APXE4R0ARA331MF61G

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Surface Mount 

## **TM -PXESeries** 

## **NPCAP** 

- ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. 

- (ESR and rated ripple current values are improved from PXA series.) 

- ・Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700μF 

- ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. 

- ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) 

**==> picture [44 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
PXF<br>Lower ESR<br>PXE<br>Lower ESR<br>PXA<br>**----- End of picture text -----**<br>


- ・RoHS2 Compliant 

- ・Halogen Free 

## ◆ **SPECIFICATIONS** 

**Items Characteristics Category** -55 to +105℃ **Temperature Range Rated Voltage Range** 2.5 to 16Vdc **Capacitance Tolerance** ±20% (M) (at 20℃, 120Hz) **Leakage Current** Shall not exceed values shown in STANDARD RATINGS. *Note (at 20℃ after 2 minutes) **Dissipation Factor** 0.12 max. **(tan** δ **)** (at 20℃, 120Hz) **Low TemperatureCharacteristics** Z(-25℃)/Z(+20℃)≦1.15 ~~———~~ **(Max. Impedance Ratio)** Z(-55℃)/Z(+20℃)≦1.25 ~~=~~ (at 100kHz) **Endurance** The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value ~~Sam~~ Leakage current ≦The initial specified value **Bias Humidity** The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value **Surge Voltage** The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective  resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 Surge voltage (Vdc) 2.9 4.6 7.2 12 18 Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value ~~——~~ Leakage current ≦The initial specified value **Soldering Heat** The following specifications shall be satisfied when the solder temperature is reduced back to 20°C after soldering has been performed under the recommended soldering conditions. Appearance No significant damage Capacitance value Within the specified tolerance range D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value (Voltage ~~eS~~ treatment) *Note :  If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. 

## ◆ **DIMENSIONS [mm]** 

**==> picture [483 x 112] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|◆|DIMENSIONS [mm]|◆|MARKING|
|●Terminal Code : A|Size Code|φ|D|L|A|B|C|W|P|EX) 2.5V390µF|
|E61|5|5.8|5.3|5.3|5.9|0.5 to 0.8|1.4|
|W|E49A|
|F61|6.3|5.8|6.6|6.6|7.2|0.5 to 0.8|1.9|
|F80|6.3|7.7|6.6|6.6|7.2|0.5 to 0.8|1.9|390|
|H70|8|6.7|8.3|8.3|9.0|0.7 to 1.1|3.1|2.5|[V]|
|H80|8|7.7|8.3|8.3|9.0|0.7 to 1.1|3.1|
|HA0|8|10.0|8.3|8.3|9.0|0.7 to 1.1|3.1|
|HC0|8|12.0|8.3|8.3|9.0|0.7 to 1.1|3.1|
|0.3max.|A±0.2|J80|10|7.7|10.3|10.3|11.0|0.7 to 1.1|4.5|
|L±0.3 (Note)|JA0|10|10.0|10.3|10.3|11.0|0.7 to 1.1|4.5|
|JC0|10|12.2|10.3|10.3|11.0|0.7 to 1.1|4.5|
|(Note) L±0.5 for HA0, HC0, JA0, JC0|

**----- End of picture text -----**<br>


Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y Ver.2 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Surface Mount 

## **TM NPCAP -PXESeries** 

## ◆ **PART NUMBERING SYSTEM** 

**==> picture [264 x 98] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br>A P X E A R A M G<br>Supplement code<br>Size code<br>Capacitance tolerance code<br>Capacitance code (ex. 47µF:470,100µF:101)<br>Taping code<br>Terminal code<br>Voltage code (ex. 6.3V:6R3,10V:100)<br>Series code<br>Category<br>**----- End of picture text -----**<br>


Please refer to "Product code guide (conductive polymer type)" 

## ◆ **STANDARD RATINGS** 

**==> picture [502 x 407] intentionally omitted <==**

**----- Start of picture text -----**<br>
WV Cap Size Leakage current ESR Rated ripple current Part No.<br>(Vdc) (µF) code (µA max./after 2min.) (m Ω  max./20 ℃ , 100k to 300kHz) (mArms/105 ℃ , 100kHz)<br>180 E61 90.0 21 2,670 APXE2R5ARA181ME61G<br>390 F61 195 15 3,160 APXE2R5ARA391MF61G<br>470 F80 235 13 3,600 APXE2R5ARA471MF80G<br>560 F80 280 13 3,600 APXE2R5ARA561MF80G<br>560 H70 280 13 4,100 APXE2R5ARA561MH70G<br>680 H70 340 13 4,100 APXE2R5ARA681MH70G<br>2.5 820 H80 410 12 4,260 APXE2R5ARA821MH80G<br>820 HC0 410 9 5,400 APXE2R5ARA821MHC0G<br>1,000 H80 500 12 4,260 APXE2R5ARA102MH80G<br>1,200 J80 600 13 4,450 APXE2R5ARA122MJ80G<br>1,500 HA0 750 10 5,220 APXE2R5ARA152MHA0G<br>1,500 HC0 750 9 5,400 APXE2R5ARA152MHC0G<br>2,200 JA0 1,100 10 5,500 APXE2R5ARA222MJA0G<br>2,700 JC0 1,350 9 5,600 APXE2R5ARA272MJC0G<br>100 E61 80.0 22 2,610 APXE4R0ARA101ME61G<br>150 E61 120 22 2,610 APXE4R0ARA151ME61G<br>270 F61 216 15 3,160 APXE4R0ARA271MF61G<br>330 F61 264 15 3,160 APXE4R0ARA331MF61G<br>390 F80 312 14 3,470 APXE4R0ARA391MF80G<br>470 H70 376 14 3,950 APXE4R0ARA471MH70G<br>560 H70 448 14 3,950 APXE4R0ARA561MH70G<br>4 680 H80 544 13 3,950 APXE4R0ARA681MH80G<br>1,000 HA0 800 10 5,220 APXE4R0ARA102MHA0G<br>1,000 J80 800 14 4,300 APXE4R0ARA102MJ80G<br>1,200 HC0 960 9 5,400 APXE4R0ARA122MHC0G<br>1,200 JA0 960 10 5,500 APXE4R0ARA122MJA0G<br>1,500 JA0 1,200 10 5,500 APXE4R0ARA152MJA0G<br>1,800 JA0 1,440 10 5,500 APXE4R0ARA182MJA0G<br>1,800 JC0 1,440 9 5,600 APXE4R0ARA182MJC0G<br>100 E61 126 24 2,500 APXE6R3ARA101ME61G<br>120 E61 151 24 2,500 APXE6R3ARA121ME61G<br>220 F61 277 15 3,160 APXE6R3ARA221MF61G<br>270 F80 340 14 3,470 APXE6R3ARA271MF80G<br>330 F80 415 14 3,470 APXE6R3ARA331MF80G<br>330 H70 415 14 3,950 APXE6R3ARA331MH70G<br>6.3 390 H70 491 14 3,950 APXE6R3ARA391MH70G<br>470 H80 592 13 3,950 APXE6R3ARA471MH80G<br>820 HA0 1,030 12 4,770 APXE6R3ARA821MHA0G<br>820 HC0 1,030 10 5,150 APXE6R3ARA821MHC0G<br>820 J80 1,030 14 4,300 APXE6R3ARA821MJ80G<br>1,200 JA0 1,510 12 5,025 APXE6R3ARA122MJA0G<br>1,500 JA0 1,890 12 5,025 APXE6R3ARA152MJA0G<br>1,500 JC0 1,890 10 5,500 APXE6R3ARA152MJC0G<br>Production of the products shown in   is scheduled to be discontinued.<br>**----- End of picture text -----**<br>


Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

## **TM NPCAP -PXESeries** 

## ◆ **STANDARD RATINGS** 

**==> picture [502 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
WV Cap Size Leakage current ESR Rated ripple current Part No.<br>(Vdc) (µF) code (µA max./after 2min.) (m Ω  max./20 ℃ , 100k to 300kHz) (mArms/105 ℃ , 100kHz)<br>47 E61 94.0 28 2,310 APXE100ARA470ME61G<br>56 E61 112 28 2,310 APXE100ARA560ME61G<br>68 E61 136 28 2,310 APXE100ARA680ME61G<br>120 F61 240 25 2,530 APXE100ARA121MF61G<br>150 F80 300 21 2,880 APXE100ARA151MF80G<br>10 220 H70 440 21 3,220 APXE100ARA221MH70G<br>270 H70 540 21 3,220 APXE100ARA271MH70G<br>330 H80 660 19 3,390 APXE100ARA331MH80G<br>390 HA0 780 17 4,000 APXE100ARA391MHA0G<br>470 J80 940 19 3,800 APXE100ARA471MJ80G<br>680 JA0 1,360 13 4,820 APXE100ARA681MJA0G<br>33 E61 105 35 2,070 APXE160ARA330ME61G<br>39 E61 124 35 2,070 APXE160ARA390ME61G<br>68 F61 217 28 2,390 APXE160ARA680MF61G<br>82 F80 262 24 2,700 APXE160ARA820MF80G<br>100 F80 320 24 2,700 APXE160ARA101MF80G<br>16 100 H70 320 24 3,010 APXE160ARA101MH70G<br>120 H70 384 24 3,010 APXE160ARA121MH70G<br>150 H80 480 22 3,150 APXE160ARA151MH80G<br>180 HA0 576 18 3,890 APXE160ARA181MHA0G<br>220 HA0 704 18 3,890 APXE160ARA221MHA0G<br>220 J80 704 22 3,450 APXE160ARA221MJ80G<br>330 JA0 1,050 16 4,350 APXE160ARA331MJA0G<br>Production of the products shown in   is scheduled to be discontinued.<br>**----- End of picture text -----**<br>


## ◆ **RATED RIPPLE CURRENT MULTIPLIERS** 

・Frequency Multipliers 

**==> picture [223 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
Frequency （ Hz ） 120 1k 10k 50k 100k to 500k<br>SMD type 0.05 0.30 0.55 0.70 1.00<br>**----- End of picture text -----**<br>


Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024 

**CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS** 

Product Guide 

- Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults and accidents from occurring. 

- Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications. 

- The products listed in this catalog are designed and manufactured for general electronics equipment use and are not intended for use in applications that can adversely affect human life; where the malfunction of equipment may cause damage to life or property. In addition, our products are not intended to be used in specific applications that may cause a major social impact. Please consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles, trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose applications. 

- The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and determine whether or not our products suit your requirements according to the specifications of your equipment systems. Therefore, you bear final responsibility regarding the use of our products. 

   - Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction. 

- We strongly recommend our customers to purchase Nippon Chemi-Con products only through our official sales channels. We assume no responsibility for any defects or damages caused by using products purchased from outside our official sales channel or of counterfeit goods. In addition, we will ask the customer to pay the investigation cost for products purchased outside our official sales channel. 

- We reserve the right to discontinue production and delivery of products. We do not guarantee that all the products included in this catalog will be available in the future. 

   - The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products 

- We continually strive to improve the quality and reliability of our products, but in any case that our product does not meet our published specifications, please stop using it promptly and contact us immediately. As for compensation for non-conforming goods delivered by Chemi-Con, we will limit it only to goods found in non-compliance of our published specifications. This may be accomplished by a no cost replacement of non-conforming individual products, a credit of the piece price paid per each individual non-conforming product, or in other ways deemed necessary. 

   - In addition, we have an established system with enhanced traceability, therefore we will limit the applicable lot items for any potential compensation. 

Part Numbering System Part Numbering System (Appendix) Standardization Available Items by Manufacturing Locations Environmental Measures 

Technical Note Precautions and Guidelines Recommended Soldering Conditions 

- Taping, Lead preforming, Terminal and Packaging Options 

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 

CAT. No. E1001Y 2024