CMD60125

**Panel Mount** _DataSheet_ 

## _**CMD / CMA60 Series**_ 

- Ratings from 25A to 125A @ 48-660 VAC 

- SCR output for heavy industrial loads 

- AC or DC control 

- LED input status indicator 

- Zero-crossing (resistive loads) or random-fire (inductive loads) output 

- IP20 touch-safe housing 

- Standard box-clamp connections 

## **PRODUCT SELECTION** 

|**Control Voltage**|**25A**|**50A**|**75A**|**90A**|**110A**|**125A**|
|---|---|---|---|---|---|---|
|4-32 VDC|CMD6025|CMD6050|CMD6075|CMD6090|CMD60110|CMD60125|
|90-140 VAC|CMA6025|CMA6050|CMA6075|CMA6090|CMA60110|CMA60125|
|18-36 VAC|CMA6025E|CMA6050E|CMA6075E|CMA6090|CMA60110E|CMA60125E|



## **AVAILABLE OPTIONS** 

**==> picture [104 x 46] intentionally omitted <==**

**----- Start of picture text -----**<br>
Control Voltage<br>A:  AC (90-140V)<br>Series D:  DC (4-32V)<br>CM A<br>**----- End of picture text -----**<br>


## **Load Current** 

**25:** 5 Amps **50:** 10 Amps **75:** 75 Amps **90:** 90 Amps **110:** 110 Amps **125:** 125 Amps 

**Blank:** No Internal Overvoltage Protection **P:** Internal Overvoltage Protection 

**Input Range Switching Mode Operating Voltage Blank:** Standard Input **Blank:** Zero cross Turn-on Required for valid part number **60:** 48-660 VAC **E:** 18-36 VAC **-10:** Random Turn-On 

@ For options only and not required for valid part number 

## **OUTPUT SPECIFICATIONS[(1)]** 

|**Description**|**25A**|**50A**|**75A**|**90A**|**110A**|**125A**|
|---|---|---|---|---|---|---|
|Operating Voltage (47-63Hz) [Vrms]|48-660|48-660|48-660|48-660|48-660|48-660|
|Transient Overvoltage [Vpk]|1200|1200|1200|1200|1200|1200|
|Maximum Off-State Leakage Current @ Rated Voltage [mA]|1.0|1.0|1.0|1.0|1.0|1.0|
|Minimum Off-State dv/dt @ Maximum Rated Voltage [V/μsec](2)|500|500|500|500|500|500|
|Maximum Load Current [Arms](3)|25|50|75|90|110|125|
|Minimum Load Current [Arms]|0.15|0.15|0.25|0.25|0.25|0.025|
|Maximum Surge Current (50/60Hz, 1 Cycle) [Apk]|239/250|597/625|954/1000|1145/1200|1432/1500|1670/1750|
|Maximum On-State Voltage Drop @ Rated Current [Vpk]|1.6|1.6|1.6|1.6|1.6|1.6|
|Thermal Resistance Junction to Case (Rjc) [°C/W]|1.02|0.63|0.31|0.28|0.25|0.22|
|Maximum I²t for Fusing (50/60Hz, 1/2 cycle) [A²sec]|285/259|1779/1621|4555/4150|6560/5976|10249/9338|13950/12709|
|Minimum Power Factor (with Maximum Load)|0.5|0.5|0.5|0.5|0.5|0.5|



FDE-07-01 REV. A 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **INPUT SPECIFICATIONS[(1)]** 

|**Description**|**CMD**|**CMA**|
|---|---|---|
|Control Voltage Range|3-32 VDC|90-140 Vrms|
|Maximum Reverse Voltage|32 VDC|-|
|Maximum Turn-On Voltage|3.0 VDC|90 Vrms|
|Minimum Turn-Off  Voltage|1.0VDC|10 Vrms|
|Typical Input Current @ max turn-on voltage|30mA(5)|-|
|Nominal Input Impedance [Ohms]|17 mA @ 5 VDC|15 mA @ 120 Vrms|
|Maximum Turn-On Time [msec](4)|1/2Cycle|10|
|Maximum Turn-Off Time [msec]|1/2Cycle|40|



## **GENERAL SPECIFICATIONS** 

|**Description**|**Parameters**|
|---|---|
|Dielectric Strength, Input/Output/Base (50/60Hz)|4000 Vrms|
|Minimum Insulation Resistance(@ 500 V DC)|109Ohms|
|Maximum Capacitance, Input/Output|8pF|
|Ambient Operating Temperature Range|-40ºC to 80ºC|
|Ambient Storage Temperature Range|-40ºC to 125ºC|
|Status Indicating Display|Green LED|
|Weight (typical)|3.0 oz (86.5 g)|
|Encapsulation|Thermally conductive Epoxy|
|Terminals|Cage type|
|Maximum Wire Size-Output:|AWG 8 (3.8mm)|
|Maximum Wire Size-Input:|AWG 12 (2.5mm)|
|Recommended Terminal Screw Torque Range:|Output: 10-15 in lb (1.1-1.7 Nm)|
||Input: 5-6 in lb (0.6-0.7 Nm)|



## **GENERAL NOTES** 

- 1) 

- 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 

- 3) HEAT SINKING REQUIRED, FOR DERATING curves see page 2. 

- 4) Turn-on time for DC control random turn-on versions is 0.02msec 

- 5) Input circuitry incorporates active current limiter. 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

## **Panel Mount** _DataSheet_ 

## **THERMAL DERATE INFORMATION** 

**==> picture [519 x 242] intentionally omitted <==**

**----- Start of picture text -----**<br>
CURRENT DERATING CURVES<br>25A 50A 75A<br>30 95 60 90<br>1°C/W 1°C/W .5°C/W 90<br>25 3°C/W 2°C/W 100 1.5°C/W .5°C/W .3°C/W 95<br>20 40 3°C/W 100 60 1°C/W 100<br>15 110 110<br>110<br>10 20 30<br>NO HEATSINK<br>5 120 NO HEATSINK 120 120<br>0 0 0<br>5 10 15 20 25 20 40 60 80 10 20 30 40 50 20 40 60 80 15 30 45 60 75 20 40 60 80<br>Load Currect [Arms]   Max Ambient Temp. [°C] Load Currect [Arms]   Max Ambient Temp. [°C] Load Currect [Arms]   Max Ambient Temp. [°C]<br>90A 110A 125A<br>120 .5°C/W .2°C/W 90 160 .4°C/W 90 160 .4°C/W 90<br>.4°C/W 100 120 .5°C/W .2°C/W 120 .5°C/W .2°C/W<br>80 100 100<br>1°C/W 80 80<br>110 1°C/W 110 1°C/W 110<br>40<br>40 40<br>120 120 120<br>0 0 0<br>20 40 60 80 0 20 40 60 80 AN 30 60 90 120 0 20 40 [:] 60 80 ZAIN 30 60 90 120 0 20 40 60 80<br>Load Currect [Arms]   Max Ambient Temp. [°C] Load Currect [Arms]   Max Ambient Temp. [°C] Load Currect [Arms]   Max Ambient Temp. [°C]<br>Power Dissipation Base Plate Temp [°C] Power Dissipation Base Plate Temp [°C] Power Dissipation Base Plate Temp [°C]<br>Power Dissipation Base Plate Temp [°C] Power Dissipation Base Plate Temp [°C] Power Dissipation Base Plate Temp [°C]<br>**----- End of picture text -----**<br>


## **MECHANICAL SPECIFICATIONS** 

Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 

## **AGENCY APPROVALS** 

## **Agency Approvals** 

Designed in accordance with the requirements of IEC 62314 

E116949 E116950 LR 81689 

Rev.122220 ENC 21026 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /** 危险 

**HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI** 存在电击、 **ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA** 爆炸或电弧 **SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O** 闪烁危险 **EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH.** • Desconectar • Eteindre **EXPLOSION.** • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura this equipment. de trabajar avant de versorgt, bevor prima di lavorare 若不遵守这些说明， con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Vor dem • Verificare tutti covers before y colocar todas • Vérifier tous Drehen auf i collegamenti turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous Anschlüsse tutte le coperture el equipo. couverts en prima **Failure to follow** olace avant de überprüfen dell’accensione **these El** mettre sous und alle **instructions will incumplimiento** Abdeckungen **L'omissione di result in death de estas De non-suivi de** ersetzen. **queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen.** 

## **WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /** 警告 

**RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • •** Les panneaux latéraux du produit peuvent être **•** Die Seitenwände können heiß sein. Lassen Sie The product's side panels may be hot, allow the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. **•** Follow proper mounting instructions including toucher. **•** Beachten Sie die Montageanweisungen, torque values. **•** Respecter les consignes de montage, et **•** Führen Sie keine Flüssigkeiten oder **•** Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. **•** Ne pas laisser pénétrer de liquide ni de corps this product. étrangers à l'intérieur du produit. **Failure to follow these instructions can result in Le non-respect de cette directive peut entraîner,des lésions corporelles graves ou des Die Nichtbeachtung dieser Anweisung kannKörperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE RISCHIO DI DANNI MATERIALI E D'INVOLUCRO** 材料损坏和高温外壳的危险性 **SOBRECALENTAMIENTO DE LA UNIDAD CALDO** • **•** Los paneles laterales del producto pueden **•** I pannelli laterali dell'apparecchio possono 不要触碰。 产品的一侧面板可能很热，在其冷却前请 estar calientes. Esperar que el producto se enfríe antes de tocarlo. scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 **•** Respetar las instrucciones de montaje, y en prima di toccarlo. **•** Seguire le istruzioni di montaggio corrette. • 请勿让液体及其他异物进入本产品。 particular los pares de apretado. **•** No dejar que penetren líquidos o cuerpos **•** Non far entrare liquidi o oggetti estranei in questo apparecchio. extraños en el producto. **La mancata osservanza di questa precauzione può** 如不能正确执行这些操作说明， **Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o producirse graves lesiones, daños materiales. danni alle apparecchiature.** 极有可能造成严重人体伤害或者设备的损坏。 

**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

**Panel Mount** _DataSheet_ 

## **ANNEX - ENVIRONMENTAL INFORMATION** 

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. 

|Part<br>Name|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|
|---|---|---|---|---|---|---|
||Lead<br>(Pb)|Mercury<br>(Hg)|Cadmium<br>(Cd)|Hexavalent<br>Chromium<br>(Cr (VI))|Polybrominated<br>biphenyls<br>(PBB)|Polybrominated<br>diphenyl ethers<br>(PBDE)|
|Semiconductor die|||||||
|Solder|||||||



## 附件 - 环保信息 

此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 

|件<br>部<br>名称|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|
|---|---|---|---|---|---|---|
||铅<br>(Pb)|汞<br>(Hg)|镉<br>(Cd)|六价铬<br>(Cr (VI))|多溴联苯<br>(PBB)|多溴二苯醚<br>(PBDE)|
|半导体芯片|||||||
|焊接点|||||||
|50|||||||



**Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2020 Crydom Inc. Specifications subject to change without notice. 

Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. 

Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. 

All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY, AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONSRELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA 

## **CONTACT US** 

**Regional head offices: United States of America** Sensata Technologies Attleboro, MA **Phone:** 508-236-3800 **E-mail:** support@sensata.com **Netherlands** Sensata Technologies Holland B.V. Hengelo **Phone:** +31 74 357 8000 **E-mail:** support@sensata.com **China** Sensata Technologies China Co., Ltd. Shanghai **Phone:** +8621 2306 1500 **E-mail:** support@sensata.com 

Copyright © 2023 Sensata Technologies, Inc. 

sensata.com