CO1100-7.3728

**THROUGH HOLE CLOCK OSCILLATORS - TTL COMPATIBLE** 

_**SERIES CO1 AND CO13**_ 

## **FEATURES** 

STANDARD 8 AND 14 PIN DIP PACKAGE 

TOLERANCE AND STABILITY TO ± 25 PPM LOW COST AVAILABLE IN 3.3 VOLT **SPECIFICATIONS** SERIES CO1 CO13 PACKAGE 14 PIN DIP 8 PIN  DIP FREQUENCY RANGE 500.00 KHz TO 125.00 MHz 500.00 KHz TO 125.00 MHz CO1100 : ±100 ppm CO13100 : ±100 ppm FREQUENCY STABILITY† CO1050 : ±50 ppm CO13050 : ±50 ppm CO1025 : ±25 ppm CO13025 : ±25 ppm 0° C TO +70° C STANDARD 0° C TO +70° C STANDARD OPERATING TEMPERATURE RANGE -40° C TO +85° C EXTENDED -40° C TO +85° C EXTENDED ~~==~~ STORAGE TEMPERATURE RANGE -55° C TO +125° C -55° C TO +125° C ~~—~~ VOLTAGE†† +5 VDC ±0.5 VDC +5 VDC ±0.5 VDC 500.00 KHz TO 2.999 MHz: 30 mA 500.00 KHz TO 2.999 MHz: 30 mA INPUT 3.00 MHz TO 31.999 MHz: 50 mA 3.00 MHz TO 31.999 MHz: 50 mA CURRENT (MAX) 32.00 MHz TO 79.999 MHz: 70 mA 32.00 MHz TO 79.999 MHz: 70 mA 80.00 MHz TO 125.00 MHz: 80 mA 80.00 MHz TO 125.00 MHz: 80 mA ~~a~~ SYMMETRY 40 TO 60% NORMAL 40 TO 60% NORMAL (AT 1.4 VDC LEVEL) 45 TO 55% TIGHT 45 TO 55% TIGHT UNDER 9 MHz : ±15 ns MAX UNDER 9 MHz : ±15 ns MAX RISE AND FALL TIME 9 MHz TO 32 MHz : ±10 ns MAX 9 MHz TO 32 MHz : ±10 ns MAX OUTPUT (0.4 - 2.4 VDC) 32 MHz TO 80 MHz : ±6 ns MAX 32 MHz TO 80 MHz : ±6 ns MAX 80 MHz TO 125 MHz : ±4 ns MAX 80 MHz TO 125 MHz : ±4 ns MAX LOGIC "0" LEVEL +0.5 V MAX, SINK TO 16 mA +0.5 V MAX, SINK TO 16 mA LOGIC "1" LEVEL +2.4 V MIN, SOURCE 0.4 mA +2.4 V MIN, SOURCE 0.4 mA = ~~sS=]}~~ LOAD††† 1 TO 10 TTL STANDARD 1 TO 10 TTL STANDARD † FREQUENCY STABILITY INCLUSIVE OF ROOM TOLERANCE , FREQUENCY STABILITY OVER TEMPERATURE,  10% POWER SUPPLY VARIATION, AGING, SHOCK, AND VIBRATION †† +3.3 VOLT VERSION IS AVAILABLE. CONSULT RA MI FOR SPECIFICATIONS 

††† OUTPUT LOADS ALSO AVAILABLE AT 15 pF, 30 pF AND 50 pF. CONSULT RA M I FOR SPECIFICATIONS 

**ENVIRONMENTAL AND TECHNICAL CONDITIONS OUTPUT WAVEFORM ENVIRONMENTAL** TEMPERATURE CYCLE MIL-STD 883, METHOD 1010, 10 CYCLES -20° C TO 85° C tf tr SHOCK MIL-STD-202, METHOD 213, TEST CONDITION C VCC VIBRATION MIL-STD-202, METHOD 204, TEST CONDITION A RESISTANCE TO SOLDERING HEAT MIL-STD-202, METHOD 210, TEST CONDITION B "1" LEVEL +2.5 VDC HUMIDITY 85% RELATIVE HUMIDITY AT 85° C 250 HOURS +1.5 VDC **MECHANICAL** GROSS LEAK TEST MIL-STD-883, METHOD 1014, TEST CONDITION C "0" LEVEL +0.5 VDC 0 VDC FINE LEAK TEST MIL-STD-883, METHOD 1014, TEST CONDITION A t TERMINAL STRENGTH MIL-STD-202, METHOD 211, TEST CONDITION A AND C T MARKING INK EPOXY, HEAT CURED. MOISTURE RESISTANCE MIL-STD 202, METHOD 106, OMIT STEP 7B SOLDERABILITY MIL-STD-202, METHOD 208, 95% COVERAGE SOLVENT RESISTANCE MIL-STD-202, METHOD 2002, METHOD 215 ~~ae~~ s **PART NUMBERING SYSTEM** FREQUENCY EXTENDED SERIES FREQUENCY SYMMETRY OPTIONS STABILITY TEMPERATURE 100 ±100 PPM - - - - TR TAPE AND REEL* CO1 (14 PIN DIP) 050 ±50 PPM IN MHz EXT T TIGHT SYMMETRY GW GULL WING CO13 (8 PIN DIP) 025 ±25 PPM 3.3 +3.3 V ~~AATFr ne~~ EXAMPLE: CO1100-20.000-EXT-T, CO13050-32.000-T-TR * Available for Gull Wing only **R AMI TECHNOLOGY 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-8000 Fax: 305-59 3-8487 e-mail: sales@ra mitechnology .com web: www.ramitechnology.com** 

**==> picture [557 x 696] intentionally omitted <==**

**----- Start of picture text -----**<br>
THROUGH HOLE CLOCK OSCILLATORS-TTL COMPATIBLE<br>RamiTecHNLOgy, ——ss—“‘“‘;W Ct<br>SERIES CO1 AND CO13<br>| TEST CIRCUIT<br>FREQUENCY<br>STANDARD<br>|<br>R = SEE TABLE FREQUENCY<br>COUNTER<br>D<br>A<br>OSCILLOSCOPE<br>14(8) 8(5)<br>VCC OUT D<br>+ V D=1N914<br>POWER<br>.01µF SUPPLY OSCILLATOR D C=15 pF MAX<br>+5 VDC<br>N/C GND D<br>1 7(4) LOADS RESISTANCE (R)<br>10 390 OHM<br>5 750 OHM<br>2 1800 OHM<br>1 3900 OHM<br>==<br>Pe r es<br>OUTLINE DRAWINGS<br>CO1 PACKAGE (FULL SIZE 14 PIN DIP) Scale none  Dimension in [mm] inch CO13 PACKAGE (HALF SIZE 8 PIN DIP) Scale none  Dimension in [mm] inch<br>COLORED DOT<br>INDICATES<br>PIN 1 LOCATION MARKING MARKING<br>AREA AREA<br>COLORED DOT<br>Y._ a INDICATES<br>PIN 1 LOCATION<br>0.46 ± .08 DIA<br>.018 ± .003 DIA<br>te L<br>0.46 ± .08 DIA<br>.018 ± .003 DIA<br>7.62 ± .13<br>15.24 ± .13 .300 ± .005<br>PIN 1 .600 ± .005 PIN 7<br>= PIN 1 PIN 4<br>PIN 14 12.19 PIN 8<br>ae .480 oh PIN 8 13.21 MAX PIN 5<br>20.80 MAX .520 MAX<br>PIN CONNECTION PIN CONNECTION<br>PIN FUNCTION NOTE: PIN 7 IS INTERNAL PIN FUNCTION NOTE: PIN 4 IS INTERNAL<br>1 N/C             TO HEADER 1 N/C             TO HEADER<br>7 GROUND 4 GROUND<br>8 OUTPUT 5 OUTPUT<br>14 VCC 8 VCC<br>— PACKAGING — =<br>.819 MAX<br>6.35 MAX<br>5.08 MAX .200 MAX 5.08 MAX .200 MAX<br>.250 MIN<br>± .08<br>0.79 .031 ± .003<br>.250 MAX<br>7.62 ± .13 .300 ± .005 13.21 MAX .520 MAX<br>± .08<br>0.79 .031 ± .003<br>6.35 MIN<br>4.57 .180<br>13.20 MAX .519 MAX 7.62 ± .13 .300 ± .005<br>**----- End of picture text -----**<br>


**PACKAGING** 14 PIN DIP: 25 PIECES PER ELECTROSTATIC TUBE 8 PIN DIP: 40 PIECES PER ELECTROSTATIC TUBE 

**R AMI TECHNOLOGY 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-8000 Fax: 305-59 3-8487 e-mail: sales@ra mitechnology .com web: www.ramitechnology.com**