APAE1575R1540AZDB2F-T.

**1575.42MHZ; 15x15x4mm GPS Patch Antenna** 

## **APAE1575R1540AZDB2F-T** ee 

## **MSL level: Not Applicable** 

**==> picture [298 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pb  [RoHS]<br>) Compliant 15.0 x 15.0 x 4.0mm<br>This product is RoHS compliant | | | | | | | | | | | | | | |<br>Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)).<br>**----- End of picture text -----**<br>


- High Gain 

- Compact Size and Low Profile 

- Pin type 

Automotive navigation, Marine buoys, Surveying equipment, Cell phone, Laptop, Healthcare and medical monitoring devices, PND, PDA 

- Customization Available 

- RoHS Compliance 

|**Parameters**<br>~~——————aEe~~|**Min.**<br>~~==—e~~<br>~~——————aEe~~|**Typ. **<br>~~=—e~~<br>~~——————aEe~~|**Max.**<br>~~——————aEepo~~|**Units**<br>~~po~~|**Note**<br>~~po~~|
|---|---|---|---|---|---|
|Receiving Frequency Range<br>~~——————aEe~~|1575.42±1.023<br>~~——————aEepo~~|||MHz<br>~~po~~|~~po~~|
|Center Frequency @ -10dB bandwidth(*)<br><br>~~a~~|1577.0±5.0<br>~~po~~<br>~~a~~|||MHz<br>~~po~~|(with tape on the 15mm x 61.5mm<br>groundplane)<br>~~po~~|
|-10dB Bandwidth<br><br>~~a~~<br>~~a~~<br>~~a~~|5.0<br><br>~~a~~<br>~~a~~<br>~~es~~|~~a~~<br>~~a~~<br>~~es~~|~~po~~<br>~~a~~<br>~~a~~|MHz<br>~~po~~|~~po~~|
|Gain (Zenith 90˚)<br>~~a~~<br>~~es~~<br>~~a~~|~~a~~<br>~~es~~<br>~~es~~|1.2<br>~~a~~<br>~~es~~<br>~~es~~|~~a~~<br>~~es~~|dBic<br>~~es~~|(Peak gain on standardized Ground<br>Plane.)<br>~~es~~|
|Return Loss at Center Frequency<br>~~a~~|-15<br>~~es~~|~~es~~||dB||
|VSWR@ center Frequency|||1.5|||
|Polarization Model<br>~~ee~~|RHCP<br>~~ee~~|||~~ee~~|(Right Hand Circular Polarization)<br>~~ee~~|
|Impedance<br>~~ee~~|50<br>~~ee~~|||Ω<br>~~ee~~|~~ee~~|
|FrequencyTemperature Coefficient<br>~~a~~|||20|ppm/°C||



(*) Application environment, including size of ground plane will affect stated performance. Fine tuning might be required when installed on customer’s PCB. 

## **TEST CONDITIONS & TEST SETUP:** SS 

## **RADIATION PATTERN** ~~=~~ _ 

Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) 

**==> picture [104 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
GROUND<br>PLANE<br>SMA<br>**----- End of picture text -----**<br>


> Visit www.abracon.com for Terms & Conditions of Sale **Revised 01.31.14** 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 

**ABRACON IS** ISO9001:2008 || **CERTIFIED** CERTIFIED 

15.0 x 15.0 x 4.0mm This product is RoHS compliant | | | | | | | | | | | | | | | Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)). 

## **1575.42MHZ; 15x15x4mm GPS Patch Antenna** 

## **APAE1575R1540AZDB2F-T** 

## Pb **[RoHS] Compliant** 

## zag **IMPEDANCE CHARACTERISTICS** ——_ 

## MO **OUTLINE DRAWING:** 

**Dimension: mm** 

> Visit www.abracon.com for Terms & Conditions of Sale **Revised 01.31.14** 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 

**ABRACON IS** ISO9001:2008 **CERTIFIED** CERTIFIED 

**1575.42MHZ; 15x15x4mm GPS Patch Antenna APAE1575R1540AZDB2F-T** a) 

Pb **[RoHS]** ) **Compliant** 15.0 x 15.0 x 4.0mm | | | | | | | | | | | | | | | 

This product is RoHS compliant Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)). 

## eS **PACKAGING:** 

“T” is for a vacuum sealed tray containing 50 units. 1000 pieces is the suggested quantity containing 20-trays with 50-pcs per Tray. NOTE: This product is vacuum packaged to reduce the possibility of oxidation and/or contamination during storage. 

**==> picture [410 x 162] intentionally omitted <==**

**----- Start of picture text -----**<br>
8 NO.  Name<br>5 3,6 1  Inner  Box<br>2  Package<br>1<br>7 3  Vacuum Bag<br>4<br>4  Certificate of approval<br>5  Label<br>6  Cushion<br>7  Tray<br>2 8  Adhesive tape<br>Inner Box dimensions (unit: mm)<br>**----- End of picture text -----**<br>


## **CAUTION:** 

(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. 

(2) Do not expose the component to open flame. 

(3) This specification applies to the functionality of the component as a single unit. Please insure the component is thoroughly evaluated in the application circuit. 

## **NOTE:** 

1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. 

2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. 

3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. 

4) When changing your production process, please notify ABRACON immediately. 

5) ABRACON Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. ABRACON’s products are not    specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any    application requiring high reliability where component failure could result in loss of life and/or property.    For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from ABRACON Corporation is required. Please contact ABRACON Corporation for more information. 

6) All specifications and Marking will be subject to change without notice. 

**ATTENTION:** Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.  Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. 

> Visit www.abracon.com for Terms & Conditions of Sale **Revised 01.31.14** 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com 

**ABRACON IS** ISO9001:2008 **CERTIFIED** CERTIFIED