BOND PLY TBP 850

## **Bond-Pl ® 100 y** 

Thermally Conductive, Fiberglass Reinforced Pressure Sensitive Adhesive Tape 

## **Features and Benefits** 

- Thermal impedance: 

- 0.86°C-in[2] /W (@100 psi) 

- High bond strength to a variety of surfaces 

- Double-sided, pressure sensitive adhesive tape 

- High performance, thermally conductive acrylic adhesive 

- Can be used instead of heat-cure adhesive, screw mounting or clip mounting 

## **Typical Applications Include:** 

- Mount heat sink onto BGA graphic processor or drive processor 

- Mount heat spreader onto power converter PCB or onto motor control PCB 

## **Configurations Available:** 

- Sheet form, roll form, and die-cut parts 

**Shelf Life:** The double-sided, pressure sensitive adhesive used in Bond-Ply products requires the use of dual liners to protect the surfaces from contaminants. Bergquist recommends a 6-month shelf life at a maximum continuous storage temperature of 35°C, or 3-month shelf life at a maximum continuous storage temperature of 45°C, for maintenance of controlled adhesion to the liner.The shelf life of the Bond-Ply material, without consideration of liner adhesion (which is often not critical for manual assembly processing), is recommended at 12 months from date of manufacture at a maximum continuous storage temperature of 60°C. 

## **TYPICAL PROPERTIES OF BOND-PLY 100** 

|PROPERTY<br>IMPERIAL VALUE|PROPERTY<br>IMPERIAL VALUE|PROPERTY<br>IMPERIAL VALUE|METRIC VALUE|METRIC VALUE|METRIC VALUE|TEST METHOD|
|---|---|---|---|---|---|---|
|Color<br>White||||White||Visual|
|Reinforcement Carrier<br>Fiberglass<br>Thickness (inch) / (mm)<br>0.005, 0.008, 0.011<br>Temp. Resistance, 30 sec. (°F) / (°C)<br>392<br>Elongation (%45° to Warp & Fill)<br>70|||Fiberglass<br>0.127, 0.203, 0.279<br>200<br>70|||—<br>ASTM D374<br>—<br>ASTM D412|
|Tensile Strength (psi) / (MPa)|900|||6||ASTM D412|
|CTE (ppm)|325|||325||ASTM D3386|
|Glass Transition (°F) / (°C)|-22|||-30||ASTM 1356|
|Continuous Use Temp (°F) / (°C)<br>-22 to 248|-22 to 248||-30 to 120|||—|
|ADHESION|||||||
|Lap Shear @ RT (psi) / (MPa)|100|||0.7||ASTM D1002|
|Lap Shear after 5 hr @ 100°C|200|||1.4||ASTM D1002|
|Lap Shear after 2 min @ 200°C|200|||1.4||ASTM D1002|
|Static Dead Weight Shear (°F) / (°C)<br>ELECTRICAL|302||150<br>VALUE|||PSTC#7<br>TEST METHOD|
|Dielectric Breakdown Voltage - 0.005" (Vac)||||3000||ASTM D149|
|Dielectric Breakdown Voltage - 0.008" (Vac)||||6000||ASTM D149|
|Dielectric Breakdown Voltage - 0.011" (Vac)||||8500||ASTM D149|
|Flame Rating||||V-O||U.L.94|
|THERMAL|||||||
|Thermal Conductivity (W/m-K)<br>THERMAL PERFORMANCE vs PRESSURE<br>Pressure (psi)||10|25|0.8|50|ASTM D5470<br>100<br>200|
|TO-220 Thermal Performance (°C/W) 0.005"||4.39|4.02||3.48|3.15<br>3.05|
|TO-220 Thermal Performance (°C/W) 0.008"||5.11|4.69||4.53|4.45<br>4.38|
|TO-220 Thermal Performance (°C/W) 0.011"||6.26|5.92||5.73|5.63<br>5.53|
|Thermal Impedance (°C-in2/W) 0.005" (1)||0.78|0.61||0.58|0.55<br>0.54|
|Thermal Impedance (°C-in2/W) 0.008" (1)<br>Thermal Impedance (°C-in2/W) 0.011" (1)||1.28<br>2.47|0.94<br>1.22||0.90<br>1.19|0.86<br>0.84<br>1.14<br>1.11|



- 1) The ASTM D5470 (Bergquist modified) test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. 

## **Building a Part Number** 

## **Standard Options** 

**==> picture [329 x 107] intentionally omitted <==**

**----- Start of picture text -----**<br>
BP100 – 0.008 – 00 – 1112 – NA 4 example<br>NA = Selected standard option. If not selecting a standard<br>option, insert company name, drawing number, and<br>revision level.<br>11/250 = 11" x 250' rolls, or 00 = custom configuration<br>00 = No adhesive<br>Standard thicknesses available:  0.005", 0.008", 0.011"<br>BP100 = Bond-Ply 100 Material<br>Note:  To build a part number, visit our website at www.bergquistcompany.com.<br>Section A Section B Section C Section D Section E<br>**----- End of picture text -----**<br>


Bond-Ply[®] : U.S. Patent 5,090,484 and others. 

## **www.bergquistcompany.com** 

The Bergquist Company - Europe Bramenberg 9a, 3755 BT Eemnes Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 

All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. 

The Bergquist Company - North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 

The Bergquist Company - China Rm. 7C, Aihe Mansion No. 629 Ling Ling Road Shanghai, China 200030 Ph: 86-21-6464-2206 Fax: 86-21-6464-2209 

PDS_10110_BP_100_0305