B-TL70Z-7

TL70 Universal AC Voltage Modular Tower Light 

## Features 

Banner's TL70 Tower Light is a 70 mm, modular LED indicator with extremely bright and uniform light. The modularity gives the user flexibility to customize tower lights as needed and change positions in the field. The TL70 is also available preassembled for easy installation. 

- 100 to 240 V AC operation 

- • Connection options include 1/2-20 quick disconnect and cabled versions • Uses the same light and audible segments as the DC voltage powered TL70 • Light segments have user-selectable solid ON or flashing • Up to six colors, or five colors plus audible, in one device 

- Rugged, water-resistant IP65 housing with UV-stabilized material 

- • Bright, uniform indicator segments appear gray when off to eliminate false indications from ambient light 

## Models 

## TL70 Base - Model Key 

**==> picture [485 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
Housing Power — Connection [(1)] Housing Color<br>B-TL70 Z — Q5<br>5 = 2 m (6.5 ft) unterminated 5-wire PVC-jacketed cable (1-4 modules)<br>Blank = Black<br>Base segment Z = AC 7 = 2 m (6.5 ft) unterminated 7-wire PVC-jacketed cable (5-6 modules)<br>C = Gray<br>Q5 = Integral 5-pin 1/2 in. 20UNF male quick-disconnect connector (1-4 modules)<br>TL70 Segments - Model Key<br>Housing — Color/Alarm Housing Color<br>SG-TL70 — R<br>G = Green<br>Y = Yellow<br>R = Red<br>B = Blue<br>W = White Blank = Black<br>TL70 Segment<br>O = Orange C = Gray<br>A = Standard Audible<br>AL = Loud Audible<br>ALM = Loud Multi-Tone Audible<br>AP = Programmable Audible<br>**----- End of picture text -----**<br>


Select the 5-pin/wire base for tower light configurations of up to 4 modules. Select the 7-wire base for tower light configurations of up to 6 modules. 

- Example base model number: B-TL70Z-Q5 

- Example light segment model number: SG-TL70-G 

- • Example audible segment model number: SG-TL70-A 

## TL70 Pre-Assembled Models - Model Key 

**==> picture [464 x 46] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color/Position<br>Housing Audible Alarm [(2)] Housing Color Connection [(1)]<br>1 2 3 4 5 6<br>TL70Z W B G Y R Q<br>Continued on page 2<br>**----- End of picture text -----**<br>


(1) Quick-disconnect connector models require a mating cordset. 

(2) Not available with six module lights. 

Original Instructions 28-Aug-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 191349 Rev. E 

TL70 Universal AC Voltage Modular Tower Light 

**==> picture [487 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 1<br>Color/Position<br>Housing Audible Alarm Housing Color Connection [(1)]<br>1 2 3 4 5 6<br>Blank = None<br>G = Green<br>Y = Yellow Blank = None Blank = 2 m (6.5 ft) integral<br>A = Standard Audible Blank = Black PVC-jacketed cable<br>R = Red<br>AL = Loud Audible C = Gray Q = Integral 5-pin 1/2 in.<br>B = Blue 20UNF male quick-disconnect<br>AP = Programmable Audible connector [(3)]<br>W = White<br>O = Orange<br>• Example pre-assembled model number: TL70ZGYRAQ.<br>**----- End of picture text -----**<br>


Use a 5-pin cordset for 1 to 4 modules. 

## WARNING: 

- Risk of hearing loss 

- All effective warning horns produce loud sounds that could cause, in certain situations, permanent hearing loss. 

- Install the device far enough away from potential listeners to limit their exposure while still maintaining its effectiveness. Reference OSHA Code of Federal Regulations 1910.95 Noise Standard for guidelines about permissible noise exposure levels. 

For more information regarding other TL70 Audible models, refer to the following documents: 

- TL70 Loud Multi-Tone Audible Tower Light Module datasheet (p/n 195189) 

- TL70 Programmable Audible Tower Light Module datasheet (p/n 196627) 

## Configuring the Modules 

eftellele 1 2 3 4 5 6 lectern 7 8 9 10 

Turn on the appropriate DIP switch to set the order of the components, counting up from the tower light's base. 

> (3) Limited to four module lights. 

page 2 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

28-Aug-25 

TL70 Universal AC Voltage Modular Tower Light 

**==> picture [500 x 413] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIP Switches<br>Module 6 Assembly Options<br>1 2 3 4 5 6 7 8<br>Module 1 ON<br>Module 5<br>Module 2 ON<br>Module 3 ON<br>Module 4 Light and Standard<br>Audible Components Module 4 ON<br>Module 3 Module 5 ON<br>Module 6 ON<br>Module 2<br>3 Hz ON OF<br>Light and Module  1.5 Hz ON ON<br>Flash Rate<br>Module 1<br>Solid On* OFF OFF<br>Pulse 1.5 Hz ON OFF<br>Base<br>Standard Audible  Chirp Alarm ON ON<br>Module Settings Siren Alarm OFF ON<br>Continuous Alarm* OFF OFF<br>DIP Switches<br>Assembly Options<br>1 2 3 4 5 6 7 8 9 10<br>Pulse 1.5 Hz ON OFF<br>Chirp Alarm ON ON<br>Siren Alarm OFF ON<br>Continuous Alarm* OFF OFF<br>Loud Audible Module<br>Settings Low Intensity* OFF OFF<br>Med. Intensity ON OFF<br>Med./Loud Intensity OFF ON<br>Loud Intensity ON ON<br>**----- End of picture text -----**<br>


* Factory default setting 

## Assembling the Modules 

**==> picture [135 x 185] intentionally omitted <==**

**==> picture [134 x 168] intentionally omitted <==**

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 8 

28-Aug-25 

TL70 Universal AC Voltage Modular Tower Light 

## To assemble the modules: 

1. Align the notches on each module and press together. 

2. Rotate the top module clockwise to lock into place (notches shown in the locked position). 

NOTE: DIP switches should remain in the default off position. 

## Wiring 

**==> picture [500 x 164] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Wire 1 = Brown 7-Wire<br>Module wh (3) Neutral 2 = Blue3 = White Module wh (3) Neutral<br>4 = Black 100–240 V AC<br>100–240 V AC bn (1)<br>bn (1) 5 = Gray M1 Hot<br>M1 Hot 6 = Red<br>7 = Yellow bu (2)<br>M2 bu (2) M1 = Module 1 M2<br>M2 = Module 2 bk (4)<br>bk (4) M3 = Module 3 M3<br>M3 M4 = Module 4 gy (5)<br>M5 = Module 5 M4<br>M4 gy (5) M6 = Module 6 M5 rd (6)<br>ye (7)<br>M6<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Voltage and Current 

100 V AC to 240 V AC; 50 Hz to 60 Hz 

Maximum current per color or audible module: 70 mA at 120 V AC and 60 Hz 50 mA at 230 V AC and 50 Hz 

## Supply Protection Circuitry 

## Protected against transient voltages 

## Leakage Current Immunity 

500 µA 

Application Note: The use of relay output PLC is recommended since there is no leakage current. Solid state output PLCs often have leakage current above 1 mA and, therefore, turn the light on in the off state. To counteract the leakage current, a shunt resistor must be used. A resistor must be applied from the neutral wire of the device to the hot wire of each channel of the device. 

## Indicators 

1 to 6 colors depending on model: Green, Red, Yellow, Blue, White, and Orange 

Flash rates: 1.5 Hz ±10% and 3 Hz ±10% 

LEDs are independently selected 

## Indicator Response Time 

Off Response: 20 ms (maximum) On Response: 240 ms (maximum) 

## Indicator Characteristics 

**==> picture [222 x 133] intentionally omitted <==**

**----- Start of picture text -----**<br>
Color  Lumen<br>Dominant Wavelength<br>Coordinates [(4)] Output<br>Color  (nm) or Color<br>(Typical at<br>Temperature (CCT)  x  y  25 °C)<br>Green  525 nm  –  –  92<br>Red  625 nm  –  –  40<br>Yellow  590 nm  –  –  22<br>Blue  470 nm  –  –  32<br>White  5000 K  –  –  125<br>Orange  –  0.66  0.33  33<br>**----- End of picture text -----**<br>


## Audible Alarm 

Standard Audible Alarm: 2.6 kHz ± 250 Hz oscillation frequency; maximum intensity (typical) 92 dB at 1 m (3.3 ft) Loud Audible Alarm: 2.6 kHz ± 250 Hz oscillation frequency; maximum intensity (typical) at 1 m (3.3 ft) (see table) 

**==> picture [220 x 88] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIP Switches<br>Max Intensity (Loud Audible)<br>9 10<br>ON ON Intensity 4: 101 dB<br>OFF ON Intensity 3: 99 dB<br>ON OFF Intensity 2: 92 dB<br>OFF OFF Intensity 1: 85 dB<br>**----- End of picture text -----**<br>


(4) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. 

page 4 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

28-Aug-25 

TL70 Universal AC Voltage Modular Tower Light 

## Audible Adjustment 

Standard Audible Alarm: Mechanical adjustment: Rotate the cover until the desired volume is reached 

Loud Audible Alarm: Electronic adjustment: Select the desired volume using DIP switches 9 and 10 

Typical Reduction in Sound Intensity with Audible Adjustment (maximum to minimum): 

- Standard Audible: 8 dB 

- Loud Audible: 16 dB 

## Construction 

Bases, segments, covers: polycarbonate 

Connections 

Integral 5-pin 1/2 in. 20UNF male quick-disconnect connector, 2 m (6.5 ft) unterminated 5-wire PVC-jacketed cable, or 2 m (6.5 ft) unterminated 7-wire PVC-jacketed cable, depending on model 

## Vibration and Mechanical Shock 

Vibration: 10 Hz to 55 Hz, 0.5 mm peak-to-peak amplitude per IEC 60068-2-6 

Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27 

## Operating Conditions 

–40 °C to +50 °C (–40 °F to +122 °F) 

95% at +50 °C maximum relative humidity (non-condensing) 

Environmental Rating 

IP65 

Certifications 

**==> picture [31 x 50] intentionally omitted <==**

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [500 x 194] intentionally omitted <==**

**----- Start of picture text -----**<br>
Image Model Height (H)<br>1 light module 155.6 mm (6.13 in)<br>1 light module, 1 audible module 212.3 mm (8.36 in)<br>2 light modules 205.3 mm (8.08 in)<br>2 light modules, 1 audible module 262 mm (10.31 in)<br>3 light modules 255 mm (10.04 in)<br>3 light modules, 1 audible module 311.7 mm (12.27 in)<br>4 light modules 304.7 mm (12 in)<br>4 light modules, 1 audible module 361.4 mm (14.23 in)<br>5 light modules 354.4 mm (13.95 in)<br>5 light modules, 1 audible module 411.1 mm (16.19 in)<br>Internal Threads<br>Max Torque 2.25 Nm1/2–14 NPSM 6 light modules 404.1 mm (15.91 in)<br>[20in–lbf]<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change. 

**==> picture [500 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Single-Ended 1/2-in Dual Key Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQAC2-506 2 m (6.56 ft)  42 Typ. 3 4<br>MQAC2-515 5 m (16.4 ft)<br>2<br>Straight  1 5<br>1/2-20 UNF-2B 1 = Brown<br>MQAC2-530 9.14 m (30 ft)  2 = Blue<br>ø 14.5 3 = White<br>4 = Black<br>5 = Gray<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 8 

28-Aug-25 

TL70 Universal AC Voltage Modular Tower Light 

## Mounting Brackets 

All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change. 

- 45 

- SMB30A • Right-angle bracket with curved slot for versatile orientation •• Clearance for M6 (¼ in) hardwareMounting hole for 30 mm sensor 61 C • 12-gauge stainless steel B A 

- Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 69 70 57 

- SMB30MM • 12-gauge stainless steel bracket with curved mounting slots for versatile orientation • Clearance for M6 (¼ in) hardware C • Mounting hole for 30 mm sensor 57 B 

- Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 × 7, B = ø 6.4, C = ø 30.1 A 45 

- SMBAMS30P • Flat SMBAMS series bracket C • 30 mm hole for mounting sensors • Articulation slots for 90°+ rotation A • 12-gauge 300 series stainless steel 93 B 

- Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 85 60 

- SSA-MBK-EEC1 45 • Single 30 mm hole • 8 gauge steel, black finish (powder coat) • Front surface for customer-applied labels 80 B 

- Hole size: A = ø 7 , B = ø 30 A 

- 55 

- LMBE12RA35 35 38.25 • Direct mounting of stand-off pipe, with common bracket type • Zinc-plated steel • 1/2-14 NPSM nut • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm 57 

- Hole center spacing: 20.0 2X Ø9 65 45 

- LMBE12RA45 38.25 • Direct mounting of stand-off pipe, with common bracket type • Zinc-plated steel • 1/2-14 NPSM nut • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm 81 

- Hole center spacing: 35.0 2X Ø11 

page 6 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

28-Aug-25 

TL70 Universal AC Voltage Modular Tower Light 

## Elevated Mount System 

**==> picture [500 x 484] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Description Components<br>SA-M30  - Black Polycarbonate • Streamlined black PC or Gray PC thread cover<br>• Covers the outer M30 threads on the light's base<br>SA-M30C  - Gray Polycarbonate • Mounting hardware included<br>Polished 304 Stainless<br>Black Anodized Aluminum Clear Anodized Aluminum<br>Steel<br>SOP-E12-150SS SOP-E12-150A SOP-E12-150AC • Elevated-use stand-off pipe (½ in. NPSM/DN15)<br>• Polished 304 stainless steel, black anodized aluminum,<br>150 mm (6 in) long 150 mm (6 in) long 150 mm (6 in) long or clear anodized aluminum surface<br>• ½ in. NPT thread at both ends: one end screws into the<br>SOP-E12-300SS SOP-E12-300A SOP-E12-300AC internal threads of the light's base, and one end screws<br>into the mounting base adapter/cover<br>300 mm (12 in) long 300 mm (12 in) long 300 mm (12 in) long • Compatible with most industrial environments<br>SOP-E12-900SS SOP-E12-900A SOP-E12-900AC<br>900 mm (36 in) long 900 mm (36 in) long 900 mm (36 in) long<br>SA-E12M30  - Black Acetal • Streamlined black acetal or white UHMW mounting base<br>adapter/cover<br>• Connects between ½ in. NPSM/DN15 pipe and 30 mm<br>SA-E12M30C  - White UHMW (1-3/16 in) drilled hole<br>• Mounting hardware included<br>Pipe Mounting Flange<br>Model Description Construction<br>• Elevated-use stand-off pipes (½ in, NPSM/DN15) Die-cast zinc base with black  1/2-14 NPSM 4x ø5.5 54<br>SA-F12 • M5 mounting hardware and nitrile gasket  paint ø28<br>included 10 ø70<br>• Elevated-use stand-off pipes (½ in, NPSM/DN15) 1/2-14NPSM 2 x 120° ø40<br>SA-F12-3 • M4 mounting hardware and nitrile blend  Black Polycarbonate 29<br>gasket included 8.77<br>ø60<br>Foldable Mounting Brackets<br>Model Description Construction<br>SA-FFB12 Black polycarbonate 1/2-14 NPSM<br>•• For use with 1/2 inch stand-off pipesStainless steel hardware 1 110°<br>SA-FFB12C Gray polycarbonate<br>Ø70 4 x Ø5<br>**----- End of picture text -----**<br>


## LMB Sealed Right-Angle Bracket 

Model Description • Direct-Mount Models LMB30RA - Black polycarbonate • Bracket kit with base, 30 mm adapter, set screw, LMB30RAC - Gray polycarbonate fasteners, O-rings, and gaskets. 

**==> picture [149 x 60] intentionally omitted <==**

Continued on page 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 7 of 8 

28-Aug-25 

TL70 Universal AC Voltage Modular Tower Light 

## Continued from page 7 

Model 

LMBE12RA - Black polycarbonate LMBE12RAC - Gray polycarbonate 

Description 

- Pipe-Mount Models 

- • Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O-rings, and gaskets 

- • For use with stand-off pipe (listed and sold separately) 

**==> picture [149 x 61] intentionally omitted <==**

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 8 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

28-Aug-25