Image not available
Illustrative purposes only
APV-8-5
LED Driver, ITE, 7 W, 5 VDC, 1.4 A, Constant Voltage, 90 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- SVHC: No SVHC (25-Jun-2025)
- Product Range: APV-8
- Output Current: 1.4A
- LED Driver Mode: Constant Voltage
- Output Power Max: 7W
- Input Voltage Max: 264V
- Input Voltage Min: 90V
- Output Voltage Max: 5VDC
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 250 |
| Price | 5.51 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**- APV 8 series** ## 8W Single Output Switching Power Supply **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> **==> picture [11 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> Ⅱ<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> _File Name:APV-8-SPEC 2015-07-20_ **- APV 8 series** ## 8W Single Output Switching Power Supply ## **SPECIFICATION** |**MODEL**<br>**APV-8-5**<br>**APV-8-12**<br>**APV-8-24**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER LOAD**<br>**OVER VOLTAGE**<br>5V<br>12V<br>24V<br>1.4A<br>0.67A<br>0.34A<br>0 ~ 1.4A<br>0 ~ 0.67A<br>0 ~ 0.34A<br>7W<br>8W<br>8W<br>250mVp-p<br>250mVp-p<br>300mVp-p<br>±5.0%<br>±1.0%<br>±2.0%<br>500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC (<br>)<br>**Note.6**<br>47 ~ 63Hz<br>74%<br>80%<br>81%<br>5.75 ~ 6.75V<br>13.8 ~ 16V<br>27.6 ~ 32.4V<br>0.15A/230VAC 0.3A/115VAC<br>COLD START 70A(twidth=120 s measured at 50% Ipeak) at 230VAC<br>μ<br>0.25mA / 240VAC<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 45<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>℃<br>Protection type : Shut off o/p voltage, clamping by zener diode<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>20ms/230VAC at full load<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**EMC IMMUNITY**<br>Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3<br>Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A<br>**EMC EMISSION**<br>60*30*22(L*W*H)<br>1631.5K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>0.09Kg; 144pcs/14Kg/0.71CUFT<br>Design refer to UL8750,CSA C22.2 No.250.0-08; EN60950-1,EN61347-1,EN61347-2-13<br>Above 105% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>**SHORT CIRCUIT**<br>Hiccup mode, recovers automatically after fault condition is removed<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 _of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the static characteristics for more details.<br>5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. When applying DC voltage for input, please connect the brown input wire to the positive side whereas blue input wire to the negative side.<br>7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.|**MODEL**<br>**APV-8-5**<br>**APV-8-12**<br>**APV-8-24**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER LOAD**<br>**OVER VOLTAGE**<br>5V<br>12V<br>24V<br>1.4A<br>0.67A<br>0.34A<br>0 ~ 1.4A<br>0 ~ 0.67A<br>0 ~ 0.34A<br>7W<br>8W<br>8W<br>250mVp-p<br>250mVp-p<br>300mVp-p<br>±5.0%<br>±1.0%<br>±2.0%<br>500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC (<br>)<br>**Note.6**<br>47 ~ 63Hz<br>74%<br>80%<br>81%<br>5.75 ~ 6.75V<br>13.8 ~ 16V<br>27.6 ~ 32.4V<br>0.15A/230VAC 0.3A/115VAC<br>COLD START 70A(twidth=120 s measured at 50% Ipeak) at 230VAC<br>μ<br>0.25mA / 240VAC<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 45<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>℃<br>Protection type : Shut off o/p voltage, clamping by zener diode<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>20ms/230VAC at full load<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**EMC IMMUNITY**<br>Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3<br>Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A<br>**EMC EMISSION**<br>60*30*22(L*W*H)<br>1631.5K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>0.09Kg; 144pcs/14Kg/0.71CUFT<br>Design refer to UL8750,CSA C22.2 No.250.0-08; EN60950-1,EN61347-1,EN61347-2-13<br>Above 105% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>**SHORT CIRCUIT**<br>Hiccup mode, recovers automatically after fault condition is removed<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 _of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the static characteristics for more details.<br>5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. When applying DC voltage for input, please connect the brown input wire to the positive side whereas blue input wire to the negative side.<br>7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.|**APV-8-5**|**APV-8-12**|**APV-8-24**| |---|---|---|---|---| ||**DC VOLTAGE**|5V|12V|24V| ||**RATED CURRENT**|1.4A|0.67A|0.34A| ||**CURRENT RANGE**|0 ~ 1.4A|0 ~ 0.67A|0 ~ 0.34A| ||**RATED POWER**|7W|8W|8W| ||**RIPPLE & NOISE (max.) Note.2**|250mVp-p|250mVp-p|300mVp-p| ||**VOLTAGE TOLERANCE Note.3**|±5.0%||| ||**LINE REGULATION**|±1.0%||| ||**LOAD REGULATION**|±2.0%||| ||**SETUP, RISE TIME**|500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load||| ||**HOLD UP TIME (Typ.)**|20ms/230VAC at full load||| ||**VOLTAGE RANGE Note.4**|90 ~ 264VAC 127 ~ 370VDC (<br>)<br>**Note.6**||| ||**FREQUENCY RANGE**|47 ~ 63Hz||| ||**EFFICIENCY (Typ.)**|74%|80%|81%| ||**AC CURRENT**|0.15A/230VAC 0.3A/115VAC||| ||**INRUSH CURRENT(Typ.)**|COLD START 70A(twidth=120 s measured at 50% Ipeak) at 230VAC<br>μ||| ||**LEAKAGE CURRENT**|0.25mA / 240VAC||| ||**SHORT CIRCUIT**|Hiccup mode, recovers automatically after fault condition is removed||| ||**OVER LOAD**|Above 105% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed||| ||**OVER VOLTAGE**|5.75 ~ 6.75V<br>13.8 ~ 16V<br>27.6 ~ 32.4V<br>Protection type : Shut off o/p voltage, clamping by zener diode||| ||**WORKING TEMP.**|-30 ~ +70<br>(Refer to "Derating Curve")<br>℃||| ||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing||| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +80<br>, 10 ~ 95% RH<br>℃||| ||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 45<br>)||| ||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes||| ||**SAFETY STANDARDS**|Design refer to UL8750,CSA C22.2 No.250.0-08; EN60950-1,EN61347-1,EN61347-2-13||| ||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC||| ||**ISOLATION RESISTANCE**|I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||| ||**EMC EMISSION**|Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3||| ||**EMC IMMUNITY**|Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A||| ||**MTBF**|1631.5K hrs min. MIL-HDBK-217F (25<br>)<br>℃||| ||**DIMENSION**|60*30*22(L*W*H)||| ||**PACKING**<br>℃<br>0.09Kg; 144pcs/14Kg/0.71CUFT<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 _of ambienttemperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the static characteristics for more details.<br>5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be<br>affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. When applying DC voltage for input, please connect the brown input wire to the positive side whereas blue input wire to the negative side.<br>7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.|||| _File Name:APV-8-SPEC 2015-07-20_ **- APV 8 series** ## 8W Single Output Switching Power Supply **==> picture [511 x 668] intentionally omitted <==** **----- Start of picture text -----**<br> Mechanical Specification Unit:mm<br>73.1<br>65.5<br>60 150±10<br>+V(Red)<br>UL1569 18AWG -V(Black)<br>AC/N(Blue) UL1569 20AWG<br>AC/L(Brown)<br>150±10<br>Block Diagram<br>fosc : 67KHz<br>POWER RECTIFIERS +V<br>I/P EMI FILTER RECTIFIERS SWITCHING & -V<br>FILTER<br>DETECTION<br>CIRCUIT<br>PWM<br>CONTROL<br>Derating Curve Static Characteristics<br>100<br>100<br>90<br>80<br>80<br>60 70<br>50<br>60<br>40<br>50<br>20<br>40<br>-30 0 10 20 30 40 45 50 60 70 (HORIZONTAL) 90 100 200 210 220 230 240 250 264<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (VAC) 60Hz<br>30 8.5<br>22<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br> _File Name:APV-8-SPEC 2015-07-20_
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →