AWCS001207073N9J00

Wirewound Inductor, 3.9 nH, 0.066 ohm, 6 GHz, 840 mA, AWCS Series

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: PULSE ELECTRONICS
Product type: Wirewound Inductors
SVHC: No SVHC (04-Feb-2026)
Inductance: 3.9nH
Core Material: Ceramic
Product Range: AWCS Series
Product Width: 0.7mm
Product Height: 0.66mm
Product Length: 1.19mm
DC Current Rating: 840mA
DC Resistance Max: 0.066ohm
Inductance Tolerance: ± 5%
Inductor Construction: Unshielded
Inductor Case / Package: -
Self Resonant Frequency: 6GHz

Delivery and price
Units per pack	8000
Price	0.041 €
Current stock	1000+
Lead time	30 days

Datasheet

## **RF Inductor** 

## **Automotive Grade AWCS Series** 

## **Overview** 

Wire-wound RF inductors are electronic components designed to store energy in a magnetic field when electrical current passes through them. They are constructed by winding a conductive wire (usually copper or gold-plated) around a core material such as air, ceramic, or ferrite. 

This configuration allows them to provide high inductance values with minimal power loss, especially at high frequencies. 

## **Benefits** 

1. High Q-Factor (Quality Factor) 

2. Wide Frequency Range 

3. Low Signal Loss 

4. High Current Handling 

5. Can maintain excellent thermal stability at different temperatures 

## **Applications** 

1. Automotive Electronics: infotainment systems, ADAS, and car keyless entry systems. 

2. Industrial and Medical Equipmen: RFID systems and medical imaging equipment. 

3. Data Centers and Networking 

4. Consumer Electronics 

## **Product Information** 

|**Series**|**Size Code (JIS/EIA)**|**Inductance (nH)**|
|---|---|---|
|AWCS|1005/0402|1 ~ 4700|
||1608/0603||
||2012/0805||
||2520/1008||
||3025/1210||



AEC-Q200 

## **AWCS00120707 Series Specification** 

**1 Scope:** This specification applies to Wire Wound Ceramic Chip Inductors ~~_|~~ 

**==> picture [122 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 [Part Numbering: ]<br>_|<br>**----- End of picture text -----**<br>


**==> picture [66 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
3 Rating:<br>_|<br>**----- End of picture text -----**<br>


Operating Temperature:     - 55℃ ~ 125℃(Including self - temperature rise) 

(Including self - temperature rise) 

Storage Temperature: - 40 ℃ ~ 125 ℃ 

(The storage temperature range is for after the assembly) 

**==> picture [75 x 19] intentionally omitted <==**

**----- Start of picture text -----**<br>
4 Marking:<br>_|<br>**----- End of picture text -----**<br>


**==> picture [97 x 17] intentionally omitted <==**

**----- Start of picture text -----**<br>
No   Marking<br>**----- End of picture text -----**<br>


**==> picture [182 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
5 [Standard Testing Condition]<br>_|<br>**----- End of picture text -----**<br>


||Unless otherwise specified|Incase ofdoubt|
|---|---|---|
|Temperature|OrdinaryTemperature(15to 35℃)|20 to 30℃|
|Humidity|OrdinaryHumidity(25to 85%RH)|50to 80 %RH|



AEC-Q200 

## **AWCS00120707 Series Specification** 

**6 Configuration and Dimensions and Unit Weight:** 

**7 Electrical Characteristics:** 

|**Part No.**|**Inductance**|**L/Q Test Freq.**|**Q**|**SRF**|**RDC**|**Irms**|**Tolerance**|
|---|---|---|---|---|---|---|---|
||**(nH)**|**(MHz)**|**Min.**|**(MHz)Min.**|**(Ω)Max.**|**(mA)Max.**||
|AWCS001207071N0□00|1|250/250|16|12700|0.045|1360|K,J,B|
|AWCS001207071N2□00|1.2|250/250|10|10400|0.14|640|K,J,B|
|AWCS001207071N3□00|1.3|250/250|10|10400|0.14|640|K,B|
|AWCS001207071N9□00|1.9|250/250|16|11300|0.07|1040|K,J,B|
|AWCS001207072N0□00|2|250/250|16|11100|0.07|1040|K,J,B|
|AWCS001207072N2□00|2.2|250/250|19|10800|0.07|960|K,J,B|
|AWCS001207072N4□00|2.4|250/250|15|10500|0.068|790|K,J,B|
|AWCS001207072N5□00|2.5|250/250|13|10400|0.15|640|K,J,B|
|AWCS001207072N7□00|2.7|250/250|16|10400|0.12|640|K,J,B|
|AWCS001207073N3□00|3.3|250/250|19|7000|0.066|840|K,J,H|
|AWCS001207073N6□00|3.6|250/250|19|6800|0.066|840|K,J,H,G|
|AWCS001207073N9□00|3.9|250/250|19|6000|0.066|840|K,J,H,G|
|AWCS001207074N3□00|4.3|250/250|18|6000|0.091|700|K,J,H|
|AWCS001207074N7□00|4.7|250/250|15|4770|0.13|640|K,J,H|
|AWCS001207075N1□00|5.1|250/250|20|4800|0.083|800|K,J,H|
|AWCS001207075N6□00|5.6|250/250|20|4800|0.083|760|K,J,H|
|AWCS001207075N8□00|5.8|250/250|20|4800|0.083|760|K,J,H|
|AWCS001207076N2□00|6.2|250/250|20|4800|0.083|760|K,J,H|
|AWCS001207076N8□00|6.8|250/250|20|4800|0.083|680|K,J,H,G|
|AWCS001207077N3□00|7.3|250/250|20|4800|0.12|680|K,J,H|
|AWCS001207077N5□00|7.5|250/250|22|4800|0.1|680|K,J,H,G|
|AWCS001207078N2□00|8.2|250/250|22|4400|0.1|680|K,J,H|
|AWCS001207078N7□00|8.7|250/250|18|4100|0.2|480|K,J,H,G|
|AWCS001207079N0□00|9|250/250|22|4160|0.1|680|K,J,H|
|AWCS001207079N1□00|9.1|250/250|22|4160|0.1|680|K,J,H|



**NOTE: □-tolerance B=±0.1nH / G=±2% / H=±3% / J=±5% / K=±10%** 

1.Operating temperature range － 55 ℃ ~ 125 ℃ (Including self - temperature rise) 2.Irms for a 15℃ temperature rise from 25℃ ambient. 3.L/Q Test OSC @200mV. 

## ~~a~~ **AWCS00120707 Series Specification** AEC-Q200 

|**Part No.**|**Inductance**|**L/Q Test Freq.**|**Q**|**SRF**|**RDC**|**Irms**|**Tolerance**|
|---|---|---|---|---|---|---|---|
||**(nH)**|**(MHz)**|**Min.**|**(MHz)Min.**|**(Ω)Max.**|**(mA)Max.**||
|AWCS001207079N5□00|9.5|250/250|18|4000|0.2|480|K,J,H,G|
|AWCS0012070710N□00|10|250/250|21|3900|0.2|480|K,J,H,G|
|AWCS0012070711N□00|11|250/250|24|3680|0.12|640|K,J,H,G|
|AWCS0012070712N□00|12|250/250|24|3600|0.12|640|K,J,H,G|
|AWCS0012070713N□00|13|250/250|24|3450|0.21|440|K,J,H,G|
|AWCS0012070715N□00|15|250/250|24|3280|0.17|560|K,J,H,G|
|AWCS0012070716N□00|16|250/250|24|3100|0.22|560|K,J,H,G|
|AWCS0012070718N□00|18|250/250|25|3100|0.23|420|K,J,H,G|
|AWCS0012070719N□00|19|250/250|24|3040|0.2|480|K,J,H,G|
|AWCS0012070720N□00|20|250/250|25|3000|0.25|420|K,J,H,G|
|AWCS0012070722N□00|22|250/250|25|2800|0.3|400|K,J,H,G|
|AWCS0012070723N□00|23|250/250|22|2720|0.3|400|K,J,H,G|
|AWCS0012070724N□00|24|250/250|25|2700|0.3|400|K,J,H,G|
|AWCS0012070727N□00|27|250/250|24|2480|0.3|400|K,J,H,G|
|AWCS0012070730N□00|30|250/250|25|2350|0.35|400|K,J,H,G|
|AWCS0012070733N□00|33|250/250|24|2350|0.4|400|K,J,H,G|
|AWCS0012070736N□00|36|250/250|24|2320|0.44|320|K,J,H,G|
|AWCS0012070739N□00|39|250/250|25|2100|0.55|200|K,J,H,G|
|AWCS0012070740N□00|40|250/250|24|2240|0.65|320|K,J,H,G|
|AWCS0012070743N□00|43|250/250|25|2030|0.81|100|K,J,H,G|
|AWCS0012070747N□00|47|250/250|20|2100|0.83|150|K,J,H,G|
|AWCS0012070751N□00|51|250/250|25|1750|0.82|100|K,J,H,G|
|AWCS0012070756N□00|56|250/250|22|1760|0.97|100|K,J,H,G|
|AWCS0012070768N□00|68|250/250|22|1620|1.12|100|K,J,H,G|
|AWCS0012070772N□00|72|250/250|20|1260|2|30|K,J,H,G|
|AWCS0012070782N□00|82|250/250|20|1260|1.55|50|K,J,H,G|
|AWCS00120707R10□00|100|250/250|20|1160|2|30|K,J,H,G|
|AWCS00120707R18□00|180|100/100|8|700|2.7|50|K,J,H,G|
|AWCS00120707R22□00|220|100/100|8|700|4|50|K,J,H,G|



**NOTE: □-tolerance B=±0.1nH / G=±2% / H=±3% / J=±5% / K=±10%** 

1.Operating temperature range － 55 ℃ ~ 125 ℃ (Including self - temperature rise) 

2.Irms for a 15℃ temperature rise from 25℃ ambient. 

3.L/Q Test OSC @200mV. 

AEC-Q200 

## **AWCS00120707 Series Specification** 

**==> picture [146 x 27] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 AWCS00120707 Series<br>8.1 Construction:<br>**----- End of picture text -----**<br>


## **8.2 Material List:** 

|NO|PART|MATERIAL|
|---|---|---|
|1|WIRE|Grade  180|
|2|EPOXY|UV GLUE|
|3|CORE|CERAMIC|
|4|TERMINAL|Ag/Ni/Sn|



## **AWCS00120707 Series Specification** 

**==> picture [376 x 578] intentionally omitted <==**

**----- Start of picture text -----**<br>
AWCS00120707 Series Specification AEC-Q200<br>9 Reliability Of Ceramic Wire Wound Chip Inductor/CERAMIC SERIES<br>1-1.Environmental Performance<br>NO Item Specification Test Method<br>1-1-1 Board Flex  The forces applied on the rightTest device shall be soldered on the substrate<br>conditions must not damage Substrate Dimension: 100x40x1.6mm<br>the terminal electrode and the Deflection: 2.0mm<br>ferrite. Keeping Time: 60 sec<br>fof<br>1-1-2 Terminal Strength The chip must not damage theRefer to AEC-Q200-006<br>terminal electrode and the | Test device shall be soldered on the substrate wee<br>ferrite. Force 0.5lbs for 60±1 seconds for 0201 series<br>Force 1lbs for 60±1 seconds for 0402 series<br>Force 2lbs for 60±1 seconds for 0603 series<br>Force 1.8Kg for 60±1 seconds for the other series.<br>1-1-3 Solderability The electrodes shall be at   Pre-heating: 150 ℃ , 1min<br>least 95% covered with new Solder Composition: Sn/3.0Ag/0.5Cu<br>solder coating. Solder Temperature: 245±5 ℃<br>Immersion Time: 4±1sec<br>1-1-4 Resistance to Appearance:No damage  Pre-heating: 150 ℃ , 1min<br>Soldering Heat  Inductance change shall Solder Composition: Sn/Ag3.0/Cu0.5<br>be within ±10%. Solder Temperature: 260±5 ℃<br>Q change:within±30% of<br>cs initial value Immersion Time: 10±1sec<br>1-1-5 Resistance to Solvents There must be no change in Inductors must withstand 6 minutes of alcohol or water.<br>appearance or obliteration of<br>marking.<br>1-1-6 Mechanical Shock The forces applied on the rightPulse shape ： Half-sine waveform<br>conditions must not damage Impact acceleration ： 100 g<br>the terminal electrode and the Pulse duration ： 6 ms<br>ferrite. Number of shocks ： 18 shocks (3 shocks for each face)<br>a Orientation ： Bottom, top, left, right, front and rear faces<br>1-1-7 Vibration Appearance:No damage  Vibration waveform: Sine waveform<br>Inductance change shall be Vibration frequency: 10Hz~2000Hz<br> within ±10%. Vibration acceleration: 5g<br>Q change:within±30% of Sweep rate: 0.764386otcave/minute<br>initial value Duration of test: 12 cycles each of 3 orientations<br>20 minutes for each cycle<br>Vibration axes: X, Y & Z<br>1-2.Mechanical Performance<br>No Item Specification Test Method<br>1-2-1 High Temperature Temperature: 125±3 ℃<br>Exposure (Storage) Time: 1000hrs<br>fo SC Measured after exposure in the room condition for 24hrs<br>1-2-2 Low Temperature Appearance:No damage (for Temperature: -55±3 ℃<br>Exposure (Storage) microscope of CASTOR MZ-4 Time: 1000hrs<br>20X)Inductance change shall Measured after exposure in the room condition for 24hrs<br>J be within ±10%.<br>1-2-3 Biased Humidity Q change:within±30% of Temperature: 85±2 ℃<br>initial value Relative Humidity: 85%<br>Time: 1000hrs<br>i Measured after exposure in the room condition for 24hrs<br>1-2-4 Temperature Cycling Total cycles: 1000 cycles<br>Temperature Cycling Test Conditions : -55 to +125  ℃<br>Soak Mode Condition :  30 minutes<br>a Measured after exposure in the room condition for 24hrs<br>1-2-5 Operational Life Appearance:No damage  Temperature: 125±2 ℃<br>Inductance change shall Appliend Current : Rated Current<br>be within ±10%. Time: 1000± 24 hrs<br>a Measured after exposure in the room condition for 24hrs<br>**----- End of picture text -----**<br>


**==> picture [374 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
AWCS00120707 Series Specification AEC-Q200<br>**----- End of picture text -----**<br>


AEC-Q200 

## **AWCS00120707 Series Specification** 

**==> picture [482 x 49] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 Packaging:<br>_ |<br>10.1 Packaging -Cover Tape<br>The force for tearing off cover tape is 10 to 100 grams in the arrow direction.<br>**----- End of picture text -----**<br>


## **10.2 Packaging Quantity** 

**==> picture [144 x 28] intentionally omitted <==**

**----- Start of picture text -----**<br>
TYPE PCS/REEL<br>120707 4000<br>**----- End of picture text -----**<br>


**==> picture [448 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
10.3 Reel Dimensions<br>Dimensions in mm<br>TYPE A B C D<br>120707 178±1 60±0.5 12±0.5 1.5±0.5<br>**----- End of picture text -----**<br>


**AWCS00120707 Series Specification** 

AEC-Q200 

## **10 Packaging:** ~~_ |~~ 

## **10.4 Tape Dimensions in mm** 

**==> picture [349 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
TYPE A B C D E F G T K<br>120707 8.0 0.67 2 1.20 3.5 1.75 2 0.75 0.59<br>**----- End of picture text -----**<br>


## **11 Recommended Land Pattern:** ~~_ |~~ 

**==> picture [468 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions in mm<br>FAD<br>TYPE H(In/mm) I(In/mm) J(In/mm)<br>120707 0.026/0.66 0.014/0.36 0.018/0.46<br>all ee<br>12 Note:<br>_ |<br>1. Please make sure that your product has been evaluated and confirmed against your specifications<br>    when our product is mounted to your product.<br>**----- End of picture text -----**<br>


2. Do not knock nor drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from  such agreement. 

- 4.The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RHor less). 

If the storage period elapses, the soldering of the terminal   electrodes may deteriorate. 

- 5.Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). 

6. The moisture sensitivity level (MSL) of products is classified as level 1. 

AEC-Q200 

## **AWCS00120707 Series Specification** 

**==> picture [60 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
13 Graph:<br>**----- End of picture text -----**<br>


## **AWCS00120707 Series Specification** AEC-Q200 

AEC-Q200 

## **AWCS00120707 Series Specification** 

AEC-Q200 

## **AWCS00120707 Series Specification** 

AEC-Q200 

## **AWCS00120707 Series Specification** 

**AWCS00120707 Series Specification** AEC-Q200 

AEC-Q200 

## **AWCS00120707 Series Specification**

Updated at June 4, 2026

Pulse Electronics, a YAGEO company, is a global leader in the design and manufacturing of passive electronic components. With a legacy of innovation dating back to 1956, the company provides essential technology for the communications, computing, industrial, transportation, and IoT sectors. Pulse is recognized worldwide for delivering high-performance solutions that power advanced applications, ranging from 5G networks and electric vehicles to data centers and smart grids. The company's extensive product portfolio is heavily anchored in power and networking magnetics. This includes a comprehensive range of power inductors engineered for exceptional efficiency and reliability in demanding environments. To address complex electromagnetic compatibility challenges, Pulse also manufactures highly effective EMC and RFI suppression solutions, such as common mode chokes and filters, alongside specialized toroidal and RF inductors designed to ensure clean power delivery and optimal signal integrity. Beyond traditional magnetics, Pulse excels in the development of advanced wireless and power conversion components. Their connectivity solutions feature a wide array of high-performance RF antennas and single-band chip antennas tailored for modern connected devices. Furthermore, to support sophisticated power architectures, Pulse provides a broad spectrum of transformers—encompassing PCB-mounted designs, current sensing transformers, and precise pulse transformers—equipping engineers with robust, industry-proven components for power isolation and measurement.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →