Image not available
Illustrative purposes only
C93418
RELAY, SIGNAL, DPDT, 250VAC, 220VDC, 2A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: Axicom
- Product type: Signal Relays
- Coil Type: Non Latching
- Coil Voltage: 12VDC
- Product Range: MT2 Series
- Relay Mounting: Through Hole
- Coil Resistance: 720ohm
- Contact Current: 2A
- Relay Terminals: Solder
- Contact Material: Silver Nickel
- Contact Voltage VAC: 250V
- Contact Voltage VDC: 220V
- Contact Configuration: DPDT
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 2.06 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
Signal Relays **AXICOM** ## **MT2 Relay** > n **Telecom/signal relay (dry circuit, test access, ringing)** > n **Slim line 20x10mm (.795x.393”)** ## n **Switching current 2A** > n **2 form C contacts (2 CO, 2 changeover contacts)** > n **Bifurcated contacts** > n **Meets FCC Part 68 and ITU-T K20** ## Typical applications Communications equipment, linecard application – analog, ISDN, xDSL, PABX, voice over IP, office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment, automotive Equipment ## Z |~~**Approvals**~~||||||||||~~**Coil Data**~~|||||| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |UL 508 File No. E 111441||||||||||Magnetic system|||neutral||| |Technical data of approved types on request||Technical data of approved types on request||||||||Coil voltage range|||3 to 48VDC||| |||||||||||Max. coil temperature|||115°C||| |~~**Contact Data**~~||||||||||Thermal resistance|||< 85K/W||| |Contact arrangement||||||2 form C (2 CO)||||**Coil versions, monostable**|||||| |Max. switching voltage||||||220VDC, 250VAC||||Coil<br>Rated|Operate|Limiting|Release|Release<br>Coil|Rated coil| |Rated current||||||2A||||code<br>voltage|voltage|Voltage|voltage|resistance|resistance<br>power| |Limiting continuous current, 85°C||||||2A||||VDC|VDCmin.|VDCmax.|VDCmin.|Ω±10%|mW| |Contact material||||||AgNi, gold-covered||||**High sensitive version, 150mW**|||||| |Contact style||||||bifurcated contacts||||00<br>3|2.1|8.1|0.3|60|150| |Min. recommended contact load||||||10mA at 20mV|10mA at 20mV|||07<br>3.3|2.3|8.8|0.33|72|150| |Minimum switching voltage||||||100μV||||06<br>4.5|3.2|12.2|0.45|136|150| |Initial contact resistance|||||< 70mΩ at 10mA, 20mV|||||01<br>5|3.6|13.5|0.5|168|150| |Frequency of operation, without load max.||Frequency of operation, without load max.||||Frequency of operation, without load max.<br>50 operations/s||||27<br>6|4.3|16.2|0.6|240|150| |Operate / release time max.||||||5ms/3ms||||05<br>9|6.4|24.3|0.9|544|150| |Bounce time max.||||||5ms||||02<br>12|8.6|32.4|1.2|968|150| |Electrical endurance||||||||||03<br>24|17.1|64.8|2.4|3872|150| |contact application 0 (≤30mV/≤10mA)||||||min. 5x106operations||||04<br>48|34.1|129.6|4.8|15468|150| |cable load open end|||||min. 2.5x106operations|||||**Sensitive version, 200mW**|**Sensitive version, 200mW**||||| |resistive load 150V/0.2A - 30W||||||min. 2x105operations||||14<br>3|2|7|0.3|45|200| |24V/1.25A-30W||||||min. 2x105operations||||15<br>4.5|2.9|10.5|0.45|101|200| |Contact ratings, UL||||||220VDC/0.24A - 60W||||16<br>5|3.3|11.6|0.5|125|200| |||||||125VDC/0.24A - 30W||||28<br>6|3.9|14|0.6|180|200| ||||||250VAC/0.25A - 62.5VA|||||17<br>9|5.9|21|0.9|405|200| |||||||125VAC/0.5A - 62.5VA||||18<br>12|7.8|28|1.2|720|200| |||||||30VDC/2A-60W||||19<br>24|15.6|59.9|2.4|2880|200| |Mechanical endurance|||||typ. 100x106operations|||||20<br>48|31.2|112|4.8|11520|200| |||||||||||**Sensitive version, 300mW**|**Sensitive version, 300mW**||||| |Max. DC load breaking capacity<br>egll<br>-NU<br>100 SSSEEN<br>esa<br>A<br>a<br>a<br>rsNe<br>so<br>LF<br>1<br>TELEX<br>EET||||||||||33<br>4.5<br>34<br>5<br>12<br>12<br>35<br>24<br>36<br>48<br>**Standard version, 400mW**<br>21<br>4.5<br>22<br>5<br>29<br>6<br>23<br>9<br>24<br>12<br>25<br>24|3.1<br>3.4<br>8.25<br>16.5<br>32.5<br>**Standard version, 400mW**<br>2.9<br>3.3<br>3.9<br>5.9<br>7.8<br>15.6|8.9<br>9.9<br>23.6<br>47.3<br>54.6<br>8.9<br>9.9<br>11.8<br>17.7<br>23.6<br>47.3|0.45<br>0.5<br>1.2<br>2.4<br>4.8<br>0.45<br>0.5<br>0.6<br>0.9<br>1.2<br>2.4|73<br>90<br>515<br>2060<br>8240<br>50<br>63<br>90<br>203<br>360<br>1440|300<br>300<br>300<br>300<br>300<br>400<br>400<br>400<br>400<br>400<br>400| |DC voltage [VDC]<br>.<br>29 | recommended<br>application range<br>10<br>01<br>02<br>05<br>1||||||DC current [A]<br>ail<br>2<br>5<br>10||||26<br>48<br>31.2<br>94.6<br>4.8<br>5760<br>400<br>**Standard version, 550mW**<br>38<br>4.5<br>2.9<br>6.3<br>0.45<br>36<br>550<br>50<br>5<br>3.3<br>7<br>0.5<br>45<br>550<br>37<br>6<br>3.9<br>8.4<br>0.6<br>66<br>550<br>32<br>12<br>7.8<br>16.8<br>1.2<br>280<br>550<br>31<br>24<br>15.6<br>33.6<br>2.4<br>1050<br>550<br>30<br>48<br>31.2<br>67.2<br>4.8<br>4100<br>550<br>All figures are given for coil without pre-energization, at ambient temperature +23°C.<br>~~Ss~~<br>~~———— —~~|||||| **==> picture [176 x 65] intentionally omitted <==** **----- Start of picture text -----**<br> 29 | recommended<br>application range<br>10<br>01 02 05 1 2 5 10<br>DC current [A]<br>DC voltage [VDC]<br>**----- End of picture text -----**<br> Other coil voltages on request. 1 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 09-2014, Rev. 0914 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Signal Relays **AXICOM** ## **MT2 Relay** (Continued) ## ~~**Coil Data** (continued)~~ **==> picture [475 x 618] intentionally omitted <==** **----- Start of picture text -----**<br> (continued) Coil Data (continued)<br>3.23.0 150 150 mW coil mW 3.02.8 55 0 mW550 mW coil<br>2.8 Umax. at 0 A 2.6<br>2.6 Umax. at 2 x 1 A 2.4 Umax. at 0 A<br>2.4 Umax. at 2 x 2 A 2.2 Umax. at 2 x 1 A<br>2.2 Umax. at 2 x 2 A<br>2.0<br>2.0<br>1.8<br>1.8<br>1.6<br>1.6 Ht iy<br>1.4 1.4<br>1.2 1.2<br>1.0 Unom. nominal coil voltage 1.0 Unom. nominal coil voltage<br>0.8 0.8<br>0.60.4 > UUop. min.rel. min. 0.60.4 = UUop. min.rel. min.<br>0.2 0.2<br>0.0 J0SRRRRRRR0074008 0.0 HH eet<br>-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120<br>Ambient Temperatur e [°C ] Ambient Temperature [°C]<br>3 200 200 mW coil mW Coil operative range graphs<br>2.8 Unom Nominal coil voltage<br>2.6 Umax. at 0 A Umax Upper limit of the operative range of the coil voltage (limiting<br>2.4 Umax. at 2 x 1 A voltage) when coils are continously energized<br>2.2 Umax. at 2 x 2 A Uop. min. Lower limit of the operative range of<br>2 the coil voltage (reliable operate voltage)<br>1.8 Urel. min. Lower limit of the operative range of<br>1.6 the coil voltage (reliable release voltage)<br>1.4<br>1.2 Insulation Data<br>1 Unom. nominal coil voltage<br>0.80.60.4 aa NO Uop. min. Initial dielectric strength between open contacts between contact and coil 1050V750Vrms rms<br>0.2 Urel. min. between adjacent contacts 750Vrms<br>0 oe ee Initial surge withstand voltage<br>-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 between open contacts 1500V<br>Ambient Temperature [°C] between contact and coil 1500V<br>3.0 30 0 mW300 mW coil between adjacent contacts 1500V<br>2.8 [— si a Initial insulation resistance at 500VDC > 10 [9] Ω<br>2.6 Capacitance<br>2.42.22.01.8 U U Umax. max. max. a at 2 at 2 x 2 At 0 A x 1 A between open contacts between contact and coil between adjacent contacts max. 2 pFmax. 2pF max. 4pF<br>1.6<br>1.41.2 RF Data<br>1.0 Unom. nominal coil voltage Isolation at 100MHz/900MHz -31.8dB/-14.2dB<br>0.8 Insertion loss at 100MHz/900MHz -0.02dB/-0.97dB<br>0.6 Voltage standing wave ratio (VSWR)<br>0.4 PK ae Uop. min. at 100MHz/900MHz 1.03/1.31<br>0.2 Urel. min.<br>0.0 [SEE Set<br>-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Other Data<br>Ambient Temperature [°C]<br>Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content<br>3.0 40 0 mW400 mW coil refer to the Product Compliance Support Center at<br>2.82.6 — BS www.te.com/customersupport/rohssupportcenter<br>2.42.2 UUUmax.max.max. at 0 A at 2 x 1 A at 2 x 2 A Ambient temperature Category of environmental protection -55 to +85°C<br>IEC 61810 RT III - immersion cleanable<br>2.01.8 Degree of protection, IEC 60529 IP 67<br>1.6 Vibration resistance (functional) 10g, 10 to 500Hz<br>1.4 Shock resistance (functional)<br>1.2 IEC 60068-2-27 (half sine) 10g/30g<br>1.0 Unom. nominal coil voltage Shock resistance (destructive) 500g<br>0.8 Terminal type PCB-THT<br>0.6 Weight max. 5g<br>0.4 =& UUop. min.rel. min. ne Resistance to soldering heat THT<br>0.2 SS E IEC 60068-2-20 265 °C / 10 s<br>0.0-60 -50 -40 -30 -20 -10Ambient Temperature [°C]0 10 20 30 40 50 60 70 80 90 100 110 120 Ultrasonic cleaning Packaging unit not recommended1000 pcs.<br>]nom ]nom<br>Coil Voltage [U/U Coil Voltage [U/U<br>]nom<br>Coil Voltage [U/U<br>]nom<br>Coil Voltage [U/U<br>]nom<br>Coil Voltage [U/U<br>**----- End of picture text -----**<br> 2 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 09-2014, Rev. 0914 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company **AXICOM** ## Signal Relays ## **MT2 Relay** (Continued) **Terminal assignment** TOP view on component side of PCB ## **Dimensions** ## **Product code structure** **PCB layout** TOP view on component side of PCB ## **Packing** Typical product code **C934 22** **Type C934** MT2 Series Signal Relay 2 form C, 2 CO, AgNi +Au contacts **Coil** Coil code: please refer to coil versions table 3 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 09-2014, Rev. 0914 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Signal Relays **AXICOM** ## **MT2 Relay** (Continued) |**Product code**<br>~~eG~~|**Version**<br>~~eG~~|**Coil**|**Coil power**<br>~~GC~~|**Coil voltage**<br>~~C~~|**Part number**| |---|---|---|---|---|---| |C93400<br>C93407<br>C93406<br>C93401<br>C93427<br>C93405<br>C93402<br>C93403<br>C93404<br>C93414<br>C93415<br>C93416<br>C93428<br>C93417<br>C93418<br>C93419<br>C93420<br>C93433<br>C93434<br>C93412<br>C93435<br>C93436<br>C93421<br>C93422<br>C93423<br>C93424<br>C93425<br>C93426<br>C93438<br>C93450<br>C93437<br>C93432<br>C93431<br>C93430<br>~~eG~~|2 form C (2CO)<br>AgNi+Au<br>contacts<br>~~eG~~|High<br>sensitive|**Coil power**<br>150mW<br>~~GC~~|**Coil voltage**<br>3VDC<br>~~C~~<br>~~Po~~|1-1462001-2<br>1-1462001-3<br>2-1462000-2<br>1462000-1<br>5-1462000-6<br>2-1462000-0<br>1462000-7<br>1-1462000-3<br>1-1462000-8<br>1-1462001-1<br>3-1462000-0<br>3-1462000-1<br>5-1462000-7<br>3-1462000-6<br>3-1462000-7<br>4-1462000-1<br>4-1462000-5<br>6-1462000-6<br>6-1462000-8<br>2-1462000-6<br>7-1462000-0<br>7-1462000-2<br>4-1462000-7<br>4-1462000-8<br>5-1462000-0<br>5-1462000-1<br>5-1462000-3<br>5-1462000-5<br>7-1462000-7<br>8-1462000-5<br>7-1462000-6<br>6-1462000-2<br>6-1462000-1<br>5-1462000-9| |||||3.3VDC<br>~~Po~~<br>~~jp~~|| |||||4.5VDC<br>~~jp~~<br>~~po~~|| |||||5VDC<br>~~po~~<br>~~po~~|| |||||6VDC<br>~~po~~<br>~~po~~|| |||||9VDC<br>~~po~~<br>~~po~~|| |||||12VDC<br>~~po~~<br>~~po~~|| |||||24VDC<br>~~po~~<br>~~jp~~|| |||||48VDC<br>~~jp~~<br>~~po~~|| |||Sensitive|200mW|3VDC<br>~~po~~<br>~~ee~~|| |||||4.5VDC<br>~~ee~~<br>~~po~~|| |||||5VDC<br>~~po~~<br>~~po~~|| |||||6VDC<br>~~po~~<br>~~po~~|| |||||9VDC<br>~~po~~<br>~~jp~~|| |||||12VDC<br>~~jp~~<br>~~po~~|| |||||24VDC<br>~~po~~<br>~~po~~|| |||||48VDC<br>~~po~~<br>~~po~~|| |||Sensitive|300mW|4.5VDC<br>~~po~~<br>~~Po~~|| |||||5VDC<br>~~Po~~<br>~~po~~|| |||||12VDC<br>~~po~~<br>~~jp~~|| |||||24VDC<br>~~jp~~<br>~~po~~|| |||||48VDC<br>~~po~~<br>~~Po~~|| |||Standard|400mW|4.5VDC<br>~~Po~~<br>~~Jo~~|| |||||5VDC<br>~~Jo~~<br>~~po~~|| |||||9VDC<br>~~po~~<br>~~po~~|| |||||12VDC<br>~~jp~~|| |||||24VDC<br>~~jp~~<br>~~po~~|| |||||48VDC<br>~~po~~<br>~~Po~~|| |||Standard|550mW|4.5VDC<br>~~Jo~~|| |||||5VDC<br>~~Jo~~<br>~~po~~|| |||||6VDC<br>~~po~~<br>~~po~~|| |||||12VDC<br>~~jp~~|| |||||24VDC<br>~~jp~~<br>~~po~~|| |||||48VDC<br>~~po~~<br>~~Po~~|| 4 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ secterms of the disclaimer and all chapters of tion, application notes and all specifications the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 09-2014, Rev. 0914 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company
Updated at February 9, 2023
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →