B88069X4241S102

## **Surge arrester** 

## 2-electrode arrester 

**Series/Type: EM3600XS Ordering code: B88069X4241xxxx[a)]** Version/Date: Issue 05 / 2006-07-25 

> © EPCOS AG 2006. Reproduction, publication and dissemination of this document, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. 

**B88069X4241xxxx[a)] EM3600XS** 

**Surge arrester** 

**2-electrode arrester** 

## **Features** 

Very small size Extremely fast response time Stable performance over life Extremely low capacitance High insulation resistance RoHS-compatible 

## **Applications** 

Modem XDSL-splitter Station protection Consumer electronics Tuner 

## **Electrical specifications** 

|**Electrical specifications**|||
|---|---|---|
|DC spark-over voltage1) 2)|3600<br>±15|V<br>%|
|Impulse spark-over voltage<br>at 100 V/µs<br>- for 99 % of measured values<br>- typical values of distribution<br>at 1 kV/µs<br>- for 99 % of measured values<br>- typical values of distribution<br>at 5 kV/µs<br>- for 99 % of measured values<br>- typical values of distribution|< 4350<br>< 4150<br>< 4500<br>< 4300<br>< 5000<br>< 4500|V<br>V<br>V<br>V<br>V<br>V|
|Service life3)<br>10 operations<br>8/20 µs<br>1000 operations<br>8/20µs|2<br>100|kA<br>A|
|Insulation resistance at 100 Vdc|> 1|GΩ|
|Capacitance at 1 MHz|< 1|pF|
|Arc voltage at 1 A<br>Glow to arc transition current<br>Glow voltage|~ 15<br>< 1<br>~ 140|V<br>A<br>V|
|Weight|~ 1|g|
|Operation and storage temperature|-40 ... +90|°C|
|Climatic category (IEC 60068-1)|40/ 90/ 21<br>**EM 3600 YY O**<br>EM<br>- Series<br>3600<br>- Nominal voltage<br>YY<br>- Year of production<br>O<br>- Non radioactive<br>EPCOS||
|Marking, red positive|||



- a) xxxx =  S102 (100 pcs on 5 taped stripes) 

=  T502 (500 pcs on tape and reel) 

- 1) At delivery AQL 0.65 level II, DIN ISO 2859 

- 2) In ionized mode 

> 3) Arrester has to meet: Voltage withstand test  AC 1500 V, 1min 

and  AC 1800 V, 1 s 

Terms in accordance with ITU-T Rec. K.12 and DIN 57845/VDE0845 

KB AB E / KB AB PM 

Issue 05 / 2006-07-25 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 2 of 4 

**B88069X4241xxxx[a)] EM3600XS** 

## **Surge arrester** 

**2-electrode arrester** 

## **Dimensional drawing** 

_Not to scale Dimensions in mm Non controlled document_ 

## **Cautions and warnings** 

Surge arresters must not be operated directly in power supply networks. 

Surge arresters may become hot in the event of longer periods of current stress (danger of burning). 

Surge arresters may be used only within their specified values. In the event of overload, the head contacts may fail or the component may be destroyed. 

Damaged surge arresters must not be re-used. 

KB AB E / KB AB PM 

Issue 05 / 2006-07-25 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 3 of 4 

**Important notes** 

The following applies to all products named in this publication: 

1. Some parts of this publication contain **statements about the suitability of our products for certain areas of application** . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out **that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application.** As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 

2. We also point out that **in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.** In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 

**3. The warnings, cautions and product-specific notes must be observed** . 

4. In order to satisfy certain technical requirements, **some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as “hazardous”)** . Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 

5. We constantly strive to improve our products. Consequently, **the products described in this publication may change from time to time** . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. 

We also **reserve the right to discontinue production and delivery of products** . Consequently, we cannot guarantee that all products named in this publication will always be available. 

6. Unless otherwise agreed in individual contracts, **all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI)** . 

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap, are **trademarks registered or pending** in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 

Page 4 of 4