B33331V7805J080

## **Film Capacitors - AC Capacitors** 

## General Purpose MKP AC Capacitors 

**Series/Type: CBB65A-1 Ordering code: B33331V series** Date: 2019-04-10 Version: 2 

>  TDK Electronics AG 2019. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. 

~~eae~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

## **Construction** 

- Metallized polypropylene film 

- Filling material: soft polyurethane resin 

- Aluminum can and top 

## **Features** 

- Overpressure disconnection safety device 

- UL approved for diameter > 40 mm 

- Humidity protected: 85 °C, 85 % rel. humidity (RH) at 460 V for 1000 h 

- Low dissipation factor 

- Self-healing technology 

- Indoor mounting 

- CE compatible 

## **Typical applications** 

- For general AC filtering application 

## **Terminals** 

- 2+2 fast-on terminal 6.3 x 0.8mm #250 style, others on request 

## **Mounting parts (optional)** 

- Threaded stud at bottom of can 

   - (M8, max torque = 5 Nm for 50 mm diameter) 

**==> picture [364 x 236] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Technical data and specifications|
|IEC 61071,|
|Reference|standards|
|UL 810|
|Rated voltage VR|650 V|
|Rated AC RMS voltage VRMS|460 V|
|Rated capacitance|CR|See table|
|Tolerance|± 5%|
|Dielectric Dissipation factor tan δ0 at +20 °C|≤ 2 • 10|[-4 ]|at 1 kHz|
|Life test|IEC 61071|
|Life expectancy|100 000 h for VRMS|│ΔC/C│ ≤3%|
|Maximum ratings|
|Maximum permissible voltage|Vmax|1.10  VR: 8 h/day|
|1.15  VR: 30 min/day|
|1.20  VR: 5 min/day|
|1.30  VR: 1 min/day|
|Maximum permissible current Imax|See table|

**----- End of picture text -----**<br>


CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 2 of 12 

~~EE~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

|**Test data**||
|---|---|
|AC test voltage terminal to terminal VTT|975 V, 2 s|
|AC test voltage terminal to caseVTC|2200 V, 2 s|
|Dissipation factor tanat + 20 °C|≤ 10 • 10-4at 120 Hz|
|**Climatic data**||
|Climaticcategory|40/085/21 to IEC60068-1|
|Lower category θmin|-40°C|
|Upper category θmax|+85°C|
|Maximum hot spot temperature θHS|+85º C|
|Damp heat testttest|21days|
|**Enforced humidity protection**||
|Temperature|+85 °C|
|Relative humidity|85 %|
|Duration|1000 h|
|Applied voltage|URMS|
|Criteria|Capacitance deviation ΔC at +20 °C < ±10%|
||Dissipation factor variation Δ tan at +20°C< +0.005|



**Mechanical and thermal properties of terminal insulator material** Terminal material: UL 94 V0 compatible Self-extinguishing within 2 seconds of withdrawing glow wire without igniting wrapping tissue of GWT ~~ee~~ **Compatibility to RoHS** ~~ee~~ Compliance to directive 2011/65/EU **Approvals** Approved component 10000 AFC. **US UL File E 238746** See table for approved ratings Compliance to LV directive 2014/35/EU ~~a~~ CE 

CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 3 of 12 

**Film Capacitors - AC Capacitors General Purpose MKP AC Capacitors** 

**B33331V series CBB65A-1** 

## **Dimensional drawings and marking** 

Note: Check the table before marking UL. 

UL to be marked only for rating between 25 µF to 50 µF. 

Don’t mark UL for rating between 2 µF to 20 µF. In the blank space, the marking can be shifted left. 

## **Drawing 1** 

## **Drawing 2** 

**==> picture [120 x 319] intentionally omitted <==**

**----- Start of picture text -----**<br>
a<br>L e ØD±1<br>j :<br>L±3 H±2<br>Marking<br>ØD1±1<br>**----- End of picture text -----**<br>


**==> picture [113 x 316] intentionally omitted <==**

**----- Start of picture text -----**<br>
! !<br>ØD±1<br>L<br>i<br>L±3 H±2<br>Marking<br>ØD1±1<br>**----- End of picture text -----**<br>


CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 4 of 12 

~~[~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

## **Marking specification** 

**With UL** CR  uF                                                  WW.YYN +/-5%               VRMS                                  N   460V~                U   650V~ _- Zz No PCB's    CBB65A-1    IEC 61071    50/60Hz ~~EPCOS~~ B33331V     40/85/21     Protected      E238746 Overpressure disconnector    SH   10 K Discharge before handling Made by EPCOS                      P.O. No. 

**Without UL** CR  uF                              WW.YYN ys +/-5%      VRMS                                N   460V~     U   650V~ | rs= No PCB's   CBB65A-1   IEC 61071 ~~EPCOS~~ B33331V     40/85/21      Protected Overpressure disconnector   50/60Hz Discharge before handling             SH Made by EPCOS                   P.O. No. 

## **Expected lifetime** 

## **Lifetime vs voltage (@HS temperature)** 

**==> picture [292 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
vavo00 (=I ALIN LIN EIN EE<br>voc Se ES NSIS NSIS<br>100000<br>oo LESS<br>coo LEN ESN ESN ES<br>oo BESS SS SSS SSS<br>70000<br>oLtlL il ti) re<br>0.8 0.9 1.0<br>Voltage (V/VRMS)<br>Lifetime (hours)<br>**----- End of picture text -----**<br>


CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 5 of 12 

~~LT~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

## **Expected fit rate** 

## **Failure rate**  **vs voltage (@HS temperature)** 

**Voltage (V/VRMS)** 

## **Ordering codes and packing unit** 

|VR<br>VRMS<br>V|CR<br>µF<br>~~|~~|Imax1)<br>A<br>~~|~~|î<br>A<br>~~|~~|ESR2)<br>mΩ<br>~~|}~~|Case<br>(D × H)<br>mm<br>~~|}~~|D1<br>mm<br>~~|}~~<br>~~|~~|L<br>mm<br>~~Pt~~|Drawing<br>~~Pt~~|Ordering code<br>~~Pt~~|Packing<br>unit<br>~~Pt~~|Approval|
|---|---|---|---|---|---|---|---|---|---|---|---|
|650<br>VR<br>460<br>VRMS<br>~~OR~~|2<br>~~|~~|6<br>~~|~~|55<br>~~|~~|35<br>~~|}~~|30 x 55<br>~~|}~~|33<br>~~|}~~<br>~~|~~|73<br>~~Pt~~|2<br>~~Pt~~|B33331V7205J0#X<br>~~Pt~~|100<br>~~Pt~~||
||4<br>~~|~~<br>~~|~~<br>~~—~~|7<br>~~|~~<br>|<br>|75<br>~~| ~~<br>||23<br> ~~|}~~<br>||30 x 65<br>~~|}~~<br>||33<br>~~|}~~<br>~~|~~<br>||83<br>~~Pt~~<br>~~ff}~~<br>~~ee~~|2<br>~~Pt~~<br>~~ff}~~<br>~~ee~~|B33331V7405J0#X<br>~~Pt~~<br>~~ff}~~<br>~~ee~~|100<br>~~Pt~~<br>~~ff}~~<br>~~ee~~||
||6<br>~~a~~<br>~~—|~~<br>~~—~~|8<br>~~ee~~<br>~~|~~<br>|<br>|100<br>~~ee~~<br>||21<br>~~ee~~<br>~~ff}~~|30 x 65<br>~~ee~~<br>~~ff}~~|33<br>~~ee~~<br>~~ff}ft~~|83<br>~~ee~~<br>~~ee~~<br>~~ft~~|2<br>~~ee~~<br>~~ee~~|B33331V7605J0#X<br>~~ee~~<br>~~ee~~|100<br>~~ee~~<br>~~ee~~||
||8<br>~~—~~ ~~|~~<br>~~—|~~<br>~~—~~|9<br>~~|~~<br>|<br>~~|~~<br>|<br>|140<br>|<br>||17<br>~~ff}~~<br>~~fo}~~|30 x 65<br>~~ff}~~<br>~~fo}~~|33<br>~~ff}ft~~<br>~~fo}ft~~|83<br>~~ee~~<br>~~ft~~<br>~~ft~~|2<br>~~ee~~|B33331V7805J0#X<br>~~ee~~|100<br>~~ee~~||
||10<br> ~~|~~<br>~~—~~ ~~|~~<br>~~—|~~<br>~~OR~~|10<br>~~|~~<br>|<br>~~|~~<br>|<br>~~|~~<br>~~|~~<br>|130<br>| <br>|<br>|<br>|19<br> ~~ff}~~<br>~~fo}~~<br>~~fo}~~<br>|30 x 75<br>~~ff}~~<br>~~fo}~~<br>~~fo}~~<br>|33<br>~~ff} ft~~<br>~~fo}ft~~<br>~~fo}ft~~<br>|93<br>~~ft~~<br>~~ft~~<br>~~ft~~<br>|2<br>|B33331V7106J0#X<br>|100<br>||
||12<br> ~~|~~<br>~~—~~ ~~|~~<br>~~OR~~|12<br>~~|~~<br>|<br>~~|~~<br>~~|~~<br>|210<br>| <br>|<br>|13<br> ~~fo}~~<br>~~fo}~~<br>|40.5 x 65<br>~~fo}~~<br>~~fo}~~<br>|43.5<br>~~fo} ft~~<br>~~fo}ft~~<br>|78<br>~~ft~~<br>~~ft~~<br>|1<br>|B33331V7126J0#X<br>|49<br>||
||14<br> ~~|~~<br>~~OR~~|12<br>~~|~~<br>~~|~~<br>|200<br>|<br>|11<br>~~fo}~~<br>|40.5 x 65<br>~~fo}~~<br>|43.5<br>~~fo}ft~~<br>|78<br>~~ft~~<br>|1<br>|B33331V7146J0#X<br>|49<br>||
||16<br> ~~|~~<br>~~ORa~~|12<br>~~|~~<br>~~|~~<br>~~ee~~|210<br>| <br>~~ee~~|12<br> ~~fo}~~<br>~~ee~~|40.5 x 75<br>~~fo}~~<br>~~ee~~|43.5<br>~~fo} ft~~<br>~~ee~~|88<br>~~ft~~<br>~~ee~~|1<br>~~ee~~|B33331V7166J0#X<br>~~ee~~|49<br>~~ee~~||
||20<br>~~a~~|15<br>~~ee~~|260<br>~~ee~~|11<br>~~ee~~|40.5 x 85<br>~~ee~~|43.5<br>~~ee~~|98<br>~~ee~~|1<br>~~ee~~|B33331V7206J0#X<br>~~ee~~|49<br>~~ee~~||
||25<br>~~a ~~<br>~~a~~|16<br> ~~a~~<br>|260<br>~~ee~~<br>|12<br>~~ee~~<br>|45 x 85<br>~~ee~~<br>|48<br>~~ee~~<br>|98<br>~~ee~~<br>|1<br>~~ee~~<br>|B33331V7256J0#X<br>~~ee~~<br>~~ee~~<br>|49<br>~~ee~~<br>~~ee~~<br>|UL<br>~~ee~~|
||30<br>~~a ~~<br>~~a~~<br>~~a~~|16<br> ~~a ~~<br><br>|340<br> ~~ee~~<br>|10<br>~~ee~~<br>|50 x 85<br>~~ee~~<br>|53<br>~~ee~~<br>|98<br>~~ee~~<br>|1<br>~~ee~~<br>|B33331V7306J0#X<br>~~ee~~<br>~~ee~~<br><br>~~ee~~|36<br>~~ee~~<br>~~ee~~<br><br>~~ee~~|UL<br>~~ee~~<br>~~ee~~|
||40<br>~~a ~~<br>~~a~~|16<br> ~~a ~~<br>~~a~~|350<br> ~~ee~~<br>~~ee~~|11<br>~~ee~~<br>~~ee~~|50 x 100<br>~~ee~~<br>~~ee~~|53<br>~~ee~~<br>~~ee~~|113<br>~~ee~~<br>~~ee~~|1<br>~~ee~~<br>~~ee ee~~|B33331V7406J0#X<br>~~ee ~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|36<br> ~~ee~~<br>~~ee~~<br>~~ee~~<br>~~ee~~|UL<br>~~ee~~<br>~~ee~~<br>~~ee~~|
||50<br>~~a~~|16<br> ~~a~~|410<br>~~ee~~|14<br>~~ee~~|50 x 100<br>~~ee~~|53<br>~~ee~~|113<br>~~ee~~|1<br>~~ee ee~~|B33331V7506J0#X<br>~~ee ~~<br>~~ee~~|36<br> ~~ee~~<br>~~ee~~|UL<br>~~ee~~<br>~~ee~~|



2)  ESR – Equivalent Series resistance  at 1KHz 

CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 6 of 12 

**Film Capacitors - AC Capacitors General Purpose MKP AC Capacitors** 

**B33331V series** 

**CBB65A-1** 

## **Composition of ordering code** 

## #: construction 

6 Aluminium can flat type 

8 Aluminium can with M8 bolt 

X: 

0 as per this dimension and properties 1-9 special dimension and properties 

## **Packing box** 

CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 7 of 12 

## ~~SS~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

## **Rated AC voltage VR** 

Maximum operating peak voltage of either polarity of reversing type waveform for which the capacitor is designed 

## **Rated AC RMS voltage VRMS** 

Root mean square of the maximum permissible value of sinusoidal AC voltage in continuous operation 

## **Rated capacitance CR** 

Designed capacitance of the capacitor at 20 °C at 1 kHz 

## **Maximum continuous current Imax** 

Maximum RMS current for continuous operation, including harmonics 

CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 8 of 12 

~~eee~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

## **Maximum peak current Î** 

Maximum current amplitude which occurs instantaneously during continuous operation 

The maximum peak current (Î) and the maximum rate of voltage rise of a capacitor are related as follows: 

𝑑𝑉 T=C. ~~(—)~~ 𝑑𝑇 

## **Maximum surge current Îs** 

Admissible peak current induced by a switching or any other disturbance of the system which is allowed for a limited number of times 

**==> picture [57 x 24] intentionally omitted <==**

Maximum duration: 50 ms / pulse Maximum number of occurrences: 1000 (during load) 

## **Equivalent series resistance ESR** 

Effective resistance which, if connected in series with an ideal capacitor of capacitance value equal to that of the capacitor in question, would have a power loss equal to active power dissipated in that capacitor under specified operating conditions. 

## **Self-inductance Lself** 

Series inductance of the terminals and the winding 

With self-inductance, it is possible to determine the resonance frequency. 

1 . 𝐶 

## **Harmonics** 

Harmonics result from the operation of electrical loads with non-linear voltage-current characteristics. It is necessary to calculate the temperature rise of the capacitors from hotspot to case during the using process. If the temperature rise of theoretical calculation of capacitor’s hotspot exceeds the maximum allowable range, we would propose to check the total harmonic current distortion (THDi) of the input terminals. 

## 𝑇𝐻𝐷 

## **Thermal load** 

After installation of the capacitor, it is necessary to verify that maximum hot-spot temperature is not exceeded at extreme service conditions. 

## **Mechanical protection** 

The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided. 

CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 9 of 12 

~~LT~~ **Film Capacitors - AC Capacitors B33331V series General Purpose MKP AC Capacitors CBB65A-1** 

## **Storage and operating conditions** 

Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In dusty environments, regular maintenance and cleaning especially of the terminals is required to avoid conductive path between phases and/or phases and ground. The maximum storage temperature is 85 °C. 

## **Service life expectancy** 

Electrical components do not have an unlimited service life expectancy; this applies to self-healing capacitors, too. The maximum service life expectancy may vary depending on the application for which the capacitor is used. 

## **Overpressure disconnector** 

To ensure full functionality of an overpressure disconnector, the following must be observed: 

- The elastic elements must not be hindered, i.e. 

   - connecting lines must be flexible leads (cables). 

   - there must be sufficient space for expansion above the connections. 

   - folding seams must not be retained by clamps. 

- Stress parameters of the capacitor must be within the IEC 61071 specification. 

## **Safety** 

- Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or property damage may result from bursting of the capacitor or from expulsion of oil or melted material due to mechanical disruption of the capacitor. 

- Ensure good, effective grounding for capacitor enclosures. 

- Observe appropriate safety precautions during operation (self-recharging phenomena and the high energy contained in capacitors). 

- Handle capacitors carefully, because they may still be charged even after disconnection. 

- The terminals of capacitors, connected bus bars and cables as well as other devices may also be energized. 

- Follow good engineering practice. 

## **Cautions and warnings** 

- In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not be used at all. This applies also in cases of leakage. 

- To ensure the full functionality of the overpressure disconnector, elastic elements must not be hindered and a minimum space of 12 mm has to be kept above each capacitor. 

- Check tightness of the connections/terminals periodically. 

- The energy stored in capacitors may be lethal. To prevent any chance of shock, discharge and short-circuit the capacitor before handling. 

- Failure to follow cautions may result, worst case, in premature failures, bursting and fire. 

- TDK Electronics is not responsible for any kind of possible damages to persons or things due to improper installation and application of capacitors for power electronics. 

## **Display of ordering codes for TDK Electronics products** 

The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. **The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products** . Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes. 

CAP FILM I&A AC 

2019-04-10 

Please read _Cautions and warnings_ and _Important notes_ at the end of this document. 

Page 10 of 12 

~~LT~~ **Important notes** 

The following applies to all products named in this publication: 

1. Some parts of this publication contain **statements about the suitability of our products for certain areas of application** . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out **that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application.** As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 

2. We also point out that **in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified.** In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 

3. **The warnings, cautions and product-specific notes must be observed.** 

4. In order to satisfy certain technical requirements, **some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous)** . Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 

5. We constantly strive to improve our products. Consequently, **the products described in this publication may change from time to time** . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. 

We also **reserve the right to discontinue production and delivery of products** . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 

6. Unless otherwise agreed in individual contracts, **all orders are subject to our General Terms and Conditions of Supply.** 

7. **Our manufacturing sites serving the automotive business apply the IATF 16949 standard.** The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that **only requirements mutually agreed upon can and will be implemented in our Quality Management System.** For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon. 

Page 11 of 12 

## ~~LT~~ **Important notes** 

8. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are **trademarks registered or pending** in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. 

## Release 2018-10 

Page 12 of 12