AIF04ZPFC-02L

ey POWER 

## **Data Sheet** 

## **AIF - PFC Series** 1600 Watts 

**Total Power:  1600 Watts** 

**120 - 370 VDC (Configurable) Input Voltage: 85 - 264 VAC # of Outputs: Single** 

## SPECIAL FEATURES 

- Unity power factor 

High efficiency - up to 95% 

- Universal input voltage and frequency range 

Up to 1600 W output power 

Positive and Negative enable function 

Parallelable with accurate current sharing 

<10% harmonic distortion conforming to IEC1000-3-2 Compliance 

- 100°C baseplate operating temperature 

DC Input option 

Power fail warning signal 

- Enable output to control DC-DC Converter 

- EEPROM data storage via I[2] C Interface 

- External inrush current limited protection 

- Power density up to 290 W/in[3] Two year warranty 

## SAFETY 

- UL 60950 Recognized cUL 60950 Recognized TUV EN60950 Licensed 

## **Electrical Specifications** 

|**Electrical Specificationspecificationsecifications**|**Electrical Specificationspecificationsecifications**|
|---|---|
|**Input**||
|Input range|85 - 264 Vac / 120 - 370 Vdc(configurable)|
|Input surge|290 Vac / 1s|
|Input Frequency|50/60 Hz|
|Efficiency|95% @ 230 Vac, 1600 W(typical)|
|Total Harmonic Distortion|Less than 10%|
|Power Factor|0.99 typical(Po ± 500 W); 0.97 typical(Po ± 1000 W)|
|**Output**||
|Output Voltage|380V typical (Io =4.2 A / Vi > 180 Vac); 393 V typical (Io = 0A)<br>Note: Vinpeak must always be lower than Vout|
|Current Share Accuracy|10% max|
|Overvoltage Protection|430 max|
|Power Limit for AC input<br>for DC input|Vin = 85 Vac, Pmax = 1000W; Vin = 230 Vac, Pmax = 1600W Case;<br>Vin = 370 Vdc,Pmax =1600W|
|**Control**||
|Power Fail Warning|Direct drive output to opto-isolator|
|Power Fail WarningAdjust|195 to 355 Vdc adjustable|
|LD Enable|Direct drive output to opto-isolator|
|PFC Enable|TTL compatiable|
|Voltage Adjust|76% to 100% Vo|
|DC Input Enable||
|Clock Input(external sync)|6 Vp-ptypical @ 1 MHz ± 5%|
|Clock Output(int. clock)|6 Vp-ptypical @ 1 MHz ± 5%|
|Temperature Monitor Output|10 mV/°C|
|Current Monitor Output|0 to 1 mA(1 mA = 4.2 A output)|
|I2C Interface||



Notes:  Nominal values apply with sense pins disconnected and other control pin unconnected. 

## **Environmental Specifications** 

|Operatingtemperature|-20 °C to +100 °C(baseplate temperature)|
|---|---|
|Startuptemperature|-40 °C to +100 °C(baseplate temperature)|
|Storage temperature|-40 °C to +120 °C|
|Overtemperatureprotection|120 °C max|
|MTBF|1million hours|



## **Ordering Information** 

|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|**Ordering Informationg Information Information**|
|---|---|---|
|**Model Number**|**Description**|**Notes**|
|AIF04ZPFC-01L|1600 W Low Profile PC Module|Forparallel operation the total input current must be <16Arms.|
|AIF04ZPFC-02L 1600 W Low Profile PC Module|AIF04ZPFC-02L 1600 W Low Profile PC Module|Designed for parallel operation where the total input current >16Arms, requires external<br>rail rectifiers.|
|AIF04ZPFC-01NL||Negative Enable|
|AIF04ZPFC-01NL||Negative Enable|



1. Fon Non-thread hole, add suffix “-NT”. 

## **Pin Assignments** 

Input (AC) Output Control Pins 31. L1 21. Positive 1. PV Aux - ~~|~~ 32. L1 22. Positive 2. Temp Mon ~~a a~~ 33. L2 23. Negative 3. C Mon 34. L2 ~~eG~~ 24. Negative 4. C Share 5. Clk Out ~~Re~~ 6. Clk In ~~ee~~ 7. PV Aux + ~~Ge~~ 8. SDA ~~PP~~ 9. SCL ~~a~~ 10. DC Enable ~~ee es~~ 11. V Adj 12. PFW Adj 13. S Gnd ~~Re a~~ 14. PFW ~~Re~~ 15. LD Enable ~~Pe~~ 16. PF Enable ~~ee~~ 

## **Mechanical Drawings** 

## **WORLDWIDE OFFICES** 

Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Waterfront Business Park 14/F, Lu Plaza Tempe, AZ 85282 Merry Hill, Dudley 2 Wing Yip Street USA West Midlands, DY5 1LX Kwun Tong, Kowloon +1 888 412 7832 United Kingdom Hong Kong +44 (0) 1384 842 211 +852 2176 3333 

While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. 

**www.artesyn.com** 

For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com 

AIF-PFC Series-DS 11Feb2015