ALE1202

**OEM MODULAR & REGULATED POWER SUPPLY** 

**12 V REMOTE SENSING** 

## **EAN CODE : 3760244880246** 

## **ALE1202** 

**==> picture [54 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Panel mounting<br>**----- End of picture text -----**<br>


**PRECISE :** Output ripple < 3 mV rms. - Remote sensing to overcome voltage drop in the power lines. **PRACTICAL :** Output voltage adjustable from 10 to 15 V. - Spring terminal block. **PROTECTED :** Short circuit protection. **EASY :** Direct DIN rail or panel mounting. 

## 30 WATTS 

12 V (A **dj. 10 to 15 V)** 2,5 A 

## **Specifications** 

## **Voltage** 

- Floating outputs on spring terminal block for 2,5 mm2 (AWG12) wires 

- Output voltage : adujustable from 10 to 15 V. 

   - : <25 mV for a load variation from 0 to 100% 

- Regulation 

   - 5 mV for a line variation from -10 to +10% 

- Ripple : < 3 mV rms including : 

- 3 mV peak to peak of the signal at 65 kHz < 4 mV peak to peak of the signal at 100 Hz < 35 mV peak to peak of switching spikes 

- • Hold-up time : 50 ms at full load (230 V line input) • Indicator : green power-on LED indicator 

**Current** 

- Max I : 3 A at 10 V 

   - 2,5 A at 12 V 2 A at 15 V 

## **Power** 

- Max output power : 30 W 

## **Protections** 

## **Other specifications** 

- Safety : Class II, Safety Extra Low Voltage (SELV), complies with EN 61010-1, EN 61010-2-201 and EN 61368-1. 

- EMC : Complies with EN 61000-6-2 and EN 61000-6-4. 

- Overvoltage Category : II ; Pollution Degree : 2. 

- Installation altitude   : < 2000 m. 

   - : IP30 

- Protection level 

- Operating temperature : from -25 °C to +70 °C Derating : 1 W/°C from. +55 °C 

- • Input voltage : 190 to 264 V, 50-60 Hz 

- Input voltage 

   - : disconnect scribe terminal blocks for 2,5 mm² wires (AWG12) 

- Mains input 

- Power consumption  : max 35 W 

- Dielectric strength  : 3000 VAC from input to output 

   - : polycarbonate modular case (3 modules) screenprinted : 54 x 95 x 58 mm (lxhxp) 

- Presentation 

- Dimension 

      - : Clipspackage integrated in modular case for DIN rail profile 35x7,5 mm or 35x15 mm removable wall mounting integrated case to 

      - ran the 4 mm screws. 

   - Mounting 

- Against short-circuits by circuit breaker with automatic reset 

- Against transients on the primary circuit by varistor 

- Against overcurrent on primary circuit by fuse 

## **Remote sensing** 

- Correction of the voltage drop in the wires (4 wires method) 

- Input on disconnect scribe terminal blocks for 2,5 mm2 wires (AWG12) 

- Correction : Max 3 V (1,5 V per wire) 

- Ripple : < 30 mV for a load variation from 0 to max. 

**55 | www.elc.fr**