BA159+
Standard Recovery Diode, 1 kV, 1 A, Single, 1.3 V, 250 ns, 30 A
- Manufacturer: MULTICOMP PRO
- Product type: Standard Recovery Rectifier Diodes
- No. of Pins: 2Pins
- Diode Case Style: DO-41 (DO-204AL)
- Diode Configuration: Single
- Forward Voltage Max: 1.3V
- Forward Surge Current: 30A
- Reverse Recovery Time: 250ns
- Average Forward Current: 1A
- Operating Temperature Max: 150°C
- Repetitive Peak Reverse Voltage: 1kV
| Delivery and price | |
|---|---|
| Units per pack | 5000 |
| Price | 0.013 € |
| Current stock | 10+ |
| Lead time | 30 days |
## **Fast Diode** ## **Features:** - High surge current capability - Void-free plastic in a DO-41 package - 1A operation at TA = 55°C with no thermal runaway - Fast switching for high efficiency - Exceeds environmental standards of MIL-S-19500/228 ## **Specifications:** ## **Mechanical Data:** Case : Moulded plastic, DO-41 Terminals : Axial leads, solderable per MIL-STD-202, Method 208 Polarity : Colour band denotes cathode Mounting position : Any Weight : 0.012 oz, 0.3g ## **Maximum Ratings and Electrical Characteristics:** Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. |**Parameters**|**BA157+**|**BA159+**|**Units**| |---|---|---|---| |Maximum Recurrent Peak Reverse Voltage|400|1,000|V| |Maximum RMS Voltage|280|700|| |Maximum DC Blocking Voltage|400|1,000|| |Maximum Average Forward Rectified<br>Current 0.375" (9.5mm) Lead Length at TA= 55°C|1||A| |Peak Forward Surge Current 8.3ms Single Half Sine-Wave<br>Superimposed on Rated Load (JEDEC Method)|30||| |Maximum Forward Voltage at 1A|1.3||V| |Maximum reverse current TJ= 25°C<br>at rated DC blocking voltage TJ= 100°C|5<br>500||µA| Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Page <1> 11/09/19 V1.0 ## **Fast Diode** |**Parameters**|**BA157+**|**BA159+**|**Units**| |---|---|---|---| |Typical Junction Capacitance (Note 1)|12||pF| |Maximum reverse recovery time (Note 2)|150|250|nS| |Operating and Storage Temperature Range|-50 to +150||°C| ## **Notes:** 1. Measured at 1MHz and applied reverse voltage of 4V. 2. Reverse recovery test conditions: IF = 0.5A, IR = 1A, IRR = 0.25A. ## **Ratings and Characteristic Curves** ## **Figure 1 - Reverse Recovery Time Characteristics and Test Circuit Diagram** **==> picture [210 x 108] intentionally omitted <==** ## **Notes:** 1. Rise Time = 7nS maximum Input Impedance = 1MΩ, 22pF **==> picture [144 x 123] intentionally omitted <==** 2. Rise Time = 10nS maximum Source Impedance = 50Ω **==> picture [191 x 142] intentionally omitted <==** **==> picture [198 x 143] intentionally omitted <==** Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 11/09/19 V1.0 Page <2> ## **Fast Diode** ## **Dimensions:** ## **Part Number Table** Dimensions : Inches (Millimetres) |**Part Number Table**|| |---|---| |**Description**|**Part Number**| |Diode, Fast, 1A, 400V|BA157+| |Diode, Fast, 1A, 1,000V|BA159+| **Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 11/09/19 V1.0 Page <3>
Updated at February 9, 2023
Multicomp Pro is a trusted manufacturer of high-quality electronic components, built upon the rich heritage of established industry names such as SPC Technology, Tenma, Duratool, and Pro Power. Developed to provide engineers and procurement professionals with exceptional value, the brand offers an extensive portfolio of rigorously lab-tested products. By combining strict quality assurance with cost-effective manufacturing, Multicomp Pro delivers premium reliability while providing significant savings compared to leading industry alternatives. The brand's comprehensive lineup is anchored by a vast selection of passive components and essential circuit protection devices. Engineers consistently rely on Multicomp Pro for aluminum electrolytic capacitors, film capacitors, and power inductors designed for demanding applications. The protection portfolio is equally robust, featuring hundreds of standard fuses, resettable fuses, and transient voltage suppression (TVS) diodes to safeguard critical circuitry. Furthermore, the company is a major provider of precision timing solutions, including a wide array of reliable crystals and standard oscillators. Beyond passives and board-level protection, Multicomp Pro offers extensive solutions in power management, discrete semiconductors, and connectivity. This includes highly efficient AC/DC converters, bridge rectifiers, bipolar transistors, and a versatile selection of wire-to-board terminal blocks. Backed by comprehensive factory audits, continuous laboratory testing, and a strong commitment to ethical sourcing, Multicomp Pro ensures that every component consistently meets stringent international safety and performance standards.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →