BC847BLP-7

**BC847BLP** — 

**45V NPN SMALL SIGNAL TRANSISTOR IN DFN1006** 

## **Features** 

## **Mechanical Data** 

   - Case: X1-DFN1006-3 

- BVCEO  > 45V 

   - Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 

- IC = 100mA High Collector Current 

- PD = 1000mW Power Dissipation 

   - Moisture Sensitivity: Level 1 per J-STD-020 

- 0.60mm[2] Package Footprint, 13 times Smaller than SOT23 

   - Terminals: Finish  NiPdAu. 

- 0.5mm Height Package Minimizing Off-Board Profile 

**==> picture [354 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
 Solderable per MIL-STD-202, Method 208   O e4<br> Weight: 0.0009 grams (Approximate)<br>C<br>X1-DFN1006-3<br>B<br>B C<br>E<br>es ©<br>E<br>Top View<br>Device Schematic<br>Bottom View  Device Symbol<br>**----- End of picture text -----**<br>


- Complementary PNP Type BC857BLP 

- **Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)** 

- **Halogen and Antimony Free. "Green" Device (Note 3)** 

- **Qualified to AEC-Q101 Standards for High Reliability** 

## **Ordering Information** (Note 4) 

||||||
|---|---|---|---|---|
|**Product**|**Marking**|**Reel size(inches)**|**Tape width(mm)**|**Quantity per reel**|
|BC847BLP-7|1F|7|8mm|3,000|
|BC847BLP-7B|1F|7|8mm|10,000|



- Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 

   2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 

   3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 

   4. For packaging details, go to our website at http://www.diodes.com. 

## **Marking Information** 

**==> picture [485 x 205] intentionally omitted <==**

**----- Start of picture text -----**<br>
1F From date code 1527 (YYWW),  1F<br>this changes to:<br>Top View  Top View<br>BC847BLP-7<br>Dot Denotes Collector Side Bar Denotes Base and Emitter Side<br>+p $+ + + -ee+ - >}<br>1F<br>Top View<br>Bar Denotes Base and Emitter Side<br>BC847BLP-7B  1F = Product Type Marking Code<br>$$$ $4<br>1F  1F  1F<br>1F  1F  1F<br>1F  1F  1F<br>**----- End of picture text -----**<br>


1 of 5 **www.diodes.com** 

BC847BLP Document number: DS30525 Rev. 12 - 2 

May 2015 © Diodes Incorporated 

**BC847BLP** 

## **Absolute Maximum Ratings** (@TA = +25°C, unless otherwise specified.) 

|**Absolute Maximum Ratingsgss** (@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Absolute Maximum Ratingsgss** (@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Absolute Maximum Ratingsgss** (@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Absolute Maximum Ratingsgss** (@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|
|---|---|---|---|
|||||
|**Characteristic**|**Symbol**|**Value**|**Unit**|
|Collector-Base Voltage|VCBO|50|V|
|Collector-Emitter Voltage|VCEO|45|V|
|Emitter-Base Voltage|VEBO|6.0|V|
|Collector Current|IC|100|mA|
|Peak Pulse Collector Current|ICM|200|mA|



## **Thermal Characteristics** (@TA = +25°C, unless otherwise specified.) 

|**Thermal Characteristics**(@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Thermal Characteristics**(@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Thermal Characteristics**(@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Thermal Characteristics**(@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|**Thermal Characteristics**(@TA = +25°C, unless otherwise specified.)A = +25°C, unless otherwise specified.)= +25°C, unless otherwise specified.)|
|---|---|---|---|---|
||||||
|**Characteristic**||**Symbol**|**Value**|**Unit**|
|Power Dissipation|(Note 5)|PD|400|mW|
||(Note 6)||1,000||
|Thermal Resistance, Junction to Ambient|(Note 5)|RJA|310|C/W|
||(Note 6)||120||
|Thermal Resistance, Junction to Lead|(Note 7)|RJL|120|°C/W|
|Operatingand Storage and Temperature Range||TJ, TSTG|-55 to +150|°C|



## **ESD Ratings** (Note 8) 

||||||
|---|---|---|---|---|
|**Characteristic**|**Symbol**|**Value**|**Unit**|**JEDEC Class**|
|Electrostatic Discharge - Human BodyModel|ESD HBM|4,000|V|3A|
|Electrostatic Discharge - Machine Model|ESD MM|200|V|B|



## **Electrical Characteristics** (@TA = +25°C, unless otherwise specified.) 

||||||||
|---|---|---|---|---|---|---|
|**Characteristic**|**Symbol**|**Min**|**Typ**|**Max**|**Unit**<br>**Test Condition**|**Test Condition**|
|Collector-Base Breakdown Voltage|BVCBO|50|—|—|V<br>I|IC= 100µA,IB= 0|
|Collector-Emitter Breakdown Voltage(Note 9)|BVCEO|45|—|—|V<br>I|IC= 10mA,IB= 0|
|Emitter-Base Breakdown Voltage|BVEBO|6|—|—|V<br>I|IE= 100µA,IC= 0|
|DC Current Gain|hFE|200|350|450|—<br>V|VCE= 5.0V,IC= 2.0mA|
|Collector-Emitter Saturation Voltage (Note 9)<br>~~a~~|VCE(sat)<br>~~a~~|—<br>~~a~~|80<br>200<br>~~a~~|250<br>600<br>~~a~~|mV<br>I<br>I<br>~~a~~|IC= 10mA, IB= 0.5mA<br>IC= 100mA,IB= 5.0mA<br>~~a~~|
|Base-Emitter Saturation Voltage (Note 9)<br>~~a~~|VBE(sat)<br>~~a~~|—<br>—<br>~~a~~|700<br>900<br>~~a~~|—<br>—<br>~~a~~|mV<br>I<br>I<br>~~a~~|IC= 10mA, IB= 0.5mA<br>IC= 100mA,IB= 5.0mA<br>~~a~~|
|Base-Emitter Voltage (Note 9)<br>~~a~~|VBE(ON)<br>~~a~~|580<br>—<br>~~a~~|640<br>725<br>~~a~~|700<br>770<br>~~a~~|mV<br>V<br>V<br>~~a~~|VCE= 5.0V, IC= 2.0mA<br>VCE= 5.0V,IC= 10mA<br>~~a~~|
|Collector-Cutoff Current<br>~~a~~|ICBO<br>~~a~~|—<br>—<br>~~a~~|—<br>—<br>~~a~~|15<br>5.0<br>~~a~~|nA<br>µA<br>V<br>V<br>~~a~~|VCB= 30V<br>VCB= 30V,TA= +150°C<br>~~a~~|
|Gain Bandwidth Product<br>~~———————E~~|fT<br>~~———————E~~|100<br>~~———————E~~|—<br>~~———————E~~|—<br>~~———————E~~|MHz<br>V<br>f = 100MHz<br>~~———————E~~|VCE= 5.0V, IC= 10mA,<br>f = 100MHz<br>~~———————E~~|
|Collector-Base Capacitance<br>~~———————E~~|CCBO<br>~~———————E~~|—<br>~~———————E~~|3.0<br>~~———————E~~|—<br>~~———————E~~|pF<br>V<br>~~———————E~~|VCB= 10V,f = 1.0MHz<br>~~———————E~~|



- Notes: 5. For the device mounted on minimum recommended pad layout 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in steady state condition. The entire exposed collector pad is attached to the heatsink. 

   6. Same as Note 5, except the exposed collector pad is mounted on 25mm x 25mm 2oz copper. 

   7. Thermal resistance from junction to solder-point (on the exposed collector pad). 

   8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 

   9. Measured under pulsed conditions. Pulse width ≤ 300µs.  Duty cycle ≤ 2%. 

2 of 5 **www.diodes.com** 

BC847BLP Document number: DS30525 Rev. 12 - 2 

May 2015 © Diodes Incorporated 

**BC847BLP** 

## **Typical Electrical Characteristics** (@TA = +25°C, unless otherwise specified.) 

**==> picture [227 x 438] intentionally omitted <==**

**----- Start of picture text -----**<br>
350<br>IC/IB = 20<br>300 IE<br>250 IE<br>200 a HH<br>TA = 125ºC<br>a<br>150 T A  = 85ºC<br>100 WY TA = 150ºC<br>———yf<br>TA = -55ºC<br>50<br>TA = 25ºC<br>0<br>1 10 100<br>IC, COLLECTOR CURRENT (mA)<br>Fig. 2  Typical Collector-Emitter Saturation Voltage<br>vs. Collector Current<br>1,000<br>rN<br>100<br>\<br>10 TT<br>NET<br>=F EEE<br>1<br>A<br>FEHR EH<br>0.1 oon Ch<br>1 10 100 1,000<br>IC, COLLECTOR CURRENT (mA)<br>Fig. 5 Typical DC Current Gain vs. Collector Current<br>, COLLECTOR-EMITTER<br>SATURATION VOLTAGE (mV)<br>V<br>(CE)SAT<br>, DC CURRENT GAIN<br>h<br>FE<br>**----- End of picture text -----**<br>


**==> picture [216 x 447] intentionally omitted <==**

**----- Start of picture text -----**<br>
1,000<br>TA = -55ºC<br>800<br>TA = 25ºC<br>600 TA = 85ºC<br>400<br>TA = 150ºC TA = 125ºC<br>200<br>VCE = 5V<br>0<br>0 2 4 6 8 10<br>IC, COLLECTOR CURRENT (mA)<br>Fig. 3 Typical Base-Emitter Turn-On Voltage<br>vs. Collector Current<br>1.0<br>0.9<br>0.8 po|<br>0.7<br>0.6<br>0.5 re|<br>et<br>0.4<br>0.30.2 FPIEE<br>0.1<br>0 ll<br>1 10 100<br>IC, COLLECTOR CURRENT (mA)<br>Fig. 4 Typical Base-Emitter Saturation Voltage<br>vs. Collector Current<br>(BE)SAT<br>, BASE-EMITTER SATURATION VOLTAGE (V)<br>V<br>, BASE-EMITTER TURN-ON VOLTAGE (mV)<br>BE(ON)<br>V<br>**----- End of picture text -----**<br>


3 of 5 **www.diodes.com** 

BC847BLP Document number: DS30525 Rev. 12 - 2 

May 2015 © Diodes Incorporated 

**BC847BLP** 

## **Package Outline Dimensions** 

Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. 

**==> picture [342 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>A1 X1-DFN1006-3<br>Dim  Min  Max Typ<br>Col Seating Plane gs A  0.47  0.53 0.50<br>A1  0.00 0.05 0.03<br>___ | D 1 b  0.10 0.20 0.15<br>Pin #1 ID b b2  0.45 0.55 0.50<br>D  0.95 1.075 1.00<br>E  0.55 0.675 0.60<br>e -  -  0.35<br>oa!ee Eee——— L1  0.20 0.30 0.25<br>E b2 e L2  0.20 0.30 0.25<br>L3  -  -  0.40<br>z  0.02  0.08 0.05<br>All Dimensions in mm<br>z<br>L2 L3 L1<br>**----- End of picture text -----**<br>


## **Suggested Pad Layout** 

Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. 

**==> picture [132 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
Y C<br>Y1<br>i=<br>G2<br>al X G1<br>X1<br>**----- End of picture text -----**<br>


|**Dimensions**|**Value(in mm)**|
|---|---|
|**C**|0.70|
|**G1**|0.30|
|**G2 **|0.20|
|**X**|0.40|
|**X1**|1.10|
|**Y**|0.25|
|**Y1**|0.70|



4 of 5 **www.diodes.com** 

BC847BLP Document number: DS30525 Rev. 12 - 2 

May 2015 © Diodes Incorporated 

**BC847BLP** 

## **IMPORTANT NOTICE** 

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). 

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others.  Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. 

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. 

Products described herein may be covered by one or more United States, international or foreign patents pending.  Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. 

This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. 

## **LIFE SUPPORT** 

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: 

- A.   Life support devices or systems are devices or systems which: 

   1. are intended to implant into the body, or 

   2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. 

- B.   A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. 

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated.  Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. 

Copyright © 2015, Diodes Incorporated 

**www.diodes.com** 

5 of 5 **www.diodes.com** 

BC847BLP Document number: DS30525 Rev. 12 - 2 

May 2015 © Diodes Incorporated