ALE1502D

**MODULAR SYMMETRICAL & REGULATED POWER SUPPLY** 

> **+ 15 V or 12 V or 24 V ALE1502D** 

## **EAN CODE :3760244880239** 

**PRECISE :** Switching power supply offering a ripple < 3 mV rms. - Output voltage adjustable from ±10 to ±15 V **SMALL :** Modular, **EASY:** direct DIN rail or panel mounting **PROTECTED :** against short circuits and reverse polarity. **RESISTANT TO SHOCK** 

## 60 WATTS 

±10 to 15 V 2 A or 12V 5 A or 24V 2 A 

**==> picture [26 x 23] intentionally omitted <==**

**----- Start of picture text -----**<br>
al<br>**----- End of picture text -----**<br>


## **Specifications** 

- Floating outputs on spring terminal block with levers for 2,5 mm² (AWG 12) wires. 

- Balanced-output voltage adjustable from ±10 to ±15 V **+15 V output** 

- Regulation : <  20 mV for a load variation from 0 to 100%. 

   - <  2 mV for a line variation from -10 to +10%. 

- Ripple : < 3 mV rms including : < 3 mV peak to peak of the signal at 100 kHz < 5 mV peak to peak of the signal at 100 Hz < 12 mV peak to peak of switching spikes 

## **-15 V output** 

- Regulation  : <  20 mV for a load variation from 0 to 100%. <  2 mV for a line variation from -10 to +10%. 

- • Ripple : < 3 mV rms including : < 4 mV peak to peak of the signal at 330 kHz < 4 mV peak to peak of the signal at 100 Hz < 15 mV peak to peak of switching spikes 

- **24V Output (Adjustable from  20 to 30V)** Available between output  +  and  - 

- •Regulation : < 35 mV for a load variation from 0 to 100% < 10 mV for a line variation from -10 to +10%. 

- •Ondulation : < 3 mV rms including: < 8 mV peak to peak of the switching signal < 5 mV peak to peak of the signal at 100 Hz < 15 mV peak to peak of switching spikes. 

## **Indicators** 

- Green power-on LED indicator. 

- Overheat or overcurrent red LED "status" indicator 

- **Current +15 V (alone)** • I max : 5,5 A in short circuit condition 5 A from 10 to 12 V ; 4 A at 15 V 

**Current -15 V (alone)** 

- I max : 2,1 A in short-circuit condition 

   - 2 A from 10 to 15 V 

**Current 24V (Adjustable from  20 to 30 V)** I max : 2,1 A in short-circuit condition 2 A from 20 to 30 V 

**Power** 

- Max output power : 60 W. 

- I max ±15 V : 2 A 

**Protections** 

- Against short-circuits by current limit. 

- Against overcurrent on primary circuit by fuse. 

- Against overtemperature, by thermal shutdown. 

- Cover on input output terminal block. 

## **Other specifications** 

- Safety : Class II, Safety Extra Low Voltage (SELV), complies with EN 61010-1, EN 61010-2-201 and EN61368-1. 

- • EMC : Complies with EN 61000-6-2 and EN 61000-6-4. • Overvoltage Category : II ; Pollution Degree : 2. • Installation altitude   : < 2000 m. • Protection level : IP 30. • Operating temperature : from -25 to +60 °C ; derating : 1 W/°C from +40 °C • Input voltage : 190 to 264 Volts, 50-60 Hz. • Mains input : spring terminal block with levers for 2,5 mm², (AWG 12)  wires. • Power consumption : 78 W max. • Dielectric strength :  3000 VAC from input to output. • Presentation : modular polycarbonate case (6 x 17.5 mm) screenprinted. • Mounting : Clips package integrated in modular case for DIN rails profile 35x7,5 mm or 35x15 mm. Removable wall mouting integrated to the case for 4 mm screws. 

**53 | www.elc.fr**