B39321R1921A310
Resonator, SAW, 315 MHz, ± 25kHz, 50 ohm
- Manufacturer: TDK
- Product type: Resonators
- Frequency:315MHz; Oscillator Mounting:SMD; No. of Pins:6 Pin; Resonant Impedance:50ohm; Frequency Tolerance:± 25kHz; Product Range:-; Frequency Stability:-; Operating Temperature Min:-
- Frequency: 315MHz
- No. of Pins: 6Pins
- Product Range: -
- Resonant Frequency: 315MHz
- Resonant Impedance: 50ohm
- Frequency Stability: -
- Frequency Tolerance: ± 25kHz
- Oscillator Mounting: SMD
- Operating Temperature Max: 125°C
- Operating Temperature Min: -45°C
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 1.19 € |
| Current stock | 10+ |
| Lead time | 30 days |
## **SAW Components** SAW resonator Short range devices **Series/type: R1921 Ordering code: B39321R1921A310** Date: May 19, 2011 Version: 2.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. **==> picture [443 x 43] intentionally omitted <==** **----- Start of picture text -----**<br> ||| |---|---| |SAW Components|R1921| |SAW resonator|315.00 MHz| |Data sheet| **----- End of picture text -----**<br> ## **Application** - I 1-port resonator - I Provides reliable, fundamental mode, quartz frequency stabilization i.e. in transmitters or local oscillators ## **Features** **==> picture [404 x 172] intentionally omitted <==** **----- Start of picture text -----**<br> |||||||||||| |---|---|---|---|---|---|---|---|---|---|---| |I|Package size 3.0 x 3.0 x 1.0 mm|[3]|1|2|0,63| |I|Package code DCC6G| |I|RoHS compatible|bottom view| |I|Approximate weight 0.037 g| |I|Package for|S|urface|M|ount|T|echnology|6|5|4| |(|SMT|)|1,8| |I|Ni, gold-plated terminals| |side view| |I|Lead free soldering compatible with J - STD20C|fnol||| |I|Passivation layer Elpas| |3,0| |I|AEC-Q200 qualified component family| |I|E|lectrostactic|S|ensitive|D|evice (|ESD|)| |top view| |C|T| **----- End of picture text -----**<br> ## **Pin configuration** **==> picture [213 x 37] intentionally omitted <==** **----- Start of picture text -----**<br> |||| |---|---|---| |I|2|Input| |I|5|Output, grounded in 1-port conf.| |I|1,3,4,6|Ground (case)| **----- End of picture text -----**<br> **==> picture [143 x 132] intentionally omitted <==** **----- Start of picture text -----**<br> C1<br>R1 L1<br>C0<br>2 5<br>**----- End of picture text -----**<br> **2** _ Please read cautions and warnings and important notes at the end of this document. **2** May 19, 2011 ~~LT~~ **SAW Components R1921 SAW resonator 315.00 MHz Data sheet** =m **Characteristics** ||**min.**<br>an|**typ.**<br>an|**max.**<br>an|| |---|---|---|---|---| |**Center frequency1)**<br>fC<br>**Minimum insertion attenuation**<br>αmin<br>Unloaded quality factor<br>QU|314.975<br>—<br>7000<br>an|315.000<br>1.5<br>9800<br>an|315.025<br>2.0<br>—<br>an|MHz<br>dB| |**Ageing of fC**|—|—|–50/+50|ppm| |**Equivalent circuit elements**<br>Motional capacitance<br>C1<br>Motional inductance<br>L1<br>Motional resistance<br>R1<br>Parallel capacitance2)<br>C0<br>||—<br>—<br>—<br>—<br>|<br>||2.455<br>104.0<br>21<br>3.6|—<br>—<br>30<br>—|fF<br>µH<br>Ω<br>pF| |**Temperature coefficient of frequency3)**<br>TCf<br>**Turnover temperature**<br>T0<br>||—<br>10<br>|<br>||–0.032<br>—|—<br>30|ppm/K2<br>˚C| - 1) Center frequency is defined as maximum of the real part of the admittance. > 2) If used in two port configuration (pin 2 - input, pin 5 - output) C0 is reduced by approx. 0.3 pF. > 3) Temperature dependence of fC: fC(TA) = fC(T0) (1 + TCf (TA – T0)2) ## **Maximum ratings** |Operable temperature range|T|–45/+125|˚C| |---|---|---|---| |Storage temperature range|Tstg|–45/+125|˚C| |DC voltage|VDC|12|V| |Source power|PS|0|dBm| Please read cautions and warnings and important notes at the end of this document. May 19, 2011 **3** ~~LT~~ **SAW Components R1921 SAW resonator 315.00 MHz Data sheet** ## **References** |**Type**|R1921| |---|---| |**Ordering code**|B39321R1921A310| |**Marking and package**|C61157-A7-A172| |**Packaging**|F61074-V8228-Z000| |**Date codes**|L_1126| |**Soldering profile**|S_6001| |**RoHS compatible**|defined as compatible with the following documents:<br>"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT<br>AND OF THE COUNCIL of 27 January 2003 on the restriction<br>of the use of certain hazardous substances in electrical and<br>electronic equipment. 2005/618/EC from April 18th, 2005,<br>amending Directive 2002/95/EC of the European Parliament<br>and of the Council for the purposes of establishing the maxi-<br>mum concentration values for certain hazardous substances in<br>electrical and electronic equipment."| |**Coils**|See Inductor pdf-catalog<br>http://<br>www<br>.tdk.co.jp/tefe02/coil.htm#aname1<br>and Data Library for circuit simulation<br>http://www.tdk.co.jp/etvcl/index.htm| **For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com .** ## **Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY** EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. **4** _ Please read cautions and warnings and important notes at the end of this document. May 19, 2011 ## ~~LT~~ **Important notes** The following applies to all products named in this publication: 1. Some parts of this publication contain **statements about the suitability of our products for certain areas of application** . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out **that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application.** As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that **in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.** In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. 4. In order to satisfy certain technical requirements, **some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous)** . Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, **the products described in this publication may change from time to time** . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also **reserve the right to discontinue production and delivery of products** . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, **all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI)** . 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are **trademarks registered or pending** in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. **5** _ **5** May 19, 2011
Updated at June 9, 2026
TDK Corporation is a globally recognized leader in electronic components and magnetic materials. Founded in 1935 to commercialize ferrites, the Tokyo-based company has evolved into a comprehensive manufacturer of high-performance passive components, sensors, and power electronics. TDK’s advanced materials technology serves as the foundation for its extensive portfolio, driving innovation across automotive, industrial, consumer electronics, and communication technologies. Our selection of TDK components heavily features their industry-leading passive components, with a primary focus on magnetics. TDK excels in manufacturing reliable inductive solutions, offering a vast array of power inductors and RF inductors optimized for demanding power management and high-frequency applications. Furthermore, their expertise in electromagnetic compatibility is showcased through a comprehensive range of EMC and RFI suppression products. This includes common mode chokes, power line filters, and specialized shielding materials designed to ensure superior signal integrity in complex designs. Beyond inductors and filtering components, TDK provides robust circuit protection and sensing solutions essential for modern engineering. The portfolio includes precision temperature sensing and compensation NTC thermistors, alongside TVS varistors and inrush current limiting components that safeguard sensitive electronics. Complemented by fixed value inductors, supercapacitors, and charging coils, TDK's versatile product offering delivers the reliability and performance required for sophisticated circuit design.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →