BFP196WH6327XTSA1

**BFP196W** 

## **NPN Silicon RF Transistor*** 

- For low noise, low distortion broadband amplifiers in antenna and telecommunications systems up to 1.5 GHz at collector currents from 20 mA to 80 mA 

**==> picture [104 x 36] intentionally omitted <==**

**----- Start of picture text -----**<br>
3<br>2<br>4<br>1<br>**----- End of picture text -----**<br>


- Power amplifier for DECT and PCN systems 

- _f_ T = 7.5 GHz, _F_ = 1.3 dB at 900 MHz 

- Pb-free (RoHS compliant) package[1)] 

- Qualified according AEC Q101 

- Short term description 

## **ESD** ( **E** lectro **s** tatic **d** ischarge) sensitive device, observe handling precaution! 

|**Maximum Ratings**||||
|---|---|---|---|
|**Parameter**|**Symbol**<br>~~es~~|**Value**<br>~~es~~|**Unit**|
|Collector-emitter voltage|_V_CEO<br>a|12<br>|V|
|Collector-emitter voltage|_V_CES<br>es|20<br>es||
|Collector-base voltage|_V_CBO<br>ee<br>ee|20<br>ee<br>eee||
|Emitter-base voltage|_V_EBO<br>ee|2<br>eee||
|Collector current|_I_C<br>ee <br>es|150<br> eee<br>es|mA|
|Base current|_I_B|15||
|Total power dissipation2)<br>_T_S ≤69°C|_P_tot<br>||700<br>||mW|
|Junction temperature|_T_j<br>a<br>ee|150<br>a<br>eee|°C|
|Ambient temperature|j<br>_T_A<br>ee|-55 ... 150<br>eee||
|Storage temperature|_T_stg<br>ee<br>ee|-55 ... 150<br>eee<br>ee||



- 1Pb-containing package may be available upon special request 

> 2 _T_ S is measured on the collector lead at the soldering point to the pcb 

> 3For calculation of _R_ thJA please refer to Application Note Thermal Resistance 

2007-04-20 

1 

**BFP196W** 

## **Electrical Characteristics** at _T_ A = 25°C, unless otherwise specified 

|**Electrical Characteristics**at_T_A= 25°C,unless o|therwise s|pecified|pecified|pecified||
|---|---|---|---|---|---|
|**Parameter**|**Symbol**|**Values**|||**Unit**|
|||**min.**|**typ.**|**max.**||
|**DC Characteristics**||||||
|Collector-emitter breakdown voltage<br>_I_C= 1 mA,_I_B= 0|_V_(BR)CEO|12|-|-|V|
|Collector-emitter cutoff current<br>_V_CE= 20 V,_V_BE= 0|_I_CES|-|-|100|µA|
|Collector-base cutoff current<br>_V_CB= 10 V,_I_E= 0|_I_CBO|-|-|100|nA|
|Emitter-base cutoff current<br>_V_EB= 1 V,_I_C= 0|_I_EBO|-|-|1|µA|
|DC current gain-<br>_I_C= 50 mA,_V_CE= 8 V,pulse measured|_h_FE|70|100|140|-|



2007-04-20 

2 

**BFP196W** 

|**Electrical Characteristics**at_T_A= 25°C, unless otherwise specified|**Electrical Characteristics**at_T_A= 25°C, unless otherwise specified|**Electrical Characteristics**at_T_A= 25°C, unless otherwise specified|**Electrical Characteristics**at_T_A= 25°C, unless otherwise specified|**Electrical Characteristics**at_T_A= 25°C, unless otherwise specified|**Electrical Characteristics**at_T_A= 25°C, unless otherwise specified|
|---|---|---|---|---|---|
|**Parameter**|**Symbol**|**Values**|||**Unit**|
|||**min.**|**typ.**|**max.**||
|**AC Characteristics**(verified by random sampling)||||||
|Transition frequency<br>_I_C= 70 mA,_V_CE= 8 V,_f_= 500 MHz|_f_T|5|7.5|-|GHz|
|Collector-base capacitance<br>_V_CB= 10 V,_f_= 1 MHz,_V_BE= 0 ,<br>emitter grounded|_C_cb|-|0.86|1.3|pF|
|Collector emitter capacitance<br>_V_CE= 10 V,_f_= 1 MHz,_V_BE= 0 ,<br>base grounded|_C_ce|-|0.4|-||
|Emitter-base capacitance<br>_V_EB= 0.5 V,_f_= 1 MHz,_V_CB= 0 ,<br>collector grounded|_C_eb|-|3.9|-||
|Noise figure<br>_I_C= 20 mA,_V_CE= 8 V,_Z_S=_Z_Sopt,<br>_f_= 900 MHz<br>_I_C= 20 mA,_V_CE= 8 V,_Z_S=_Z_Sopt,<br>_f_= 1.8 GHz|_F_|-<br>-|1.3<br>2.3|-<br>-|dB|
|Power gain, maximum available1)<br>_I_C= 50 mA,_V_CE= 8 V,_Z_S=_Z_Sopt,<br>_Z_L=_Z_Lopt,_f_= 900 MHz<br>_I_C= 50 mA,_V_CE= 8 V,_Z_S=_Z_Sopt,<br>_Z_L=_Z_Lopt,_f_= 1.8 GHz|_G_ma|-<br>-|19<br>12.5|-<br>-||
|Transducer gain<br>_I_C= 50 mA,_V_CE= 8 V,_Z_S=_Z_L= 50Ω,<br>_f_= 900 MHz<br>_I_C= 50 mA,_V_CE= 8 V,_Z_S=_Z_L= 50Ω,<br>_f_= 1.8 GHz||_S_21e|2|-<br>-|13<br>7|-<br>-|dB|



> 1 _G_ ma = | _S_ 21 / _S_ 12| (k-(k²-1)1/2) 

2007-04-20 

3 

**BFP196W** 

## **SPICE Parameter (Gummel-Poon Model, Berkley-SPICE 2G.6 Syntax):** 

## **Transistor Chip Data:** 

|IS =|1.7264|fA|BF =|125|-|NF =|0.80012|-|
|---|---|---|---|---|---|---|---|---|
|VAF =|20|V|IKF =|0.4294|A|ISE =|119.22|fA|
|NE =|1.1766|-|BR =|10.584|-|NR =|0.94288|-|
|VAR =|3.8128|V|IKR =|0.019551|A|ISC =|4.8666|fA|
|NC =|0.88299|-|RB =|1.2907|Ω|IRB =|0.084011|mA|
|RBM =|1|Ω|RE =|0.75103|-|RC =|0.27137|Ω|
|CJE =|13.325|fF|VJE =|0.7308|V|MJE =|0.33018|-|
|TF =|23.994|ps|XTF =|0.44322|-|VTF =|0.1|V|
|ITF =|1.9775|mA|PTF =|0|deg|CJC =|1667|fF|
|VJC =|0.73057|V|MJC =|0.3289|-|XCJC =|0.29998|-|
|TR =|2.2413|ns|CJS =|0|fF|VJS =|0.75|V|
|MJS =|0|-|NK =|0|-|EG =|1.11|eV|
|XTI =|3|-|FC =|0.50922||TNOM|300|K|



All parameters are ready to use, no scalling is necessary. Extracted on behalf of Infineon Technologies AG by: Institut für Mobil- und Satellitentechnik (IMST) 

## **Package Equivalent Circuit:** 

**==> picture [319 x 224] intentionally omitted <==**

**==> picture [138 x 169] intentionally omitted <==**

**----- Start of picture text -----**<br>
L BI = 0.43 nH<br>L  = 0.47 nH<br>BO<br>L EI = 0.26 nH<br>L  = 0.12 nH<br>EO<br>L  = 0.06 nH<br>CI<br>L  = 0.36 nH<br>CO<br>C BE = 68 fF<br>C CB = 46 fF<br>C CE = 232 fF<br>Valid up to 6GHz<br>**----- End of picture text -----**<br>


For examples and ready to use parameters please contact your local Infineon Technologies distributor or sales office to obtain a Infineon Technologies CD-ROM or see Internet: http://www.infineon.com 

2007-04-20 

4 

**BFP196W** 

## **Total power dissipation** _P_ tot = ƒ( _T_ S) 

## **Permissible Pulse Load** _R_ thJS =  ƒ( _t_ p) 

**==> picture [488 x 273] intentionally omitted <==**

**----- Start of picture text -----**<br>
800  10 3<br>mW<br>K/W<br>600<br>10 2<br>500<br>400<br>0.5<br>0.2<br>300  10 1  0.1<br>0.05<br>0.02<br>200  0.01<br>0.005<br>D = 0<br>100<br>0 10 0<br>0 20 40 60 80 100 120 °C 150 10  [-7 ] 10  [-6 ] 10  [-5 ] 10  [-4 ] 10  [-3 ] 10  [-2 ] s 10  [0 ]<br> T S t p<br>tot thJS<br>P R<br>**----- End of picture text -----**<br>


## **Permissible Pulse Load** 

_P_ totmax/ _P_ totDC =  ƒ( _t_ p) 

**==> picture [233 x 273] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 2<br>-<br>D = 0<br>0.005<br>0.01<br>0.02<br>10 1  0.05<br>0.1<br>0.2<br>0.5<br>10 0<br>10  [-7 ] 10  [-6 ] 10  [-5 ] 10  [-4 ] 10  [-3 ] 10  [-2 ] s 10  [0 ]<br>t<br>p<br>totDC<br>P /totmax<br>P<br>**----- End of picture text -----**<br>


2007-04-20 

5 

**Package SOT343** 

**BFP196W** 

Package Outline 

**==> picture [216 x 130] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.9 ±0.1<br>2 [±0.2]<br>0.1 MAX.<br>1.3<br>0.1<br>A<br>4 3<br>0.15<br>1 2<br>0.3 [+0.1] -0.05 0.15 [+0.1] -0.05<br>4x 0.6 -0.05+0.1<br>0.1 M 0.2 M A<br>±0.1  ±0.1<br>2.1 0.1 MIN. 1.25<br>**----- End of picture text -----**<br>


Foot Print 

**==> picture [201 x 429] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.6<br>1.15<br>0.9<br>Manufacturer<br>2005, June<br>Date code (YM)<br>BGA420<br>Pin 1 Type code<br>4 0.2<br>Pin 1 2.15 1.1<br>0.8<br>1.6<br>8<br>2.3<br>**----- End of picture text -----**<br>


## Marking Layout (Example) 

## Standard Packing 

Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 

2007-04-20 

6 

**BFP196W** 

Edition 2006-02-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2007. All Rights Reserved. 

## **Attention please!** 

The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. 

## **Information** 

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( **www.infineon.com** ). 

## **Warnings** 

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. 

Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. 

Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 

2007-04-20 

7