CCM250PS36
AC/DC Open Frame Power Supply (PSU), ITE & Medical, 1 Output, 250 W, 80V AC to 275V AC
- Manufacturer: XP POWER
- Product type: AC / DC Open Frame Power Supplies
- No. of Outputs:1 Output; Power Rating (Covection Cooling):250W; Power Rating (Forced Cooling):-; Input Voltage VAC:80V AC to 275V AC; Power Supply Output Type:Adjustable, Fixed; O
- SVHC: No SVHC (15-Jan-2018)
- Product Range: CCM250 Series
- No. of Outputs: 1 Output
- Output Power Max: 250W
- Input Voltage VAC: 80V AC to 275V AC
- Input Voltage AC Max: 275V
- Input Voltage AC Min: 80V
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 6.9A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Current - Output 4: -
- Output Voltage - Output 1: 36VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE & Medical
- Power Rating (Forced Cooling): -
- Power Rating (Convection Cooling): 250W
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 279.51 € |
| Current stock | 10+ |
| Lead time | 30 days |
**250 Watts** xppower.com ## **CCM Series** - 250 W Convection Cooled - 300 W Peak Rating for 500 ms - Very High Efficiency up to 95% - Class B Conducted & Radiated Emissions - 80 - 275 VAC Operation - IT, Industrial & Medical Safety Approvals - 3 Year Warranty ## ~~**Specification**~~ ## **Input** - Input Voltage • 80-275 VAC (See derating curve) Input Frequency • 47-63 Hz Input Current • 2.4 A typical at 115 VAC, full load 1.2 A typical at 230 VAC, full load - Inrush Current • 30 A max at 230 VAC, cold start at 25 °C Power Factor • >0.9 Earth Leakage Current • 250 μ A max at 264 VAC/60 Hz Input Protection • Internal T5.0 A/250 V fuse in line and neutral ## **Output** - Output Voltage • 12-48 VDC (see tables) Output Voltage Trim • ±3% (see Mechanical Details) Initial Set Accuracy • ±0.5% V1, ±5% V2 Minimum Load • No minimum load required Start Up Delay • 1 s typical Start Up Rise Time • 50 ms typical Hold Up Time • 16 ms min at 115 VAC Drift • ±0.2% after 20 min warm up Line Regulation • ±0.5% max Load Regulation • ±1% V1, ±5% V2 Over/Undershoot • 5% typical Transient Response • 4% max. deviation, recovery to within 1% in 500 μ s for a 50-75-50% load change - Ripple & Noise • 1% pk-pk, 20 MHz bandwidth - Overvoltage Protection • 115-140% Vnom, recycle input to reset (V1 only) Overload Protection • 125-165% Inom V1 only Short Circuit Protection • Continuous trip and restart (hiccup mode) Temperature • 0.05%°C Coefficient Remote On/Off • Uncommitted isolated optocoupler diode, (Inhibit/Enable) powered diode inhibits V1 ## **General** - Efficiency • Up to 95% Isolation • 4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground - Switching Frequency • PFC 30-500 kHz, Boost 25.6 kHz, Main 51.2 kHz - Signals • Power Fail - open collector, transistor off for AC good, ≥ 5 ms warning of loss of output - MTBF • 365 kHrs to MIL-HDBK-217F at 25 °C, GB ## **Environmental** Operating Temperature • -20 ˚ C to +70 ˚ C derate linearly from +50 °C at 2.5%/°C to 50% load at +70 °C. See derating curve and longform datasheet for thermal considerations. (-40 °C consult sales) Cooling • Convection cooled Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Shock • 30 g pk, half sine, 6 axes Vibration • 2 g rms, 5 Hz to 500 Hz, 3 axe s **EMC & Safetyy** Low Voltage PSU EMC • EN61204-3, high severity level Emissions • EN55011/32 level B conducted EN55011/32 level B radiated RTCA D0160D 21.4 Cat. M radiated MIL-STD 461D-F, CE102 Harmonic Currents • EN61000-3-2, class A, EN61000-3-2, class C for loads ≥ 40% Voltage Flicker • EN61000-3-3 Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Surge • EN61000-4-5, installation class 3 Perf Criteria A Conducted Immunity • EN61000-4-6, level 3 Perf Criteria A, MIL-STD 461 CS114 Dips & Interruptions • EN61000-4-11 , 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B , EN60601-1-2, 30% 500 ms, 60% 100 ms, 100% 10 ms, 100% 5000 ms, Perf Criteria A, A, A, B - 230 VAC. Consult longform datasheet for 115 V operation. Safety Approvals • See Safety Approvals (see next page) Equipment Protection • Class I Class ## **EMC & Safetyy** **CCM250** ## ~~**Models and Ratings**~~ |Output Power|Output Power|Output Voltage V1|Output Current V1|Output Current V1|Standby Supply V2|Model Number| |---|---|---|---|---|---|---| |Nominal|Peak(1)||Nominal|Peak(1)||| |250 W|300 W|12.0 V|20.8 A|25.00 A|5.0 V/0.5 A|CCM250PS12| |250 W|300 W|15.0 V|16.7 A|20.00 A|5.0 V/0.5 A|CCM250PS15| |250 W|300 W|24.0 V|10.4 A|12.50 A|5.0 V/0.5 A|CCM250PS24| |250 W|300 W|28.0 V|8.9 A|10.70 A|5.0 V/0.5 A|CCM250PS28| |250 W|300 W|36.0 V|6.9 A|8.30 A|5.0 V/0.5 A|CCM250PS36| |250 W|300 W|48.0 V|5.2 A|6.25 A|5.0 V/0.5 A|CCM250PS48| ## ~~**Notes**~~ _1. Peak duration is 500 ms max, average power must not exceed 250 W._ ## ~~**Mechanical Details**~~ **==> picture [457 x 367] intentionally omitted <==** **----- Start of picture text -----**<br> 0.94 3.94 (100.0)<br>(23.9)<br>(| 2.95 e e ) | oN L X 9°<br>(74.9)<br>In put Connector<br>M3 Mounting holes (in 4 positons) 0.53 Pin 1 Line<br>Max. penetration by screw to be 0.1 (2.5) (13.3) Pin 2 Neutral<br>from bottom face of chassis 2 1 Pin 3 Earth<br>Signal Connector<br>CON 1<br>6.00 Input connector mates with Molex<br>(152.4) 10 9 housing 09-50-1051 and Molex<br>series 5194 crimp terminals.<br>Output Connector CON 3<br>Output Voltage Adj. Pin 1 +V1<br>Output terminals<br>M4 Screws in Pin 2 V1 RTN<br>(2) 2 positions.<br>jy HT Joo N G \ Lolol) CON3 i!1 maIC)i: Torque to 0.8 lbs-in<br>(101.6)4.00 (1) (90 cNm) max Signals Connector CON 1<br>Output terminalsallow connection from Pin 1 5 V Standby Return<br>1 either top or side Pin 2 5 V Standby<br>23 Pin 3 5 V Standby Return<br>_ | [|] l o SESE| an — (Ot Pin 4 5 V Standby<br>Pin 5 5 V Standby Return<br>Input Connector Pin 6 5 V Standby<br>M3 Mounting holes (in 2 positions each side)Max. penetration by screw to be 0.1 (2.5) from Pin 7 Power Fail (Collector)<br>outside face of chassis Pin 8 Power Fail (Emitter)<br>Pin 9 Remote On / Off (Cathode)<br>(39.1)1.54 Pin 10 Remote On / Off (Anode)<br>0.75<br>(19.1) a ;eeg e ® CON 1 mates with JST housing<br>PHDR-10VS with contact SPHD-<br>001T-P0.5<br>1.73 4.00<br>(44.0) (101.6)<br>-<br>+<br>**----- End of picture text -----**<br> ## ~~**Notes**~~ 1. At AC switch on the output (VI) may momentarily rise when the unit is disabled using the 5 V standby supply in conjunction with the Remote On/Off function. (See longform datasheet for details) 3. Tolerance .xx = ±0.02 (0.50); .xxx = ±0.01 (0.25) 4. Weight 1.7 lb (780 g) approx 2. All dimensions in inches (mm). ## ~~**Input Voltage & Temperature Derating**~~ ## ~~**Safety Approvals**~~ **==> picture [388 x 103] intentionally omitted <==** **----- Start of picture text -----**<br> 300<br>Peak Power Availability<br>250 eee ee ee ee<br>300<br>Peak Power Availability 200<br>250<br>150<br>200 Pee<br>100<br>150<br>ee 50<br>100<br>ee ee ee ee<br>0<br>50 es -20 ee -10 0 10 40 50 60 70<br>Ambient Temperature (°C)<br>Po<br>80 85 90 264 275<br>Input Voltage (VAC)<br>Output Power (W)<br>Output Power (W)<br>**----- End of picture text -----**<br> IEC60950-1, CSA 22.2 No. 60950-1, UL60950-1, TUV EN60950-1 IEC60601-1 CB report, CSA 22.2 No. 60601-1, UL60601-1, TUV 60601-1, IEC62368-1, UL62368-1, CSA C22.2 No62368-1, EN62368-1, CE & UKCA meets all applicable directives & legislation. 26 July 2022
Updated at June 8, 2026
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →