AIF04ZPFC-01L

## **ARTESYN AIF - PFC SERIES** 

## 1600 Watts 

Advanced Energy's Artesyn AIF04ZPFC series full-brick power factor correction module accepts a wide 85 to 264 VAC input and presents a unity power factor. It can also be configured to accept a DC input within the range 120 to 370 VDC. Rated at 1,600 watts, the module has a high conversion efficiency of 95% and provides a nominal non-isolated output voltage of 380 Vdc. Featuring an industry-standard 2.4 x 4.6 full-brick form factor and a height of only 0.5 inch, they have a power density of 290 watts per cubic inch. 

## **AT A GLANCE** 

## **Total Power:** 

**1600 Watts** 

**120 to 370 VDC (Configurable)** 

## **Input Voltage:** 

**85 to 264 VAC** 

**# of Outputs:** 

**Single** 

## **SPECIAL FEATURES** 

- Unity power factor 

- High efficiency - up to 95% 

- Universal input voltage and frequency range 

- Up to 1600 W output power 

- Positive and Negative enable function 

- Parallelable with accurate current sharing 

- <10% harmonic distortion conforming to IEC1000-3-2 Compliance 

- 100°C baseplate operating temperature 

- DC Input option 

- Power fail warning signal 

- Enable output to control DC-DC Converter 

- EEPROM data storage via I2C Interface 

- External inrush current limited protection 

- Power density up to 290 W/in3 

- Two year warranty 

## **SAFETY** 

- UL 62368 Recognized 

- cUL  62368 Recognized 

- TUV  EN62368 Licensed 

- UKCA Mark 

©2022 Advanced Energy Industries, Inc. 

## **AIF-PFC** 

## **ELECTRICAL SPECIFICATIONS** 

**==> picture [479 x 345] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>Input range 85 to 264 VAC / 120 to 370 VDC (configurable)<br>Input surge 290 Vac / 1s<br>Input Frequency 50/60 Hz<br>Efficiency 95% @ 230 VAC, 1600 W (typical)<br>Total Harmonic Distortion Less than 10%<br>Power Factor 0.99 typical (Po ± 500 W); 0.97 typical (Po ± 1000 W)<br>Output<br>Output Voltage 380V typical (Io =4.2 A / Vi > 180 Vac); 393 V typical (Io = 0A)<br>Note: Vin peak must always be lower than Vout<br>Current Share Accuracy 10% max<br>Overvoltage Protection 430 max<br>Power Limit  for AC input   Vin = 85 VAC, Pmax = 1000W; Vin = 230 VAC, Pmax = 1600W Case; Vin = 370 VDC, Pmax =1600W<br>for DC input<br>Isolation<br>Power Fail Warning Direct drive output to opto-isolator<br>Power Fail Warning Adjust 195 to 355 VDC adjustable<br>LD Enable Direct drive output to opto-isolator<br>PFC Enable TTL compatiable<br>Voltage Adjust 76% to 100% Vo<br>DC Input Enable<br>Clock Input (external sync) 6 Vp-p typical @ 1 MHz ± 5%<br>Clock Output (int. clock) 6 Vp-p typical @ 1 MHz ± 5%<br>Temperature Monitor Output 10 mV/°C<br>Current Monitor Output 0 to 1 mA (1 mA = 4.2 A output)<br>I2C Interface<br>**----- End of picture text -----**<br>


Notes: Nominal values apply with sense pins disconnected and other control pin unconnected. 

**==> picture [479 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
ENVIRONMENTAL SPECIFICATIONS<br>Operating temperature -20 °C to +100 °C (baseplate temperature)<br>Startup temperature -40 °C to +100 °C (baseplate temperature)<br>Storage temperature -40 °C to +120 °C<br>Overtemperature protection 120 °C max<br>MTBF 1million hours<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**AIF-PFC** 

## **ORDERING INFORMATION** 

**==> picture [479 x 79] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Number Description Notes<br>AIF04ZPFC-01L 1600 W Low Profile PC Module For parallel operation the total input current must be <16Arms.<br>AIF04ZPFC-02L 1600 W Low Profile PC Module Designed for parallel operation where the total input current >16Arms,<br>requires external rail rectifiers.<br>AIF04ZPFC-01NL Negative Enable<br>AIF04ZPFC-02NL Negative Enable<br>**----- End of picture text -----**<br>


1. Fon Non-thread hole, add suffix “-NT”. 

## **PIN ASSIGNMENTS** 

**==> picture [479 x 232] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input (AC) Output Control Pins<br>31. L1 21. Positive 1. PV Aux -<br>32. L1 22. Positive 2. Temp Mon<br>33. L2 23. Negative 3. C Mon<br>34. L2 24. Negative 4. C Share<br>5. Clk Out<br>6. Clk In<br>7. PV Aux +<br>8. SDA<br>9. SCL<br>10. DC Enable<br>11. V Adj<br>12. PFW Adj<br>13. S Gnd<br>14. PFW<br>15. LD Enable<br>16. PF Enable<br>**----- End of picture text -----**<br>


**advancedenergy.com       3** 

**AIF-PFC** 

## **MECHANICAL DRAWINGS** 

**==> picture [471 x 344] intentionally omitted <==**

**4 advancedenergy.com** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-AIF-PFC-235-01 1.30