CCR550PS15

CCR550 series 

## 550W **Fancooled** 450W **Conductioncooled** 

## 230W **Convection cooled** 

## **AC-DC power supplies** 

The CCR550 series of compact medical AC-DC power supplies are designed to operate in convection, conduction, and fan cooled applications with power ratings from 230W to 550W. CCR550 offers high efficiency and high power density in a low 1" profile, baseplate cooled design that ensures effective thermal management and quiet operation for noise sensitive applications. 

Featuring Class B conducted and radiated emissions, worldwide industrial and medical safety approvals, 2 x MOPP isolation and low leakage currents, the CCR550 is designed for easy integration into a wide range of BF rated medical applications including respiratory care, imaging, patient monitoring, patient treatment, and industrial applications such as process control, test & measurement, and industrial printing. 

## **Features** 

## **Applications** 

## **Dimensions** 

- f 550W fan cooled, 450W conduction cooled 

129.4 x 83.5 x 25.4mm (5.09" x 3.29" x 1.00") 

- f Universal, single phase input: 85 to 264VAC 

- f 129.4 x 83.5mm footprint, 25.4mm profile 

- f High efficiency, up to 94% 

- f Low earth leakage <300µA 

- f Low patient leakage <90µA 

- f Medical (BF) & ITE safety approvals 

- f Class B conducted and radiated emissions 

- f 3 year warranty 

Healthcare Instrumentation Process control . **Documentation** Robotics Technology For further information click the link or scan the code xppower.com 

## **Models & ratings** 

|Model number|Output voltage|Output current|Output current|Output current|Efficiency(3)|
|---|---|---|---|---|---|
|||Convection cooled|Conduction cooled(2)|Fan cooled(1)||
|CCR550PS12|12.0V|19.16A|37.50A|45.83A|92%|
|CCR550PS15|15.0V|15.33A|30.00A|36.66A|93%|
|CCR550PS24|24.0V|9.58A|18.75A|22.91A|93%|
|CCR550PS28|28.0V|8.21A|16.07A|19.64A|93%|
|CCR550PS30|30.0V|7.67A|15.00A|18.33A|93%|
|CCR550PS36|36.0V|6.39A|12.50A|15.27A|94%|
|CCR550PS48|48.0V|4.79A|9.37A|11.45A|94%|
|CCR550PS54|54.0V|4.26A|8.34A|10.18A|94%|



Notes: 

1. Requires 37m[3] /h (22CFM) 

   3.  Typical value at 230VAC input and 550W load. 

2. Thermal resistance for conduction cooling ≤1.0°C/W. 

1 [| 

**AC-DC power supplies** 

## CCR550 series 

**==> picture [32 x 31] intentionally omitted <==**

## **Input** 

**==> picture [554 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristic Minimum Typical Maximum Units Notes & conditions<br>**----- End of picture text -----**<br>


|Characteristc|Minimum|Typical|Maximum|Units|Notes & conditons|
|---|---|---|---|---|---|
|||||||
|Input voltage - operating|85(1)|115/230|264|VAC|Derate output linearly from 550W at 120VAC to 400W at 85VAC<br>– fan cooled|
||||||Derate output linearly from 450W at 110VAC to 350W at 85VAC<br>– conduction cooled|
||||||Derate output linearly from 230W at 110VAC to 200W at 85VAC<br>– convection cooled|
|Input frequency|47|50/60|63|Hz|Agency approval, 47-63Hz|
|Power factor||0.98|||230VAC, 100% load|
|Input current - full load|||5.6/2.8|A|115/230VAC|
|Inrush current|||45|A|240VAC cold start, +25°C|
|Earth leakage current|||300|µA|264 VAC/60Hz|
|Input protection|T6.3A/250 V Internal fuse ftted in line and neutral.|||||



## Notes: 

1. Agency approval, 90-264VAC 

## **Output** 

**==> picture [554 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristic Minimum Typical Maximum Units Notes & conditions<br>**----- End of picture text -----**<br>


|Characteristc|Minimum|Typical|Maximum|Units|Notes & conditons|
|---|---|---|---|---|---|
|||||||
|Output voltage|12||54|VDC|See models and ratings table|
|Initial set accuracy|||±1|%|Full load, 115/230VAC|
|Minimum load|No minimum load required|||||
|Start up|||2|s|115/230VAC full load|
|Hold up time|8|12||ms|115VAC full load at +25°C|
|Line regulation|||±0.2|%||
|Load regulation|||±0.5|%|10-100% load|
|Transient response|||4|%|Recovery within 1% in less than 500µs for a 75-100% and 100-75%<br>load step|
|Output voltage adjustment||±5||%|28V model adjustment range is 0 to 5%|
|Ripple & noise|||1/200|%/mV|12V & 15V / others, measured at 20MHz bandwidth and 10µF<br>electrolytic capacitor in parallel with 0.1µF ceramic capacitor at +25°C|
|Remote sense|Compensates for 5% drop of nominal output voltage|||||
|Overvoltage protection|110||150|%|Vnom, 48V & 54V model OVP <60V<br>Recycle input to reset|
|Overload protection|120||160|%|Inom|
|Short circuit protection|Trip & restart|||||
|Drift|||±0.02|%|After 20 min warm up|
|Temperature coeffcient|||0.02|%/˚C||
|Overtemperature protection|Measured internally, auto resetting|||||



Specifications subject to change without notice. 

2 

**AC-DC power supplies** 

## CCR550 series 

**==> picture [31 x 31] intentionally omitted <==**

## **General** 

**==> picture [554 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristic Minimum Typical Maximum Units Notes & conditions<br>Efficiency 94 % See models and ratings table<br>**----- End of picture text -----**<br>


|Characteristc|Minimum|Typical|Maximum|Units|Notes & conditons|
|---|---|---|---|---|---|
|Effciency||94||%|See models and ratings table|
|Isolation:  input to output<br>input to ground<br>output to ground|4000|||VAC|2 x MOPP|
||1800|||VAC|1 x MOPP|
||1500|||VAC|1 x MOPP|
|Switching frequency||65||kHz|Main converter full load|
|||115||kHz|PFC full load|
|Power density|||2.0|W/cm3|Fan cooled|
|Patient leakage current|||90|µA||
|Mean time between failure|400|||khrs|MIL-HDBK-217F, +25°C GB.|
|Weight||535 (1.18)||g (lb)||



## **Environmental** 

**==> picture [554 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
Characteristic Minimum Typical Maximum Units Notes & conditions<br>**----- End of picture text -----**<br>


|Characteristc|Minimum|Typical|Maximum|Units|Notes & conditons|
|---|---|---|---|---|---|
|||||||
|Operatingtemperature|-40||+80|°C|See deratingcurve, safetyapproved to +50°C|
|Storage temperature|-40||+85|°C||
|Cooling|37 (22)|||m3/h (CFM)|For fan cooled operation|
|Humidity|5||95|%RH|Non-condensing|
|Operating altitude|||5000 / 2000|m|OVC II / OVC III|
|Vibration|Single axis 10-500Hz at 2gsweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6|||||
|Shock|±3 x 30gshocks in each plane, total 18 shocks. 30g= 11ms (±0.5msecs), half sine. Conforms to EN60068-2-27|||||
|Baseplate temperature|||+95|°C|When using conduction cooling, max baseplate temperature<br>(measured at the center) is +95°C but some components are not<br>thermally connected to the baseplate. The temperatures of these<br>components may not exceed temperatures shown in the thermal<br>considerations section on page 5.|



## **Derating curve** 

Input derating curve 

## Thermal derating curve 

**==> picture [250 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
550<br>500 Fan cooled (37m³/h Air flow & with 1.0°C/W or be�er heatsink)Fan cooled (37m³/h Air flow)<br>450<br>Conduc�on cooled (1.0°C/W or better heatsink)<br>400<br>350<br>300<br>250260<br>230<br>200 Convec�on cooled<br>150<br>100<br>50<br>0 110 120<br>85 115 145 175 205 235 265<br>Input Voltage (VAC)<br>Output Power (W)<br>**----- End of picture text -----**<br>


**==> picture [280 x 135] intentionally omitted <==**

**----- Start of picture text -----**<br>
550<br>500<br>450<br>400<br>350<br>300<br>260<br>250<br>230<br>200<br>Convec�on cooled @110VAC<br>150 Convec�on cooled @220VAC<br>Conduc�on cooled @ 110VAC<br>100 Conduc�on cooled @ 220VAC<br>50 Fan cooled with 37m [3] /h Air flow and heatsink<br>Fan cooled with 37m [3] /h Air flow<br>0<br>-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90<br>Temperature (°C)<br>Output Power (W)<br>**----- End of picture text -----**<br>


Specifications subject to change without notice. 

3 

**AC-DC power supplies** 

## CCR550 series 

**==> picture [31 x 31] intentionally omitted <==**

## **Emissions - EMC** 

**==> picture [554 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
Phenomenon Standard Test level Notes & conditions<br>**----- End of picture text -----**<br>


|Phenomenon|Standard|Test level|Notes & conditons|
|---|---|---|---|
|||||
|Conducted|EN55032/EN55011|Class B||
|Radiated|EN55032/EN55011|Class B||
|Harmonic currents|EN61000-3-2|Class A & C|Class C ≥200W|
|Voltage ficker|EN61000-3-3|||



## **Emissions - immunity** 

**==> picture [554 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
Phenomenon Standard Test level Criteria Notes & conditions<br>**----- End of picture text -----**<br>


|Phenomenon|Standard|Test level|Criteria|Notes & conditons|
|---|---|---|---|---|
||||||
|Medical device EMC|IEC60601-1-2|Ed.4.0 : 2014|as below||
|Low voltage PSU EMC|EN55035||as below||
|ESD immunity|EN61000-4-2|4|A|±15kV air, ±8kV contact|
|Radiated immunity|EN61000-4-3|10V/m|A||
|EFT/burst|EN61000-4-4|±2kV|A||
|Surge|EN61000-4-5|Installation class 4|A|±2kV line to line, ±4kV line to earth|
|Conducted|EN61000-4-6|6V|A||
|Magnetic feld|EN61000-4-8|30A/m|A||
|Dips and interruptions|EN55035<br>(115VAC)|Dip 100% (0VAC), 10ms|A||
|||Dip 100% (0VAC), 20ms|A||
|||Dip 30% (80.5VAC), 500ms|B||
|||Dip 60% (46VAC), 100ms|B||
|||Dip 100% (0VAC), 5000ms|B||
||EN55035<br>(230VAC)|Dip 100% (0VAC), 10ms|A||
|||Dip 100% (0VAC), 20ms|A||
|||Dip 30% (181VAC), 500ms|A||
|||Dip 60% (92VAC), 100ms|A||
|||Dip 100% (0VAC), 5000ms|B||
||EN60601-1-2<br>(100VAC)|Dip 100% (0VAC), 10ms|A||
|||Dip 100% (0VAC), 20ms|A||
|||Dip 30% (70VAC), 500ms|B||
|||Dip 100% (0VAC), 5000ms|B||
||EN60601-1-2<br>(240VAC)|Dip 100% (0VAC), 10ms|A||
|||Dip 100% (0VAC), 20ms|A||
|||Dip 30% (168VAC), 500ms|A||
|||Dip 100% (0VAC), 5000ms|B||



## **Safety approvals** 

|Certfcaton|Standard|Notes & conditons|
|---|---|---|
|CB report|IEC62368-1|Audio/video, information and communication technologyequipment|
||IEC60601-1|Medical|
|UL|UL62368-1|Audio/video, information and communication technologyequipment|
||ANSI/AAMI ES60601-1 & CSA C22.2 No.60601-1|Medical|
|EN|EN62368-1|Audio/video, information and communication technologyequipment|
||EN60601-1|Medical|
|CE|Meets all applicable directives||
|UKCA|Meets all applicable legislation||
||||
|Isolaton|Standard|Notes & conditons|
|Primaryto Secondary|2 x MOPP (Means of Patient Protection)|Class I & Class II for both ITE & Medical|
|Primaryto Earth|1 x MOPP (Means of Patient Protection)||
|Secondaryto Earth|1 x MOPP (Means of Patient Protection)||



Specifications subject to change without notice. 

4 

**AC-DC power supplies** 

## CCR550 series 

**==> picture [32 x 31] intentionally omitted <==**

## **Mechanical details** 

**==> picture [554 x 600] intentionally omitted <==**

**----- Start of picture text -----**<br>
129.4 (5.09)<br>119.38 (4.700)<br>Mounting inserts ø3.2<br>(0.13) through 4 places<br>5.01 (0.197)<br>All Dim<br>Air flow<br>direction AC input connector (CN1): ECE ETB22Toleran<br>22CFM 2cm  -Vo Pin connections<br>1 VR Pin Function Mating wire range<br>2<br>+Vo AC Inp1 ACL<br>CN1 12 Pin 2 ACN 14-18AWG<br>CN2 1<br>Max torque: 0.4 N-m (3.5 lb-in)<br>2<br>Anode Black Remote sense (CN2): TKP 8822-02-NHB or equivalentDC Ou<br>Pin<br>1 Pin connections<br>FG(   ) Pin 2 Function Mating housing Terminal<br>M3.5x0.6 1 S+ JST XHP-2 JST SXH-001T-P0.6N<br>depth 2mm 2 S- or equivalent or equivalent<br>DC Ou<br>Max torque:<br>0.7N-m (6.2lb-in) DC output terminal screws are M4.Funct<br>Washer size (ID): 4.3mm (0.17") nom, (OD): 7.3mm (0.29") max     +Vo<br>Max torque: 0.7N-m (6.2lb-in)-Vo<br>Tc Mounti<br>Serie<br>Blan<br>-C0<br>Tc: baseplate temperature measurment point<br>Notes:<br>1. All dimensions shown in mm (inches).  Tolerance: ±0.5 (0.02). 2.  Weight:  Standard versions: 535g (1.18lbs) approx.<br>Thermal considerations<br>27.0<br>(1.07)<br>Temperature measurements (at maximum ambient)<br>22.0<br>Component Max temperature °C<br>(0.87)<br>L103 +130°C<br>F1 +125°C Cover<br>C105 +105°C F1 (above T1) C207<br>C207 +125°C<br>Cover (above T1) +100°C<br>Baseplate (Tc) +95°C L103<br>C105<br>FAN<br>68.58 (2.700) 83.5 (3.29)<br>7.46 (0.294)<br>25.4 ±0.9 (1.00 ±0.04)<br>**----- End of picture text -----**<br>


In order to ensure safe operation of the PSU in the end-use equipment, the temperature of the components listed in the table must not be exceeded. Temperature should be monitored using K type thermocouples placed on the hottest part of the component (out of direct air flow). 

27 August 2025 

**5**