Image not available
Illustrative purposes only
APV-25-12
LED Driver, ITE, 25.2 W, 12 VDC, 2.1 A, Constant Voltage, 90 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- SVHC: No SVHC (25-Jun-2025)
- Product Range: APV-25
- Output Current: 2.1A
- LED Driver Mode: Constant Voltage
- Output Power Max: 25.2W
- Input Voltage Max: 264V
- Input Voltage Min: 90V
- Output Voltage Max: 12VDC
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 250 |
| Price | 10.49 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**- APV 25 series**
25W Single Output Switching Power Supply ~~Cee~~ ee ee ee ee ee ee
## ■
|**MODEL**<br>**APV-25-5**<br>**APV-25-12**<br>**APV-25-15**<br>**APV-25-24**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER LOAD**<br>**OVER VOLTAGE**<br>5V<br>12V<br>15V<br>24V<br>3.5A<br>2.1A<br>1.68A<br>1.05A<br>0 ~ 3.5A<br>0 ~ 2.1A<br>0 ~ 1.68A<br>0 ~ 1.05A<br>17.5W<br>25.2W<br>25.2W<br>25.2W<br>120mVp-p<br>150mVp-p<br>150mVp-p<br>150mVp-p<br>±5.0%<br>±1.0%<br>±2.0%<br>1500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC<br>47 ~ 63Hz<br>75.5%<br>82%<br>83%<br>83%<br>5.75 ~ 6.95V<br>13.8 ~ 16.2V<br>17.25 ~ 21V<br>27 ~ 32.4V<br>0.4A/230VAC 0.8A/115VAC<br>COLD START 45A(twidth=310 s measured at 50% Ipeak) at 230VAC<br>μ<br>0.25mA / 240VAC<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>84*57*29.5mm (L*W*H)<br>℃<br>℃<br>℃<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>20ms/230VAC 12ms/115VAC at full load<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>692.8K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>**EMC IMMUNITY**<br>Compliance to EN55032,EN61000-3-2 Class A,EN61000-3-3, EAC TP TC 020<br>Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A, EAC TP TC 020<br>**EMC EMISSION**<br>**APV-25-36**<br>36V<br>0.7A<br>0 ~ 0.7A<br>25.2W<br>150mVp-p<br>84%<br>41.4 ~ 48.6V<br>-30 ~ 70<br>(Refer to "Derating Curve")<br>℃<br>Above 105% rated output power<br>Protection type : Shut down o/p voltage, re-power on to recover<br>0.13Kg; 72pcs / 10.4Kg / 0.92CUFT<br>UL8750 , CSA-C22.2 No. 250.0-13, BIS IS15885(except for 15V,36V), EAC TP TC 004,IP42 approved; design refer to EN60950-1<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>9 units (circuit breaker of type B) / 15 units (circuit breaker of type C) at 230VAC<br>e~~G~~<br>Rr~~GO~~<br>Re~~GO~~<br>~~OO~~<br>~~OO~~<br>~~RG~~<br>aa<br>a<br>a<br>a<br>a<br>a<br>re<br>ee<br>a<br>a ~~Re~~<br>Be<br>__—_,,-,1{-_Y_H_<br>Re~~CC~~<br>ee~~ee~~<br>aa<br>a~~se~~<br>a<br>a<br>a<br>~~ee~~<br>a<br>a<br>a<br>a<br>aSS<br>oe<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the static characteristics for more details.<br>5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.<br>8. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>+ /1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|**MODEL**<br>**APV-25-5**<br>**APV-25-12**<br>**APV-25-15**<br>**APV-25-24**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**Note.6**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**AC CURRENT**<br>**INPUT**<br>**INRUSH CURRENT(Typ.)**<br>**LEAKAGE CURRENT**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER LOAD**<br>**OVER VOLTAGE**<br>5V<br>12V<br>15V<br>24V<br>3.5A<br>2.1A<br>1.68A<br>1.05A<br>0 ~ 3.5A<br>0 ~ 2.1A<br>0 ~ 1.68A<br>0 ~ 1.05A<br>17.5W<br>25.2W<br>25.2W<br>25.2W<br>120mVp-p<br>150mVp-p<br>150mVp-p<br>150mVp-p<br>±5.0%<br>±1.0%<br>±2.0%<br>1500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load<br>90 ~ 264VAC 127 ~ 370VDC<br>47 ~ 63Hz<br>75.5%<br>82%<br>83%<br>83%<br>5.75 ~ 6.95V<br>13.8 ~ 16.2V<br>17.25 ~ 21V<br>27 ~ 32.4V<br>0.4A/230VAC 0.8A/115VAC<br>COLD START 45A(twidth=310 s measured at 50% Ipeak) at 230VAC<br>μ<br>0.25mA / 240VAC<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>20 ~ 90% RH non-condensing<br>-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes<br>84*57*29.5mm (L*W*H)<br>℃<br>℃<br>℃<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**ENVIRONMENT**<br>**SAFETY &**<br>**EMC**<br>**PROTECTION**<br>20ms/230VAC 12ms/115VAC at full load<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC<br>I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>692.8K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>**EMC IMMUNITY**<br>Compliance to EN55032,EN61000-3-2 Class A,EN61000-3-3, EAC TP TC 020<br>Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A, EAC TP TC 020<br>**EMC EMISSION**<br>**APV-25-36**<br>36V<br>0.7A<br>0 ~ 0.7A<br>25.2W<br>150mVp-p<br>84%<br>41.4 ~ 48.6V<br>-30 ~ 70<br>(Refer to "Derating Curve")<br>℃<br>Above 105% rated output power<br>Protection type : Shut down o/p voltage, re-power on to recover<br>0.13Kg; 72pcs / 10.4Kg / 0.92CUFT<br>UL8750 , CSA-C22.2 No. 250.0-13, BIS IS15885(except for 15V,36V), EAC TP TC 004,IP42 approved; design refer to EN60950-1<br>**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**<br>9 units (circuit breaker of type B) / 15 units (circuit breaker of type C) at 230VAC<br>e~~G~~<br>Rr~~GO~~<br>Re~~GO~~<br>~~OO~~<br>~~OO~~<br>~~RG~~<br>aa<br>a<br>a<br>a<br>a<br>a<br>re<br>ee<br>a<br>a ~~Re~~<br>Be<br>__—_,,-,1{-_Y_H_<br>Re~~CC~~<br>ee~~ee~~<br>aa<br>a~~se~~<br>a<br>a<br>a<br>~~ee~~<br>a<br>a<br>a<br>a<br>aSS<br>oe<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the static characteristics for more details.<br>5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.<br>8. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>+ /1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf|**APV-25-5**<br>e<br>~~GO~~|**APV-25-12**<br>e~~G~~<br>~~GO~~|**APV-25-15**<br>~~G~~<br>~~GO~~|**APV-25-24**<br>~~G~~<br>~~GO~~|**APV-25-36**<br>~~G~~<br>~~GO~~|
|---|---|---|---|---|---|---|
||**DC VOLTAGE**<br>e<br>Rr<br>Re|5V<br>e<br>~~GO~~<br>~~GO~~|12V<br>e~~G~~<br>~~GO~~<br>~~GO~~|15V<br>~~G~~<br>~~GO~~<br>~~GO~~|24V<br>~~G~~<br>~~GO~~<br>~~GO~~|36V<br>~~G~~<br>~~GO~~<br>~~GO~~|
||**RATED CURRENT**<br>Rr<br>Re|3.5A<br>~~GO~~<br>~~GO~~|2.1A<br>~~GO~~<br>~~GO~~|1.68A<br>~~GO~~<br>~~GO~~|1.05A<br>~~GO~~<br>~~GO~~|0.7A<br>~~GO~~<br>~~GO~~|
||**CURRENT RANGE**<br>Re<br>~~OO~~|0 ~ 3.5A<br>~~GO~~<br>~~OO~~|0 ~ 2.1A<br>~~GO~~<br>~~OO~~|0 ~ 1.68A<br>~~GO~~<br>~~OO~~|0 ~ 1.05A<br>~~GO~~<br>~~OO~~|0 ~ 0.7A<br>~~GO~~<br>~~OO~~|
||**RATED POWER**<br>~~OO~~<br>~~OO~~|17.5W<br>~~OO~~<br>~~OO~~|25.2W<br>~~OO~~<br>~~OO~~|25.2W<br>~~OO~~<br>~~OO~~|25.2W<br>~~OO~~<br>~~OO~~|25.2W<br>~~OO~~<br>~~OO~~|
||**RIPPLE & NOISE (max.) Note.2**<br>~~RG~~<br>a|120mVp-p<br>~~RG~~|150mVp-p<br>~~RG~~|150mVp-p<br>~~RG~~|150mVp-p<br>~~RG~~|150mVp-p<br>~~RG~~|
||**VOLTAGE TOLERANCE Note.3**<br>~~RG~~<br>aa|±5.0%<br>~~RG~~|||||
||**LINE REGULATION**<br>aa|±1.0%|||||
||**LOAD REGULATION**<br>a<br>a|±2.0%|||||
||**SETUP, RISE TIME**<br>**Note.6**<br>a<br>a|1500ms, 30ms / 230VAC 1500ms,30ms / 115VAC at full load|||||
||**HOLD UP TIME (Typ.)**<br>a|20ms/230VAC 12ms/115VAC at full load|||||
||**VOLTAGE RANGE**<br>**Note.4**<br>a<br>a|90 ~ 264VAC 127 ~ 370VDC|||||
||**FREQUENCY RANGE**<br>a<br>a<br>re|47 ~ 63Hz|||||
||**EFFICIENCY (Typ.)**<br>re<br>ee|75.5%|82%|83%|83%|84%|
||**AC CURRENT**<br>re<br>ee|0.4A/230VAC 0.8A/115VAC|||||
||**INRUSH CURRENT(Typ.)**<br>ee<br>a|COLD START 45A(twidth=310 s measured at 50% Ipeak) at 230VAC<br>μ|||||
||**MAX. No. of PSUs on 16A**<br>**CIRCUIT BREAKER**|9 units (circuit breaker of type B) / 15 units (circuit breaker of type C) at 230VAC|||||
||**LEAKAGE CURRENT**<br>a<br>Be<br>__—_,,-,1{-_Y_H_|0.25mA / 240VAC<br>~~Re~~<br>__—_,,-,1{-_Y_H_|||||
||**OVER LOAD**<br>a <br>Be<br>__—_,,-,1{-_Y_H_<br>ee<br>a|Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>Above 105% rated output power<br> ~~Re~~<br>__—_,,-,1{-_Y_H_<br>Re~~CC~~<br>~~ee~~|||||
||**OVER VOLTAGE**<br> <br>Be<br>__—_,,-,1{-_Y_H_<br>ee<br>a|5.75 ~ 6.95V<br>13.8 ~ 16.2V<br>17.25 ~ 21V<br>27 ~ 32.4V<br>41.4 ~ 48.6V<br>Protection type : Shut down o/p voltage, re-power on to recover<br> ~~Re~~<br>__—_,,-,1{-_Y_H_<br>Re~~CC~~<br>~~ee~~|||||
||**WORKING TEMP.**<br>ee<br>aa|-30 ~ 70<br>(Refer to "Derating Curve")<br>℃<br>Re~~CC~~<br>~~ee~~|||||
||**WORKING HUMIDITY**<br><br>aa<br>a|20 ~ 90% RH non-condensing<br>~~ee~~<br>|||||
||**STORAGE TEMP., HUMIDITY**<br>a<br>a~~se~~|-40 ~ +80<br>, 10 ~ 95% RH<br>℃<br>~~se~~|||||
||**TEMP. COEFFICIENT**<br>a~~se~~<br>a|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>~~se~~|||||
||**VIBRATION**<br>a<br>a|10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes|||||
||**SAFETY STANDARDS**<br>a<br>a|UL8750 , CSA-C22.2 No. 250.0-13, BIS IS15885(except for 15V,36V), EAC TP TC 004,IP42 approved; design refer to EN60950-1|||||
||**WITHSTAND VOLTAGE**<br>a<br>a|I/P-O/P:3KVAC|||||
||**ISOLATION RESISTANCE**<br>a<br>~~ee~~<br>a|I/P-O/P:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>~~ee~~|||||
||**EMC EMISSION**<br>~~ee~~<br>a|Compliance to EN55032,EN61000-3-2 Class A,EN61000-3-3, EAC TP TC 020<br>~~ee~~|||||
||**EMC IMMUNITY**<br>a<br>a|Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A, EAC TP TC 020|||||
||**MTBF**<br>a<br>a|692.8K hrs min. MIL-HDBK-217F (25<br>)<br>℃|||||
||**DIMENSION**<br>a<br>a|84*57*29.5mm (L*W*H)<br>|||||
||**PACKING**<br>℃<br>℃<br>℃<br>0.13Kg; 72pcs / 10.4Kg / 0.92CUFT<br>a<br>aSS<br>oe<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance: includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltage. Please check the static characteristics for more details.<br>5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the<br>complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.<br>6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.<br>7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit.<br>8. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>+ /1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. For any application note and IP water proof function installation caution, please refer our user manual before using.<br>https://www.meanwell.com/Upload/PDF/LED_EN.pdf||||||
_File Name:APV-25-SPEC 2018-09-29_
**- APV 25 series**
## 25W Single Output Switching Power Supply
**==> picture [511 x 668] intentionally omitted <==**
**----- Start of picture text -----**<br>
Mechanical Specification<br>Case No.PCD16A Unit:mm<br>3 84<br>150±10<br>UL1569 18AWG<br>V-(BLACK)<br>V+(RED)<br>7.3<br>7.3<br>150±10<br>AC/N(Blue) UL1569 18AWG<br>T case 5<br>AC/L(Brown)<br>3<br>※ T case: Max. Case Temperature.<br>Block Diagram<br>fosc : 60KHz<br>POWER RECTIFIERS +V<br>I/P EMI FILTER RECTIFIERS SWITCH- &<br>-V<br>ING FILTER<br>DETECTION<br>CIRCUIT<br>PWM<br>CONTROL<br>Derating Curve Static Characteristics<br>100<br>100<br>90<br>80<br>80<br>60 70<br>50<br>60<br>40<br>50<br>20<br>40<br>-30 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 100 200 210 220 230 240 250 264<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (VAC) 60Hz<br>2-ψ8.9<br>3.6<br>2-ψ<br>LOAD (%) LOAD (%)<br>15.3<br>57<br>15.3<br>29.5<br>1.9<br>5<br>**----- End of picture text -----**<br>
_File Name:APV-25-SPEC 2018-09-29_
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →