CSM-WN11122P

CSM-WN11122P CSM 

**COLOR SENSORS** 

**CSM-WN11122P | CSM** COLOR SENSORS 

Ordering information **Type Part no.** CSM-WN11122P 1067293 Other models and accessories www.sick.com/CSM [3 lili... Illustration may differ COLD 

## Detailed technical data 

## Features 

|**Dimensions (W x H x D)**|12 mm x 31.5 mm x 21 mm|
|---|---|
|**Sensing distance**|≤ 12.5 mm|
|**Sensing distance tolerance**|± 3 mm|
|**Housing design**|Small|
|**Light source**|LED, RGB1)|
|**Wave length**|640 nm, 525 nm, 470 nm|
|**Light spot size**|1.5 mm x 6.5 mm|
|**Light spot direction**|Vertical|
|**Adjustment**|Teach-in button|
|**Teach-in mode**|Static 1-point teach-in|



- 1) Average service life: 100,000 h at TU = +25 °C. 

## Mechanics/electronics 

|**Supply voltage**|12 V DC ... 24 V DC1)|
|---|---|
|**Ripple**|< 5 Vpp 2)|
|**Current consumption**|< 50 mA3)|
|**Switching frequency**|1.7 kHz4)|
|**Response time**|300 µs5)|



- 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not exceed or fall below Uv tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) Signal transit time with resistive load. 

- 6) At supply voltage > 24 V, Imax = 50 mA. Imax is consumption count of all Qn. 

**Product data sheet | 2024-04-03 16:51:42 Subject to change without notice** 

**2** 

**COLOR SENSORS | SICK** 

**CSM-WN11122P | CSM** COLOR SENSORS 

|**Jitter**|150 µs|
|---|---|
|**Switching output**|NPN|
|**Switching output (voltage)**|NPN: HIGH = approx. UV/ LOW ≤ 2 V|
|**Switching mode**|Light/dark switching|
|**Output (channel)**|1 color|
|**Output current Imax.**|< 100 mA6)|
|**Input, teach-in (ET)**|NPN: Teach: U < 2 V, Run: U = 10 V ... < UVor open|
|**Connection type**|Cable with M12 male connector, 4-pin, 0.2 m|
|**Cable diameter**|Ø 3.4 mm|
|**Protection class**|III|
|**Circuit protection**|UVconnections, reverse polarity protected<br>Output Q short-circuit protected<br>Interference pulse suppression|
|**Enclosure rating**|IP67|
|**Weight**|Approx. 25 g|
|**Housing material**|Plastic, ABS|
|**Optics material**|Plastic, PMMA|



- 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not exceed or fall below Uv tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) Signal transit time with resistive load. 

- 6) At supply voltage > 24 V, Imax = 50 mA. Imax is consumption count of all Qn. 

## Ambient data 

|**Ambient operating temperature**|–10 °C ... +55 °C|
|---|---|
|**Ambient temperature, storage**|–20 °C ... +75 °C|
|**Shock load**|According to IEC 60068|
|**UL File No.**|NRKH.E348498 & NRKH7.E348498|



## Classifications 

|**ECLASS 5.0**|27270907|
|---|---|
|**ECLASS 5.1.4**|27270907|
|**ECLASS 6.0**|27270907|
|**ECLASS 6.2**|27270907|
|**ECLASS 7.0**|27270907|
|**ECLASS 8.0**|27270907|
|**ECLASS 8.1**|27270907|
|**ECLASS 9.0**|27270907|
|**ECLASS 10.0**|27270907|
|**ECLASS 11.0**|27270907|
|**ECLASS 12.0**|27270907|
|**ETIM 5.0**|EC001817|
|**ETIM 6.0**|EC001817|
|**ETIM 7.0**|EC001817|



**2024-04-03 16:51:42 | Product data sheet Subject to change without notice** 

**COLOR SENSORS | SICK** 

**3** 

**CSM-WN11122P | CSM** COLOR SENSORS 

|**ETIM 8.0**|EC001817|
|---|---|
|**UNSPSC 16.0901**|39121528|



## Connection/Pin assignment 

|**Connection type**|Cable with M12 male connector, 4-pin, 0.2 m|
|---|---|
|**Connection type Detail**<br>Cable diameter<br>Conductor cross section<br>Cable material|Cable diameter<br>Ø 3.4 mm<br>Conductor cross section<br>0.15 mm²<br>Cable material<br>PVC|
|**Pin assignment**<br>BN 1<br>WH 2<br>BU 3<br>BK 4|BN 1<br>+ (L+)<br>WH 2<br>ET<br>BU 3<br>- (M)<br>BK 4<br>Q|



## Dimensional drawing (Dimensions in mm (inch)) 

**==> picture [272 x 354] intentionally omitted <==**

**----- Start of picture text -----**<br>
12 0.5 21<br>(0.47) (0.02) (0.83) 3<br>4<br>2<br>1<br>18.3<br>hE! (0.72) 3<br>3<br>(0.12)<br>f<br>‘<br>:<br>Z a<br>M12<br>_<br>0.9<br>(0.04)<br>0.5<br>(0.02)<br> (1.00) 1.12)( 1.24)(<br>9<br>(0.35)<br>25.4 28.5  31.5<br>9.7<br>(0.38)<br>L<br>(1.66)<br>42<br>**----- End of picture text -----**<br>


For length of cable (L), see technical data 

**4** 

**Product data sheet | 2024-04-03 16:51:42 Subject to change without notice** 

**COLOR SENSORS | SICK** 

**CSM-WN11122P | CSM** COLOR SENSORS 

- ① Center of optical axis, sender 

- ② Center of optical axis, receiver 

- ③ Mounting holes M3 

- ④ Display and adjustment elements 

## Adjustments 

Display and adjustment elements 

**==> picture [62 x 99] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 3<br>1<br>①   Teach-in button<br>②   LED yellow<br>**----- End of picture text -----**<br>


① Teach-in button 

③ LED green 

## Pin assignment 

Connection type. see table: Connection/PIN assignment 

2 1 3 4 M12 male connector, 4-pin, A-coding 

**2024-04-03 16:51:42 | Product data sheet Subject to change without notice** 

**COLOR SENSORS | SICK** 

**5** 

**CSM-WN11122P | CSM** COLOR SENSORS 

## Concept of operation 

Setting the switching threshold 

**1. Trigger teach-in 2. Select color tolerance** 

Position object in light field. Press teach-in button > 1 s. 

Press teach-in button when Press teach-in button when transmitted light is green transmitted light is blue **= tolerance medium = tolerance precise.** (standard setting). 

Press teach-in button when transmitted light is red **= tolerance coarse.** 

Teach-in can also be performed using an external control signal (only dynamic teach-in). 

Keylock activation and deactivation: hold down teach-in button > 30 s. 

## Sensing distance 

**==> picture [222 x 216] intentionally omitted <==**

**----- Start of picture text -----**<br>
110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>0 5 10 15 20<br>(0.20) (0.39) (0.59) (0.79)<br>Sensing distance in mm (inch)<br>Relative sensitivity in %<br>**----- End of picture text -----**<br>


**6** 

**Product data sheet | 2024-04-03 16:51:42 Subject to change without notice** 

**COLOR SENSORS | SICK** 

**CSM-WN11122P | CSM** COLOR SENSORS 

## Recommended accessories 

> Other models and accessories > www.sick.com/CSM 

||**Brief description**|**Type**|**Part no.**|
|---|---|---|---|
|Mounting brackets and plates||||
||Stainless steel (1.4301)|BEF-WN-G6|2062909|
|Plug connectors and cables||||
||• **Connection type head A:**Female connector, M12, 4-pin, straight, A-coded|YF2A14-|2096235|
||• **Connection type head B:**Flying leads|050VB3XLEAX||
||• **Signal type:**Sensor/actuator cable|||
||• **Cable:**5 m, 4-wire, PVC|||
||• **Description:**Sensor/actuator cable, unshielded|||
||• **Application:**Zones with chemicals|||
||• **Connection type head A:**Male connector, M12, 4-pin, straight|STE-1204-G|6009932|
|i<|• **Description:**Unshielded|||
|~~|• **Connection systems:**Screw-type terminals|||
||• **Permitted cross-section:**≤ 0.75 mm²|||



**2024-04-03 16:51:42 | Product data sheet Subject to change without notice** 

**COLOR SENSORS | SICK** 

**7** 

## SICK At A GlAnCe 

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. 

We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. 

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. 

For us, that is “Sensor Intelligence.” 

## WOrldWIde preSenCe: 

Contacts and other locations www.sick.com 

SICK AG | Waldkirch | Germany | www.sick.com