<br>Land Pattern<br>1.5 1.5 Land Pattern<br>2.6 1.9<br>**----- End of picture text -----**<br>


**==> picture [23 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
(in mm)<br>**----- End of picture text -----**<br>


(in mm) 

## **Frequency Temperature Characteristics** 

**==> picture [495 x 342] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNR_GH5L CSTNE_GH5L<br>+0.2 +0.2<br>+0.1 +0.1<br>0 0<br>-0.1 -0.1<br>-0.2 -0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C) Temperature (°C)<br>CSTNE_VH3L<br>+0.2<br>+0.1<br>0<br>-0.1<br>-0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C)<br>Oscillating Frequency Shift (%) Oscillating Frequency Shift (%)<br>Oscillating Frequency Shift (%)<br>**----- End of picture text -----**<br>


14 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## r Ceramic Resonators (CERALOCK ) O **MHz Chip Type -Standard Frequency Tolerance for Consumer/Industrial Usage** O 

**==> picture [18 x 4] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.5±0.1<br>**----- End of picture text -----**<br>


**==> picture [510 x 552] intentionally omitted <==**

**----- Start of picture text -----**<br>
Chip type CERALOCKr with built-in load capacitors<br>*<br>provides an extremely small package.<br>MURATA's package technology expertise has enabled the  0.2±0.2(3) (2) (1) 0.4±0.05<br>development of the Chip CERALOCKr with built-in  Ea 4.1 max.<br>load capacitors.<br>High-density mounting can be realized because of the  0.4 (Ref.0.8±0.1) 0.4 (Ref.0.8±0.1) 0.4 (Ref.0.8±0.1)<br>small package and the elimination of the need for an<br>(1): Input<br>external load capacitor. (2): GND(3): Output<br>CSTCR_G : Frequency Marking<br>Features 4.00-7.99MHz 0.4±0.1 0.4±0.1 0.4±0.1* : EIAJ Monthly Code<br>0.75±0.1 1.5±0.1 1.5±0.1<br>(in mm)<br>1. Oscillation circuits do not require external load capacitors.<br>2. Available in a wide frequency range. 3.20±0.15<br>3. Extremely small and have a low profile.<br>4. No adjustment is necessary for oscillation circuits. *<br>0.1±0.1 0.4±0.1<br>[emit<br>Applications 3.0 max.<br>1. Clock oscillators for microprocessors<br>0.50 (ref.) 0.50 (ref.)<br>2. Small electronic equipment such as handheld phone,  0.50 (ref.)<br>= — * || -F —<br>digital video camcorder (DVC), digital still camera (DSC),  0.4±0.1(3) 0.4±0.1(2) 0.4±0.1(1) (1): Input<br>portable audio player, etc. (2): GND(3): Output<br>3. Storage media and memory (HDD, Optical storage device,  8.00-13.99MHzCSTNE_G * : EIAJ Monthly Code: Frequency Marking<br>FDD, Flash memory card, etc.)<br>4. Office automation equipment (Mobile PC, Mouse,  0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>Keyboard, etc.)<br>3.20±0.15<br>5. Audio-visual applications (TV, DVD-HDD recorder, Audio<br>equipment, Remote control, etc.) *<br>6. Home appliances (Air conditioner, Microwave oven,<br>0.1±0.1 0.4±0.1<br>El g<br>Refrigerator, Washing machine, etc.)<br>3.0 max.<br>s 0.50 (ref.) moo n! 0.50 (ref.)<br>0.50 (ref.)<br>(3) (2) (1)<br>0.4±0.1 0.4±0.1 0.4±0.1 (1): Input<br>ic (2): GND<br>(3): Output<br>CSTNE_V : Frequency Marking<br>14.00-20.00MHz * : EIAJ Monthly Code<br>0.4±0.1 1.2±0.1 1.2±0.1 (in mm)<br>Frequency Initial Frequency Shift by Temperature Operating<br>Part Number Frequency Tolerance Temperature Range<br>(MHz) (%) (%) (°C)<br>CSTCR_G 4.00 to 7.99 ±0.50 ±0.20 -20 to 80<br>CSTNE_G 8.00 to 13.99 ±0.50 ±0.20 -40 to 85<br>CSTNE_V 14.00 to 20.00 ±0.50 ±0.30 -40 to 85<br>0.3±0.2 2.0±0.1 1.4 max.<br>1.15±0.05<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.70±0.10<br>0<br>.1<br>00.1± 1.30±0.15 1.1 max.<br>0<br>0.90±0.10<br>**----- End of picture text -----**<br>


Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 

15 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Measuring Circuit of Oscillating Frequency** 

**==> picture [173 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G/CSTNE_G/CSTNE_G_Z/CSTNE_V<br>VDD<br>5pF<br>To Frequency Counter<br>Rf<br>1MΩ<br>Rd<br>(1) (3)<br>C1 C2<br>(2)<br>**----- End of picture text -----**<br>


## **Standard Land Pattern Dimensions** 

**==> picture [417 x 143] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G CSTNE_G/CSTNE_V<br>(* This Land Pattern is not common to<br>CSTNR_GH5C, CSTNR_GH5L.)<br>0.8 0.7 0.8 0.7 0.8<br>0.4 0.8 0.4 0.8 0.4<br>0.4 0.4 0.4<br>1.5 1.5<br>1.2 1.2<br>Land Pattern<br>Land Pattern<br>(in mm)<br>2.6 1.6<br>1.9<br>**----- End of picture text -----**<br>


(in mm) 

## **Frequency Temperature Characteristics** 

**==> picture [495 x 343] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G CSTNE_G<br>+0.2 +0.2<br>+0.1 +0.1<br>0 0<br>-0.1 -0.1<br>-0.2 -0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140 -60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C) Temperature (°C)<br>CSTNE_V<br>+0.2<br>+0.1<br>0<br>-0.1<br>-0.2<br>-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140<br>Temperature (°C)<br>Oscillating Frequency Shift (%) Oscillating Frequency Shift (%)<br>Oscillating Frequency Shift (%)<br>**----- End of picture text -----**<br>


16 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## r Ceramic Resonators (CERALOCK ) 

## **MHz Lead Type -Standard Frequency Tolerance for Consumer/Industrial Usage** 

**==> picture [507 x 303] intentionally omitted <==**

**----- Start of picture text -----**<br>
8.0±1.0 3.0±1.0<br>MURATA's ceramic resonator, CERALOCKr with built-in<br>load capacitors, has been widely applied as the most  ***<br>suitable component for clock oscillators in a broad<br>range of microprocessors.<br>The CSTLS series can be used in the design of<br>oscillation circuits not requiring external load<br>7.0 (Ref.)<br>capacitors, enabling both high-density mounting and  (3) (2) (1)<br>cost reduction.<br>CSTLS_G   : Frequency Marking<br>3.40-10.00MHz ie       : Vender’s Code<br>Features 2.5±0.2 2.5±0.2 ***: Weekly Date Code<br>(in mm)<br>1. Oscillation circuits do not require external load capacitors.<br>There is some variation in built-in capacitance values<br>applicable to various IC. 5.5±1.0 T [*1]<br>2. Stable over a wide temperature range.<br>*<br>3. Compact, lightweight and exhibit superior shock<br>resistance performance.<br>4. Enable the design of oscillator circuits requiring no<br>adjustment.<br>5. Cost-effective and reliable availability (3) (2) (1)<br>T *1 : 3.5±1.0 (16.00–32.99MHz)<br>Applications CSTLS_X   : Frequency Marking  3.0±1.0 (33.00–70.00MHz)<br>1. DTMF generators 16.00-70.00MHz 2.5±0.2 2.5±0.2 *    : EIAJ Monthly Code<br>(in mm)<br>Ref.)(<br>0.7  5.5±0.5<br>3.5±0.3<br>0.48±0.05ø<br>6.5±0.5<br>3.5±0.3<br>0.48±0.05ø<br>**----- End of picture text -----**<br>


2. Clock oscillators for microcomputers 

3. Remote control units 

4. Automated office equipment 

Frequency Initial Frequency Shift by Temperature Operating Part Number Frequency Tolerance Temperature Range (MHz) (%) (%) (°C) **CSTLS_G** 3.40 to 10.00 ±0.5 ±0.2 [-0.4% to +0.2%:Built-in Capacitance 47pF type] -20 to 80 **CSTLS_X** 16.00 to 70.00 ±0.5 ±0.2 -20 to 80 ~~ST~~ Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. The order quantity should be an integral multiple of the "Minimum Quantity" shown on the packaging page. 

## **Measuring Circuit of Oscillating Frequency** 

32-bit Microcomputer 

**==> picture [136 x 135] intentionally omitted <==**

**----- Start of picture text -----**<br>
VDD<br>Rf To Frequency Counter<br>Rd<br>(1) (3)<br>C1 C2<br>(2)<br>a a<br>**----- End of picture text -----**<br>


17 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Frequency Temperature Characteristics** 

**==> picture [506 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTLS_G CSTLS_X<br>+0.50 0.3<br>0.2<br>+0.25<br>0.1<br>0 0.0<br>–40 0 40 80 120 –50 –30 –10 10 30 50 70 90 110 130<br>Temperature (°C) –0.1 Temperature (°C)<br>–0.25<br>–0.2<br>–0.3<br>–0.50<br>Oscillating Frequency Shift (%) Oscillating Frequency Shift (%)<br>**----- End of picture text -----**<br>


18 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Notice for Consumer/Industrial Usage -MHz Chip Type** 

## **Soldering and Mounting (CSTCR_G/CSTNR_GH5L, CSTNE_G/GH5L, CSTNE_V/VH3L Series)** 

## 1. Soldering 

## (1) Reflow soldering 

Please mount the component on a circuit board by reflow soldering. Flow soldering is not acceptable. 

## Recommendable Flux and Solder 

**==> picture [512 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
Please use rosin based flux,<br>Flux<br>not water soluble flux.<br>Please use solder (Sn-3.0Ag-0.5Cu) under  260 Peak<br>Solder the following conditions: Standard thickness  245<br>of soldering paste: 0.10 to 0.15mm. 220<br>180 Heating<br>150 (220°C min.)<br>Pre-heating<br>Recommendable Soldering Profile (150 to 180°C)<br>Gradual<br>Pre-heating 150 to 180°C 60 to 120s<br>Cooling<br>Heating 220°C min. 30 to 60s<br>upper limit: 260°C 1s max.<br>Peak Temperature<br>lower limit: 245°C 5s max.<br>60 to 120s  30 to 60s<br>Temperature shall be measured on the surface of component.<br>Temperature (°C)<br>**----- End of picture text -----**<br>


Temperature shall be measured on the surface of component. 

## (2) Soldering with Iron 

If compelled to mount the component by using a soldering iron, please do not directly touch the component with the  soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. 

## Recommendable Soldering with Iron 

|**Heating of the soldering iron**|350°C max.|
|---|---|
|**Watt**|30W max.|
|**Shape of the soldering iron**|ø3mm max.|
|**Soldering Time**|5s max. at one terminal|
|**Solder**|Sn-3.0Ag-0.5Cu|



## (4) Other 

Do not reuse components removed from a circuit board after soldering. 

## (5) Conditions for Placement Machines 

The component is recommended with placement machines that employ optical placement capabilities. The component may be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. 

## (3) Solder Volume 

Please make the solder volume less than the height of the substrate to avoid damage to the seal between the metal cap and the substrate. 

## 2. Washing / Coating 

Conformal coating or washing of the component is not acceptable, because it is not hermetically sealed. Please contact us if you need a washable component. 

Continued on the following page. 

19 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Notice for Consumer/Industrial Usage -MHz Chip Type** 

Continued from the preceding page. 

## **Storage and Operating Conditions** 

1. Product Storage Conditions 

- Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 

2. Expiration Date on Storage 

- Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 

3. Notice on Product Storage 

   - (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. 

   - (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. 

   - (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under poor conditions. 

   - (5) Please do not drop the products to avoid cracking of ceramic elements. 

   4. Other 

   - Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. 

- (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. 

## **Rating** 

The component may be damaged if excessive mechanical stress is applied. 

## **Handling** 

"CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 

20 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Notice for Consumer/Industrial Usage -MHz Lead Type** 

## **Soldering and Mounting (CSTLS_G, CSTLS_X Series)** 

The component cannot withstand washing. Please do not apply excessive mechanical stress to the component and lead terminals during soldering. 

## **Storage and Operating Conditions** 

1. Product Storage Conditions 

- Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 

2. Expiration Date on Storage 

- Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 

3. Notice on Product Storage 

   - (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. 

   - (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. 

   - (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under poor conditions. 

   - (5) Please do not drop the products to avoid cracking of ceramic elements. 

   4. Other 

   - Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. 

- (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. 

## **Rating** 

The component may be damaged if excessive mechanical stress is applied. 

## **Handling** 

"CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 

21 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Packaging for Consumer/Industrial Usage -MHz Chip Type** 

## **Minimum Quantity** 

|Part Number|Plastic Tape ø180mm|Plastic Tape ø330mm|Bulk|Reel Dimensions|
|---|---|---|---|---|
|**CSTCR_G**|3,000|9,000|500|a|
|**CSTNR_GH5L**|3,000|9,000|500|a|
|**CSTNE_G**|3,000|9,000|500|b|
|**CSTNE_GH5L**|3,000|9,000|500|b|
|**CSTNE_V**|3,000|9,000|500|b|
|**CSTNE_VH3L**|3,000|9,000|500|b|



The order quantity should be an integral multiple of the "Minimum Quantity" shown above. 

**==> picture [18 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
(pcs.)<br>**----- End of picture text -----**<br>


## **Dimensions of Reel** 

**==> picture [511 x 543] intentionally omitted <==**

**----- Start of picture text -----**<br>
a b<br>Trailer Leader Trailer Leader<br>160-190 Cover Film 160-190 Cover Film<br>Empty Components Empty Empty Components Empty<br>160 min. 160 min.<br>400-560 400-560<br>ø13.0±0.2 2.0±0.5 ø13.0±0.2 2.0±0.5<br>13.0 [+1.0] 0 9.0+1.0–0<br>17.0±1.0 13.0±1.0<br>(in mm)<br>Dimensions of Taping<br>CSTNR_GH5L CSTNE_GH5L<br>4.0±0.1 +0.1<br>2.0±0.05 ø1.5 [+0.1] -0 4.0±0.1 2.0±0.05 ø1.5 -0.0<br>4.0±0.1 ø1.5±0.1 4.0±0.1 ø1.0 -0.0+0.2 +0.10<br>2.2±0.1 Cover film peel strength force 0.1 to 0.7N  1.50 -0.05<br>Cover film peel strength force 0.1 to 0.7N<br>Cover film peel speed 300mm/min. Cover Film (5°) Cover film peel speed 300mm/min. Cover Film (7˚)<br>10°<br>10°<br>Direction of Feed (in mm) Direction of Feed (in mm)<br>CSTNE_VH3L<br>Dimensions of Carrier Tape<br>4.0±0.1<br>2.0±0.05 ø1.5 [+0.1] -0.0<br>4.0±0.1 ø1.0 [+0.2] -0.0<br>+0.10<br>Cover film peel strength force 0.1 to 0.7N 1.50 -0.05<br>Cover film peel speed 300mm/min. Cover Film (5°)<br>10°<br>Direction of Feed (in mm)<br>)1.5<br>0ø180       (– 0(ø180       )–1.5<br>1.75±0.1 1.75±0.1<br>) 5.5±0.05 ) +0.10 0.05 3.5±0.05<br>9.5( (3)(2)(1) 4.7±0.1 12.0±0.2 5.2( (3)(2)(1) 3.40 - 8.0±0.2<br>0.25±0.05 1.25±0.1 1.85 max.)( 0.25±0.05 0.90±0.10 (1.30 max.)<br>1.75±0.1<br>(5.2) (2)(3)(1) +0.103.40-0.05 3.5±0.05 8.0±0.2<br>0.25±0.05 1.10±0.10 1.40 max.)(<br>**----- End of picture text -----**<br>


Continued on the following page. 

22 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Packaging for Consumer/Industrial Usage -MHz Chip Type** 

Continued from the preceding page. 

## **Dimensions of Taping** 

**==> picture [236 x 329] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTCR_G<br>4.0±0.1<br>2.0±0.05 ø1.5 [+0.1] -0<br>4.0±0.1 ø1.5 [+0.1] -0<br>2.2±0.1<br>Cover film peel strength force 0.1 to 0.7N<br>(3°)<br>Cover film peel speed 300mm/min. Cover Film<br>10°<br>Direction of Feed (in mm)<br>CSTNE_V<br>Dimensions of Carrier Tape<br>4.0±0.1<br>2.0±0.05 ø1.5 [+0.1] -0.0<br>4.0±0.1 ø1.0 [+0.2] -0.0<br>+0.10<br>Cover film peel strength force 0.1 to 0.7N 1.50 -0.05<br>Cover film peel speed 300mm/min. Cover Film (5°)<br>10°<br>Direction of Feed (in mm)<br>1.75±0.1<br>)<br>5.5±0.05<br>9.5( (3)(2)(1) 4.7±0.1 12.0±0.2<br>0.3±0.05 1.25±0.05 1.85 max.)(<br>1.75±0.1<br>(5.2) (2)(3)(1) +0.103.40-0.05 3.5±0.05 8.0±0.2<br>0.25±0.05 1.10±0.10 1.40 max.)(<br>**----- End of picture text -----**<br>


**==> picture [236 x 156] intentionally omitted <==**

**----- Start of picture text -----**<br>
CSTNE_G<br>+0.1<br>4.0±0.1 ø1.5 -0.0<br>2.0±0.05<br>4.0±0.1 +0.2<br>ø1.0 -0.0 +0.10<br>Cover film peel strength force 0.1 to 0.7N  1.50 -0.05<br>Cover film peel speed 300mm/min. (7˚)<br>Cover Film<br>10°<br>Direction of Feed (in mm)<br>1.75±0.1<br>)<br>+0.10 0.05 3.5±0.05<br>5.2( (3)(2)(1) 3.40 - 8.0±0.2<br>0.25±0.05 0.90±0.10 (1.30 max.)<br>**----- End of picture text -----**<br>


23 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Packaging for Consumer/Industrial Usage -MHz Lead Type** 

## **Minimum Quantity** 

|Part Number|Ammo Pack|Bulk|
|---|---|---|
|**CSTLS_G (3.40 to 10.0MHz)**|2,000|500|
|**CSTLS_X (16.00 to 70.00MHz)**|2,000|500|
|(pcs.<br>The order quantity should be an integral multiple of the "Minimum Quantity" shown above.|||



The order quantity should be an integral multiple of the "Minimum Quantity" shown above. 

## **Tape Dimensions of CSTLS_G** 

|W|W|||||P|P||||||H0<br>H1<br>W1<br>W0<br>W2<br>D0|H0<br>H1<br>W1<br>W0<br>W2<br>D0|t<br>dh dh|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||2||||||dS||||||
|||||D||A<br>d<br><br>*||||||||||
|||||||||||||||||
||||||M<br>*<br>*|A<br><br>*|||M<br>*<br>|*<br>*|||H0<br>H1<br>W1<br>W0<br>W2|||
||||||||||||||H0<br>W1<br>W0<br>W2|||
||||||||||||||W1<br>W0|||
|||||||||||L1||||||
|||||||||||||||||
||||||||||||||D0|||
||||P1|F1|P0<br> F2|||Directi||on of Feed||||||
|||||||||||||||||
|||||||||||||||||
|||||||||||||||||
|I||tem||||Code||||Dimensions|||Tolerance||Remarks|
|**Width of diameter**||||||D||||8.0|||±1.0|||
|**Height of resonator**||||||A||||5.5|||±0.5|||
|**Dimensions of terminal**||||||d||||ø0.48|||±0.05|||
|**Lead length under the hold down t**||||**ape**||L1||||5.0 min.|||–|||
|**Pitch of component**||||||P||||12.7|||±0.5|Tolerance for Pitches  10xP0=127±1||
|**Pitch of sprocket hole**||||||P0||||12.7|||±0.2|||
|**Length from sprocket hole center**||||**to lead**||P1||||3.85|||±0.5|||
|**Length from sprocket hole center**<br>**component center**||||**to**||P2||||6.35|||±0.5|||
|**Lead spacing (I)**||||||F1||||2.5|||±0.2|||
|**Lead spacing (II)**||||||F2||||2.5|||±0.2|||
|**Slant forward or backward**||||||dh||||0|||±1.0|1mm max.||
|**Width of carrier tape**||||||W||||18.0|||±0.5|||
|**Width of hold down tape**||||||W0||||6.0 min.|||–|Hold down tape does not exceed the carrier tape.||
|**Position of sprocket hole**||||||W1||||9.0|||±0.5|||
|**Gap of hold down tape and carrier tape**||||||W2||||0|||+0.5<br>−0|||
|**Distance between the center of**<br>**sprocket hole and lead stopper**||||||H0||||18.0|||±0.5|||
|**Total height of resonator**||||||H1||||23.5|||±1.0|||
|**Diameter of sprocket hole**||||||D0||||ø4.0|||±0.2|||
|**Total tape thickness**||||||t||||0.6|||±0.2|||
|**Body tilt**||||||dS||||0|||±1.0|||



(in mm) 

Continued on the following page. 

24 

P16E.pdf Oct.1,2018 

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 

## **Packaging for Consumer/Industrial Usage -MHz Lead Type** 

Continued from the preceding page. 

## **Tape Dimensions of CSTLS_X** 

|W|W||P2<br>P|P2<br>P|P2<br>P|P2<br>P|P2<br>P|P2<br>P||||||W0<br>W1<br>W2<br>H0<br>H1<br>D0|W0<br>W1<br>W2<br>H0<br>H1<br>D0|t<br>dh<br>dh|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||d<br><br>A||||d|S|||||||
||||D||||||||||||||
|||||||||||||||W0<br>W1<br>W2<br>H0<br>H1|||
|||||||||||||||W0<br>W1<br>W2<br>H0|||
||||||||||||||||||
||||||||||||||||||
|||||||||||||||W0|||
|||||||||||L1|||||||
||||||||||||||||||
|||||||||||||||D0|||
||||P1|F1|F2||Di||rec|tion of Feed|||||||
||||||||||||||||||
|Item||||||Code|||Di|mensions|||Tolerance|||Remarks|
|**Width of diameter**||||||D||||5.5|||±1.0||||
|**Height of resonator**||||||A||||6.5|||±0.5||||
|**Dimensions of terminal**||||||d||||ø0.48|||±0.05||||
|**Lead length under the hold down tape**||||||L1||||5.0 min.|||–||||
|**Pitch of component**||||||P||||12.7|||±0.5||Tolerance for Pitches  10xP0=127±1||
|**Pitch of sprocket hole**||||||P0||||12.7|||±0.2||||
|**Length from sprocket hole center to lead**||||||P1||||3.85|||±0.5||||
|**Length from sprocket hole center to**<br>**component center**||||||P2||||6.35|||±0.5||||
|**Lead spacing (I)**||||||F1||||2.5|||±0.2||||
|**Lead spacing (II)**||||||F2||||2.5|||±0.2||||
|**Slant forward or backward**||||||dh||||0|||±1.0||1mm max.||
|**Width of carrier tape**||||||W||||18.0|||±0.5||||
|**Width of hold down tape**||||||W0||||6.0 min.|||–||Hold down tape does not exceed the carrier tape.||
|**Position of sprocket hole**||||||W1||||9.0|||±0.5||||
|**Gap of hold down tape and carrier tape**||||||W2||||0|||+0.5<br>−0.0||||
|**Distance between the center of**<br>**sprocket hole and lead stopper**||||||H0||||18.0|||±0.5||||
|**Total height of resonator**||||||H1||||24.5|||±1.0||||
|**Diameter of sprocket hole**||||||D0||||ø4.0|||±0.2||||
|**Total tape thickness**||||||t||||0.6|||±0.2||||
|**Body tilt**||||||dS||||0|||±1.0||||



(in mm) 

25 

P16E.pdf Oct.1,2018 

## Global Locations 

For details please visit www.murata.com 

## **Note** 

## **1 Export Control** 

- **2** Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party’s life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 

_For customers outside Japan:_ 

No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. 

- **1** _Aircraft  equipment_ 

- **2** _Aerospace equipment_ 

- **3** _Undersea equipment_ 

_For customers in Japan:_ 

- **4** _Power plant equipment_ 

For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specifi ed by the law is required for export. 

- **5** _Medical equipment_ 

- **6** _Transportation equipment (vehicles, trains, ships, etc.)_ 

- **7** _Traffi  c signal equipment_ 

- **8** _Disaster prevention / crime prevention equipment_ 

- **9** _Data-processing equipment_ 

- **10** _Application of similar complexity and/or reliability requirements to the applications listed above_ 

Murata Manufacturing Co., Ltd. 

www.murata.com 

- **3** Product specifi cations in this catalog are as of October 2018. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 

- **4** Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 

- **5** This catalog has only typical specifi cations. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering. 

- **6** Please note that unless otherwise specifi ed, we shall assume no responsibility whatsoever for any confl ict or dispute that may occur in connection with the eff ect of our and/or a third party’s intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the eff ect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 

- **7** No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. 

**==> picture [114 x 40] intentionally omitted <==**