BAT-HLD-006-SMT

**==> picture [90 x 41] intentionally omitted <==**

**----- Start of picture text -----**<br>
[.130in| : r<br>**----- End of picture text -----**<br>


**==> picture [45 x 43] intentionally omitted <==**

**----- Start of picture text -----**<br>
—<br>**----- End of picture text -----**<br>


©2023 TE Connectivity. All Rights Reserved. 

8 

7 

6 

5 

4 

3 

2 

1 

**==> picture [645 x 284] intentionally omitted <==**

**----- Start of picture text -----**<br>
MNi Fyrp 100et00 | Detail A<br>D rr||} [ ~=QG0000000Z000000] — §<br>N<br>A REMAINING<br>TAPE LENGTH: CARRIER TAPE AND COVER TAPE<br>260 MIN PEEL ANGLE: 165° -180°<br>“ PEEL STREANGTH: 0. 1-1. ON<br>°60 MIN a Sy (260mm/min)<br>g>><br>10 UNITS ENCAPSULATED 400 PRODUCTS 10 UNITS<br>4<br><<<br>\\_ “orf OVERRUN LENGTH LENGTH OVERRUN LENGTH<br>Cc xy<br>**----- End of picture text -----**<br>


**==> picture [1135 x 671] intentionally omitted <==**

**----- Start of picture text -----**<br>
— D<br>N<br>A REMAINING<br>TAPE LENGTH: CARRIER TAPE AND COVER TAPE<br>260 MIN PEEL ANGLE: 165° -180°<br>“ PEEL STREANGTH: 0. 1-1. ON<br>°60 MIN a Sy (260mm/min)<br>g>><br>10 UNITS ENCAPSULATED 400 PRODUCTS 10 UNITS<br>4<br><<<br>\\_ “orf OVERRUN LENGTH LENGTH OVERRUN LENGTH<br>xy c<br>Re<br>4.0020.10 eo<br>| 28.00+0.10 sss) 7-2-5040. 3540.10<br>HO G<br>peer rsrer sees sees. FoPoOoPeE HR GPS GH15GHG 4 Te<br>"TsWD H in1 Joli I i)ioil) I :+<br>fp| iA TN VA I fp —\] ~ | B<br>( f ani Af /\ s G 3 i<br>ra \ C= \ N (dr \! (| (qr \ Y (qd \ o° a4 3 a<br>3 Ya Ya pa ae, |<br>NOTES: R K a b) 1?Ab| |iD 1DLP]<br>1. The cumulative allowable tolerance of the distance between ten holes of the ASO HS ESHOHSOOHOOHHOSHOHHHSHEOOHOHOOS<br>round hole is 0.2mm .15+0.30<br>2. The length of the belt is 250mm and the allowable bending degree is 1mm DEATAILA<br>3. The thickness of the material is measured at the edge of the carrier tape 130£0.15<br>4.  Allsize definitions follow the definitions of EIA-481-C series standards<br>5. Material: black PS T=0.35mm<br>6. Allreels are gray and blue hollowed out rotating plastic reels A<br>7. m he en range range is: t0.1mm; the cumulative error t0.1mm; the cumulative error the cumulative error cumulative error error is not not eae: 159 ORT LANE<br>8. | Thecalculatedchamferif Thecalculatedchamferifcalculatedchamferifchamferifif itR exceeds whereR exceeds where exceeds where where the250mmshape250mmshapeshape of the the cavity is not marked is 0.2-0.3; if the the InxX MERLIN, OR 97532<br>draft . a ° SIZE DWG. NO. REV<br>angle is not marked, not marked, marked, it is below 3 below 3 3 B BAT-HLD-006-SMT-TR A<br>SCALE: 2:1 DO NOT SCALE DRAWING SHEET 2 OF 2<br>8 7 b 5 4 3 2 1 LDCFDFB_B<br>**----- End of picture text -----**<br>


**==> picture [5 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
B<br>**----- End of picture text -----**<br>


5. Material: black PS T=0.35mm A 6. Allreels are gray and blue hollowed out rotating plastic reels 7. m he en range range is: t0.1mm; the cumulative error t0.1mm; the cumulative error the cumulative error cumulative error error is not not 8. | Thecalculatedchamferif Thecalculatedchamferifcalculatedchamferifchamferifif itR exceeds whereR exceeds where exceeds where where the250mmshape250mmshapeshape of the the cavity is not marked is 0.2-0.3; if the the draft . a ° angle is not marked, not marked, marked, it is below 3 below 3 3