APXF4R0ARA391MF80G

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Surface Mount 

## **TM -PXFSeries** 

## **NPCAP** 

- ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. 

- ・Rated voltage range : 2 to 10Vdc, Capacitance range : 120 to 1,000μF 

- ・Case size range :φ5×3.9L toφ8×7.7L 

- ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. 

- ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) 

- ・RoHS2 Compliant 

**==> picture [44 x 46] intentionally omitted <==**

**----- Start of picture text -----**<br>
PXF<br>Lower ESR<br>PXE<br>**----- End of picture text -----**<br>


- ・Halogen Free 

## ◆ **SPECIFICATIONS** 

|**Items**|**Characteristics**|**Characteristics**|
|---|---|---|
|**Category**<br>**Temperature Range**|-55 to +105℃||
|**Rated Voltage Range**<br>~~————~~|2 to 10Vdc<br>~~————~~||
|**Capacitance Tolerance**<br>~~————~~|±20%(M)<br>(at 20℃,120Hz)<br>~~————~~||
|**Leakage Current**<br>*Note<br>~~————~~|Shall not exceed values shown in STANDARD RATINGS.<br>(at 20℃after 2 minutes)<br>~~————~~||
|**Dissipation Factor**<br>**(tan**δ**)**<br>~~————~~|0.12 max.<br>(at 20℃,120Hz)<br>~~————~~||
|**Low Temperature**<br>**Characteristics**<br>**(Max. Impedance Ratio)**<br>~~————~~|Z(-25℃)/Z(+20℃)≦1.15<br>Z(-55℃)/Z(+20℃)≦1.25<br>(at 100kHz)<br>~~————~~||
|**Endurance**<br>~~lez~~|The following specifications shall be satisfied when the capacitors are restored to 20℃after the rated voltage is applied for 15,000 hours<br>(E40,E46,F46 : 3,000 hours)at 105℃.<br>Appearance<br>No significant damage<br>Capacitance change<br>≦±20% of the initial value<br>D.F.(tanδ)<br>≦150% of the initial specified value<br>ESR<br>≦150% of the initial specified value<br>Leakage current<br>≦The initial specified value<br>~~lez!~~||
||Appearance<br>~~lez~~|No significant damage<br>~~lez~~|
||Capacitance change<br>~~lez~~|≦±20% of the initial value<br>~~lez~~|
||D.F.(tanδ)<br>~~lez~~|≦150% of the initial specified value<br>~~lez~~|
||ESR<br>~~lez~~|≦150% of the initial specified value<br>~~lez~~|
||Leakage current<br>~~lez~~|≦The initial specified value<br>~~lez~~|
|**Bias Humidity**<br>~~lez~~<br>~~ie~~|The following specifications shall be satisfied when the capacitors are restored to 20℃after subjecting them to the DC rated voltage at<br>60℃,90 to 95% RH for 1,000 hours(E40,E46,F46 : 500 hours).<br>Appearance<br>No significant damage<br>Capacitance change<br>≦±20% of the initial value<br>D.F.(tanδ)<br>≦150% of the initial specified value<br>ESR<br>≦150% of the initial specified value<br>Leakage current<br>≦The initial specified value<br>~~lez!~~<br>~~ie~~||
||Appearance<br>~~ie~~|No significant damage<br>~~ie~~|
||Capacitance change<br>~~ie~~|≦±20% of the initial value<br>~~ie~~|
||D.F.(tanδ)<br>~~ie~~|≦150% of the initial specified value<br>~~ie~~|
||ESR<br>~~ie~~|≦150% of the initial specified value<br>~~ie~~|
||Leakage current<br>~~ie~~|≦The initial specified value<br>~~ie~~|
|**Surge Voltage**<br>~~ie~~<br>~~a~~|The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃for 30 seconds<br>through aprotective resistor(R=1kΩ)and discharge for 5 minutes 30 seconds.<br>Rated voltage(Vdc)<br>2.0<br>2.5<br>4.0<br>6.3<br>10<br>Surge voltage(Vdc)<br>2.3<br>2.9<br>4.6<br>7.2<br>12<br>Appearance<br>No significant damage<br>Capacitance change<br>≦±20% of the initial value<br>D.F.(tanδ)<br>≦150% of the initial specified value<br>ESR<br>≦150% of the initial specified value<br>Leakage current<br>≦The initial specified value<br>~~ie~~<br>~~a~~||
||Appearance<br>~~ie~~|No significant damage<br>~~ie~~|
||Capacitance change<br>~~ie~~|≦±20% of the initial value<br>~~ie~~|
||D.F.(tanδ)<br>~~ie~~|≦150% of the initial specified value<br>~~ie~~|
||ESR<br>~~ie~~|≦150% of the initial specified value<br>~~ie~~|
||Leakage current<br>~~ie~~<br>~~a~~|≦The initial specified value<br>~~ie~~<br>~~a~~|
|**Soldering Heat**<br>~~ie~~<br>~~a~~|The following specifications shall be satisfied when the solder temperature is reduced back to 20°C after soldering has been<br>performed under the recommended solderingconditions.<br>Appearance<br>No significant damage<br>Capacitance value<br>Within the specified tolerance range<br>D.F.(tanδ)<br>≦The initial specified value<br>ESR<br>≦The initial specified value<br>Leakage current<br>≦The initial specified value (Voltage<br>treatment)<br>~~ie~~<br>~~a~~||
||Appearance<br>~~a~~|No significant damage<br>~~a~~|
||Capacitance value<br>~~a~~|Within the specified tolerance range<br>~~a~~|
||D.F.(tanδ)<br>~~a~~|≦The initial specified value<br>~~a~~|
||ESR<br>~~a~~|≦The initial specified value<br>~~a~~|
||Leakage current<br>~~a~~|≦The initial specified value (Voltage<br>treatment)<br>~~a~~|



- *Note :  If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. 

## ◆ **MARKING** 

## ◆ **DIMENSIONS [mm]** 

## ●Terminal Code : A 

|W<br>P<br>φD±0.5<br>B±0.2<br>C±0.2<br>●Terminal Code : ATerminal Code : A<br>**Size Code**<br>**L**<br>**A**<br>**B**<br>**C**<br>**W**<br>**P**<br>**E61**<br>5.8<br>5.3<br>5.3<br>5.9<br>0.5 to 0.8<br>1.4<br>φ**D**<br>5<br>**E46**<br>4.5<br>5.3<br>5.3<br>5.9<br>0.5 to 0.8<br>1.4<br>5<br>**E40**<br>3.9<br>5.3<br>5.3<br>5.9<br>0.5 to 0.8<br>1.4<br>5<br>F69A<br>**390**<br>**2.5V**<br>EX) 2.5V390µF<br>~~.~~|
|---|
|0.3max.<br>A±0.2<br>L±0.3 (Note)<br>**F61**<br>**F80**<br>**H70**<br>**H80**<br>6.3<br>6.3<br>8<br>8<br>5.8<br>7.7<br>6.7<br>7.7<br>6.6<br>6.6<br>8.3<br>8.3<br>6.6<br>6.6<br>8.3<br>8.3<br>7.2<br>7.2<br>9.0<br>9.0<br>0.5 to 0.8<br>0.5 to 0.8<br>0.7 to 1.1<br>0.7 to 1.1<br>1.9<br>1.9<br>3.1<br>3.1<br>**F46**<br>4.5<br>6.6<br>6.6<br>7.2<br>0.5 to 0.8<br>1.9<br>6.3<br>Note :          for E40, E46 and F46<br>L+0.1<br>-0.2|



Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y Ver.2 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Surface Mount 

## **TM NPCAP -PXFSeries** 

## ◆ **PART NUMBERING SYSTEM** 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 **A P X F A R A M G** Supplement code Size code Capacitance tolerance code Capacitance code (ex. 330µF:331, 1,000µF:102) Taping code Terminal code Voltage code (ex. 2.5V:2R5, 10V:100) Series code Category 

Please refer to "Product code guide (conductive polymer type)" 

## ◆ **STANDARD RATINGS** 

**==> picture [502 x 360] intentionally omitted <==**

**----- Start of picture text -----**<br>
WV Cap Size Leakage current ESR Rated ripple current Part No.<br>(Vdc) (µF) code (µA max./after 2min.) (m Ω  max./20 ℃ , 100k to 300kHz) (mArms/105 ℃ , 100kHz)<br>2 680 F61 700 12 3,500 APXF2R0ARA681MF61G<br>220 E40 700 12 3,300  APXF2R5ARA221ME40G<br>220 E46 700 25 2,100 APXF2R5ARA221ME46G<br>330 E61 700 10 3,900 APXF2R5ARA331ME61G<br>330 F46 700 12 3,500 APXF2R5ARA331MF46G<br>390 E61 700 10 3,900 APXF2R5ARA391ME61G<br>2.5 390 F61 292 10 3,900 APXF2R5ARA391MF61G<br>470 F80 352 9 4,200 APXF2R5ARA471MF80G<br>560 F61 700 10 3,900 APXF2R5ARA561MF61G<br>560 F80 420 9 4,200 APXF2R5ARA561MF80G<br>560 H70 420 10 4,500 APXF2R5ARA561MH70G<br>680 H70 510 10 4,500 APXF2R5ARA681MH70G<br>1,000 H80 750 9 4,500 APXF2R5ARA102MH80G<br>330 F61 396 10 3,900 APXF4R0ARA331MF61G<br>390 F80 468 9 4,200 APXF4R0ARA391MF80G<br>4 470 H70 564 10 4,500 APXF4R0ARA471MH70G<br>560 H70 672 10 4,500 APXF4R0ARA561MH70G<br>680 H80 816 9 4,500 APXF4R0ARA681MH80G<br>150 E40 700 20 2,700 APXF6R3ARA151ME40G<br>150 E46 700 25 2,100 APXF6R3ARA151ME46G<br>150 E61 700 12 3,500 APXF6R3ARA151ME61G<br>220 E61 700 12 3,500 APXF6R3ARA221ME61G<br>220 F61 415 10 3,900 APXF6R3ARA221MF61G<br>6.3 270 F80 510 9 4,200 APXF6R3ARA271MF80G<br>330 F61 700 10 3,900 APXF6R3ARA331MF61G<br>330 F80 623 9 4,200 APXF6R3ARA331MF80G<br>330 H70 623 10 4,500 APXF6R3ARA331MH70G<br>390 H70 737 10 4,500 APXF6R3ARA391MH70G<br>470 H80 888 9 4,500 APXF6R3ARA471MH80G<br>560 H80 1,050 9 4,500 APXF6R3ARA561MH80G<br>10 120 E61 240 22 2,600 APXF100ARA121ME61G<br>270 F61  540 20 2,800 APXF100ARA271MF61G<br>Production of the products shown in   is scheduled to be discontinued.<br>**----- End of picture text -----**<br>


## ◆ **RATED RIPPLE CURRENT MULTIPLIERS** 

・Frequency Multipliers 

**==> picture [223 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
Frequency （ Hz ） 120 1k 10k 50k 100k to 500k<br>SMD type 0.05 0.30 0.55 0.70 1.00<br>**----- End of picture text -----**<br>


Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Product Guide 

- Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring. 

- Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications. 

- The products listed in this catalog are designed and manufactured for general electronics equipment use and are not intended for use in applications that can adversely affect human life; where the malfunction of equipment may cause damage to life or property. In addition, our products are not intended to be used in specific applications that may cause a major social impact. Please consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. 

- The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. 

   - Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. 

- We strongly recommend our customers to purchase Nippon Chemi-Con products only through our official sales channels. We assume no responsibility for any defects or damages caused by using products purchased from outside our official sales channel or of counterfeit goods. In addition, we will ask the customer to pay the investigation cost for products purchased outside our official sales channel. 

- We reserve the right to discontinue production and delivery of products. We do not guarantee that all the products included in this catalog will be available in the future. 

   - The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products 

- We continually strive to improve the quality and reliability of our products, but in any case that our product does not meet our published specifications, please stop using it promptly and contact us immediately. As for compensation for non-conforming goods delivered by Chemi-Con, we will limit it only to goods found in non-compliance of our published specifications. This may be accomplished by a no cost replacement of non-conforming individual products, a credit of the piece price paid per each individual non-conforming product, or in other ways deemed necessary. 

   - In addition, we have an established system with enhanced traceability, therefore we will limit the applicable lot items for any potential compensation. 

Part Numbering System Part Numbering System (Appendix) Standardization Available Items by Manufacturing Locations Environmental Measures 

Technical Note Precautions and Guidelines Recommended Soldering Conditions 

- Taping, Lead preforming, Terminal and Packaging Options 

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024