CPC1020N

**CPC1020N 30V Normally-Open Single-Pole 4-Pin SOP OptoMOS[®] Relay** 

INTEGRATED CIRCUITS DIVISION 

|**Parameter**|**Rating**|**Units**|
|---|---|---|
|BlockingVoltage|30|VP|
|Load Current|1.2|ADC|
|On-Resistance(max)|0.25||



## **Features** 

- 1500Vrms Input/Output Isolation 

- Small 4-Pin SOP Package 

- Low Drive Power Requirements 

- High Reliability 

- Arc-Free With No Snubbing Circuits 

- No EMI/RFI Generation 

- Tape & Reel Version Available 

- Flammability Rating UL 94 V-0 

## **Description** 

The CPC1020N is a 30V, single-pole, normally-open (1-Form-A) Solid State Relay. The ultra-low on-resistance, 0.25  , of this relay allows for high-current operation. 

IXYS Integrated Circuits' patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing 1500Vrms input to output isolation. Control of the isolated output is accomplished by means of the highly efficient infrared LED at the input. 

## **Approvals** 

- UL Recognized Component: File E76270 

- CSA Certified Component: Certificate 1172007 

## **Applications** 

- Sensor Circuitry 

   - EN/IEC 60950-1 Certified Component: Certificate available on our website 

- Instrumentation 

- Multiplexers 

- Data Acquisition 

- Electronic Switching 

- I/O Subsystems 

- Meters (Watt-Hour, Water, Gas) 

## **Ordering Information** 

**Part # Description** CPC1020N 4-Pin SOP (100/tube) ~~—————~~ CPC1020NTR 4-Pin SOP (2000/reel) 

- Medical Equipment—Patient/Equipment Isolation 

- Aerospace 

- Industrial Controls 

## **Pin Configuration** 

**==> picture [131 x 47] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 4<br>+ Control Load<br>2 3<br>– Control Load<br>**----- End of picture text -----**<br>


## **Switching Characteristics of Normally-Open Devices** 

**==> picture [125 x 82] intentionally omitted <==**

**----- Start of picture text -----**<br>
Form-A<br>IF<br>90%<br>10%<br>ILOAD<br>ton toff<br>**----- End of picture text -----**<br>


**1** 

DS-CPC1020N-R05 

**www.ixysic.com** 

**CPC1020N** 

INTEGRATED CIRCUITS DIVISION 

## **Absolute Maximum Ratings @ 25ºC** 

|**Parameter**|**Ratings**|**Units**|
|---|---|---|
|BlockingVoltage|30|VP|
|Input Power Dissipation1|75|mW|
|Input Control Current<br>Peak(10ms)|50|mA|
||1|A|
|Reverse Input Voltage|5|V|
|Total Power Dissipation2|400|mW|
|Isolation voltage, Input to Output|1500|Vrms|
|Operational Temperature|-40 to +85|°C|
|Storage Temperature|-40 to +125|°C|



_Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied._ 

_Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements._ 

1  Derate linearly 1.33 mW / ºC 

2  Derate linearly 3.33 mW / ºC 

## **Electrical Characteristics @ 25ºC** 

|**Parameter**|**Conditions**|**Symbol**|**Min**|**Typ**|**Max**|**Units**|
|---|---|---|---|---|---|---|
|**Output Characteristics**<br>~~ee~~|||||||
|Load Current<br>Continuous1<br>Peak<br>~~ee~~|IF=2mA<br>~~ee~~|IL<br>~~ee~~|-<br>~~ee~~|-<br>~~ee~~|1.2<br>~~ee~~|ADC<br>~~ee~~|
||t<10ms<br>~~ee~~|ILPK<br>~~ee~~|-<br>~~ee~~|-<br>~~ee~~|3<br>~~ee~~|A<br>~~ee~~|
|On-Resistance2<br>~~ee~~|IL=1A<br>~~ee~~|RON<br>~~ee~~|-<br>~~ee~~|0.116<br>~~ee~~|0.25<br>~~ee~~|<br>~~ee~~|
|Off-State Leakage Current<br>~~a~~|VL=30VP<br>~~a~~|ILEAK<br>~~a~~|-<br>~~a~~|-<br>~~a~~|1<br>~~a~~|A<br>~~a~~|
|Switching Speeds<br>Turn-On<br>Turn-Off<br>~~a~~|IF=5mA, VL=10V<br>~~a~~|ton<br>~~a~~|-<br>~~a~~|0.48<br>~~a~~|3<br>~~a~~|ms<br>~~a~~|
|||toff<br>~~a~~|-<br>~~a~~|0.65<br>~~a~~|3<br>~~a~~||
|Output Capacitance|IF=0mA, VL=25V, f=1MHz|COUT|-|33|-|pF|
|**Input Characteristics**|||||||
|Input Control Current to Activate|IL=1A|IF|-|0.13|2|mA|
|Input Control Current to Deactivate|-|IF|0.1|-|-|mA|
|Input Voltage Drop|IF=5mA|VF|0.9|1.2|1.5|V|
|Reverse Input Current|VR=5V|IR|-|-|10|µA|
|**Input/Output Characteristics**|||||||
|Capacitance, Input to Output|VIO=0V, f=1MHz|CIO|-|3|-|pF|



1   Load current derates linearly from 1.2A @ 25oC to 0.58A @85oC. 

2   Measurement taken within 1 second of on-time. 

## **ESD Rating** 

**ESD Rating (Human Body Model)** 1000 Volts ~~EE~~ 

R05 

**www.ixysic.com** 

**2** 

call INTEGRATED CIRCUITS DIVISION **CPC1020N** ~~a~~ 

## **PERFORMANCE DATA*** 

**==> picture [493 x 569] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical LED Forward Voltage Drop Typical IF for Switch Operation Typical On-Resistance Distribution<br>(N=50, IF=5mA) (N=50, IL=100mA) (N=50, IF=2mA, IL=1A)<br>35 25 20<br>30 20 tel<br>25 Tt tf 15 |ff<br>20 15 22 |<br>See 10 |<br>15 10<br>10 5 +ta oe | oa 5 its<br>5<br>0 0 itu. 0 iB<br>1.25 1.26 1.27 1.28 1.29 0.093 0.101 0.109 0.117 0.125 0.133 0.113 0.114 0.115 0.116 0.117 0.118<br>LED Forward Voltage (V) LED Forward Current (mA) On-Resistance ( )<br>Typical Turn-On Time Distribution Typical Turn-Off Time Distribution Typical Blocking Voltage Distribution<br>(N=50, IF=5mA, IL=5mA) (N=50, IF=5mA, IL=5mA) (N=50)<br>25 30 25<br>20 25 20 LIL,<br>20<br>15 15 |<br>15<br>10 10 |=<br>10<br>50 50 50 moltEee<br>0.35 0.40 0.45 0.50 0.55 0.60 0.47 0.55 0.63 0.71 0.79 37.8 38.2 38.6 39.0 39.4<br>Turn-On Time (ms) Turn-Off Time (ms) Blocking Voltage (VP)<br>Typical IF for Switch Operation<br>Typical LED Forward Voltage Drop vs. Temperature Typical Load Voltage vs. Load Current<br>1.6 vs. Temperature 0.20 (IL=1A) 1.5 (IF=2mA)<br>IF=50mA<br>1.5 IF=20mA 0.18 1.0<br>IF=10mA<br>1.4 aS|tyme | 0.16 rr || || [|tT TK| lr 0.5 FPtt || || || |Lee[eyTe<br>1.3 Se eZ ee 0.14 r | | | ke 0.0 Ft | | pe<br>1.2 0.12 -0.5<br>2 SSS r | [eel {| pt tet | tt<br>1.1 IF=5mA 0.10 -1.0<br>IF=2mA<br>1.0 , ARS Ft ttt 0.08 reFetet et| t| t lt -1.5 eaePAL<br>-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20<br>Temperature (ºC) Temperature (ºC) Load Voltage (V)<br>Typical Turn-On Time Typical Turn-Off Time<br>vs. LED Forward Current vs. LED Forward Current Typical On-Resistance vs. Temperature<br>2.5 (IL=100mA) 700 (IL=100mA) 0.40 (IF=2mA, IL=0.5A)<br>2.0 680 0.35 pt | | |tt<br>: > 0.30 fF | | | [| | fs]<br>1.5 660<br>0.25 Ft | | h| LV<br>1.0 640<br>0.20 Pt tT | TAL<br>0.5 620 0.15 P| |TA<br>0 600 0.10 o ven een ees 0<br>0 10 20 30 40 50 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100<br>LED Forward Current (mA) LED Forward Current (mA) Temperature (ºC)<br>Device Count (N) Device Count (N) Device Count (N)<br>Device Count (N) Device Count (N) Device Count (N)<br>Load Current (A)<br>LED Forward Voltage (V)<br>LED Forward Current (mA)<br>s) )<br>Turn-On Time (ms) Turn-Off Time ( On-Resistance (<br>**----- End of picture text -----**<br>


*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 

**www.ixysic.com** 

R05 

**3** 

ee INTEGRATED CIRCUITS DIVISION **CPC1020N** ~~a~~ 

## **PERFORMANCE DATA*** 

**==> picture [530 x 281] intentionally omitted <==**

**----- Start of picture text -----**<br>
Maximum Load Current<br>Typical Turn-On Time vs. Temperature Typical Turn-Off Time vs. Temperature vs. Temperature<br>3.5 (IL=100mA) 1.2 (IL=100mA) 1.50 (IF=2mA)<br>3.0 7 1.1 1.25<br>2.5 1.0<br>0.9 eee 1.00<br>2.0 SEE ~ | | | | ft ft r fof fl tt<br>0.8 0.75<br>1.51.0 OPISS IF=2mA ES 0.7 NNFINE IF=2mA LL SL, 0.50 reweTP TS<br>0.6<br>0.50 |Fp tettt IF=5mA —ft tt 0.50.4 SieeSeSee, IF=5mA <r 0.250.0 OEFettEETET tt<br>-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100<br>Temperature (ºC) Temperature (ºC) Temperature (ºC)<br>Typical Blocking Voltage Typical Leakage Current vs. Temperature<br>vs. Temperature Measured Across Pins 3&4 Output Capacitance vs. Load Voltage<br>40.5 (IL=1 y A) 100 (IF=0mA, VL=30V) 110 (IF=0mA, f=1MHz)<br>40.0 ae 100 en ee<br>80<br>39.5 ae Pt TT Ty 90 rt, tf.<br>39.0 a 60 P| | LT | IL 80 2<br>38.5 70<br>38.0 FLEE 40 /| 60 FEL -_L_-_<br>37.5 2 20 rT TT Vet 50 Ne<br>37.0 40<br>36.5 APTt EEE 0 TW TY LL 30 enEee a<br>-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 0 5 10 15 20 25<br>Temperature (ºC) Temperature (ºC) Load Voltage (V)<br>Turn-On Time (ms) Turn-Off Time (ms) Load Current (A)DC<br>)Blocking Voltage (VP Leakage Current (nA)<br>Output Capacitance (pF)<br>**----- End of picture text -----**<br>


**==> picture [159 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
Energy Rating Curve<br>3.5<br>3.0 SUIT TIM TTT TIM TTT<br>2.5 ETE<br>2.0 0AS<br>1.5<br>ST TT TINT<br>1.0 SUN A a a<br>0.5 20 001 AN A<br>0.0 E CLA LITA ETM EIEN ETT ih<br>10 s 100 s 1ms 10ms 100ms 1s 10s 100s<br>Time<br>Current (A)<br>**----- End of picture text -----**<br>


*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 

R05 

**www.ixysic.com** 

**4** 

**CPC1020N** 

INTEGRATED CIRCUITS DIVISION 

## **Manufacturing Information** 

## **Moisture Sensitivity** 

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of ¢) the joint industry standard, **IPC/JEDEC J-STD-020** , in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. 

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. 

This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard **IPC/JEDEC J-STD-033** . 

|**Device**<br>~~———EE~~|**Moisture Sensitivity Level (MSL) Classifi cation**<br>~~———EE~~|
|---|---|
|CPC1020N<br>~~———EE~~|MSL 3<br>~~———EE~~|



## **ESD Sensitivity** 

This product is **ESD Sensitive** , and should be handled according to the industry standard **JESD-625** . 

## **Soldering Profile** 

Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of **J-STD-020** must be observed. 

**Device Classifi cation Temperature (Tc) Dwell Time (tp) Max Refl ow Cycles** CPC1020N 260ºC 30 seconds 3 ~~———————EEE~~ **Board Wash** IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. 

**www.ixysic.com** 

R05 

**5** 

**CPC1020N** 

INTEGRATED CIRCUITS DIVISION 

## **MECHANICAL DIMENSIONS** 

## **CPC1020N** 

**==> picture [402 x 389] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.089  ±  0.025 Recommended PCB Land Pattern<br>(0.161  ±  0.001)<br>0.203 ± 0.025<br>0.60<br>(0.008 ± 0.001)<br>(0.024)<br>3.810  ±  0.025 ary 6.096  ±  0.102 = tk<br>(0.150  ±  0.001) (0.240  ±  0.004)<br>0.559  ±  0.127<br>(0.022  ±  0.005) 3.85<br>Pin 1 0.910  ±  0.025 (0.152)<br>Ly, 2.54 Typ (0.036  ±  0.001) ia 1.54 r y<br>(0.100 Typ) (0.061)<br>4<br>2.030 ±  0.025 2.54<br>(0.080 ±  0.001) Dimensions (0.10)<br>Package standoff: mm<br>0.064 ± 0.040 (inches)<br>0.481 (0.0025 ± 0.0015)<br>(0.019)<br>0.381  ±  0.025 Note:<br>(0-0.004)0-0.1 cal (0.015  ±  0.001) 1. Lead dimensions do not include plating: 1000 microinches max.<br>330.2 Dia<br>(13.00 Dia)<br>7 ! beeeoe66 0] [<br>W=12.00<br>Top Cover B0=4.70 (0.472)<br>Tape Thickness (0.185)<br>0.102 Max<br>(0.004 Max)<br>K(0.106)0=2.70 A(0.256)0=6.50 P1=8.00(0.315)<br>K1=2.30<br>(0.091) so t<br>OJ iach_ User Direction of Feed a<br>Embossed - Dimensionsmm<br>Carrier (inches)<br>Embossment NOTE:  All dimensional tolerances per Standard EIA-481-2 except as noted<br>**----- End of picture text -----**<br>


## **CPC1020NTR Tape & Reel** 

## **For additional information please visit our website at: www.ixysic.com** 

IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.  Neither circuit patent licenses nor indemnity are expressed or implied.  Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. 

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage.  IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 

Specification:  DS-CPC1020N-R05 ©Copyright 2018, IXYS Integrated Circuits OptoMOS® is a registered trademark of IXYS Integrated Circuits All rights reserved.  Printed in USA. 

**6** 

6/1/2018