APXG160ARA101ME61G

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Surface Mount 

## Upgrade! 

## Upgrade! **TM NPCAP -PXGSeries** 

- ・Super low ESR, high ripple current capability 

- ・Rated voltage range : 16 to 25Vdc, Capacitance range : 10 to 1,000μF 

- ・Case size : φ5×4.5L toφ10×12.2L 

- ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) 

- ・RoHS2 Compliant 

**==> picture [43 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
PXG<br>Downsized<br>PXE<br>**----- End of picture text -----**<br>


- ・Halogen Free 

## ◆ **SPECIFICATIONS** 

**Items Characteristics Category** -55 to +105℃ **Temperature Range Rated Voltage Range** 16 to 25Vdc **Capacitance Tolerance** ±20% (M) (at 20℃, 120Hz) **Leakage Current** Shall not exceed values shown in STANDARD RATINGS. *Note (at 20℃ after 2 minutes) **Dissipation Factor** 0.12 max. **(tan** δ **)** (at 20℃, 120Hz) **Low TemperatureCharacteristics** Z(-25℃)/Z(+20℃)≦1.15 ~~———~~ **(Max. Impedance Ratio)** Z(-55℃)/Z(+20℃)≦1.25 ~~==~~ (at 100kHz) **Endurance** The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (E46,F46 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value ~~aa~~ Leakage current ≦The initial specified value ~~n~~ **Bias Humidity** The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours (E46,F46 : 500 hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value **Surge Voltage** The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 16 20 25 Surge voltage (Vdc) 18 23 29 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value ~~a~~ Leakage current ≦The initial specified value **Soldering Heat** The following specifications shall be satisfied when the solder temperature is reduced back to 20°C after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value ~~ae~~ Leakage current ≦The initial specified value (Voltage treatment) *Note :  If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. 

## ◆ **DIMENSIONS [mm]** 

**==> picture [141 x 100] intentionally omitted <==**

**----- Start of picture text -----**<br>
●Terminal Code : A<br>W<br>0.3max. A±0.2<br>L±0.3 (Note)<br>Note :          for E46 and F46L [+0.1] -0.2<br>   L±0.5 for HA0, JA0 and JC0<br>±φD0.5 ±B0.2 P ±C0.2<br>**----- End of picture text -----**<br>


|||||||||◆**MARKING**|◆**MARKING**|
|---|---|---|---|---|---|---|---|---|---|
|**Size Code**|φ**D**|**L**|**A**|**B**|**C**|**W**|**P**|EX) 25V47µF||
|**E46**<br>**F46**<br>**E61**<br>**F61**<br>**F80**|5<br>6.3<br>5<br>6.3<br>6.3|4.5<br>4.5<br>5.8<br>5.8<br>7.7|5.3<br>6.6<br>5.3<br>6.6<br>6.6|5.3<br>6.6<br>5.3<br>6.6<br>6.6|5.9<br>7.2<br>5.9<br>7.2<br>7.2|0.5 to 0.8<br>0.5 to 0.8<br>0.5 to 0.8<br>0.5 to 0.8<br>0.5 to 0.8|1.4<br>1.9<br>1.4<br>1.9<br>1.9||G14A<br>**47**<br>**25V**|
|**H70**|8|6.7|8.3|8.3|9.0|0.7 to 1.1|3.1|||
|**H80**|8|7.7|8.3|8.3|9.0|0.7 to 1.1|3.1|||
|**HA0**|8|10.0|8.3|8.3|9.0|0.7 to 1.1|3.1|||
|**J80**|10|7.7|10.3|10.3|11.0|0.7 to 1.1|4.5|||
|**JA0**|10|10.0|10.3|10.3|11.0|0.7 to 1.1|4.5|||
|**JC0**|10|12.2|10.3|10.3|11.0|0.7 to 1.1|4.5|||



Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y Ver.2 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Surface Mount 

Upgrade! **TM NPCAP -PXGSeries** 

## ◆ **PART NUMBERING SYSTEM** 

**==> picture [265 x 98] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br>A P X G A R A M G<br>Supplement code<br>Size code<br>Capacitance tolerance code<br>Capacitance code (ex. 47µF:470, 100µF:101)<br>Taping code<br>Terminal code<br>Voltage code (ex. 16V:160, 20V:200)<br>Series code<br>Category<br>**----- End of picture text -----**<br>


Please refer to "Product code guide (conductive polymer type)" 

## ◆ **STANDARD RATINGS** 

**==> picture [502 x 458] intentionally omitted <==**

**----- Start of picture text -----**<br>
WV Cap Size Leakage current ESR Rated ripple current Part No.<br>(Vdc) (µF) code (µA max./after 2min.) (m Ω  max./20 ℃ , 100k to 300kHz) (mArms/105 ℃ , 100kHz)<br>39 E46 312 50 1,860 APXG160ARA390ME46G<br>68 F46 544 40 2,450 APXG160ARA680MF46G<br>100 E61 320 27 3,000 APXG160ARA101ME61G<br>180 F61 576 22 3,300 APXG160ARA181MF61G<br>220 F80 704 22 3,300 APXG160ARA221MF80G<br>270 H70 864 22 3,300 APXG160ARA271MH70G<br>330 H70 1,050 22 3,300 APXG160ARA331MH70G<br>16 330 H80 1,050 21 3,400 APXG160ARA331MH80G<br>330 HA0 1,050 21 3,400 APXG160ARA331MHA0G<br>560 HA0 1,790 18 3,900 APXG160ARA561MHA0G<br>560 J80 1,790 20 3,800 APXG160ARA561MJ80G<br>820 JA0 2,620 16 4,200 APXG160ARA821MJA0G<br>820 JC0 2,620 12 5,400 APXG160ARA821MJC0G<br>1,000 JA0 3,200 18 4,100 APXG160ARA102MJA0G<br>1,000 JC0 3,200 12 5,400 APXG160ARA102MJC0G<br>27 E46 270 55 1,770 APXG200ARA270ME46G<br>47 E61 188 30 2,800 APXG200ARA470ME61G<br>47 F46 470 42 2,400 APXG200ARA470MF46G<br>56 E61 224 30 2,800 APXG200ARA560ME61G<br>120 F61 480 25 3,200 APXG200ARA121MF61G<br>20 150 F80 600 25 3,200 APXG200ARA151MF80G<br>180 H70 720 25 3,200 APXG200ARA181MH70G<br>220 H80 880 23 3,300 APXG200ARA221MH80G<br>220 HA0 880 23 3,400 APXG200ARA221MHA0G<br>390 HA0 1,560 20 3,700 APXG200ARA391MHA0G<br>390 J80 1,560 22 3,650 APXG200ARA391MJ80G<br>560 JA0 2,240 18 4,100 APXG200ARA561MJA0G<br>10 E46 125 60 1,700 APXG250ARA100ME46G<br>22 E61 110 40 2,450 APXG250ARA220ME61G<br>22 F46 275 45 2,350 APXG250ARA220MF46G<br>27 E61 135 40 2,450 APXG250ARA270ME61G<br>27 F46 337 45 2,350 APXG250ARA270MF46G<br>39 F61 195 30 2,800 APXG250ARA390MF61G<br>47 F61 235 30 2,800 APXG250ARA470MF61G<br>56 F61 280 30 2,800 APXG250ARA560MF61G<br>56 F80 280 28 2,800 APXG250ARA560MF80G<br>25 68 F61 340 30 2,800 APXG250ARA680MF61G<br>68 H70 340 28 3,000 APXG250ARA680MH70G<br>82 H80 410 26 3,100 APXG250ARA820MH80G<br>100 HA0 500 24 3,300 APXG250ARA101MHA0G<br>120 F80 600 28 2,800 APXG250ARA121MF80G<br>120 HA0 600 22 3,500 APXG250ARA121MHA0G<br>150 H70 750 28 3,000 APXG250ARA151MH70G<br>150 J80 750 25 3,400 APXG250ARA151MJ80G<br>180 J80 900 25 3,400 APXG250ARA181MJ80G<br>220 JA0 1,100 20 3,800 APXG250ARA221MJA0G<br>**----- End of picture text -----**<br>


Production of the products shown in is scheduled to be discontinued. 

## ◆ **RATED RIPPLE CURRENT MULTIPLIERS** 

・Frequency Multipliers 

**==> picture [223 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
Frequency （ Hz ） 120 1k 10k 50k 100k to 500k<br>SMD type 0.05 0.30 0.55 0.70 1.00<br>**----- End of picture text -----**<br>


Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Product Guide 

- Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring. 

- Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications. 

- The products listed in this catalog are designed and manufactured for general electronics equipment use and are not intended for use in applications that can adversely affect human life; where the malfunction of equipment may cause damage to life or property. In addition, our products are not intended to be used in specific applications that may cause a major social impact. Please consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. 

- The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. 

   - Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. 

- We strongly recommend our customers to purchase Nippon Chemi-Con products only through our official sales channels. We assume no responsibility for any defects or damages caused by using products purchased from outside our official sales channel or of counterfeit goods. In addition, we will ask the customer to pay the investigation cost for products purchased outside our official sales channel. 

- We reserve the right to discontinue production and delivery of products. We do not guarantee that all the products included in this catalog will be available in the future. 

   - The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products 

- We continually strive to improve the quality and reliability of our products, but in any case that our product does not meet our published specifications, please stop using it promptly and contact us immediately. As for compensation for non-conforming goods delivered by Chemi-Con, we will limit it only to goods found in non-compliance of our published specifications. This may be accomplished by a no cost replacement of non-conforming individual products, a credit of the piece price paid per each individual non-conforming product, or in other ways deemed necessary. 

   - In addition, we have an established system with enhanced traceability, therefore we will limit the applicable lot items for any potential compensation. 

Part Numbering System Part Numbering System (Appendix) Standardization Available Items by Manufacturing Locations Environmental Measures 

Technical Note Precautions and Guidelines Recommended Soldering Conditions 

- Taping, Lead preforming, Terminal and Packaging Options 

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024