BL2R08MV1

## **BL2R** Timers Syrline 17.5 mm - 2 Relays 8A 

- › Multi ~~-~~ voltage 12 →240 V AC/DC › LED status indicator LED status indicator › Possibility of external load connection in parallel to the Possibility of external load connection in parallel to the control input control input 

- › 3 ~~S -~~ wire PNP sensor compatible o ane a _ 

|Specifications|Specifications||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Functions<br>Delay||Output||Nominal rating|||Nominal rating<br>Connections||Supply voltage|||Code|
|L - Li|0,1 s →10 days|2 changeover relays||8 A|||Screw terminals||12 →240 V ∿/⎓|||BL2R08MV1|
||||||||||||||
|Output relay|||||||||||||
|Contact arrangement|||||||2 CO (SPDT) (ChangeOver -Simple Pole Double Throw-)||||||
||||||||R1: Follow timing function||||||
||||||||R2: Follow timing function||||||
|Maximum switching voltage|||||||250 VAC/ 8 A resistive / 250 VDC / 0.3 A resistive||||||
|Switching current rate (resistive)|||||||NO / NC : 8A 250 V AC / 8 A 30 VDC @ 25°C||||||
||||||||NO / NC : 5A 250 V AC / 5 A 30 VDC @ 60°C||||||
|Minimum switching contact|||||||10 mA / 5 VDC||||||
|Maximum switching power (resistive)|||||||2000 VA / 80 W @ 25°C||||||
|Electrical life|||||||105cycles min at 250 VAC/ 8 A resistive||||||
|Maximum rate (at max switching power)|||||||360 cycles /hour||||||
|Mechanical life|||||||10 x 106cycles||||||
|Rated impulse voltage|||||||5 kV  (1.2/50µs)||||||
|Dielectric strength between coil / contacts|||||||IEC 60664-1: 5 kV /1 min / 1 mA / 50 Hz||||||
|Dielectric strength between open contacts|||||||2,5 kV /1 min / 1 mA / 50 Hz||||||
||||||||||||||
|Timing|||||||||||||
|Timing ranges (7 ranges)|||||||0.5→10s, 0.05→1min, 0.5→10min, 0.05→1h,||||||
||||||||0.5→10h, 0.05→1day, 0.5→10days||||||
|Minimum pulse duration typically (relay version)|||||||IEC 1812-1: 30 ms / 100 ms with load||||||
|Maximum reset time by de-energisation typically (relay version)|||||||IEC 1812-1: 120 ms||||||
|Repeatability|||||||IEC 1812-1: ≤ ± 0,5 %||||||
|Repetition accuracy with constant parameters|||||||IEC 1812-1: ≤ ± 10 %||||||
|Drift Temperature|||||||≤ ± 0.05 % / °C||||||
|Voltage-dependent drift|||||||≤ ± 0.2 % / V||||||



**I** Timers 

**I 02** 

**I** www.crouzet-control.com 

|Supply|Supply|
|---|---|
|Multi-voltage power supply|12→240 V∿/⎓|
|Operating range|15 %, +10 %|
|Operating frequency (Hz)|50 / 60 Hz ± 5 %|
|Galvanic isolation|No|
|Max. absorbed power|Approx. 3 VA (V∿) 1.5 W (V⎓)|
|Immunity from micro power cuts|10 ms|
|||
|General characteristics||
|Insulation voltage, IEC 60664-1|300 V|
|Installation category (acc. to IEC/EN 60664-1)|Overvoltage category III ; pollution degree 2|
|Impulse voltage CEI/EN 60664-1|4 kV (1,2 / 50 µs)|
|Clearance / Creepage distances|IEC 60664-1: 3 mm / 3.2 mm|
|Breakdown voltage|EN-61812-1: 2,5 kV / 1 min / 1 mA / 50 Hz|
|Insulation resistance|NFC 93 050: > 500 MΩ / 250 V⎓ / 1min|
|Status indication|Un: green LED blinks when count, continuous ON when supplied<br>R: yellow LED continuous ON when the relay is ON|
|Casing|DIN 43880: 17,5 mm|
|Fixing: Symmetrical DIN rail|EN 50022: 35 mm|
|Mounting position|All positions|
|Housing material|Enclosure plastic type UL94 - V0|
|Protection (IEC/EN 60529)|Housing: IP40 / Terminal block: IP20|
|Terminal capacity Single-wire without ferrule|IEC 60947-1<br>1 x 0.5 →3.3 mm² (AWG 20 →AWG 12)<br>2 x 0.5 →1.5 mm² (AWG 20 →AWG 16)|
|Max. tightening torque (Nm)|IEC 60947-1<br>0,5 N.m / 4,4 lbf.in|
|Operating temperature range (°C)|IEC 60068-2: -20 °C →+60 °C|
|Storage temperature range (°C)|IEC 60068-2: -40 °C →+70 °C|
|Relative humidity  no condensation acc. to IEC/EN 60068-2-30|93 % without condensation|
|Vibration resistance according to IEC/EN 60068-2-6|± 0.15 mm from 10 Hz →60 Hz 2g from 60 Hz →150 Hz|
|Impact resistance|IEC 60068-2-27<br>15gn - 11ms ; 3 x 6 axis (output OFF)<br>5gn - 11ms ; 3 x 6 axis (Output ON)|
|Drop to concrete floor|IEC 60068-2-32<br>High: 0.75m|
|Weight: casing 17,5 mm|70 g<br>80 g with packaging|
|Directives|2014/30/EU: EMC<br>2014/35/EU: low voltage|
|Certifications|CE - cULus  Listed Industrial Control Equipment - CCC|
|Conformity to standards|CEI 60664-1: Insulation coordination for equipment within low-voltage<br>systems<br>CEI 61812-1/ Specified time relays for industrial use<br>UL 60947-4-1/ Industrial Control Equipment (NRNT- Industrial Control<br>Switches)|
|Conformity with environmental directives|2015/863/UE: RoHS<br>1907/2006: Reach<br>2012/19/UE: WEEE|
|Electromagnetic compatibility IEC 61000-6-2, IEC 61000-6-3,<br>IEC 61000-6-4|Immunity for industrial environment<br>Emission residential environment<br>Emission industrial environment|
|Electromagnetic compatibility - Immunity to electrostatic discharges<br>acc to IEC/EN 61000-4-2|Level III Air ± 8 KV / Contact ± 6 KV|



**I** Timers 

**I 03** 

**I** www.crouzet-control.com 

## General characteristics 

|General characteristics|General characteristics|
|---|---|
|Immunity to radiated, radio-frequency, electromagnetic field acc.<br>IEC/EN 61000-4-3|Level III<br>10 V/m (80 M Hz to 1 G Hz) 80 % AM (1 k Hz)<br>3 V/m (1,4 →2 G Hz) 80 % AM (1K Hz)<br>1V/m (2 →2.7 G Hz) 80 % AM (1K Hz)|
|Immunity to rapid transient bursts acc. to IEC/EN 61000-4-4|Level III direct  ± 2 kV (power supply) / capacitive coupling clamp<br>± 1 KV (command input and outputs)|
|Immunity to shock waves on power supply acc. to IEC/EN 61000-4-5|Level III<br>line-to-earth ± 2 kV / line-to-line   ±  1kV|
|Immunity to radio frequency in common mode acc. to<br>IEC/EN 61000-4-6|Level III<br>10 Vrms (0,15 →80 M Hz) 80 % AM (1 k Hz)|
|Immunity to voltage dips and breaks acc. to IEC/EN 61000-4-11|Industrial Class II:<br>0 % residual voltage during 1cycle a.c. power ports<br>70 % residual voltage during 25/30 cycles a.c. power ports<br>0 % residual voltage, 250/300 cycles a.c. power ports<br>Residential:<br>0 % residual voltage during 10 cycle a.c.power ports<br>40 % residual voltage during 10 cycles a.c. power ports<br>70 % residual voltage during 10 cycles a.c. power ports<br>0 % residual voltage, 250/300 cycles a.c. power ports|
|Mains-borne and radiated emissions acc. to EN 55022 (CISPR22),<br>EN55011 (CISPR11)|EN 55022 / CISPR22 Class B (IT equipment)<br>EN 55011 / CISPR11 Class B, Group 1 (Medical equipment)|



Curves 

Function L U ~~Po~~ Asymmetrical timing, off start Y1 ~~LL~~ R1/R2 ~~| ES~~ Toff Ton Function Li U ~~Ld~~ Asymmetrical timing, pulse start Y1 ~~Po~~ R1/R2 Ton Toff ~~ee -——— ee~~ Connections 1 changeover relay output U A1 = Y1 for function L + A1 Y1 15 R A2 LEM! 16 18 eo - A1         Y1