AIF13WAC-01N

## **ARTESYN AIF13WAC-01NT MODEL** 

## 600 W ACDC Converter 

Advanced Energy's Artesyn AIF13WAC-01NT model of wide range AC input, high efficiency and standard form factor full brick is an enormously flexible product with an extensive feature set. The low-profile unit which is designed specifically for contact-cooled designs is ideally suited to many different applications. Although it has been designed very much with remote-radio-head RF power supply requirements in mind for 5G telecommunication applications, they are equally at home in industrial applications. The unit features an internal inrush limiting function that is matched to the hold-up function of the module which makes designing applications much easier for the user. 

## **SPECIAL FEATURES** 

## **SAFETY** 

   - EN, UL/cUL/IEC/EN 62368-1 safety approved 

- Fully encapsulated, baseplate cooled full brick 

- Wide AC input range 

- CE mark 

## **AT A GLANCE** 

## **Total Power** 

## **600 W** 

## **Input voltage** 

## **100 to 240 VAC** 

**# of outputs** 

**Single O/P** 

- Fully regulated output 

- High efficiency - up to 93% 

- I/O isolation of 4000 VDC 

- Ambient temperature range of -40 to +85°C 

- Protection features: UVLO, OVP, OCP 

- No minimum load requirement 

- Remote enable 

## **WARRANTY** 

- 2 Years (Consult factory for extended terms) 

- Notes: HVDC output cannot be connected for parallel application 

## **PATENT** 

- Power-Good status 

- Active current share 

- PMBus communication 

- Auxiliary output 

- Internal inrush limiter 

©2025 Advanced Energy Industries, Inc. 

**AIF13WAC-01NT** 

## **ELECTRICAL SPECIFICATIONS** 

**==> picture [479 x 358] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>Input Range (AC nominal) 100 to 240 VAC<br>Input Surge (100 ms) 300 VAC<br>Input Frequency 50/60 Hz<br>Total Harmonic Distortion Less than 10%<br>Power Factor 0.99 typ (> 300 W)<br>Standby Input Power  5 W (PSU enable off)<br>Output<br>Output Voltage Set-point  48 VDC<br>Output Current  12.8 A<br>Output Voltage Adjust Range -8.3% to +17.9% Vout,  (44 to 56.6 VDC)<br>HVDC Output  395 VDC (450 VDC capacitor) at 48 VDC<br>Ripple/noise 480 mV pk-pk<br>Start-up Time  3.5 second<br>Line Regulation +/- 0.2% Vout<br>Load Regulation +/- 4% Vout<br>Aux O/P 8 to 11 VDC (250 mA)<br>Minimum Load  No minimum load requirement<br>Control and Protection<br>Current Share Accuracy Better than 10% rated Iout<br>Overvoltage Protection  127.5% Vout (latched protection)<br>Over Load Protection 106% to 125% rated Iout<br>Constant current with voltage droop 6.02 V/A when exceeds 14.08 A or 676 W +/- 12 W, then hiccup when<br>Over Load Protection Type<br>current exceeds 15.36 A<br>PSU-Good Status signal<br>PSU Enable TTL compatible<br>Digital Control  PMBus protocol<br>**----- End of picture text -----**<br>


## **ORDERING INFORMATION TABLE** 

**==> picture [479 x 72] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Nominal Input voltage Output Maximum Power<br>AIF13WAC-01NT 100 to 240 VAC 48 VDC at 12.8 A 600 W<br>AIF XX X AC -01 X X<br>Brick Size Output Current Output Voltage Input Voltage Enable Logic Mounting Type<br>AIF: full brick 13: 12.8 A W: 48 VDC AC: AC input N: negative enable T: non-thread insert<br>**----- End of picture text -----**<br>


## **ENVIRONMENTAL SPECIFICATIONS** 

**==> picture [479 x 50] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operating Temperature -40 to +85°C, 100°C baseplate<br>Storage Temperature -40 to +105°C<br>Humidity (non-condensing) 95% rel. Humidity<br>Calculated MTBF >1Mil Hrs Telcordia<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**AIF13WAC-01NT** 

## **MECHANICAL DRAWING** 

**==> picture [264 x 238] intentionally omitted <==**

**----- Start of picture text -----**<br>
XM 116.8 A<br>11 1<br>A<br>C)<br>ieaee e e<br>00 0<br>106.68 (2X)<br>6.20 46.60<br>0.5 0 0.05<br>SQ PIN (12X) \ @ 2.06 + 0.05<br>— I/O PIN (6X) i o ” CD |<br>\ \<br>|) 2.00 TYP. o 0 Ww<br>D C<br>7 33 6 B c o<br>1<br>3 0.80 >)<br>| ° E1 A U<br>F1<br>Sn<br>| 106.00 (2X) ° 1.00 (2X) U<br>12.7 +1.2 / -0.5<br>4.7 (6X)<br>4.01<br>5.10<br>2.00 TYP.<br>39.40 (2X) 26.00 50.80 (2X)<br>31.00 (2X)<br>6.00 11.10 10.80<br>**----- End of picture text -----**<br>


Note: 

1. PARTS MUST BE COMPLETELY ASSEMBLED. 

2. LISTED PART NUMBERS ARE GIVEN FOR REFERENCE ONLY. REFER TO BOM FOR UPDATED PART NUMBERS. 

3. DIMENSIONS MARKED WITH OBROUND NEED TO BE INSPECTED. 

3. FOR BARCODE LABEL PRINTING DETAILS, REFER TO LBLD1. 

4. SURFACE FLATNESS : 

CONCAVE INWARDS : 0.2 MM MAX. 

CONVEX OUTWARDS : 0.38 MM MAX. 

5.  UNLESS OTHERWISE SPECIFIED TOLERANCE AS BELOW WHOLE NO         ANGLE ±1 ±0.5 DECIMAL .X     ±0.5 .XX  ±0.25 

## **PHYSICAL CHARACTERISTICS** 

**==> picture [329 x 74] intentionally omitted <==**

**----- Start of picture text -----**<br>
Isolation Voltage<br>                                                                                            Input to output 4000 VDC<br>                                                                                       Input to baseplate 2500 VDC<br>                                                                                    Output to baseplate 100 VDC<br>Weight 260 g typ.<br>Size 4.6” x 2.4” x 0.55”<br>(116.84 x 60.96 x 13.95 mm)<br>**----- End of picture text -----**<br>


**advancedenergy.com       3** 

**AIF13WAC-01NT** 

## **PIN ASSIGNMENTS** 

**==> picture [479 x 259] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Number Signal Name<br>1 SENSE +VE<br>2 SDA<br>3 SCL<br>4 I2C ADDRESS<br>5 SYNC START<br>6 SIGNAL GND<br>7 AUX O/P<br>8 PSU-GOOD (STATUS)<br>9 C-SHARE<br>10 PSU ENABLE<br>11 O/P V-ADJ<br>12 SENSE -VE<br>A AC-IN L1<br>B AC-IN L2<br>C HVDC -VE<br>D HVDC +VE<br>E1 O/P -VE<br>F1 O/P +VE<br>**----- End of picture text -----**<br>


**advancedenergy.com       4** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than four decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

## **TRUST** 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2025 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-AIF13WAC-01NT-05.26.2025