AK 200 C10

## **AC Current transducer AK-C-** 

## **I =  10 .. 200 A PN** 

Transducer for the electronic measurement of  AC sinusoidal waveforms, with galvanic isolation between the primary (High power) and the secondary circuits (Electronic circuit). Jumper selectable ranges and self powered transducers. 

## **Electrical data** ~~C~~ T 

Primary Nominal Current Analogue Output Signal[1)] Type RoHS Date code IPN (A.t.RMS) VOUT (V DC) 10,20,50 5 **AK 50 C5** planned 10,20,50 10 **AK 50 C10** MAY 2006 100,150,200 5 **AK 200 C5** planned 100,150,200 10 **AK 200 C10** JUNE 2006 Vc Supply voltage Self Powered RL Load resistance 1 MΩ Vb Rated voltage (CAT III, PD2) 150 V AC Vd RMS Isolation voltage test, 50 Hz, 1mn 3 kV AC f Frequency bandwith 50-60 Hz 

## **Features** 

- AC sinusoïdal measurement 

- Average responding 

- Self powered transducers 

- Panel mounting 

- Voltage output 

- Jumper selectable ranges 

## **Advantages** 

- Large aperture 

- High isolation between primary and secondary circuits 

## PT **Accuracy - Dynamic performance data** 

X Accuracy @ IPN, TA=25°C ± 1 % tr Response time @ 90% of IPN < 100 mS **General data** PT TA Ambient operating temperature (0-95% RH) - 20 ..+ 50 °C TS Ambient storage temperature - 20 ..+ 85 °C m Mass 120 g Safety IEC 61010-1 EMC EN 61326 

## **General data** PT 

Note : 1) For 0-5 V output model, no saturation output up to 8.2 V and for 0-10 V output model, no saturation output up to 15 V. 

- Easy to mount 

## **Applications** 

- Automation systems Analog current reading for remote monitoring (e.g. motor). 

- Data loggers Self-powered transducer does not drain data logger batteries. 

- Panel meters Simple connection displays power consumption. 

## **Options on request** 

- DIN mounting 

060816/6 Page 1/2 

LEM  reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice. 

LEM 

www.lem.com 

## **Dimensions AK-C-** (unit : mm,  1mm = 0.0394 inch) 

**==> picture [470 x 415] intentionally omitted <==**

**----- Start of picture text -----**<br>
61.0<br>19<br>w ii | P p<br>23.5 23.7<br>88.9<br>4.5<br>| { !<br>rn es 39 |<br>|<br>78 |<br>a<br>Mechanical characteristics Remark<br>• General tolerance ± 1 mm • Temperature of the primary conductor should not<br>• Primary aperture 19 mm    exceed 60°C.<br>• Panel mounting 2 holes ∅ 4.5mm<br>   Distance between holes 78 mm<br>55.4<br>49<br>24.5<br>3.2<br>5<br>1<br>**----- End of picture text -----**<br>


## **Connections** 

- 2 x UNC8 Cylindric Head 

060816/6 

Page  2/2 

LEM  reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice. 

LEM 

www.lem.com