ALE1210.

AC/DC DIN Rail Power Supply (PSU), ITE, 1 Output, 120 W, 12 VDC, 10 A

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: ELC
Product type:
No. of Outputs:1 Output; Output Power Max:120W; Output Voltage - Output 1:12VDC; Output Current - Output 1:10A; Output Voltage - Output 2:-; Output Current - Output 2:-; Output Volta
Product Range: -
No. of Outputs: 1 Output
Output Power Max: 120W
Current, Output 4: -
Input Voltage VAC: 190V AC to 253V AC
Input Voltage AC Max: 253VAC
Input Voltage AC Min: 190VAC
Power Supply Output Type: Adjustable
Output Current - Output 1: 10A
Output Current - Output 2: -
Output Current - Output 3: -
Output Voltage - Output 1: 12VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Output Voltage - Output 4: -
Power Supply Applications: ITE

Delivery and price
Units per pack	10
Price	177.83 €
Current stock	10+
Lead time	30 days

Datasheet

**OEM REGULATED POWER SUPPLY** 

**ALE1210** 

**12 V + ACTIVE PFC** 

## **EAN CODE : 3760244880260** 

**PRECISE :** Output ripple < 3 mV rms. **COMPLIE :** EN 61000-3-2 Built in actif power corrector (PFC). **PRACTICAL :** Output voltage adjustable from 10 to 15 V. **PROTECTED :** Short circuit protection. **EASY :** Direct DIN rail mounting. - Dual spring terminal block. 

## 120 WATTS 

12 V (Ad **j. 10 to 15 V)** 10 A 

## **Specifications** 

## **Voltage** 

- Floating outputs on dual spring terminal block for 2.5mm² (AWG 12) wire 

## **Other specifications** 

- Output voltage : adjustable from 10 to 15 V. 

- Regulation : < 25 mV for a load variation from 0 to 100%. 

   - < 1 mV for a line variation from -10 to +10%. 

- Ripple : < 3 mV rms including: 

   - < 5 mV peak to peak of the signal at 100 kHz 

   - < 5 mV peak to peak of the signal at 100 Hz < 35 mV peak to peak of switching spikes 

- Hold-up time  : 25 ms at half load and 12 ms at full load (190 V line input). 

- Indicator : green power-on LED indicator. 

   - "status, output fault" red LED. 

- Safety   :  Complies with EN 61010-1, EN61010-2-201 and EN 62368-1. 

- EMC   : Complies with EN 61000-6-2 and EN 61000-6-4. 

- Insulation Class         : I 

- Overvoltage Category   : II 

- Pollution Degree       : 2 

- Installation altitude     : < 2000 m 

- Protection level            : IP 30 

- Operating temperature : from -10 to +60 °C ; derating : 2.5 %/K from +45 °C 

- Input voltage  : 190 to 264 Volts, 50-60 Hz. 

- Mains input   : Dual spring terminal block for 2.5 mm² (AWG 12) wire. 

## **Current** 

- Max I : 10,5 A in short circuit condition. 10 A from 10 to 15 V 

- Power consumption : 175 W max. 

- Power factor        : 0,99 (built with PFC). 

- Dielectric strength : 3000 VAC. 

   - 1800 VAC from input to chassis. 

## **Power** 

- Max output power : 150 W. 

- Presentation  : galvanized steel case and front panel with epoxy finish. 

- Mounting   : Integral symmetrical DIN rail clips. 

## **Protection** 

- Short circuit protection, by current limit. 

- Against overcurrent on main input, by fuse. 

- Output overload protection by voltage limiting to 17 V. 

**59 | www.elc.fr**

Updated at June 4, 2026

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →