AME20-5SBJZ

Click on Series name for product info on aimtec.com 

## **- Series AME20 BJZ** 

## **20 Watt | AC-DC / DC-DC Converter** 

## **FEATURES:** 

- Input: 90-528VAC, 47-63Hz, or 100-745VDC 

- Operating Temp: -40°C to +70°C 

- Over current Protection 

- I/O Isolation of 4000VAC 

- Class II power supply 

- Over Voltage Protection 

- Up to 83% efficiency 

- Short Circuit Protection 

## **Models Single output** 

|**Model**|**Input**<br>**Voltage**<br>**(VAC/Hz)**|**Input**<br>**Voltage**<br>**(VDC)**|**Max**<br>**Output**<br>**wattage**<br>**(W)**|**Output**<br>**Voltage**<br>**(V)**|**Output**<br>**Current max**<br>**(A)**|**Maximum**<br>**capacitive load**<br>**(µF)**|**Efficiency**<br>**(%)**|
|---|---|---|---|---|---|---|---|
||||||||**230**<br>**VAC**|
|AME20-3.3SBJZ|90-528/47-63|100-745|11.88|3.3|3.6|10,000|74|
|AME20-5SBJZ|90-528/47-63|100-745|18|5|3.6|10,000|78|
|AME20-9SBJZ|90-528/47-63|100-745|20|9|2.23|7,000|79|
|AME20-12SBJZ**#**|90-528/47-63|100-745|20|12|1.66|5,000|82|
|AME20-15SBJZ|90-528/47-63|100-745|20|15|1.33|3,000|83|
|AME20-24SBJZ**#**|90-528/47-63|100-745|20|24|0.833|1,000|83|



## **Input Specifications** 

|**Parameters**|**Conditions**|**Typical **|**Maximum **|**Units**|
|---|---|---|---|---|
|Current (full load)|115 VAC||800|mA|
||230 VAC||400|mA|
|Inrush current <2ms (cold start)|115 VAC|35||A|
||230 VAC|60||A|
|Leakage current|230VAC/50Hz||0.25|mA|
|External fuse|Recommended slowblowtype|3.15||A|
|No load consumption|||0.75|W|



## **Output Specifications** 

|**Parameters**|**Conditions**|**Typical**|**Maximum**|**Units**|
|---|---|---|---|---|
|Voltage accuracy||±2.0|±3.0|%|
|Lineregulation|(LL-HL)|±0.5||%|
|Load regulation|0-100%load|±1.0||%|
|Ripple &Noise*|20MHzbandwidth||150|mVp-p|
|Hold up time|230VAC|35||ms|



*Tested as per the referenced Application Circuit. 

## **Isolation Specifications** 

|**Parameters**|**Conditions**|**Typical**|**Rated**|**Units**|
|---|---|---|---|---|
|TestedI/Ovoltage|Input to Output, 60 sec||4000|VAC|
|Isolation resistance||>1000||MΩ|



## **General Specifications** 

||**Parameters**|**Conditions**|**Typical**|**Maximum**|**Units**||
|---|---|---|---|---|---|---|
||Switchingfrequency||65||KHz||
||Over current protection|130-400|||% of Iout||
||Over voltageprotection|Zener Diode Clamp|||||
||Short circuit protection|Continuous,Hiccup,Autorecovery|||||
||Operating temperature|See derating curve|-40 to+70||°C||
||Maximum case temperature|||100|°C||
||Storage temperature||-40 to+85||°C||
||Temperature coefficient||±0.02||% / °C||
||Cooling|Free air convection|||||
||Humidity|Non condensing||95|% RH||



www.aimtec.com F 052e R8.B 

Tel: +1 514 620 2722 

Toll free: + 1 888 9 AIMTEC (924 6832) 

REV: 07/20/A 

1 of 4 

North America only 

|||**Series AME20-BJZ **|**Series AME20-BJZ **|
|---|---|---|---|
|Your Power Partner|**20 Watt| AC-DC / DC-DC Converter**|||
|Case material|Plastic (flammability to UL 94V-0)|||
|Weight|160||g|
|Dimensions**(L x W x H)**|70.00 x 48.00 x 30.0 mm (2.76 x 1.89 x 1.18 inches)|||
|MTBF|> 300 000 hrs(MIL-HDBK -217F,t=+25oC)/ Full Load|||



NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage (115/230VAC) and at rated output load unless otherwise specified. 

## **Safety Specifications** 

|**Safety Specifications**<br>**Parameters**|**Safety Specifications**<br>**Parameters**|**Safety Specifications**<br>**Parameters**|
|---|---|---|
|Agencyapprovals|UL 62368-1(Onlyfor the models marked**#**)||
|Standards|Information Technology Equipment|Designed to meet IEC/EN/UL 62368-1|
||EMI-Conducted and radiated emission|EN55032, class B|
||ElectrostaticDischargeImmunity|IEC 61000-4-2:Contact±6KV/Air ±8KV, CriteriaB|
||RF,Electromagnetic Field Immunity|IEC 61000-4-3: 10V/m,Criteria A|
||Electrical Fast Transient/Burst Immunity|IEC 61000-4-4: ±2KV, applying recommended EMC circuit for ±4KV,<br>Criteria B|
||Surge Immunity*|IEC 61000-4-5: line to line: ±2KV, applying recommended EMC<br>circuitfor line toline: ±4KV, CriteriaB|
||RF,Conducted Disturbance Immunity|IEC 61000-4-6: 10Vrms,Criteria A|
||Voltage dips, Short Interruptions Immunity|IEC 61000-4-11: 0-70%, Criteria B|



* For higher values, external circuit would be required. 

## **Typical Application circuit** 

**==> picture [526 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
Single Output<br>FUSE<br>3.15A/300V<br>AC L AC L + Vout + Vout<br>MOV TVS<br>+<br>S20K625 AC DC<br>C1    C2<br>AC N AC N 1µF/50V<br>- Vout - Vout<br>**----- End of picture text -----**<br>


|**Vout**|**C2**|**TVS**|
|---|---|---|
|3.3 & 5V|330 µF/50V|7A|
|9V|220 µF/50V|12A|
|12V||20A|
|15 &24V||30A|



Toll free: + 1 888 9 AIMTEC (924 6832) 

Tel: +1 514 620 2722 

www.aimtec.com F 052e R8.B REV: 07/20/A 

2 of 4 

North America only 

**- Series AME20 BJZ 20 Watt | AC-DC / DC-DC Converter** 

## **3 Phase 4 Wire EMC recommended circuit** 

Full-wave Rectification for 4KV differential mode inrush standard 

**==> picture [536 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>2A/1000V Single Output<br>FUSE R1<br>3.15A/300V 10Ω/5W + Vin<br>A AC L + Vout + Vout<br>FUSE<br>3.15A/300V R2<br>10Ω/5W AC DC + TVS<br>B C1    C2<br>1µF/50V<br>FUSE R3<br>GND<br>3.15A/300V 10Ω/5W AC N - Vout - Vout<br>C<br>AC N<br>MOV MOV MOV<br>S20K510 S20K510 S20K510<br>**----- End of picture text -----**<br>


Half-wave Rectification for 4KV differential mode inrush standard 

**==> picture [537 x 139] intentionally omitted <==**

**----- Start of picture text -----**<br>
FUSE R1 D Single Output<br>3.15A/300V 10Ω/5W 2A/1000V + Vin<br>A AC L + Vout + Vout<br>FUSE<br>3.15A/300V R2 D<br>10Ω/5W 2A/1000V AC DC + TVS<br>B C1    C2<br>1µF/50V<br>FUSE R3 D<br>GND<br>3.15A/300V 10Ω/5W 2A/1000V AC N - Vout - Vout<br>C<br>AC N<br>MOV MOV MOV<br>S20K510 S20K510 S20K510<br>**----- End of picture text -----**<br>


|**Vout**|**C2 **|**TVS**|
|---|---|---|
|3.3 & 5V|330 µF/50V|7A|
|9V<br>12V<br>15 &24V|220 µF/50V|12A|
|||20A|
|||30A|



Toll free: + 1 888 9 AIMTEC (924 6832) 

Tel: +1 514 620 2722 

www.aimtec.com F 052e R8.B REV: 07/20/A 

3 of 4 

North America only 

**- Series AME20 BJZ 20 Watt | AC-DC / DC-DC Converter** 

**==> picture [543 x 476] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Out Specifications                                       Dimensions<br>Po Pin  Single<br>1  NA (No Pin Present)<br>2* AC Input (N) or (L1)  (2.75)70.00<br>3*  AC Input (L) or (L2)<br>3<br>4  + V output<br>5 - V output 4 et 8<br>Th Bottom  SSS ty tt<br>* Note: Input Pins 2 and 3 can be “N” and "L"   2 View 2 Top View<br>respectively when the input voltage is supplied<br>from a single phase.<br>Input Pins 2 and 3 can be “L1” and "L2" respectively  when the input voltage is supplied from 3 phase   {/ }| 1 8 G | toySSSREE 3 | | | | 4 ey<br>line to line voltage 208-480Vac<br>(208 Y/ 120V 3-phase, 240 Y/ 120V 3-phase,   (2.44)62.00 eee DIV: 10.00 (0.40)<br>400 Y/ 230V 3-phase or 480 Y/ 277V 3-phase).<br>+ Ø 1.50 (Ø 0.06)<br>Dimensions mm (inch)<br>Case Tolerance ±0.50 (±0.02)<br>Pin Diameter 1.0 ± 0.10 (0.04 ± 0.004)<br>iL t<br>1.00<br>(0.04) ale F<br>Derating<br>Free Air Convection Free Air Convection at 25°C<br>100 100<br>p pt tt pep e<br>80 80<br>ALT A tt | | dl<br>70<br>60 Safe Operating Area 60 Safe Operating Area<br>55 Cope OL ZC N<br>40 40<br>aver || AGaEeie<br>20<br>20<br>pty to ei tt tt<br>0<br>0<br>90 110 480 528<br>- 40 ptt - 20-10 0 tTET 20  Pe 40 55 60 70 80 100 (100) pt (155)  ttEE ttTe (675) (745)<br>Input Voltage VAC (VDC)<br>Ambient Temperature  º C<br>48.00 (1.89) 40.00 (1.57) 23.00 (0.90)<br>30.00 (1.18)<br>6.00 (0.24)<br>Output Power (%) Output Power (%)<br>**----- End of picture text -----**<br>


**NOTE: 1.** Datasheets are updated as needed and as such, specifications are subject to change without notice.  Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. **2.** Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. **3.** Mechanical drawings and specifications are for reference only. **4.** All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. **5.** Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. **6.** This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. **7.** Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. 

Toll free: + 1 888 9 AIMTEC (924 6832) 

Tel: +1 514 620 2722 

www.aimtec.com F 052e R8.B REV: 07/20/A 

4 of 4 

North America only