BE24-1A66-M

iweStandex Gucunn = Engineered Solutions for 

A Global Leader .in the Design,. Development, and Manufacture of Sensor and Magnetic Components 

ELECTRONICS 

## Series Datasheet— BE Reed Relays 

## BE Series 

**==> picture [230 x 128] intentionally omitted <==**

**----- Start of picture text -----**<br>
www.standexmeder.com<br>k<<—— 33> °I< 10__r=)2<br>25.4 5.08<br>**----- End of picture text -----**<br>


» Features: Latching or High IR, Plastic or Metal Housing, High Life Expectancy, Variety of Pin Out Schemes 

- » Applications: General purpose, Test Equipment, Medical equipment& Others 

- » Markets: Telecommunications, Medical, Test & Measurement & Others 

## Part Description: BE 00-0X OO-X 

|Nominal Voltage|Contact QTY|Contact QTY|Contact|Form|Switch Model|Switch Model|Casing Option*|Casing Option*||
|---|---|---|---|---|---|---|---|---|---|
|05, 12, 24||1,2,3,4,5|A,B,C, E||31, 66, 85,|90||P, M, V||
|Customer Options||||||||||
|Rated Power (max.)||||10|100||10|W||
|Any DC combination of V&A notto|to exceed their individual||max.’s|||||||
|Switching Voltage (max.)<br>DCorpeakAC||||200|1,000||175|V||
|Switching Current(max.)<br>| DC or peakAC||||05<br>:|10<br>:|||05<br>,|A||
|Carry Current(max.)<br>DC or peakAC||||125<br>;|25<br>:||12<br>,|A||
|Contact Resistance (max.)||||||||||
|Breakdown Voltage (min.)<br>| Accordingto EN60255-5||||0.225<br>:|25<br>.|||0.2<br>.|KVDC||
|Operating Time (max.)<br>Incl. Bounce; Measured with w/|NominalVoltage|||0.5|1.1||0.7|ms||
|ReleaseTime (max.)<br>Measured with no Coil Excitation|||||0.1||15|||
|Insulation Resistance (typ.)<br>| Rh<45%, 100V TestVoltage||||102°|1022|||10°|Ohm||
|Capacitance (typ.)<br>@ 10kHz acrossopenSwitch||||0.2|0.5||1.0|pF||
|USA:<br>Standex<br>Europe:<br>/MEDER|<br>Asia:||+1.866.782.6339<br>+49,7731.8399.0<br>+86.21.37820625||salesusa@standexmeder.com<br>info@standexmeder.com<br>salesasia@standexmeder.com|||||.<br>eee<br>—_|



+49,7731.8399.0+1.866.782.6339 salesusa@standexmeder.cominfo@standexmeder.com +86.21.37820625 salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. 

4;= Standex /MEDER| 

¥; Standex —_— ae. Engineered Solutions for Tomorrow 

## A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components 

**==> picture [64 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
ELECTRONICS<br>**----- End of picture text -----**<br>


## Series Datasheet — BE Reed Relays 

## www.standexmeder.com 

||Coil|Data|Data|||||||
|---|---|---|---|---|---|---|---|---|---|
|c|ontact<br>Form|||switch<br>Switc<br>Model|CoilVoltage<br>(nom.)|Coil Resistance<br>(typ.)||Pull-In Voltage<br>(max.)|Drop-Out Voltage |Nominal CoilPower<br>(min.)<br>(typ.)||
|||||05|140 (345)|||3.5|0.75|179 (72)|
||||66|12|855 (2,145)||8.4|1.8|168 (67)|
||1A|||24<br>05|3,285 (7,845)<br>105 (140)|||16.8<br>3.5|3.6<br>0.75|175 (73)<br>238 (179)|
||||85|12|620 (1,000)|||8.4|1.8|232 (144)|
|||||24|1,400 (2,300)||16.8|3.6|411 (250)|
||1B|||12<br>24|(1,100)<br>(4,240)|||8.4<br>16.8|1.8<br>3.6|131<br>136|
||iC|||12|2,145|||8.4|1.8|67|
|||||24|7,845||16,8|3.6|73|
|||||12|445 (1,100)|||8.4|1.8|324 (131)|
|||||24|1,700 (4,240)||16.8|3.6|339 (136)|
||2A|||05|70 (110)|||3.5|0.75|357 (227)|
||||85|12|420 (600)||8.4|1.8|343 (240)|
|||||24|1,080 (1,600)|||16.8|3.6|533 (360)|
|||||05|49||3.5|0.25|510|
|2A+ 2B|||85|12|303||8.4|0.7|AT5|
||||||||||||
|||||24|1,140||16.8|1.4|505|



The Pull-In / Drop-Out Voltage and Coil Resistance will change at rate of 0.4% per °C. The figures in brackets are for realys in metal casing. 

**==> picture [491 x 131] intentionally omitted <==**

**----- Start of picture text -----**<br>
Environmental Data BE Reed Relay<br>Shock Resistance (max.) 50<br>1/2 sine wave duration 11ms 8<br>Vibration Resistance (max.) g ><br>Operating Temperature -20 to 70 °C Foe 4<br>Storage Temperature -35 to 95 °C ss ger ;<br>5 sec. max. |<br>| Soldering Temperature (max.) 60 °C [ a<br>**----- End of picture text -----**<br>


## Handling & Assembly Instructions 

- Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. 

- > External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays’ electrical characteristics. 

**==> picture [63 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Life; Test Data<br>**----- End of picture text -----**<br>


*Load increase reduces life expectancy of Reed Switches 

Load Life time salesusa@standexmeder.cominfo@standexmeder.com eee. salesasia@standexmeder.com —_ 

- Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. 

- Wave soldering: maximum 2607/5 seconds. 

- Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. 

**==> picture [63 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
all=Standex<br>IMEDER|<br>**----- End of picture text -----**<br>


Europe:USA: +49,7731.8399.0+1.866.782.6339 Asia: +86.21.37820625 

Modifications in the sense of technical progress are reserved. 

¥; Standex | Custom ae. Engineered Solutions for ELECTRONICS 

A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components 

## Series Datasheet— BE Reed Relays 

## www.standexmeder.com 

## Glossary Contact Form 

- Form A SPSTNO= =NormallySingle Pole OpenSingle ContactsThrow (—0 Form B NC = Normally. Closed. Contacts ih SPST = Single Pole Single Throw 

- | 

- Form c Changeover C_ Le REACH RoHS SPDT = Single Pole Double Throw ere 

## Pin Out 

**==> picture [501 x 291] intentionally omitted <==**

**----- Start of picture text -----**<br>
View from top of component<br>2.54mm [0.10"] pitch grid<br>10 11 14<br>Lt EERE pt tt tT Ptet<br>| 2b TTTN |(i2prht TT ay _|(|+ [Tees<br>ish gee BERSE Cee er eaak BEASE AEE) eee<br>Bourn (eee VTi tty Ki 7 BEDERABEALSares<br>| Kok | Kok BE POSEAseE ewes<br>LTE tT ete i te TT LTE te tee te EP REEPY TTT See ts<br>———p> ||P 4.5 kVDC pt EET TT TE ttt yt yt<br>ONLY WHEN USING THE Coil 1 Coil 2<br>MERCURY WETTED (88) SWITCH<br>15 20 23<br>(poo SEEEEEEEEEEEEEE [ttt Ttte<br>DSC {ABREUtt CeeSDGsn.<n>_EpaaeuEe L pitezt] ptttttPt| t TyPy<br>Dag See Sheun-<ne>—aneen Pde ge et<br>0== BSRRRRERS, Sen (seneeeces Ci) fT<br>Cee RTS<br>PTT TEE PPE TET Ee CS| Kee er<br>—_—__—-» UP COCO<br>ONLY WHEN USING THE<br>MERCURY WETTED (88) SWITCH<br>**----- End of picture text -----**<br>


**==> picture [61 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
all=Standex<br>[MEDER|<br>**----- End of picture text -----**<br>


Europe:USA: +49,7731.8399.0+1.866.782.6339 salesusa@standexmeder.cominfo@standexmeder.com eeeJared, Asia: +86.21.37820625 salesasia@standexmeder.com — Modifications in the sense of technical progress are reserved.