AIF06ZPFC-01L

## **ARTESYN AIF06ZPFC SERIES** 

2400 Watt Full Brick PFC Converter 

The AIF06ZPFC series full-brick power factor correction module accepts a wide 85–264 Vac input and presents a unity power factor. Rated at 2400 watts, the module has a high conversion efficiency of 97.3% and provides a nominal non-isolated output voltage of 400 Vdc. Featuring an industry-standard 2.4 x 4.6 full-brick form factor and a height of only 0.55 inch, they have a power density of 395 watts per cubic inch. 

## **DATA SHEET** 

## **Total Power:** 

**2400 Watts 230 Vac (400 V @ 6 A) 1400 Watts 115 Vac (400 V @ 3.5 A)** 

## **Input Voltage:** 

**85 - 264 Vac** 

## **SPECIAL FEATURES** 

- 2400 W continuous power high-line 

- 1400 W continuous power low-line 

- Ultra high efficiency; 97% 

- 85-264 Vac input range 

- Baseplate optimized for contact cooling or heatsink mounting 

- Fixed switching frequency 

- Pre-bias startup capability 

- Programmable phase shift angle in parallel application 

- High reliability 

- Internal inrush limit control (01 Version only) 

- No external diodes required for two units sharing (external diodes required for >2) 

- -40 °C startup, -25 °C operation 

- Two-year warranty (consult factory for extended terms) 

## **SAFETY** 

>  CSA C22.2. No.62368-1 

   - CE EN62368-1 

   - UL 62368-1 

- RoHS 6 compliant 

- UL94 V-0 materials 

- PMBus® communication 

- Non-isolated PFC 

## **TYPICAL APPLICATIONS** 

   - Industrial 

   - Medical 

- Feature rich control functions 

- Standard full brick outline 

- Parallel and current share version 

©2020 Advanced Energy Industries, Inc. 

**AIF06** 

**==> picture [479 x 445] intentionally omitted <==**

**----- Start of picture text -----**<br>
TECHNICAL DATA<br>Electrical Specifications<br>Input<br>Input voltage 85 - 264 Vac<br>Input surge 290 Vac / 1s<br>Input frequency 50/60 Hz<br>Efficiency 97% (full load @ 230 Vac)<br>Total harmonic distortion IEC 61000-3-2 for 1 module; IEC 61000-3-12 for 2 or more modules in parallel<br>Power factor 0.99 typical (Po > 1400 W)<br>0.97 typical (Po > 700 W)<br>Output<br>Output voltage 400 V Typ<br>Vin pk must be < Vout -10 V<br>Output voltage load regulation* 2% maximum<br>Max Output power & current Vin < 180 Vac, Pmax = 1400 W Iomax = 3.5 A<br>180 ≤ Vin < 200 Vac, Pmax = 2200 W, Iomax = 5.5 A Vin ≥ 200 Vac, Pmax = 2400 W Iomax = 6 A<br>Overvoltage protection 450 Vdc max<br>Overtemperature protection - baseplate 110 °C max<br>Overcurrent protection method/OCP operation** 4.2 A typ @ Vin = 115 Vac 7.2 A typ @ Vin = 230 Vac<br>Peak surge power 17.5 A for 1 mSec<br>Output capacitanc 2000 µF max per module<br>Aux O/P 11-13 V @ 20 mA<br>Control<br>Tmon (0.5 V @ 25 °C) 10 mV / °C<br>LD enable Drive output via opto-isolator<br>PFC enable TTL compatiable (and CMOS compatible)<br>Voltage adjust* 330 V to 400 V<br>Clock input*** 280 kHz ± 5%<br>Clock output  280 kHz ± 5%<br>Cmon output  0.3 V/A<br>Unit startup time  2 seconds max (01 Version only)<br>**----- End of picture text -----**<br>


* V_ADJ set with 0.1% accuracy resistor 

** OCP latching at 230 Vac; OCP auto-recovery at 115 Vac 

*** CLK_IN signal is 3.3 V logic 

**2 advancedenergy.com** 

**AIF06** 

**==> picture [479 x 147] intentionally omitted <==**

**----- Start of picture text -----**<br>
TECHNICAL DATA (CONTINUED)<br>General Specifications<br>Unit weight 9.4 oz/ 266 g typical and 11.3 oz / 320 g maximum<br>Ambinet temperature - low<br>Startup -40 °C min<br>Operational -25 °C min<br>Maximum operational baseplate temperature 100 °C<br>Storage temperature -40 °C to 110 °C max<br>Operational altitude according to IEC62368-1 4,000 M maximum (pollution degree II, basic insulation, 240 Vrms)<br>**----- End of picture text -----**<br>


## **MECHANICAL DRAWINGS** 

**==> picture [479 x 448] intentionally omitted <==**

**----- Start of picture text -----**<br>
NOTES:<br>1. PARTS MUST BE COMPLETELY ASSEMBLED.<br>2. LISTED PART NUMBERS ARE GIVEN FOR REFERENCE ONLY.<br>REFER TO BOM FOR UPDATED PART NUMBERS.<br>C S/N LABEL 11 A 3. SURFACE FALTNESS :CONCAVE INWARDS : TBD<br>B LABEL - GND CONVEX OUTWARDS : 0.38MM MAX.<br>4. ULESS OTHERWISE SPECIFIED<br>A LABEL - MODEL TOLERANCE AS BELOW<br>ITEM DESCRIPTION WHOLE NO  ANGLE<br>TABLE A ±1  ±0.5°<br>DECIMAL<br>.X  0.5<br>116.8 .XX  0.25<br>104.12 (TYP.)<br>1.27<br>C<br>21 31<br>22 32<br>1 8 2.06±0.05<br>O/P PIN2.06±0.05 16 9 I/P PIN AIF06ZPFC-01L SECTION A-A<br>2324 2.54 3433 MODEL NUMBER STANDOFF CROSS SECTION<br>(7X) TABLE B<br>SEE TABLE B<br>15.24<br>106.68(2X)<br>0.64±0.05 SQ. PIN B 4.50 (0.177) 4.50 (0.177)<br>(16X) 4.15 (0.163) 4.15 (0.163)<br>SEE NOTE 3<br>4<br>INSERT PUNCHED FROM<br>BOTTOM SIDE<br>M3X0.5P 3.30 3.30<br>SECTION A-A SECTION B-B<br>Pin Assignments<br>Input (AC) Output (DC)<br>31 L1 21 Positive<br>32 L1 22 Positive<br>33 L2 23 Negative<br>34 L2 24 Negative<br>Control Pin<br>1 PV AUX - 5 CLK OUT 9 SCL 13 S GND<br>2 TEMP MON 6 CLK IN 10 I2C ADDRESS 14 PFW<br>3 C MON 7 PV AUX + 11 V ADJ 15 LD ENABLE<br>4 C SHARE 8 SDA 12 PFW ADJ 16 PF ENABLE<br> +1.2  -0.5<br>12.7<br>4.7 3.0 13.95<br>2.54<br>61.0 22.86 (2X) 33.02 (2X) 50.80 (2X)<br>11<br>3.5 (0.14)[NO THREAD]<br>2.0 (0.08)[NO THREAD]<br>**----- End of picture text -----**<br>


**advancedenergy.com       3** 

**AIF06** 

## **MECHANICAL DRAWINGS (CONTINUED)** 

**==> picture [479 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ordering Information<br>Model Number Input Voltage Output Voltage Output Current Efficiency<br>AIF06ZPFC-01***L 85 - 264 Vac 400 Vdc 6 A 97% @ 230 Vac full load<br>AIF06ZPFC-02***L 85 - 264 Vac 400 Vdc 6 A 97% @ 230 Vac full load<br>**----- End of picture text -----**<br>


AIF06ZPFC-01L Single module operation and 2-module power sharing operation (TBC), Positive enable, RoHS-6, Threaded-inserts for mounting AIF06ZPFC-01NL Single module operation and 2-module power sharing operation (TBC), Negative enable, RoHS-6, Threaded-inserts for mounting AIF06ZPFC-02L 3 to 10 module power sharing operation, external diodes required, Positive enable, RoHS-6, Threaded-inserts for mounting AIF06ZPFC-02NL 3 to 10 module power sharing operation, external diodes required, Negative enable, RoHS-6, Threaded-inserts for mounting AIF06ZPFC-01NTL Single module operation or 2-module power sharing operation (TBC), Positive enable, RoHS-6, Non-Threaded-inserts for mounting AIF06ZPFC-01NNTL Single module operation or 2-module power sharing operation (TBC), Negative enable, RoHS-6, Non-Threaded-inserts for mounting AIF06ZPFC-02NTL 3 to 10 module power sharing operation, external diodes required, Positive enable, RoHS-6, Non-Threaded-inserts for mounting AIF06ZPFC-02NNTL 3 to 10 module power sharing operation, external diodes required, Negative enable, RoHS-6, Non-Threaded-inserts for mounting 

**4 advancedenergy.com** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-AIF06-235-01 9.10