APCF00070745102M00

**Power Inductor Automotive Grade APCF Series** 

## **Overview** 

Power inductors are passive electronic components used in various circuits to store energy in a magnetic field when electrical current flows through them. They are critical in filtering, energy storage, and noise suppression in power electronic systems. 

They are designed to handle higher currents and are optimized for minimal power loss and thermal efficiency. 

## **Benefits** 

1. Automotive grade available 

2. High inductance 1000~ µ H 

3. Ferrite SMD Shielded Type 

4. No thermal aging 

## **Applications** 

1. Automotive Systems for Dashboard, CCD Module 

2. Media player 

3. Net working 

4. Lighting, LCD Panel/TV 

## **Product Information** 

|**Series**|**L (mm)**|**W(mm)**|**T (mm)**|**Inductance (**µ**H)**|
|---|---|---|---|---|
|APCF|7.0|7.0|3.2|1 ~ 1500|
||7.0|7.0|4.5||
||10.0|10.0|4.5||
||12.5|12.5|6.5||
||12.5|12.5|7.5||



AEC-Q200 ~~ae~~ **APCF00070745 Series Specification** 

**==> picture [423 x 382] intentionally omitted <==**

**----- Start of picture text -----**<br>
_| 1 Scope: This specification applies to the Pb Free high current type SMD inductors<br>2 Part Numbering:<br>_|<br> A  PCF □□ □□□□□□ □□□ □ □□<br>2 T . Inner Control Code<br>Tolerance  Code<br>Inductance Code<br>Dimensions Code<br>Control Code<br>Product Code<br>Grade Code<br>_| 3 Rating:<br>Operating Temperature range: -55°C ~ +150°C (Including self temp. rise)<br>Storage Temperature range:  -55°C ~ +150°C (For after the circuit board is mounted)<br>Storage Temperature:               -20°C ~ +40°C; 75% RH max. (stored in carrier tape)<br>_| 4 Standard Testing Condition:<br>Unless otherwise specified In case of doubt<br>Temperature Ordinary Temperature(15 to 35 ℃ ) 20 to 30℃<br>Humidity Ordinary Humidity(25 to 85% RH) 50 to 80 %RH<br>**----- End of picture text -----**<br>


**==> picture [185 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
5 Configuration and Dimensions:<br>_|<br>a -oo<br>Net Weight (grms)<br>Net Weight<br>SIZE CODE<br> (grms)<br>070745 0.60 (Typ.)<br>**----- End of picture text -----**<br>


**==> picture [115 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
A:  7.00±0.3   mm<br>B:  7.00±0.3   mm<br>C:  4.50±0.3  mm<br>D:  2.00±0.2   mm<br>E:  4.00Typ.   mm<br>F:  1.50Typ.   mm<br>**----- End of picture text -----**<br>


P-0707-9009-00-(00) 

Page 1/9 

## AEC-Q200 eee **APCF00070745 Series Specification** 

**6 Electrical Characteristics:** 

|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|**Inductance**<br>**Resistance**<br>**L(μH)**<br>**RDC(Ω) ±20%**<br>**Isat(A)**<br>**Irms(A)**<br>**Tolerance**<br>**Marking**<br>**Part No.**<br>**Test Freq.**<br>**Rated DC Current**<br>~~a~~|
|---|---|---|---|---|---|---|---|
|APCF000707451R0□00|1.0|100kHz/0.5V|11m|4.50|4.50|M,T|1R0|
|APCF000707452R2□00|2.2|100kHz/0.5V|15m|3.40|3.30|M,T|2R2|
|APCF000707453R3□00|3.3|100kHz/0.5V|20m|2.50|2.30|M,T|3R3|
|APCF000707454R7□00|4.7|100kHz/0.5V|30m|2.00|2.10|M,T|4R7|
|APCF000707456R8□00|6.8|100kHz/0.5V|39m|1.70|1.74|M,T|6R8|
|APCF00070745100□00|10|100kHz/0.5V|36m|1.30|1.78|M,T|100|
|APCF00070745150□00|15|100kHz/0.5V|52m|1.10|1.53|M,T|150|
|APCF00070745220□00|22|100kHz/0.5V|61m|0.90|1.34|M,T|220|
|APCF00070745330□00|33|100kHz/0.5V|96m|0.82|1.09|M,T|330|
|APCF00070745470□00|47|100kHz/0.5V|0.125|0.75|0.92|M,T|470|
|APCF00070745680□00|68|100kHz/0.5V|0.175|0.60|0.77|M,T|680|
|APCF00070745101□00|100|100kHz/0.5V|0.25|0.50|0.65|K,M|101|
|APCF00070745151□00|150|100kHz/0.5V|0.34|0.40|0.55|K,M|151|
|APCF00070745221□00|220|100kHz/0.5V|0.52|0.33|0.45|K,M|221|
|APCF00070745331□00|330|100kHz/0.5V|0.74|0.25|0.37|K,M|331|
|APCF00070745471□00|470|100kHz/0.5V|1.05|0.22|0.31|K,M|471|
|APCF00070745681□00|680|100kHz/0.5V|1.48|0.20|0.27|K,M|681|
|APCF00070745102□00|1000|100kHz/0.5V|2.28|0.14|0.25|K,M|102|



**NOTE: tolerance   M=** ± **20%** 

1. Isat ： Based on inductance change ( △ L/Lo ： drop 15% Max.) @ambient temperature 25 ℃ 

2. Irms `：` Based on temperature rise (△T `：` 25℃ Typ.) 

3. Rated DC Current `：` The less value which is Isat or Irms. 

Page-2/9 

P-0707-9009-00-(00) 

## AEC-Q200 ~~ee~~ **APCF00070745 Series Specification** 

**==> picture [122 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
6 6.1 Construction:<br>_|<br>**----- End of picture text -----**<br>


## **6.2 Material List:** 

|**NO.**|**ITEM**|**DESCRIPTION & TYPE**|
|---|---|---|
|**1**|**Core**|**Ferrite**|
|**2**|**Wire**|**Magnet Wire (P180)**|
|**3**|**Terminal**|**Terminal Copper**|



Page-3/9 

P-0707-9009-00-(00) 

AEC-Q200 ~~a~~ **APCF00070745 Series Specification** 

|**APCF00070745 Series Specification**<br>~~a~~|**APCF00070745 Series Specification**<br>~~a~~|**APCF00070745 Series Specification**<br>AEC-Q200<br>~~a~~|
|---|---|---|
|ELECTRICAL|||
|**TEST ITEM**|**SPECIFICATION**|**TEST DETAILS**|
|**Insulation**|**There shall be**|**DC 100V voltage shall be applied across this sample of top**|
|**resistance**|**no other**|**surface and the terminal.**|
||**damage or**|**The insulation resistance shall be more than 1 × 108 Ω.**|
||**problems.**||
|**Dielectric**|**There shall be**|**AC 100V voltage shall be applied for 1 minute acrosset the top**|
|**withstand**|**no other**|**surface and the terminal of this sample**|
|**voltage**|**damage or**||
||**problems.**||
|**Temperature**|△**L/L20**℃≦**±10%**|**The test shall be performed after the sample has stabilized in**|
|**characteristics**|**0**～**2000 ppm/**℃|**an ambient temperature of -20 to +85**℃**,and the value**|
|||**calculated based on the value applicable in a normal**|
|||**temperature and narmal humidity shall be**△**L/L20**℃≦**±10%.**|
|MECHANICAL|||
|**TEST ITEM**|**SPECIFICATION**|**TEST DETAILS**|
|**High Temperature**|**1.**△**L/Lo**≦**±10%**|**Refer to MIL-STD-202 Method 108**|
|**Exposure**|**2. Appearance-No**|**1.preconditioning :reflow 3 times.**|
|**(Storage)**|**damage (OM)**|**2.1000hrs. at rated operating temperature, part can be stored for**|
|||**1000 hrs. @ 150°C. Unpowered.**|
|||**Measurement at 24±4 hours after test conclusion.**|
|**Temperature**|**1.**△**L/Lo**≦**±10%**|**Refer to JESD22 Method JA-104**|
|**Cycling**|**2. Appearance-No**|**1.preconditioning :reflow 3 times.**|
||**damage (OM)**|**2.1000 cycles (-55°C to +150°C). Measurement at 24±4 hours after**|
|||**test conclusion. 30min maximum dwell time at each temperature**|
|||**extreme. 1 min. maximum transition time.**|
|**Biased Humidity**|**1.**△**L/Lo**≦**±10%**|**Refer to MIL-STD-202 Method 103**|
||**2. Appearance-No**|**1.preconditioning :reflow 3 times.**|
||**damage (OM)**|**2.1000 hrs 85°C/85%RH.  Unpowered. Measurement at  24±4 hours**|
|||**after test conclusion.**|
|**Operational Life**|**1.**△**L/Lo**≦**±10%**|**Refer to MIL-PRF-27**|
||**2. Appearance-No**|**1.preconditioning :reflow 3 times.**|
||**damage (OM)**|**2.1000 hrs. @150 °C. Measurement  24±4 hours after test**|
|||**conclusion.**|
|**Physical**|**Product spec**|**Refer to JESD22-B100**|
|**Dimensions**||**Verify physical dimensions to the applicable device detail**|
|||**specification.**|



Page-4/9 

P-0707-9009-00-(00) 

AEC-Q200 

## **APCF00070745 Series Specification** 

## MECHANICAL 

|**TEST ITEM**|**SPECIFICATION**|**SPECIFICATION**|
|---|---|---|
|**Resistance to Solvent **|**1. Marking -No constitute**<br>**failure**<br>**2.  No damage or**<br>**degradation that has**<br>**occurred due to solvent**|**Refer to MIL-STD-202 Method 215**<br>**Immersion 3+0.5/-0 minutes in Terpene defluxer.**<br>**Brush 10 strokes (wet bristle) 2 to 3 oz. Rinse in water.**<br>**Air blow dry.**|
|**Mechanical Shock**|1.△**L/Lo**≦**±10%**<br>**2.Appearance-No damage**<br>**(OM)**|**MIL-STD-202 Method 213**<br>**Units are non-operating.**<br>**Pulse shape : Half-sine waveform**<br>**Impact acceleration : 100 g's**<br>**Pulse duration : 6 ms**<br>**Number of shocks : 18  shocks ( 3 shocks for  each face)**|
|**Vibration**|**1.**△**L/Lo**≦**±10%**<br>**2.Appearance-No damage**<br>**(OM)**|**MIL-STD-202 Method 204**<br>**5 g's for 20 minutes, 12 cycles each of 3 orientations.**<br>**Test from 10-2000Hz.**|
|**Resistance to**<br>**Soldering heat**<br>**(reflow soldering)**|**1.**△**L/Lo**≦**±10%**<br>**2. Appearance-No damage**<br>**(OM)**|**Temperature profile of reflow soldering**<br>**Refer to MIL-STD-202 Method 210**<br>**SMD: Condition K, time above 217°C, 60s – 150s, 3Cycles**<br>Temperature<br>Ramp up:<br>Ramp down:<br>3°C/sec. max.<br>6°C/sec. max.<br>~US<br>160°C<br>Soldering<br>260°C +3°C<br>10 - 30sec.<br>25°C<br>€Preheat<br>€ Liquidus<br>Tee<br>150-200°C<br>>217°C<br>60-120 sec.<br>60-150 sec.|
|**Solderability**|**All terminations shall exhibit**<br>**a continuous solder coating**<br>**free from defects for a**<br>**minimum of 95% of the**<br>**critical area of any individual**<br>**termination.**|**Refer to J-STD-002**<br>**For both Leaded & SMD. Electrical Test not required.**<br>**Magnification 30X. Conditions:**<br>**SMD:**<br>**a) Method B1 @ 245°C, 5+0/-0.5 s.**<br>**b) Method D @ 260°C, 30+5/-0 s.**|



Page-5/9 

P-0707-9009-00-(00) 

**APCF00070745 Series Specification** AEC-Q200 

## ENVIRONMENT CHARACTERISTICS 

|**TEST ITEM**|**SPECIFICATION**<br>**TEST DETAILS**|**SPECIFICATION**<br>**TEST DETAILS**|
|---|---|---|
|**Board Flex**|**1.**△**L/Lo**≦**±10%**<br>**2.No Crack**|**Refer to AEC-Q200-005**<br>**Bend the board (D) X =2mm, 60sec minimum holding time.**<br>|<br>-<br>—20<br>ss<br>f<br>“oe<br>-1.6<br>|<br>ee<br>45-45|
|**Terminal**<br>**Strength**|**1.**△**L/Lo**≦**±10%**<br>**2. Appearance-No damage**<br>**(OM)**|**Refer to AEC-Q200-006**<br>**Apply a 1.8Kg force to the side of a device bending tested.**<br>**The force shall be applied for 60+1 seconds.**|
|**Electrical**<br>**Characterization**|**User Specification.**|**Parametrically test per lot and sample size requirements.**<br>**Summary to show minimum, maximum, meanand standard deviation**<br>**at room, minimum andmaximum operating temperatures.**|
|**ESD**||**Refer to AEC-Q200-002 or ISO/DIS 10605**<br>**Refer to attachment third party report**|
|**Flammability**|**The marking and A side have**<br>**no obvious broken, and the**<br>**marking are clearly**|**Refer to UL 94**<br>**Burning stops within 10 seconds on a vertical specimen; drips of**<br>**particles allowed as long as they are not inflamed.**|



Page-6/9 

P-0707-9009-00-(00) 

**APCF00070745 Series Specification** AEC-Q200 

**==> picture [188 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
_| 7 Packaging:<br>7.1 Packaging -Cover Tape<br>**----- End of picture text -----**<br>


## **7.2 Packaging Quantity** 

|TYPE|PCS/REEL|
|---|---|
|APCF00070745|1000|



## **7.3 Reel Dimensions** 

**==> picture [47 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unit : mm<br>**----- End of picture text -----**<br>


Page-7/9 

P-0707-9009-00-(00) 

## AEC-Q200 ~~Ed~~ **APCF00070745 Series Specification** 

- 7 **Packaging:** 

- ~~_I~~ **7.4 Tape Dimensions in mm** 

**==> picture [409 x 82] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unreeling<br>Direction<br>6<br>1<br>**----- End of picture text -----**<br>


**==> picture [190 x 30] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 Recommended Land Pattern:<br>_<br>(STANDARD PATTERN)     Unit : mm<br>**----- End of picture text -----**<br>


Page-8/9 

P-0707-9009-00-(00) 

AEC-Q200 

## **APCF00070745 Series Specification** 

## **9 Note:** ~~_|~~ 

1. Please make sure that your product has been evaluated and confirmed against your specifications when our product is mounted to your product. 

2. Do not knock or drop. 

3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose,under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from  such agreement. 

4. Please keep the distance between transformer/coil and other components (refer to the standard IEC 950) 

5. The moisture sensitivity level (MSL) of products is classified as level 1. 

6. Suggestion 

On customer side this product series need to be fixed by the glue after IR reflow. 

- Please refer to below example photo: Glue 

Page-9/9 

P-0707-9009-00-(00) 

## **APCF00070745 Series Specification** 

TYPICAL ELECTRICAL CHARACTERISTICS 

INDUCTANCE  vs. DC CURRENT INDUCTANCE  vs. FREQUENCY @100KHz/0.1V 

ATTACHMENT-1