CP1W-BAT01

## **CP1E** 

Cost-effective CP1E with Enhanced Expandability for Analog and Temperature Control 

» Easy to use » Economical » Efficient 

## **Cost-Effective, Easy Application, Application to Many Systems** 

**==> picture [519 x 319] intentionally omitted <==**

**----- Start of picture text -----**<br>
Power supply input terminals<br>Operation indicators Program capacity : 2 Ksteps<br>DM Area capacity : 2 Kwords<br>Timers/Counters : 256 each<br>High-speed counters :10 kHz × 6 inputs<br>5 Input terminal block = :<br>Input terminals<br>Input indicators<br>Output indicators<br>Easy to use<br>| Support Software with<br>Peripheral USB port Output terminals Output terminal block<br>“Smart Input” intuitive operation.<br>USB port provides.<br>Support Software can be<br>connected using commercially<br>available USB cables.<br>ECOS-type—a<br>The Basic Models provide cost performance and easy application.<br>**----- End of picture text -----**<br>


## **Expanded capabilities to control analog I/O and temperature at minimum cost** 

## **Analog I/O Units** 

Up to 8 analog I/O per Unit, high resolution of 1/12,000 

## **Temperature Sensor Units** 

## **Analog Option Board** 

Note: Can be mounted to the CP1E-N □□ only. 

Multi-inputs: thermocouple and analog inputs, up to 12 thermocouple inputs per Unit 

Windows is  registered trademarks of Microsoft Corporation in the USA and other countries. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies. 

2 

## **Economical** 

## **Exceptional Cost Responding to Global Competition with More Device Control Possibilities** 

The CP1E  provide high cost performance to further reduce costs by allowing you to select the optimal CPU Unit from the E □□ S-type Basic Models or N/ □□ S(1)-type Application Models. 

## **Economical** 

Exceptional Cost. Optimal cost with a selection of two types of CP1E CPU Units. 

High-speed counters : 100 kHz × 2 inputs and 10 kHz × 4 inputs 

## **Efficient** 

Option Battery 

Program capacity : 8 Ksteps DM Area capacity : 8 Kwords Timers/Counters : 256 each 

Peripheral USB port 

Lineup including CPU Units with built-in three ports: USB, RS-232C, RS-485. The depth of the CP1E-N □□ S(1)-type CPU Units with RS-232C connectors is reduced by 20 mm. 

Built-in RS-232C communications status indicator Built-in RS-232C port 

Built-in RS-485 communications status indicator *[1] 

Pulse outputs : 100kHz x 2 outputs *[2] 

Built-in RS-485 port *[1] 

*1. N □□ S1-type only. 

*2. Models with transistor outputs. 

**Compatible with small Programmable Terminals and inverter-controlled position control.** 

3 

## **Simple and User Friendly** 

## **Easy to use input editor with smart input function** 

When you begin typing an instruction from the keyboard in Ladder Editor Mode, suggested instructions are displayed and the addresses are automatically entered. Connecting lines are added automatically based on the cursor position, enabling intuitive ladder programming. 

## **All** ~~**Models**~~ 

## Easy Input Editor 

## Instruction and Address Input Assist Functions 

When you begin typing an instruction from the keyboard while in the Ladder Editor Window, suggested instructions are displayed. All you have to do is select the instruction from the list for easy input even if you do not remember the entire mnemonic. 

## Address Incrementing 

The address of the next operand, including input bits and output bits, is incremented by one and displayed as the default. This enables easily inputting consecutive addresses. 

**==> picture [67 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
Instruction names<br>are displayed as<br>guidance.<br>**----- End of picture text -----**<br>


**==> picture [142 x 28] intentionally omitted <==**

**----- Start of picture text -----**<br>
Default addresses CIO 1 and CIO 101 are<br>displayed by incrementing the previously<br>input addresses, CIO 0 and CIO 100.<br>**----- End of picture text -----**<br>


**==> picture [147 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
When you type “M,” a list of instructions<br>starting with M is displayed.<br>**----- End of picture text -----**<br>


## User-friendly Ladder Program Input 

## Automatic Connecting Line Insertion 

With the automatic connecting line insertion function the necessary connection is added automatically based on the curser position. 

Automatic Column Insertion When Inserting Instructions 

The column is automatically inserted when an instruction is added even if the curser is above another instruction. 

When an instruction is input at the curser, a connecting line is automatically inserted. 

When an instruction is input at the curser, a column is automatically inserted for the instruction. 

4 

**Intuitive control with “Smart Input.”** 

## Easy to reuse ladder programming 

## Intuitive Menu Structure 

## Copying with Address Incrementing 

To create the same group of ladder instructions more than once with the address addition copy function, the instructions can be reused simply by inputting an address offset. 

## Intuitive Menu Display 

An intuitively designed menu structure makes it easy to see the overall system simply by looking at the menu for smooth operation without referring to a manual. 

**==> picture [334 x 85] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.00 100.00 ! '| 0.00 100.00 —<br>0.01 H 1 0.01 /—_\_| (CommieLuss— AE|  Pee<br>r i Bets ee<br>\ H<br>0.05 100.05 The function required for<br>Offset set to 5 bits     7 1 ! process is grouping.<br>0.06<br>**----- End of picture text -----**<br>


## **Only commercially available USB cables required** 

All CP1E CPU Units use high-speed USB for the peripheral port. Support software (computers) can be connected using commercially available USB cables. Without the need for USB conversion cables or special cables, connection is easier and cable cost is low. 

## **All** ~~**Models**~~ 

**==> picture [228 x 42] intentionally omitted <==**

**----- Start of picture text -----**<br>
Commercially<br>fix a<br>available USB cable<br>ae hit<br>Support<br>Software<br>**----- End of picture text -----**<br>


## **The depth of CPU Units with RS-232C connectors is reduced by 20 mm** 

6 mm slimmer than the normal type. 

~~**Renewal**~~ **type** 

**==> picture [331 x 137] intentionally omitted <==**

**----- Start of picture text -----**<br>
125mm<br>85mm<br>79mm<br>20 mm<br>Normal type<br>slimmer<br>Renewal type<br>CP1E-N □□ S(1)<br>When using XW2Z- □ 00T- □<br>105mm<br>**----- End of picture text -----**<br>


5 

## **Efficient and Effective** 

## **More Applications with AdvancedControl Capabilities and Functionality** 

## **A** ~~**pplication Models**~~ 

The Application Models (CP1E-N □□ /N □□ S(1)) are equipped with high-speed counters, pulse outputs, and a built-in serial port(s). 

In addition, using the Expansion Unit and Option Board, you can control a wide range of devices. 

**==> picture [476 x 421] intentionally omitted <==**

**----- Start of picture text -----**<br>
Built-in RS-232C High-<br>speed<br>Counters<br>PT Rotary Encoder<br>Built-in USB<br>Support Software<br>Built-in RS-485 *<br>|<br>PID Control<br>Modbus-RTU Temperature<br>Control<br>Easy<br>Master<br>Temperature Sensor SSR<br>Inverter<br>- Pulse us Analog<br>Outputs I/O<br>Control<br>Servomotor / Driver Displacement Sensor Inverter<br>oe)a<br>* Use a built-in RS-485 port of the N □□ S1-type CPU Unit or mount an RS-422A/485 Option Board to the N □□ -type CPU Unit.<br>**----- End of picture text -----**<br>


6 

**Flexibly handle even small-scale systems. Various Option Units available for increased expandability.** 

## **Models with** si Pulse Outputs tw **transistor Output** 

Two 100kHz pulse outputs for high-precision position control. 

**==> picture [377 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
PT<br>Pulse outputs<br>RS-232C<br>Servomotor / Driver<br>**----- End of picture text -----**<br>


## High-speed Counters* 

Control multiple axes with one PLC using the two 100kHz and four 10kHz, single-phase high-speed counters. 

- The Basic Models are equipped with six 10kHz, single-phase high-speed counters. 

**==> picture [186 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
PT<br>High-speed counter<br>{<br>RS-232C<br>**----- End of picture text -----**<br>


**==> picture [35 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rotary<br>encoder<br>Inverter<br>**----- End of picture text -----**<br>


## Modbus-RTU easy master 

Specify Inverter speeds via RS-485 

**==> picture [197 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
High-speed counter<br>Rotary encoder<br>RS-485<br>Inverter<br>General-purpose motor<br>**----- End of picture text -----**<br>


7 

## **Efficient and Effective** 

## Analog I/O Control 

High-accuracy analog I/O control with a resolution 1/12,000. 

You can add up to 4 analog I/O by mounting an Analog Option Board and up to 24 analog I/O by connecting Expansion Units. 

Analog Input zs[5.] « Displacement Sensor Pressure Sensor Analog Output ma’9 Inverter Valve 

## Temperature Control 

The combination of the Temperature Input Unit with the PID instructions enables temperature control. Up to 12 thermocouple inputs per Unit for CP1W-TS004. 

The CP1W-TS003 has two inputs that can be used for temperature sensor or analog inputs. Both temperature sensor and analog inputs can be achieved with only one Unit. 

**==> picture [468 x 174] intentionally omitted <==**

**----- Start of picture text -----**<br>
PID instructions<br>with autotuning<br>PIDAT CP1W-TS003<br>S<br>C<br>D<br>TPO CH1:Temperature Sensor Input<br>PT CS CH2:Temperature Sensor Input<br>R CH3:Temperature Sensor/Analog Input<br>CH4:Temperature Sensor/Analog Input<br>RS-232C<br>Heater SSR<br>Temperature  Temperature  Analog Sensor<br>Sensor Sensor<br>c Hhh m.<br>CH1 CH2 CH3 CH4<br>**----- End of picture text -----**<br>


## Serial PLC Links 

Link data with up to 10 words between up to nine CP1E-N CPU Units when controlling a device with multiple CP1E-N PLCs. 

**==> picture [340 x 126] intentionally omitted <==**

**----- Start of picture text -----**<br>
Polling Unit Polled Node No. 0 Polled Node No. 7<br>CJ1M CPU Units can<br>also be connected.<br>Polling Unit Polling Unit Polling Unit<br>Polled Node No. 0 Polled Node No. 0 Polled Node No. 0<br>Polled Node No. 7 Polled Node No. 7 Polled Node No. 7<br>**----- End of picture text -----**<br>


8 

**Flexibly handle even small-scale systems. Various Option Units available for increased expandability.** 

## Ethernet Communications 

Mount a CP1W-CIF41 Ethernet Option Board to an option board slot on the CP1E-N/NA type CPU Unit. Perform monitoring and programming with CX-Programmer,or communicate with a host computer via Ethernet.(server function only) 

**==> picture [356 x 123] intentionally omitted <==**

**----- Start of picture text -----**<br>
Computer FINS-UDP<br>(server function only) FINS-TCP<br>protocol<br>Industrial switching hub<br>Bitty RAYSye\\ W4S1<br>— sifatatetetatate atetin)<br>t= a<br>U U UJ<br>CP1E CP1H / CP1L<br>**----- End of picture text -----**<br>


## **Optional units for more flexibility** 

An option board for an additional Serial or Ethernet communication port can be added to the N30/40/60 and NA20 CPU Unit. Three expansion units are available. 

* The Option Board cannot be mounted to the CP1E-N □□ S/N □□ S1. 

**==> picture [492 x 345] intentionally omitted <==**

**----- Start of picture text -----**<br>
N3 0 /4 0 / 60 ,<br>NA 20  C P U unit oven (DEBSPELE‘il 2EEESMES ETP ateroe | ee a a 3 aan a"5 iit<br>Option Board —————— 2 20cm 20pm 20pm<br>RS-232C  Rene eee Sead” Seo” Seo”<br>Option Board<br>CP1W-CIF01<br>) @ e e e<br>RS-422A/485 Option Board<br>CP1W-CIF11<br>(Maximum transmission<br>[distance: 50m)] 30 /4 0 / 60 ,<br>NA 20  C P U unit<br>RS-422A/485 Option Board<br>(Isolated-type)<br>CP1W-CIF12-V1 Expansion Units and Expansion I/O Units<br>(Maximum transmission<br> distance: 500m)<br>Expansion I/O Units Analog I/O Units Temperature Sensor Units  CompoBus/S I/O Link Unit<br>Ethernet<br>Option Board<br>CP1W-CIF41<br>(CP1E PLCs are supported<br>by CP1W-CIF41 version 2.0<br> or later.)<br>Units with 40 I/O Units with 16 Outputs Analog I/O Unit  Temperature  Temperature  CompoBus/S Slave<br>Analog Input  CP1W-40EDR / CP1W-40EDT / CP1W-16ER / CP1W-16ET / CP1W-MAD11 Sensor Units  Sensor Units CP1W-SRT21<br>Option Board CP1W-40EDT1 CP1W-16ET1 CP1W-MAD42 (Thermocouples)  (Platinum Resistance<br>CP1W-ADB21(For CPU Unit  Units with 20 I/O CP1W-20EDR1 / CP1W-20EDT / Units with 8 Outputs CP1W-8ER / CP1W-8ET / CP1W-MAD44 Analog Input Unit CP1W-TS001CP1W-TS002  Thermometers) CP1W-TS101<br>version 1.2 or later) CP1W-20EDT1 CP1W-8ET1 CP1W-AD041 CP1W-TS003 CP1W-TS102<br>CP1W-AD042 CP1W-TS004<br>Units with 32 Outputs Unit with 8 Inputs Analog Output Unit<br>Analog Output Option Board CP1W-32ER / CP1W-32ET /CP1W-32ET1 CP1W-8ED CP1W-DA021CP1W-DA041<br>CP1W-DAB21V CP1W-DA042<br>(For CPU Unit<br>version 1.2 or later)<br>Analog I/O<br>Option Board<br>CP1W-MAB221<br>(For CPU Unit<br>version 1.2 or later)<br>**----- End of picture text -----**<br>


9 

## **Line up/Variation** 

## **Selecting the best CPU Unit for your system helps minimize and optimize costs.** 

Line up 

**==> picture [493 x 594] intentionally omitted <==**

**----- Start of picture text -----**<br>
N □□ -type CP1E CPU Units Application Models  (Option Slot, Built-in 2 ports : RS-232C, USB)<br>Program<br>capacity Models with flexible communication ports: RS-232C port and one more additional port using option board Built-in Analog<br>I/O type<br>Normal<br>type<br>N30D □-□ N40D □-□ N60D □-□ NA20D □-□<br>N □□ S1-type CP1E CPU Units Application Models  (Built-in 3 ports : RS-232C, RS-485, USB)<br>Models with built-in RS-232C and RS-485 ports to connect with both Inverters and Temperature Controllers<br>8K<br>steps<br>Renewal<br>type<br>N30S1D □-□ N40S1D □-□ N60S1D □-□<br>N □□ S-type CP1E CPU Units Application Models  (Built-in 2 ports : RS-232C, USB)<br>Standard models with built-in RS-232C port<br>N14D □-□ N20D □-□ N30SD □-□ N40SD □-□ N60SD □-□<br>|<br>E □□ (S)-type CP1E CPU Units Basic Models  (Built-in USB port)<br>Basic models suitable for basic I/O control<br>2K<br>steps<br>E10D □-□ E14SDR-A E20SDR-A E30SDR-A E40SDR-A E60SDR-A<br>Number of I/O 10 14 20 30 40 60 (Built-in analog : 2 inputs / 1 output)20<br>Basic Models A pplicatio n  Models<br>N □□  CPU Unit<br>N □□ S CPU Unit N □□ S1 CPU Unit<br>E □□  CPU Unit E □□ S CPU Unit RS-232C+1<br>option slot * Built-in RS-232C Built-in RS-232C+RS-485<br>Transistor Transistor Transistor Transistor Transistor<br>Relay outputs outputs Relay outputs outputs Relay outputs outputs Relay outputs outputs Relay outputs outputs<br>(sinking/sourcing) (sinking/sourcing) (sinking/sourcing) (sinking/sourcing) (sinking/sourcing)<br>Power Power<br>supply AC DC, AC} DC |} AC | DC |; AC DC supply AC |} DC | AC | DC | AC ;} DC, AC | DC | AC | DC | AC |} DC<br>10 I/O  10 I/O<br>points points<br>14 I/O  14 I/O<br>points points<br>20 I/O  20 I/O<br>points points<br>30 I/O  30 I/O<br>points points<br>40 I/O  fe |-|-|-|e|-|-|- 40 I/O  je l|elelele|-|-lele|-|-le<br>points points<br>60 I/O  fe |-|-|-|[e|-|-|- 60 I/O  j@l|elelele|-|-lele|-|-le<br>points points<br>|- |-|-|-Je|-|-|- 20 I/O je |elelele|-|-lele|-|-le<br>points<br>(Built-in Analog)<br>* Only N30/40/60 has option slot.<br>**----- End of picture text -----**<br>


10 

## Variation 

|**Basic Models**<br>**Normal type**<br>**Renewal type**|**Basic Models**<br>**Normal type**<br>**Renewal type**|**Basic Models**<br>**Normal type**<br>**Renewal type**|**Application Models**<br>~~Oe~~|**Application Models**<br>~~Oe~~|**Application Models**<br>~~Oe~~|**Application Models**<br>~~Oe~~|
|---|---|---|---|---|---|---|
|||**Normal type**|**Renewal type**||**Normal type**|**Normal type (Built-in Analog)**|
|**Model**<br>~~Ss~~<br>~~my~~|E□□S<br>~~Ss ~~<br>~~myoe~~|E□□<br> ~~eeee=~~<br>~~oe~~|N□□S<br>~~eeee=~~<br>~~se~~|N□□S1<br>~~eeee=~~<br>~~8~~|N□□<br>~~eeee=~~<br>~~8~~|NA20<br>~~eeee=~~<br>~~a~~|
|**Program capacity**<br>~~my~~<br>~~|~~|**2K**<br>**steps**<br>~~myoe~~<br>|**2K**<br>**steps**<br>~~oe~~<br>|**8K**<br>**steps**<br>~~se~~<br><br>~~oo~~|**8K**<br>**steps**<br>~~8~~<br><br>~~oo~~<br>~~en~~|**8K**<br>**steps**<br>~~8~~<br><br>~~en~~|**8K**<br>**steps**<br>~~a~~<br>|
|**DM Area capacity**<br>~~my~~<br>~~|Bo~~<br><br>~~Dy~~|**2K**<br>**words**<br>~~my oe~~<br>~~Bo~~<br><br>~~Dy~~|**2K**<br>**words**<br>~~oe~~<br>~~Bo~~<br>|**8K**<br>**words**<br>~~se~~<br>~~Bo~~<br>~~oo~~<br>|**8K**<br>**words**<br>~~8~~<br>~~Bo~~<br>~~oo~~<br>~~en~~<br>|**8K**<br>**words**<br>~~8~~<br>~~Bo~~<br>~~en~~<br>|**8K**<br>**words**<br>~~a~~<br>~~Bo~~<br>~~a~~|
|**USB port**<br>~~|~~<br>~~Mmmaoes8ose~~<br>~~Dy~~<br>~~_~~|**USB**<br><br>~~Mmmaoes8ose~~<br>~~Dy-~~|**USB**<br><br>~~Mmmaoes8ose~~<br>~~-~~|**USB**<br><br>~~oo~~<br>~~Mmmaoes8ose~~<br>~~8s~~|**USB**<br><br>~~oo~~<br>~~en~~<br>~~Mmmaoes8ose~~<br>~~owe~~|**USB**<br><br>~~en~~<br>~~Mmmaoes8ose~~<br>~~owe~~|**USB**<br><br>~~Mmmaoes8osea~~<br>~~owea~~|
|**Built-in Serial port**<br><br>~~Dy~~<br>~~_~~|~~Dy-~~|~~-~~|**RS-**<br>**232C**<br><br>~~8s~~|**RS-**<br>**485**<br>**RS-**<br>**232C**<br><br>~~owe~~|**RS-**<br>**232C**<br><br>~~owe~~|**RS-**<br>**232C**<br>~~a~~<br>~~owea~~|
|**Option Board *1**<br><br>~~_~~<br>|~~-~~<br>~~-~~|~~-~~<br>~~a~~<br>~~-~~|~~8s ~~<br>~~a~~<br>~~es~~|~~owe~~<br>~~a~~<br>~~8s~~|**RS-**<br>**232C**<br>**RS-422A**<br>**RS-485**<br>**Ether**<br>**net**<br>**Analog**<br>~~owe~~<br>~~a~~<br>a~~e~~<br>~~#e~~|**RS-**<br>**232C**<br>**RS-422A**<br>**RS-485**<br>**Ether**<br>**net**<br>**Analog**<br>~~owea~~<br>~~a~~<br>o~~o~~<br>~~a~~|
|**Battery *2**<br>**(Optional)**<br>~~ma~~<br>|~~ma-~~<br>~~-~~|~~-~~<br>~~-~~|**Battery**<br>~~es~~<br>~~ise~~|**Battery**<br>~~8s~~<br>~~8~~|**Battery**<br>~~#e~~<br>~~#8~~|**Battery**<br>~~a~~<br>~~a~~|
|**Clock**<br><br>~~ma~~<br>~~mS~~|~~-~~<br>~~ma-~~<br>~~mS~~|~~-~~<br>~~-~~<br>~~co~~|**Clock**<br>~~es~~<br>~~ise~~<br>~~**88**~~|**Clock**<br>~~8s~~<br>~~8~~<br>~~**8**~~|**Clock**<br>~~#e~~<br>~~#8~~<br>~~8G~~|**Clock**<br>~~a~~<br>~~a~~<br>~~**8**G~~|
|**High-speed**<br>**counters**<br>**(Single-phase)**<br><br>~~myo~~<br>~~mS~~|**10kHz**<br>**×6**<br>~~-~~<br>~~myo~~<br>~~mSco~~|**10kHz**<br>**×6**<br>~~-~~<br>~~myo~~<br>~~co~~<br>~~0~~|**10kHz**<br>**×4**<br>**100kHz**<br>**×2**<br>~~ise~~<br>~~myo~~<br>~~**88**~~|**10kHz**<br>**×4**<br>**100kHz**<br>**×2**<br>~~8~~<br>~~myo~~<br>~~**8**~~|**10kHz**<br>**×4**<br>**100kHz**<br>**×2**<br>~~#8~~<br>~~myo~~<br>~~8G~~<br>~~Be~~|**10kHz**<br>**×4**<br>**100kHz**<br>**×2**<br>~~a~~<br>~~myo~~<br>~~**8**G~~|
|**High-speed**<br>**counters**<br>**(Differential Phase)**<br>~~mS~~<br>|**5kHz**<br>**×2**<br>~~mSco~~<br>~~-~~|**5kHz**<br>**×2**<br>~~co~~<br>~~0~~<br>~~-~~<br>~~ise~~|**5kHz**<br>**×1**<br>**50kHz**<br>**×1**<br>~~**88**~~<br>~~ise~~|**5kHz**<br>**×1**<br>**50kHz**<br>**×1**<br>~~**8**~~<br>~~8~~|**5kHz**<br>**×1**<br>**50kHz**<br>**×1**<br>~~8G~~<br>~~Be~~<br>~~8~~|**5kHz**<br>**×1**<br>**50kHz**<br>**×1**<br>~~**8**G~~<br>~~a~~|
|**Pulse outputs**<br>**(transistor output type)**<br>~~mS~~<br>~~ma~~<br>~~my~~|~~mS co~~<br>~~ma-~~<br>~~my~~|~~co ~~<br>~~0~~<br>~~-~~<br>~~ise~~<br>~~-g®-~~|**100kHz**<br>**×2**<br> ~~**88** ~~<br>~~ise~~<br>~~-g®-~~|**100kHz**<br>**×2**<br> ~~**8** ~~<br>~~8~~<br>~~-~~|**100kHz**<br>**×2**<br> ~~8G ~~<br>~~Be~~<br>~~8~~<br>~~#8~~|**100kHz**<br>**×2**<br> ~~**8**G~~<br>~~a~~<br>~~a~~|
|**Analog adjusters**<br><br>~~my~~|~~-~~<br>~~my~~|**Analog**<br>**adjusters**<br>~~-~~<br>~~ise~~<br>~~-g®-~~|~~ise~~<br>~~-g®-~~|~~8~~<br>~~-~~|**Analog**<br>**adjusters**<br>~~8~~<br>~~#8~~|**Analog**<br>**adjusters**<br>~~a~~<br>~~a~~|
|**Built-in analog**<br>~~my~~<br>~~m-~~|~~my~~<br>~~m-~~|~~-g®-~~<br>-|~~-g®-~~<br>ts|~~-~~<br>+|~~#8~~<br>-|**AD 2**<br>**DA 1**<br>~~a~~<br>@|



- *1. For CP1E N30/40/60 or NA20 CPU Units only. 

*2. The CP1W-BAT01 Battery (sold separately) can be mounted 

11 

## **Ordering information** 

## **International Standards** 

The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, KC: KC Registration, and CE: EU Directives. Contact your OMRON representative for further details and applicable conditions for these standards. 

## **Application models** 

**■Renewal type (N□□S1-type) CP1E CPU Units: Built-in 3 ports** 

|Product name||||Specifications|Specifications|Specifications|Model|Standards|
|---|---|---|---|---|---|---|---|---|
||Power Supply|Inputs|Outputs|Output type|Program capacity|Data memorycapacity|||
|N□□S1-type<br>with 30 I/O Points|100 to 240 VAC|18|12|Relay|8K steps|8K words|**CP1E-N30S1DR-A**|CE, KC|
||24VDC|||Transistor (sinking)|||**CP1E-N30S1DT-D**||
|||||Transistor(sourcing)|||**CP1E-N30S1DT1-D**||
|N□□S1-type<br>with 40 I/O Points|100 to 240 VAC|24|16|Relay|||**CP1E-N40S1DR-A**||
||24VDC|||Transistor (sinking)|||**CP1E-N40S1DT-D**||
|||||Transistor(sourcing)|||**CP1E-N40S1DT1-D**||
|N□□S1-type<br>with 60 I/O Points|100 to 240 VAC|36|24|Relay|||**CP1E-N60S1DR-A**||
||24VDC|||Transistor (sinking)|||**CP1E-N60S1DT-D**||
|||||Transistor (sourcing)|||**CP1E-N60S1DT1-D**||



## **■Renewal type (N□□S-type) CP1E CPU Units: Built-in 2 ports** 

|Product name||||Specifications|Specifications|Specifications|Model|Standards|
|---|---|---|---|---|---|---|---|---|
||Power Supply|Inputs|Outputs|Output type|Program capacity|Data memorycapacity|||
|N□□S-type<br>with 30 I/O Points|100 to 240 VAC|18|12|Relay|8K steps|8K words|**CP1E-N30SDR-A**|CE|
||24VDC|||Transistor (sinking)|||**CP1E-N30SDT-D**||
|||||Transistor(sourcing)|||**CP1E-N30SDT1-D**||
|N□□S-type<br>with 40 I/O Points|100 to 240 VAC|24|16|Relay|||**CP1E-N40SDR-A**||
||24VDC|||Transistor (sinking)|||**CP1E-N40SDT-D**||
|||||Transistor(sourcing)|||**CP1E-N40SDT1-D**||
|N□□S-type<br>with 60 I/O Points|100 to 240 VAC|36|24|Relay|||**CP1E-N60SDR-A**||
||24VDC|||Transistor (sinking)|||**CP1E-N60SDT-D**||
|||||Transistor (sourcing)|||**CP1E-N60SDT1-D**||



**■Normal type (N/NA□□-type) CP1E CPU Units** 

|Product name||||Specifications|Specifications|Specifications|Model|Standards|
|---|---|---|---|---|---|---|---|---|
||Power Supply|Inputs|Outputs|Output type|Program capacity|Data memorycapacity|||
|N□□-type<br>with 14 I/O Points|100 to 240 VAC|8|6|Relay|8K steps|8K words|**CP1E-N14DR-A**|UC1,<br>N, L,<br>CE, KC|
|||||Transistor (sinking)|||**CP1E-N14DT-A**||
|||||Transistor (sourcing)|||**CP1E-N14DT1-A**||
||24VDC|||Relay|||**CP1E-N14DR-D**||
|||||Transistor (sinking)|||**CP1E-N14DT-D**||
|||||Transistor (sourcing)|||**CP1E-N14DT1-D**||
|N□□-type<br>with 20 I/O Points|100 to 240 VAC|12|8|Relay|8K steps|8K words|**CP1E-N20DR-A**||
|||||Transistor (sinking)|||**CP1E-N20DT-A**||
|||||Transistor (sourcing)|||**CP1E-N20DT1-A**||
||24VDC|||Relay|||**CP1E-N20DR-D**||
|||||Transistor (sinking)|||**CP1E-N20DT-D**||
|||||Transistor (sourcing)|||**CP1E-N20DT1-D**||
|N□□-type<br>with 30 I/O Points|100 to 240 VAC|18|12|Relay|8K steps|8K words|**CP1E-N30DR-A**||
|||||Transistor (sinking)|||**CP1E-N30DT-A**||
|||||Transistor (sourcing)|||**CP1E-N30DT1-A**||
||24VDC|||Relay|||**CP1E-N30DR-D**||
|||||Transistor (sinking)|||**CP1E-N30DT-D**||
|||||Transistor (sourcing)|||**CP1E-N30DT1-D**||
|N□□-type<br>with 40 I/O Points|100 to 240 VAC|24|16|Relay|8K steps|8K words|**CP1E-N40DR-A**||
|||||Transistor (sinking)|||**CP1E-N40DT-A**||
|||||Transistor (sourcing)|||**CP1E-N40DT1-A**||
||24VDC|||Relay|||**CP1E-N40DR-D**||
|||||Transistor (sinking)|||**CP1E-N40DT-D**||
|||||Transistor (sourcing)|||**CP1E-N40DT1-D**||
|N□□-type<br>with 60 I/O Points|100 to 240 VAC|36|24|Relay|8K steps|8K words|**CP1E-N60DR-A**||
|||||Transistor (sinking)|||**CP1E-N60DT-A**||
|||||Transistor (sourcing)|||**CP1E-N60DT1-A**||
||24VDC|||Relay|||**CP1E-N60DR-D**||
|||||Transistor (sinking)|||**CP1E-N60DT-D**||
|||||Transistor (sourcing)|||**CP1E-N60DT1-D**||
|NA-type<br>with 20 I/O Points<br>(Billt-in analog)|100 to 240 VAC|12<br>(Built-in<br>analog<br>inputs : 2)|8<br>(Built-in<br>analog<br>outputs : 1)|Relay|8K steps|8K words|**CP1E-NA20DR-A**||
||24VDC|||Transistor (sinking)|||**CP1E-NA20DT-D**||
|||||Transistor(sourcing)<br>|||**CP1E-NA20DT1-D**||



12 

## **Basic models** 

## **■Renewal type (E□□S-type) CP1E CPU Units** 

|Product name||Specifications|Specifications|Specifications|Specifications|Specifications|Model|Standards|
|---|---|---|---|---|---|---|---|---|
||Power Supply|Inputs|Outputs|Output type|Program capacity|Data memorycapacity|||
|E□□S-type<br>with 14 I/O Points|100 to 240 VAC|8|6|Relay|2K steps|2K words|**CP1E-E14SDR-A**|CE, KC|
|E□□S-type<br>with 20 I/O Points||12|8|Relay|||**CP1E-E20SDR-A**||
|E□□S-type<br>with 30 I/O Points||18|12|Relay|||**CP1E-E30SDR-A**||
|E□□S-type<br>with 40 I/O Points||24|16|Relay|||**CP1E-E40SDR-A**||
|E□□S-type<br>with 60 I/O Points||36|24|Relay|||**CP1E-E60SDR-A**||



## **■Normal type (E□□-type) CP1E CPU Units** 

|Product name||||Specifications|Specifications|Specifications|Model|Standards|
|---|---|---|---|---|---|---|---|---|
||Power Supply|Inputs|Outputs|Output type|Program capacity|Data memorycapacity|||
|E□□-type<br>with 10 I/O Points|100 to 240 VAC|6|4|Relay|2K steps|2K words|**CP1E-E10DR-A**|UC1,<br>N, L,<br>CE, KC|
|||||Transistor (sinking)|||**CP1E-E10DT-A**||
|||||Transistor (sourcing)|||**CP1E-E10DT1-A**||
||24VDC|||Relay|||**CP1E-E10DR-D**||
|||||Transistor (sinking)|||**CP1E-E10DT-D**||
|||||Transistor(sourcing)|||**CP1E-E10DT1-D**||
|E□□-type<br>with 14 I/O Points|100 to 240 VAC|8|6|Relay|||**CP1E-E14DR-A**||
|E□□-type<br>with 20 I/O Points||12|8|Relay|||**CP1E-E20DR-A**||
|E□□-type<br>with 30 I/O Points||18|12|Relay|||**CP1E-E30DR-A**||
|E□□-type<br>with 40 I/O Points||24|16|Relay|||**CP1E-E40DR-A**||



## **Optional Products** 

**■Battery Set** 

|Product name|Specifications|Model|Standards|
|---|---|---|---|
|Battery Set|For N□□/NA-type CP1E CPU Units<br>Note: Mount a Battery to an N□□/NA-type CP1E CPU Unit if the data in the following areas must be<br>backed up for power interruptions.<br> DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C),<br> Counter Present Values (C), Auxiliary Area (A) , and Clock Function.(Use batteries within two years of manufacture.)|**CP1W-BAT01**||
|**■Option Boards(for CP1E N30/40/60 or NA20 CPU Units)**||||
|Product name|Specifications|Model|Standards|
|RS-232C<br>Option Board|One RS-232C Option Board can be mounted to the Option Board slot.|**CP1W-CIF01**|UC1,<br>N, L,<br>CE, KC|
|RS-422A/485<br>Option Board|One RS-422A/485 Option Board can be mounted to the Option Board slot.|**CP1W-CIF11**||
|RS-422A/485<br>Isolated-type<br>Option Board|One RS-422A/485 Option Board can be mounted to the Option Board slot.|**CP1W-CIF12-V1**||
|Ethernet<br>Option Board|One Ethernet Option Board can be mounted to the Option Board slot. CP1E CPU Units are supported by<br>CP1W-CIF41 version 2.0 or later. When using CP1W-CIF41, CX-Programmer version 9.12 or higher is required.|**CP1W-CIF41**||
|Analog Input<br>Option Board|Can be mounted in CPU Unit Option Board slot.<br>2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA (Resolution:1/2000).|**CP1W-ADB21***||
|Analog Output<br>Option Board|Can be mounted in CPU Unit Option Board slot.<br>2 analog outputs. 0-10V (Resolution:1/4000).|**CP1W-DAB21V***||
|Analog I/O<br>Option Board|Can be mounted in CPU Unit Option Board slot.<br>2 analog inputs. 0-10V(Resolution:1/4000), 0-20mA(Resolution:1/2000).<br>2 analog outputs. 0-10V (Resolution:1/4000).|**CP1W-MAB221***||



Note: It is not possible to use a CP-series Ethernet Option Board version 1.0 (CP1W-CIF41), LCD Option Board (CP1W-DAM01), or Memory Card (CP1W-ME05M) with a CP1E CPU Unit. 

*. For CP1E CPU Unit version 1.2 or later 

13 

## **Ordering information** 

## **Optional Products** 

**■Expansion I/O Units and Expansion Units (for CP1E N30/40/60 or NA20 CPU Units)** 

|Unit type|Product name|Inputs|Outputs|Specifications||Model|Standards|
|---|---|---|---|---|---|---|---|
|CP1W<br>Expansion I/O<br>Units|Input Unit|8||DC24V Input||**CP1W-8ED**|U, C, N,<br>L, CE, KC|
||Output Units||8|Relay||**CP1W-8ER**||
|||||Transistor(sinking)||**CP1W-8ET**||
|||||Transistor(sourcing)||**CP1W-8ET1**||
||||16|Relay||**CP1W-16ER**|N, L, CE, KC|
|||||Transistor(sinking)||**CP1W-16ET**||
|||||Transistor(sourcing)||**CP1W-16ET1**||
||||32|Relay||**CP1W-32ER**||
|||||Transistor(sinking)||**CP1W-32ET**||
|||||Transistor(sourcing)||**CP1W-32ET1**||
||I/O Units|12|8|Relay||**CP1W-20EDR1**|U, C, N,<br>L, CE, KC|
|||||Transistor(sinking)||**CP1W-20EDT**||
|||||Transistor(sourcing)||**CP1W-20EDT1**||
|||24|16|Relay||**CP1W-40EDR**|N, L, CE, KC|
|||||Transistor(sinking)||**CP1W-40EDT**||
|||||Transistor(sourcing)||**CP1W-40EDT1**||
|CP1W<br>Expansion<br>Units|Analog Input<br>Unit|4CH||Input range:<br>0 to 5 V, 1 to 5 V, 0 to 10 V,<br>±10 V, 0 to 20 mA, or 4 to 20 mA.|Resolution: 1/6000|**CP1W-AD041**|UC1, N, L, CE, KC|
||||||Resolution: 1/12000|**CP1W-AD042**|UC1, N, CE, KC|
||Analog Output<br>Unit||2CH|Output range:<br>1 to 5 V, 0 to 10 V, ±10 V,<br>0 to 20 mA, or 4 to 20 mA.|Resolution: 1/6000|**CP1W-DA021**|UC1, N,<br>L, CE, KC|
||||||Resolution: 1/6000|**CP1W-DA041**||
||||4CH|||||
||||||Resolution: 1/12000|**CP1W-DA042**|UC1, N, CE, KC|
||Analog I/O<br>Unit|2CH|1CH|Input range:<br>Output range:<br>0 to 5 V, 1 to 5 V, 0 to 10 V,<br>±10 V, 0 to 20 mA, or 4 to 20 mA.<br>1 to 5 V, 0 to 10 V, ±10 V,<br>0 to 20 mA, or 4 to 20 mA.|Resolution: 1/6000|**CP1W-MAD11**|UC1, N, L, CE, KC|
|||4CH|2CH||Resolution: 1/12000|**CP1W-MAD42**|UC1, N,<br>CE, KC|
|||4CH|4CH||Resolution: 1/12000|**CP1W-MAD44**||
||Temperature<br>Sensor Unit|2CH||Sensor type: Thermocouple(J or K)||**CP1W-TS001**|UC1, N,<br>L, CE, KC|
|||4CH||Sensor type: Thermocouple(J or K)||**CP1W-TS002**||
|||2CH||Sensor type: Platinum resistance thermometer(Pt100 or JPt100)||**CP1W-TS101**||
|||4CH||Sensor type: Platinum resistance thermometer(Pt100 or JPt100)||**CP1W-TS102**||
|||4CH||Sensor type: Thermocouple (J or K)<br>2 analog inputs*<br>Input range: 1 to 5 V, 0 to 10 V, 4 to 20 mA.|Resolution: 1/12000|**CP1W-TS003**|UC1, N,<br>CE, KC|
|||12CH||Sensor type: Thermocouple(J or K)||**CP1W-TS004**||
||CompoBus/S<br>I/O Link Unit|8|8|CompoBus/S slave||**CP1W-SRT21**|UC1, N,<br>L, CE, KC|
|I/O Connecting Cable||80 cm (for CP1W Expansion I/O Units and Expansion Units)<br>Only one I/O Connecting Cable can be used in each PLC.||||**CP1W-CN811**|UC1, N,<br>L, CE|



Note: An I/O Connecting Cable (approx. 6 cm) for horizontal connection is provided with CP1W Expansion I/O Units and Expansion Units. 

* Only last two channels can be used as analog input. 

## **Programming Devices** 

**■Support Software** 

|Product name|Specifications|||Model|Standards|
|---|---|---|---|---|---|
|||Number of<br>licenses|Media|||
|FA Integrated<br>Tool Package<br>CX-One<br>Lite Ver.4.□|CX-One Lite is a subset of the complete CX-One package that provides only the Support Software<br>required for micro PLC applications. CX-One Lite runs on the following OS.<br>OS: Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1<br>(32-bit/64-bit version) / Windows 10 (32-bit/64-bit version)<br>CX-One Lite Ver. 4.□includes Micro PLC Edition CXProgrammer Ver.9.□.|1 license<br>|DVD|**CXONE-LT01D-V4**||
|FA Integrated<br>Tool Package<br>CX-One<br>Ver.4.□|CX-One is a comprehensive software package that integrates Support Software for OMRON PLCs<br>and components. CX-One runs on the following OS.<br>OS: Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1<br>(32-bit/64-bit version) / Windows 10 (32-bit/64-bit version)<br>CX-One Ver. 4.□includes CX-Programmer Ver. 9.□.|1 license *|DVD|**CXONE-AL01D-V4**||



Note: 1.CP1E-E60SDR-A CPU Units are supported by CX-Programmer version 9.42 or higher. When Micro PLC Edition CX-Programmer is used, you need version 9.42 or higher. The E20/30/40(S), N20/30/40(S □ ) CPU Units are supported by CX-Programmer version 8.2 or higher. 

- The E10/14(S), N14/60(S □ ), and NA20 CPU Units are supported by CX-Programmer version 9.03 or higher. When Micro PLC Edition CX-Programmer is used, you need version 9.03 or higher. 

- 2.When using CP1W-CIF41, CX-Programmer version 9. π12 or higher is required. N30/40/60, NA20 only. 

- 3.The CX-One and CX-One Lite cannot be simultaneously installed on the same computer. 

- Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One. 

14 

## **Terms and Conditions Agreement** 

## **Read and understand this catalog.** 

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. 

## **Warranties.** 

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. 

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. 

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 

See http://www.omron.com/global/ or contact your Omron representative for published information. 

## **Limitation on Liability; Etc.** 

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. 

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 

## **Suitability of Use.** 

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. 

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 

## **Programmable Products.** 

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. 

## **Performance Data.** 

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. 

## **Change in Specifications.** 

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. 

## **Errors and Omissions.** 

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 

## **Note: Do not use this document to operate the Unit.** 

**OMRON Corporation      Industrial Automation Company Authorized Distributor: Tokyo, JAPAN** 

**Contact:  www.ia.omron.com** 

_**Regional Headquarters**_ **OMRON EUROPE B.V. OMRON ELECTRONICS LLC** Wegalaan 67-69, 2132 JD Hoofddorp 2895 Greenspoint Parkway, Suite 200 The Netherlands Hoffman Estates, IL 60169 U.S.A Tel: (31)2356-81-300/Fax: (31)2356-81-388 Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 

**OMRON ASIA PACIFIC PTE. LTD. OMRON (CHINA) CO., LTD.** No. 438A Alexandra Road # 05-05/08 (Lobby 2), Room 2211, Bank of China Tower, Alexandra Technopark, 200 Yin Cheng Zhong Road, Singapore 119967 PuDong New Area, Shanghai, 200120, China Tel: (65) 6835-3011/Fax: (65) 6835-2711 Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 

© OMRON Corporation 2009-2020  All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. **CSM_14_6 Cat. No. P060-E1-12** 0820 (0309)