B72214P2231K101

**==> picture [195 x 50] intentionally omitted <==**

## **SIOV metal oxide varistors** 

Leaded varistors, AdvanceD-MP, S14 series 

**Series/Type: B722*** Date: May 2017 

© EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. 

EPCOS AG is a TDK Group Company. 

**Leaded varistors B722* AdvanceD-MP, S14 series** 

## **Construction** 

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

Round varistor element, leaded 

Coating: epoxy resin, flame-retardant to UL 94 V-0 

## **Features** 

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

Wide operating voltage range 130 ... 680 VRMS 

- All types duty cycle @ 6 kV/ 3 kA = >10 pulses, according to IEC 60950-1, Annex Q; IEC 61051-2 

All types Inom @ 3 kA = >15 impulses according to UL 1449, 3[rd] edition surge current generator (8/20 µs), type 2 listed 

Multiple pulse handling capability 

## **Approvals** 

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

UL CSA VDE IEC 

## **Delivery mode** 

**==> picture [5 x 5] intentionally omitted <==**

**==> picture [5 x 5] intentionally omitted <==**

Bulk (standard), taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors. 

## **General technical data** 

|Climatic category<br>to IEC 60068-1<br>Operating temperature<br>to IEC 61051<br>Storage temperature<br>Electric strength<br>to IEC 61051<br>Insulation resistance<br>to IEC 61051<br>Response time|40/105/56<br>�40 ... +105<br>�40 ... +125<br>≥2.5<br>≥100<br>< 25|°C<br>°C<br>kVRMS<br>MΩ<br>ns|
|---|---|---|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 2 of 23 

**Leaded varistors AdvanceD-MP, S14 series** 

## **B722*** 

## **Electrical specifications and ordering codes Maximum ratings (TA = 105** ° **C)** 

|**Maximum ratings (TA = **|**105 **°**C)**||||||
|---|---|---|---|---|---|---|
|Ordering code|Type<br>(untaped)<br>SIOV-|VRMS<br>V|VDC<br>V|imax<br>(8/20 µs)<br>A|Wmax<br>(2 ms)<br>J|Pmax<br>W|
|B72214P2131K101<br>B72214P2141K101<br>B72214P2151K101<br>B72214P2171K101<br>B72214P2211K101<br>B72214P2231K101<br>B72214P2251K101<br>B72214P2271K101<br>B72214P2301K101<br>B72214P2321K101<br>B72214P2351K101<br>B72214P2381K101<br>B72214P2421K101<br>B72214P2461K101<br>B72214P2511K101<br>B72214P2551K101<br>B72214P2621K101<br>B72214P2681K101|S14K130E2K1<br>S14K140E2K1<br>S14K150E2K1<br>S14K175E2K1<br>S14K210E2K1<br>S14K230E2K1<br>S14K250E2K1<br>S14K275E2K1<br>S14K300E2K1<br>S14K320E2K1<br>S14K350E2K1<br>S14K385E2K1<br>S14K420E2K1<br>S14K460E2K1<br>S14K510E2K1<br>S14K550E2K1<br>S14K620E2K1<br>S14K680E2K1|130<br>140<br>150<br>175<br>210<br>230<br>250<br>275<br>300<br>320<br>350<br>385<br>420<br>460<br>510<br>550<br>625<br>680|170<br>180<br>200<br>225<br>270<br>300<br>270<br>350<br>385<br>420<br>460<br>505<br>560<br>615<br>670<br>745<br>825<br>895|6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000<br>6000|60.0<br>65.0<br>70.0<br>80.0<br>95.0<br>105.0<br>115.0<br>130.0<br>140.0<br>150.0<br>165.0<br>180.0<br>190.0<br>200.0<br>200.0<br>220.0<br>240.0<br>260.0|0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60<br>0.60|



## **Characteristics (TA = 25** ° **C)** 

|Ordering code|Type<br>(untaped)<br>SIOV-|Vv<br>(1 mA)<br>V|∆Vv<br>(1 mA)<br>%|vc,max<br>(ic)<br>V|ic<br>A|Ctyp<br>(1 kHz)<br>pF|
|---|---|---|---|---|---|---|
|B72214P2131K101<br>B72214P2141K101<br>B72214P2151K101<br>B72214P2171K101<br>B72214P2211K101<br>B72214P2231K101<br>B72214P2251K101<br>B72214P2271K101<br>B72214P2301K101<br>B72214P2321K101<br>B72214P2351K101<br>B72214P2381K101<br>B72214P2421K101<br>B72214P2461K101<br>B72214P2511K101<br>B72214P2551K101<br>B72214P2621K101<br>B72214P2681K101|S14K130E2K1<br>S14K140E2K1<br>S14K150E2K1<br>S14K175E2K1<br>S14K210E2K1<br>S14K230E2K1<br>S14K250E2K1<br>S14K275E2K1<br>S14K300E2K1<br>S14K320E2K1<br>S14K350E2K1<br>S14K385E2K1<br>S14K420E2K1<br>S14K460E2K1<br>S14K510E2K1<br>S14K550E2K1<br>S14K620E2K1<br>S14K680E2K1|205<br>220<br>240<br>270<br>330<br>360<br>390<br>430<br>470<br>510<br>560<br>620<br>680<br>750<br>820<br>910<br>1000<br>1100|±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10<br>±10|340<br>360<br>395<br>455<br>545<br>595<br>650<br>710<br>775<br>840<br>910<br>1025<br>1120<br>1240<br>1355<br>1500<br>1650<br>1815|50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0<br>50.0|1100<br>1000<br>900<br>800<br>690<br>630<br>580<br>530<br>485<br>445<br>410<br>390<br>355<br>320<br>300<br>265<br>240<br>220|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 3 of 23 

**Leaded varistors AdvanceD-MP, S14 series** 

**B722*** 

**==> picture [44 x 41] intentionally omitted <==**

## **Dimensional drawings** 

## **Weight** 

|**Weight**|||
|---|---|---|
|Nominal diameter<br>mm|VRMS<br>V|Weight<br>g|
|14|130 ... 680|1.8 ... 5.4|



The weight of varistors in between these voltage classes can be interpolated. 

**==> picture [37 x 34] intentionally omitted <==**

## **Dimensions** 

|**Dimensions**||||||||
|---|---|---|---|---|---|---|---|
|Ordering code|[e]±1<br>mm|a±1<br>mm|wmax<br>mm|thmax<br>mm|hmax<br>mm|lmin<br>mm|d±0.05<br>mm|
|B72214P2131K101<br>B72214P2141K101<br>B72214P2151K101<br>B72214P2171K101<br>B72214P2211K101<br>B72214P2231K101<br>B72214P2251K101<br>B72214P2271K101<br>B72214P2301K101<br>B72214P2321K101<br>B72214P2351K101<br>B72214P2381K101<br>B72214P2421K101<br>B72214P2461K101<br>B72214P2511K101<br>B72214P2551K101<br>B72214P2621K101<br>B72214P2681K101|7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5|2.0<br>2.1<br>2.2<br>2.4<br>2.7<br>2.9<br>3.0<br>3.2<br>3.5<br>3.7<br>4.1<br>4.4<br>4.7<br>5.1<br>5.4<br>5.9<br>6.4<br>7.0|16.0<br>16.0<br>16.0<br>16.0<br>16.0<br>16.0<br>16.0<br>16.0<br>16.0<br>16.0<br>16.5<br>16.5<br>16.5<br>16.5<br>17.0<br>17.0<br>17.0<br>17.0|4.7<br>4.8<br>4.9<br>5.1<br>5.4<br>5.6<br>5.7<br>5.9<br>6.1<br>6.3<br>6.7<br>7.7<br>8.2<br>8.5<br>8.9<br>9.4<br>9.9<br>10.5|20.0<br>20.0<br>20.0<br>20.0<br>20.0<br>20.0<br>20.0<br>20.0<br>20.0<br>20.0<br>20.5<br>20.5<br>20.5<br>20.5<br>21.0<br>21.0<br>21.0<br>21.0|25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0<br>25.0|0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8<br>0.8|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 4 of 23 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



|**Reliability data**|||
|---|---|---|
|Test|Test methods/conditions|Requirement|
|Varistor voltage|The voltage between two terminals with<br>the specified measuring current applied<br>is called VV (1 mADC@ 0.2 ... 2 s).|To meet the specified value|
|Clamping voltage|The maximum voltage between two<br>terminals with the specified standard<br>impulse current(8/20µs)applied.|To meet the specified value|
|Endurance at upper<br>category temperature|1000 h at UCT<br>After having continuously applied the<br>maximum allowable AC voltage at UCT<br>±2°C for 1000 h, the specimen shall be<br>stored at room temperature and normal<br>humidity for 1 to 2 h.<br>Thereafter, the change of VVshall be<br>measured.||∆V/V (1 mA)|≤10%|
|Surge current derating,<br>8/20µs|10 surge currents (8/20µs), unipolar,<br>interval 30 s, amplitude corresponding<br>to derating curve for 10 impulses at<br>20µs||∆V/V (1 mA)|≤10%<br>(measured in direction of<br>surge current)<br>No visible damage|
|Surge current derating,<br>2 ms|10 surge currents (2 ms), unipolar,<br>interval 120 s, amplitude corresponding<br>to derating curve for 10 impulses at<br>2 ms||∆V/V (1 mA)|≤10%<br>(measured in direction of<br>surge current)<br>No visible damage|
|Electric strength|IEC 61051-1, test 4.9.2<br>Metal balls method, 2500 VRMS, 60 s<br>The varistor is placed in a container<br>holding 1.6±0.2 mm diameter metal<br>balls such that only the terminations of<br>the varistor are protruding.<br>The specified voltage shall be applied<br>between both terminals of the specimen<br>connected together and the electrode<br>inserted between the metal balls.|No breakdown|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 5 of 23 

**==> picture [44 x 41] intentionally omitted <==**

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



|Test|Test methods/conditions|Requirement|
|---|---|---|
|Climatic sequence|The specimen shall be subjected to:<br>a) dry heat at UCT, 16 h, IEC<br>60068-2-2, test Ba<br>b) damp heat, 1st cycle:<br>55°C, 93% r. H., 24 h, IEC<br>60068-2-30, test Db<br>c) cold, LCT, 2 h, IEC 60068-2-1, test<br>Aa<br>d) damp heat, additional 5 cycles:<br>55°C/25°C, 93% r. H., 24 h/cycle,<br>IEC 60068-2-30, test Db.<br>Then the specimen shall be stored at<br>room temperature and normal humidity<br>for 1 to 2 h.<br>Thereafter, the change of VVshall be<br>measured. Thereafter, insulation resis-<br>tance Rinsshall be measured at V = 500<br>V.||∆V/V (1 mA)|≤10%<br>Rins≥100 MΩ|
|Rapid change of<br>temperature|IEC 60068-2-14, test Na, LCT/UCT,<br>dwell time 30 min, 5 cycles||∆V/V (1 mA)|≤5%<br>No visible damage|
|Damp heat, steady state|IEC 60068-2-78, test Ca<br>The specimen shall be subjected to<br>40±2°C, 90 to 95% r. H. for 56 days<br>without load / with 10% of the maxi-<br>mum continuous DC operating voltage<br>VDC. Then stored at room temperature<br>and normal humidity for 1 to 2 h.<br>Thereafter, the change of VVshall be<br>measured. Thereafter, insulation resis-<br>tance Rinsshall be measured at V = 500<br>V(insulated varistors only).||∆V/V (1 mA)|≤10%<br>Rins≥100 MΩ|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 6 of 23 

|||**B722***|
|---|---|---|
|**Leaded varistors**||**B722***|
|**AdvanceD-MP, S14 series**|||
||||
|Test|Test methods/conditions|Requirement|
|Solderability|IEC 60068-2-20, test Ta,<br>method 1 with modified conditions for<br>lead-free solder alloys: 245°C, 3 s:<br>After dipping the terminals to a depth of<br>approximately 3 mm from the body in a<br>soldering bath of 245°C for 3 s, the<br>terminals shall be visually examined.|The inspection shall be<br>carried out under adequate<br>light with normal eyesight or<br>with the assistance of a<br>magnifier capable of giving<br>a magnification of 4 to<br>10 times. The dipped<br>surface shall be covered<br>with a smooth and bright<br>solder coating with no more<br>than small amounts of<br>scattered imperfections<br>such as pinholes or<br>un-wetted or de-wetted<br>areas. These imperfections<br>shall not be concentrated in<br>one area.|
|Resistance to soldering<br>heat|IEC 60068-2-20, test Tb, method 1A,<br>260°C, 10 s:<br>Each lead shall be dipped into a solder<br>bath having a temperature of 260±5°C<br>to a point 2.0 to 2.5 mm from the body<br>of the specimen, be held there for<br>10±1 s and then be stored at room<br>temperature and normal humidity for<br>1 to 2 h.<br>The change of VVshall be measured<br>and the specimen shall be visually<br>examined.||∆V/V (1 mA)|≤5%<br>No visible damage|
|Tensile strength|IEC 60068-2-21, test Ua1<br>After gradually applying the force<br>specified below and keeping the unit<br>fixed for 10 s, the terminal shall be<br>visually examined for any damage.<br>Force for wire diameter:<br>0.6 mm = 10 N<br>0.8 mm = 10 N<br>1.0 mm = 20 N||∆V/V (1 mA)|≤5%<br>No break of solder joint,<br>no wire break|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 7 of 23 

**==> picture [44 x 41] intentionally omitted <==**

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



|Test|Test methods/conditions|Requirement|
|---|---|---|
|Vibration|IEC 60068-2-6, test Fc, method B4<br>Frequency range:<br>Amplitude:<br>Duration:<br>Pulse:<br>10 … 55 Hz<br>0.75 mm or 98 m/s2<br>6 h (3 · 2 h)<br>sine wave<br>After repeatedly applying a single<br>harmonic vibration according to the<br>table above.<br>The change of VVshall be measured<br>and the specimen shall be visually<br>examined.||∆V/V (1 mA)|≤5%<br>No visible damage|
|Bump|IEC 60068-2-29, test Eb<br>Pulse duration:<br>Max. acceleration:<br>Number of bumps:<br>Pulse:<br>6 ms<br>400 m/s2<br>4000<br>half sine||∆V/V (1 mA)|≤5%<br>No visible damage|
|Fire hazard|IEC 60695-11-5 (needle flame test)<br>Severity: vertical 10 s|5 s max.|



## **Note:** 

UCT = Upper category temperature LCT = Lower category temperature Rins = Insulation resistance 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 8 of 23 

**Leaded varistors AdvanceD-MP, S14 series** 

**B722*** 

## **v/i characteristics** 

v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances 

**==> picture [52 x 165] intentionally omitted <==**

**==> picture [36 x 153] intentionally omitted <==**

## **SIOV-S14 ... E2K1** 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 9 of 23 

**Leaded varistors** 

**B722*** 

**==> picture [44 x 41] intentionally omitted <==**

## **AdvanceD-MP, S14 series** 

## **Derating curves** 

Maximum surge current imax = f (tr, pulse train) 

For explanation of the derating curves refer to "General technical information", section 1.8.1 

## **SIOV-S14K130 ... K460E2K1** 

**SIOV-S14K510 ... K680E2K1** 

Please read _Cautions and warnings_ and Page 10 of 23 _Important notes_ at the end of this document. 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **Taping, packaging and lead configuration** 

## **1 EPCOS ordering code system** 

## **For leaded varistors** 

**==> picture [347 x 379] intentionally omitted <==**

**----- Start of picture text -----**<br>
B722 10 S 2 271 K 1 0 1<br>Monolithic<br>varistor<br>Nominal<br>disc diameter<br>Design:<br>S  =  Leaded varistor<br>T = ThermoFuse<br>F = Fail-safe varistor<br>Q = EnergetiQ<br>Series:<br>0 = StandarD<br>1 = Automotive<br>2 = AdvanceD<br>3 = SuperioR<br>4 = SuperioR<br>Max. AC operating voltage:<br>271 = 27 � 10 [1] = 275 VAC<br>140 = 14 � 10 [0] = 14 VAC<br>141 = 14 � 10 [1] = 140 VAC<br>Tolerance of varistor voltage:<br>K =  ± 10%<br>J =  ± 5%<br>S = Special tolerance<br>Lead configuration:<br>1 = Straight leads<br>2 thru 5 = Kinked form<br>Packaging:<br>0 = Bulk,<br>1 thru 7 = Taping style<br>Internal coding:<br>1 = Standard<br>**----- End of picture text -----**<br>


Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 11 of 23 

**==> picture [44 x 41] intentionally omitted <==**

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **2 Taping and packaging of leaded varistors** 

Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. 

## **2.1 Taping in accordance with IEC 60286-2 for lead spacing 5.0 mm** 

**==> picture [40 x 44] intentionally omitted <==**

**==> picture [146 x 121] intentionally omitted <==**

**==> picture [88 x 57] intentionally omitted <==**

## **2.2 Taping based on IEC 60286-2 for lead spacing 7.5 and 10 mm** 

**==> picture [313 x 159] intentionally omitted <==**

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 12 of 23 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **2.3 Tape dimensions (in mm)** 

|Sym-<br>bol|= 5.0|Tolerance|= 7.5|Tolerance|= 10.0|Tolerance|Remarks|
|---|---|---|---|---|---|---|---|
|w<br>th<br>d|0.6|max.<br>max.<br>±0.05|0.8|max.<br>max.<br>±0.05|1.0|max.<br>max.<br>±0.05|see tables in<br>each series<br>under<br>"Dimensions"|
|P0<br>P1|12.7<br>3.85|±0.3<br>±0.7|12.71)<br>8.95|±0.3<br>±0.8|12.7<br>7.7|±0.3<br>±0.8|±1 mm/20<br>sprocket holes|
|F<br>∆h<br>∆p|5.0<br>0<br>0|+0.6/�0.1<br>±2.0<br>±1.3|7.5<br>depends o<br>0|±0.8<br>n s<br>±2.0|10.0<br>depends on<br>0|±0.8<br>s<br>±2.0|measured at<br>top of compo-<br>nent body|
|W<br>W0<br>W1<br>W2|18.0<br>5.5<br>9.0<br>3.0|±0.5<br>min.<br>±0.5<br>max.|18.0<br>11.0<br>9.0<br>3.0|±0.5<br>min.<br>+0.75/�0.5<br>max.|18.0<br>11.0<br>9.0<br>3.0|±0.5<br>min.<br>+0.75/�0.5<br>max.|Peel-off<br>force<br>>5 N|
|H<br>H0<br>H1|18.0<br>16.0<br>(18.0)<br>32.2|+2.0/�0<br>±0.5<br>max.|18.0<br>16.0<br>(18.0)<br>45.0|+2.0/�0<br>±0.5<br>max.|18.0<br>16.0<br>45.0|+2.0/�0<br>±0.5<br>max.|2)<br>3)|
|D0<br>t<br>L<br>l|4.0<br>0.9<br>11.0<br>4.0|±0.2<br>max.<br>max.<br>max.|4.0<br>0.9<br>11.0|±0.2<br>max.<br>max.|4.0<br>0.9<br>11.0|±0.2<br>max.<br>max.|without lead|



1) Taping with P0 = 15.0 mm upon request 

2) Applies only to uncrimped types 

3) Applies only to crimped types (H0 = 18 upon request) 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 13 of 23 

**==> picture [44 x 41] intentionally omitted <==**

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **2.4 Taping mode** 

Example: B72210S0271K1 **5** 1 | Digit 14 

|Digit 14|Taping<br>mode|Reel type|Seating plane height H0<br>for crimped types<br>mm|Seating plane height H<br>for uncrimped types<br>mm|Pitch distance<br>P0<br>mm|
|---|---|---|---|---|---|
|0<br>1<br>2<br>3<br>4<br>5<br>6<br>7|�<br>G<br>G2<br>G3<br>G4<br>G5<br>GA<br>G2A|Bulk<br>I<br>I<br>II<br>II<br>III<br>Ammo pack<br>Ammopack|�<br>16<br>18<br>16<br>18<br>16<br>16<br>18|�<br>18<br>�<br>18<br>�<br>18<br>18<br>�|�<br>12.7<br>12.7<br>12.7<br>12.7<br>12.7<br>12.7<br>12.7|
|Internal codingfor special taping||||||
||G6<br>G10<br>G11<br>G10A<br>G11A|III<br>II<br>II<br>Ammo pack<br>Ammopack|18<br>16<br>18<br>16<br>18|�<br>18<br>�<br>18<br>�|12.7<br>15.0<br>15.0<br>15.0<br>15.0|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 14 of 23 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **2.5 Reel dimension** 

**==> picture [114 x 102] intentionally omitted <==**

**==> picture [102 x 96] intentionally omitted <==**

## **Dimensions** (in mm) 

|**Dimensions**(in|mm)||||
|---|---|---|---|---|
|Reel type|d|f|n|w|
|I<br>II<br>III|360 max.<br>360 max.<br>500 max.|31±1<br>31±1<br>23±1|approx. 45<br>approx. 55<br>approx. 59|54 max.<br>64 max.<br>72 max.|



If reel type III is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3). 

## **2.6 Ammo pack dimensions** 

**==> picture [91 x 86] intentionally omitted <==**

**==> picture [113 x 57] intentionally omitted <==**

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 15 of 23 

**Leaded varistors** 

**B722*** 

**==> picture [44 x 41] intentionally omitted <==**

**AdvanceD-MP, S14 series** 

## **3 Lead configuration** 

Straight leads are standard for disk varistors. Other lead configurations as crimp style or customer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads (non-standard) are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below. 

The crimp styles of the individual types can be seen from the type designation in the ordering tables. 

## **3.1 Crimp style mode** 

Example: B72210S0271K **5** 01 | 

Digit 13 

|13 of orderingcode|Crimpstyle|Figure|
|---|---|---|
||Standard, straight leads|1|
||S2|2|
||S3|3|
||S4|4|
||S5|5|
|lable upon request|||
|nal coding|�|6|



## **3.2 Standard leads and non-standard crimp styles** 

**Standard, straight leads** 

**Non-standard, Non-standard, crimp style S2 crimp style S3** 

**==> picture [55 x 35] intentionally omitted <==**

**Figure 1** 

**Figure 2** 

**Figure 3** 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 16 of 23 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **Non-standard, crimp style S4** 

## **Non-standard, crimp style S5** 

**==> picture [45 x 32] intentionally omitted <==**

**Figure 4** 

**Figure 5** 

## **3.3 Component height (hmax) for crimped versions (non-standard)** 

Due to technical reasons the component height (hmax) increases if a crimp is added. The maximum height of the crimped component can be found in the table below. 

|Nominal diameter<br>mm|VRMS<br>V|Crimp style|mm|hmax<br>mm|
|---|---|---|---|---|
|5<br>5<br>7<br>7<br>10<br>10<br>10<br>10<br>10<br>10<br>10<br>14<br>14<br>14<br>14<br>14<br>20<br>20|11 ... 175<br>210 ... 460<br>11 ... 175<br>210 ... 460<br>11 ... 300<br>320 ... 460<br>510<br>Automotive<br>Automotive (D1 types)<br>11 ... 175<br>210 ... 460<br>11 ... 300<br>320 ... 460<br>510<br>Automotive<br>Automotive (D1 types)<br>11 ... 320<br>385 ... 510|S2<br>S3<br>S2<br>S3<br>S5<br>S3/S5<br>S3/S5<br>S5<br>S5<br>S4<br>S3<br>S5<br>S3/S5<br>S3/S5<br>S5<br>S5<br>S5<br>S5|5.0<br>5.0<br>5.0<br>5.0<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>5.0<br>5.0<br>7.5<br>7.5<br>7.5<br>7.5<br>7.5<br>10.0<br>10.0|10.0<br>10.0<br>12.0<br>12.0<br>15.5<br>16.5<br>17.5<br>17.0<br>16.0<br>16.5<br>16.5<br>20.0<br>20.0<br>21.5<br>21.0<br>20.0<br>27.0<br>27.5|



Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 17 of 23 

**Leaded varistors AdvanceD-MP, S14 series** 

**B722*** 

**==> picture [44 x 41] intentionally omitted <==**

## **3.4 Trimmed leads (non-standard)** 

Varistors with cut leads available upon request. 

Lead length tolerances: Straight leads +/�1.0 mm Crimped leads +/�0.8 mm Minimum lead length 3.5 mm 

**==> picture [144 x 68] intentionally omitted <==**

**Figure 6** 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 18 of 23 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **Cautions and warnings** 

## **General** 

1. EPCOS metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. 

2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions. 

3. For applications of SIOVs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. 

## **Storage** 

1. Store SIOVs only in original packaging. Do not open the package prior to processing. 

2. Storage conditions in original packaging: Storage temperature: �25 ° C ... +45 ° C, Relative humidity: <75% annual average, <95% on maximum 30 days a year. 

Dew precipitation: is to be avoided. 

3. Avoid contamination of an SIOV's during storage, handling and processing. 

4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term operation (examples given under operation precautions). 

5. The SIOV type series should be soldered within the time specified: SIOV-S, -Q, -LS, -B, -SFS 24 months ETFV and T series 12 months. 

## **Handling** 

1. SIOVs must not be dropped. 

2. Components must not be touched with bare hands. Gloves are recommended. 

3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp edge of SIOV electrodes. 

## **Soldering (where applicable)** 

1. Use rosin-type flux or non-activated flux. 

2. Insufficient preheating may cause ceramic cracks. 

3. Rapid cooling by dipping in solvent is not recommended. 

4. Complete removal of flux is recommended. 

5. Temperatures of all preheat stages and the solder bath must be strictly controlled especially for T series (T14 and T20). 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 19 of 23 

**==> picture [44 x 41] intentionally omitted <==**

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **Mounting** 

1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic that will degrade the component’s electrical characteristics. 

2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components. 

## **Operation** 

1. Use SIOVs only within the specified temperature operating range. 

2. Use SIOVs only within the specified voltage and current ranges. 

3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with any liquids and solvents should be prevented. 

## **Display of ordering codes for EPCOS products** 

The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. **The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products** . Detailed information can be found on the Internet under www.epcos.com/orderingcodes 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 20 of 23 

|**Leaded varistors**|**B722***|
|---|---|
|**AdvanceD-MP, S14 series**||



## **Symbols and terms** 

|**Symbols and**|**terms**|
|---|---|
|Symbol|Term|
|C<br>Ctyp<br>i<br>ic<br>Ileak<br>imax<br>Imax<br>In<br>LCT<br>Ltyp<br>Pmax<br>Rins<br>Rmin<br>TA<br>tr<br>UCT<br>v<br>Vclamp<br>vc, max<br>VDC<br>Vjump<br>vmax<br>Vop<br>VRMS<br>VRMS, op, max<br>Vsurge<br>VV<br>∆VV<br>WLD<br>Wmax|Capacitance<br>Typical capacitance<br>Current<br>Current at which Vc, maxis measured<br>Leakage current<br>Maximum surge current (also termed peak current)<br>Maximum discharge current<br>Nominal discharge current<br>Lower category temperature<br>Typical inductance<br>Maximum average power dissipation<br>Insulation resistance<br>Minimum resistance<br>Ambient temperature<br>Duration of equivalent rectangular wave<br>Upper category temperature<br>Voltage<br>Clamping voltage<br>Maximum clamping voltage at specified current ic<br>DC operating voltage<br>Maximum jump start voltage<br>Maximum voltage<br>Operating voltage<br>AC operating voltage, root-mean-square value<br>Root-mean-square value of max. DC operating voltage incl. ripple current<br>Super imposed surge voltage<br>Varistor voltage<br>Tolerance of varistor voltage<br>Maximum load dump<br>Maximum energy absorption<br>Lead spacing|



All dimensions are given in mm. 

The commas used in numerical values denote decimal points. 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 21 of 23 

## **Important notes** 

The following applies to all products named in this publication: 

1. Some parts of this publication contain **statements about the suitability of our products for certain areas of application** . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out **that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application** . As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 

2. We also point out that **in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified** . In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 

3. **The warnings, cautions and product-specific notes must be observed.** 

4. In order to satisfy certain technical requirements, **some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous)** . Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 

5. We constantly strive to improve our products. Consequently, **the products described in this publication may change from time to time** . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also **reserve the right to discontinue production and delivery of products** . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

6. Unless otherwise agreed in individual contracts, **all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI)** . 

Page 22 of 23 

## **Important notes** 

7. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are **trademarks registered or pending** in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 

Page 23 of 23