ANT-GPSC-SMA

- 

- 

- 

- 

- 

- 

- 

- 

- 

- 

- 

- 

- 

   - 

   - 

- 

## ANT-GPSC 

**==> picture [50 x 47] intentionally omitted <==**

**----- Start of picture text -----**<br>
¢<br>entWS<br>**----- End of picture text -----**<br>


## Mechanical Detail 

## ANT-GPSMG 

**==> picture [104 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
[00 [2620.10<br>**----- End of picture text -----**<br>


**==> picture [446 x 212] intentionally omitted <==**

**----- Start of picture text -----**<br>
SR : A-4002<br>=| a MATERIAL : 40P<br>qi<br>ne —_poet |<br>™ y,<br>10 1.60<br>5000+50<br>Ca<br>NOL DESCRIPTION | “wnreRIAL [FNS TOY fon | Ape eensxes0.2 [vor _Bpas ||soaet:t © || wedTITLE wo | SMA M+174U+10D<br>**----- End of picture text -----**<br>


ANT-GPSMG-MMCX 

MMCX(M) STRAIGHT 

**==> picture [341 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
°<br>RG174 (mm) ae | J<br>OOD 0<br>8.2+0 60<br>|<br>**----- End of picture text -----**<br>


DS ANT-GPSC-1 

www.rfsolutions.co.uk 

## ANT-GPSC 

**==> picture [46 x 38] intentionally omitted <==**

**----- Start of picture text -----**<br>
aX<br>**----- End of picture text -----**<br>


## Test Data 

## GENERAL 

ENVIRONMENTAL CONDITIONS 

OPERATING TEMPERATURE -30°C TO +60°C STORAGE TEMPERATURE ~~ -40°C TO +90°C (110°C MAX 1HR.) RELATIVE HUMIDITY 20% TO 95%, rain 

ELECTRICAL SPECIFICATIONS INPUT VOLTAGE Require: 3.0 to 5.0 VDC POWER CONSUMPTION 10~25 mA OUTPUT CONNECTOR SMA male Coax Cable RG174U VSWR <2.00 Max Gain >-4dBic @ -90deg<0<+90deg (over 75% Vol) 

MECHANICAL SPECIFICATIONS MOUNTING Magnetic Mount PULLING FORCE OF MAGNET 29N WATER PROOF Waterproof IP67 MAGNET MOUNT Withstand speed of upto 180Km/h. CABLE PULLING FORCE AON BENDING TEST 1” radius After bending test 90 degree right and left 1,000 cycles, no permanent damage found. 

LNA Gain (without Cable) FREQUENCY RANGE 1,575.42 +11 MHz GAIN 28dB (+30°C) 

NOISE FIGURE 1.8 dB MAX. (+30°C) OUT OF BAND REJECTION — fo =1,575.42 MHz fo + 2OMHz 7dB MIN. fo + SOMHz 20dB MIN. fo + 1OOMHz 30dB MIN. OUTPUT IMPEDANCE 50ohm Other Specifications ESD ANTENNA SURFACE 5KV WEEE & Rohs compliant Yes 

eeee DS ANT-GPSC-1 www.rfsolutions.co.uk 

## ANT-GPSC 

**==> picture [88 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
aXS<br>—o%S<br>**----- End of picture text -----**<br>


## RF Solutions Ltd. Recycling Notice Meets the following EC Directives: 

DO NOT Discard with normal waste, please recycle. 

## ROHS Directive 2002/95/EC 

Specifies certain limits for hazardous substances. 

## WEEE Directive 2002/96/EC 

Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd., fulfills its WEEE obligations by membership of an approved compliance scheme. 

Disclaimer: 

Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness. No express or implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make changes and improvements to the product(s) described herein without notice. Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requirements or specification(s) RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user's own determination of how to deploy or use R F Solutions Ltd's products. Use of RF Solutions Ltd products or components in life support and/or safety applications is not authorised except with express written approval. No licences are created, implicitly or otherwise, under any of RF Solutions Ltd's intellectual property rights. Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of the product (including liability resulting from negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict RF Solutions Ltd's liability for death or personal injury resulting from its negligence 

**==> picture [80 x 28] intentionally omitted <==**

**----- Start of picture text -----**<br>
www.rfsolutions.co.uk<br>**----- End of picture text -----**<br>


RF Solutions Ltd William Alexander House, William Way, Burgess Hill, WestSussex, RH159AG Salés; +44(01444 227 910 Tech Support: +44(0)1444 227909 

**==> picture [60 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
fei sdy<br>axG<br>&<br>“aX<br>**----- End of picture text -----**<br>