AH083F245001-T

## **Notice for TAIYO YUDEN roducts p** 

Please read this notice before using the TAIYO YUDEN products. 

## REMINDERS 

- Product information in this catalog is as of October 2014.  All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. 

Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. 

- Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. 

- Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. 

- All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in advance. 

Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. 

In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. 

- The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called “TAIYO YUDEN’s official sales channel”). 

It is only applicable to the products purchased from any of TAIYO YUDEN’ s official sales channel. 

- Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog.  TAIYO YUDEN CO., LTD. grants no license for such rights. 

## ■ Caution for export 

Certain items in this catalog may require specific procedures for export according to “Foreign Exchange and Foreign Trade Control Law” of Japan, “U.S. Export Administration Regulations”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 

TAIYO YUDEN 20 **15** 

REFLOW 

## **CHIP ANTENNAS** 

## ■ ORDERING CODE 

**==> picture [475 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
－<br>A F △ 2 1 6 M 2 4 5 0 0 1 T<br>❶ ❷ ❸ ❹ ❺ ❻ ❼<br>❶Type ❸Dimensions (case size)［mm］ ❹Special Code ❺Frequency［MHz］ ❼Packaging<br>AH Multilayer Antenna 212 2.0×1.25 F Inverted F example ーT Tape & Reel<br>AF Helical Antenna 216 2.5×1.6 M Mono Pole 1575 1574.397～1576.443<br>316 3.2×1.6 Mono Pole 2450 2400～2500<br>N<br>083 8.0×3.0 (Dual) 5550 3100～8000<br>❷Electrode Code 104 10.0×4.0 1. Describe Center Frequency ❻Spec Code<br>△ With Plating 086 8.0×6.0 2. Lower Frequency for Dualband 01～<br>△＝Blank space S1～ Applicable to AH104F<br>**----- End of picture text -----**<br>


## ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY 

**==> picture [320 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
AH 212M Type, AF 216M Type AH 316M Type AH 083F Type<br>A Feed mark<br>RS.Nw Direction mark i~~ Directimyk Le<br>: E D a J b<br>:<br>4 i a<br>AH 104F Type AH 104N Type AH 086M Type<br>**----- End of picture text -----**<br>


|Type|L|W<br>T|T<br>E|a|b|c|Standard Quantity (pcs)<br>Embossed Tape|
|---|---|---|---|---|---|---|---|
|AF 216M|2.5±0.2|1.6±0.2<br>1.6±|±0.2<br>0.5±0.3|ー|ー|ー|2000|
|AH212M|2<br>＋0.3<br>－0.1|1.25±0.2<br>0.85±|±0.2<br>0.5±0.3|ー|ー|ー|4000|
|AH 316M|3.2±0.15|1.6±0.15<br>0.5±|±0.1<br>0.5±0.2|ー|1.0 min.|ー|3000|
|AH 083F|8±0.3|3±0.3<br>1±0.3|0.3<br>ー|3.1±0.3|0.3<br>1±0.3|1.15±0.3|1000|
|AH 104F|10±0.3|4±0.3<br>1±0.3|0.3<br>ー|2.5±0.3|0.3<br>1±0.3|1±0.3|2000|
|AH 104N|10±0.3|4±0.3<br>1±0.3|0.3<br>ー|3±0.3|0.8±0.3|1.5±0.3||
|AH 086M|8±0.3|6±0.3<br>1±0.3|0.3<br>ー|1.8±0.2|0.2<br>1±0.3|ー|1000|



## ■ PART NUMBERS 

|Applications|OrderingCode|External Dimensions(mm)|Center Frequency (MHz)|
|---|---|---|---|
|GPS|AH 316M157501|3.2×1.6×0.5|1575|
|W-LAN (2.4GHz）<br>Bluetooth<br>®<br>WiMAX（2.5GHz）<br>ZigBee|AF 216M245001|2.5×1.6×1.6|2450|
||AH 212M245001|2.0×1.25×0.85|2450|
||AH 316M245001|3.2×1.6×0.5|2450|
||AH 083F245001|8.0×3.0×1.0|2450|
||AH 104F2450S1|10.0×4.0×1.0|2450|
||AH 104F2650S1|10.0×4.0×1.0|2650|
|W-LAN（2.4GHz／5GHz）|AH 104N2450D1|10.0×4.0×1.0|2450/5400|
|UWB & WiMAX（3.5GHz）|AH 086M555003|8.0×6.0×1.0|5550|



▶ This catalog contains the typical specification only due to the limitation of space.  When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

TAIYO YUDEN 20 **15** 

**140** 

■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS 

Typical Characteristics on Taiyo Yuden evaluation board 

●AH 316M157501 

**==> picture [122 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bandwidth: 90MHz<br>(VSWR: less than 2)<br>1.325 1.575 1.825<br>**----- End of picture text -----**<br>


Typical characteristics of VSWR 

**==> picture [61 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
●AF 216M245001<br>**----- End of picture text -----**<br>


**==> picture [122 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
440MHz<br>**----- End of picture text -----**<br>


Typical characteristics of VSWR 

## ●AH 212M245001 

**==> picture [122 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bandwidth: 260MHz<br>(VSWR: less than 2)<br>2.0 2.5 3.0<br>**----- End of picture text -----**<br>


**==> picture [90 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical characteristics of VSWR<br>**----- End of picture text -----**<br>


**==> picture [340 x 409] intentionally omitted <==**

**----- Start of picture text -----**<br>
ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical Vertical<br>polarization polarization<br>Horizontal Horizontal<br>－Z polarization ＋X polarization<br>Typical characteristics of radiation pattern （@1.575GHz）<br>ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical<br>Vertical polarization<br>polarization Horizontal<br>Horizontal polarization<br>－Z polarization ＋X<br>Typical characteristics of radiation pattern （@2.45GHz）<br>＋X<br>ZX-Plane ＋Z ＋X XY-Plane －X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical<br>Vertical polarization<br>polarization Horizontal<br>Horizontal polarization<br>polarization<br>－Z ＋X<br>Typical characteristics of radiation pattern （@2.45GHz）<br>**----- End of picture text -----**<br>


## ●AH 316M245001 

**==> picture [492 x 265] intentionally omitted <==**

**----- Start of picture text -----**<br>
ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>Bandwidth: more than 170MHzBandwidth: 190MHz ＋X －X ＋Z －Y ＋Y<br>(VSWR: less than 2)<br>Vertical Vertical<br>polarization polarization<br>2.0 2.5 3.0 －Z Horizontalpolarization ＋X Horizontalpolarization<br>Typical characteristics of VSWR  Typical characteristics of radiation pattern （@2.45GHz）<br>●AH 083F245001<br>ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Bandwidth:150MHz<br>2<br>Vertical Vertical<br>polarization polarization<br>Horizontal Horizontal<br>－Z polarization ＋X polarization<br>Typical characteristics of VSWR  Typical characteristics of radiation pattern （@2.45GHz）<br>**----- End of picture text -----**<br>


▶ This catalog contains the typical specification only due to the limitation of space.  When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

**15** 

**141** 

■ ELECTRICAL CHARACTERISTICS・TYPICAL CHARACTERISTICS 

Typical Characteristics on Taiyo Yuden evaluation board 

●AH 104F2450S1 

**==> picture [121 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
300MHz<br>**----- End of picture text -----**<br>


Typical characteristics of VSWR 

●AH 104N2450D1 

**==> picture [121 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bandwidth:500MHz<br>**----- End of picture text -----**<br>


Typical characteristics of VSWR （2GHz band） 

**==> picture [121 x 115] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bandwidth:1200MHz<br>4.9 5.4 5.9<br>**----- End of picture text -----**<br>


Typical characteristics of VSWR （5GHz band） 

●AH 086M555003 

**==> picture [94 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 3 4 5 6 7 8 9 10<br>**----- End of picture text -----**<br>


Typical characteristics of VSWR 

**==> picture [340 x 540] intentionally omitted <==**

**----- Start of picture text -----**<br>
ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical Vertical<br>polarization polarization<br>Horizontal Horizontal<br>－Z polarization ＋X polarization<br>Typical characteristics of radiation pattern （@2.45GHz）<br>ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical Vertical<br>polarization polarization<br>Horizontal Horizontal<br>－Z polarization ＋X polarization<br>Typical characteristics of radiation pattern （@2.45GHz）<br>ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical Vertical<br>polarization polarization<br>Horizontal Horizontal<br>－Z polarization ＋X polarization<br>Typical characteristics of radiation pattern （@5.25GHz）<br>ZX-Plane ＋Z ＋X XY-Plane －X ＋X<br>－Z<br>＋Y －Y<br>＋X －X ＋Z －Y ＋Y<br>Vertical Vertical<br>polarization polarization<br>－Z Horizontalpolarization ＋X Horizontalpolarization<br>Typical characteristics of radiation pattern （@3.96GHz）<br>**----- End of picture text -----**<br>


▶ This catalog contains the typical specification only due to the limitation of space.  When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

**15** 

**142** 

## CHIP ANTENNAS 

## ■PACKAGING 

**==> picture [367 x 276] intentionally omitted <==**

**----- Start of picture text -----**<br>
①Minimum Quantity<br>Standard Quantity (pcs)<br>Type<br> Embossed Tape<br>AF216M, AF816M, AH104F, AH104N   2000<br>AH316M   3000<br>AH083F, AH086M   1000<br>AH212M   4000<br>②Tape Material<br>●Embossed Tape<br>—<br>Top tape<br>IN LEO?<br>\<br>—_ SE fo<br>Ay<br>= CF aw<br>mom) \<br>Oi, Chip Filled<br>/ oy Sprocket hole  O O OO<br>:<br>7<br>Base tape  Chip cavity  Chip<br>③Taping Dimensions<br>●Embossed Tape<br>**----- End of picture text -----**<br>


|Type|ChipCavity<br>~~Bs~~|ChipCavity<br>~~Bs~~|Tape Widthness<br>~~**e**e~~|Tape Widthness<br>~~**e**e~~|Insertion Pitch<br>~~e~~|Tape Thickness max.|Tape Thickness max.|
|---|---|---|---|---|---|---|---|
||A<br>~~Bs~~|B<br>~~Bs~~|C<br>~~**e**~~|D<br>~~**e**e~~<br>~~e~~|F<br>~~e~~<br>~~e~~|K<br>~~e~~|T|
|AF216M|1.85±0.2<br>（0.073±0.008）|2.75±0.2<br>（0.108±0.008）|8±0.2<br>（0.315±0.008）|3.5±0.1<br>（0.138±0.004）|4±0.1<br>（0.157±0.004）|1.95<br>（0.077）|0.3<br>（0.012）|
|AF816M|1.95±0.2<br>（0.077±0.008）|8.4±0.2<br>（0.331±0.008）|16±0.3<br>（0.630±0.012）|7.5±0.1<br>（0.296±0.004）|4±0.1<br>（0.157±0.004）|2.05<br>（0.081）|0.35<br>（0.014）|
|AH316M|1.9±0.2<br>（0.075±0.008）|3.5±0.2<br>（0.138±0.008）|8±0.2<br>（0.315±0.008）|3.5±0.1<br>（0.138±0.004）|4±0.1<br>（0.157±0.004）|0.85<br>（0.033）|0.3<br>（0.012）|
|AH083F|3.35±0.2<br>（0.132±0.008）|8.35±0.2<br>（0.329±0.008）|16±0.3<br>（0.630±0.012）|7.5±0.1<br>（0.295±0.004）|8±0.1<br>（0.315±0.004）|1.55<br>（0.061）|0.3<br>（0.012）|
|AH104F,<br>AH104N|4.35±0.2<br>（0.171±0.008）|10.35±0.2<br>（0.407±0.008）|24±0.3<br>（0.945±0.012）|11.5±0.1<br>（0.435±0.004）|8±0.1<br>（0.315±0.004）|1.55<br>（0.061）|0.3<br>（0.012）|
|AH086M|6.25±0.2<br>（0.246±0.008）|8.26±0.2<br>（0.325±0.008）|16±0.3<br>（0.630±0.012）|7.5±0.1<br>（0.296±0.004）|12±0.1<br>（0.473±0.004）|1.3<br>（0.051）|0.3<br>（0.012）|
|AH212M|1.5±0.2<br>（0.059±0.008）|2.3±0.2<br>（0.091±0.008）|8±0.3<br>（0.315±0.012）|3.5±0.1<br>（0.138±0.004）|4±0.1<br>（0.157±0.004）|1.5<br>（0.059）|0.3<br>（0.012）|



▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

chipantenna_pack_e-E02R01 

④Leader and Blank Portion 

**==> picture [41 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
⑤Reel size<br>**----- End of picture text -----**<br>


|Type|A|B|W|T|
|---|---|---|---|---|
|AF216M, AH212M<br>AH316M|178±2.0<br>（7.0±0.08）|50 min.<br>（2.0 min.）|10.0±1.5<br>（0.394±0.06）|3.0 max.<br>（0.12 max.）|
|AF816M<br>AH083F|178±2.0<br>（7.0±0.08）|50 min.<br>（2.0 min.）|17.0±1.0<br>（0.67±0.04）|2.5 max.<br>（0.1 max.）|
|AH104F<br>AH104N|330±2.0<br>（13.0±0.08）|100±1.0<br>（3.94±0.04）|25.5±1.0<br>（1.0±0.04）|3.0 max.<br>（0.12 max.）|
|AH086M|330±2.0<br>（13.0±0.08）|100±1.0<br>（3.94±0.04）|17.0±1.0<br>（0.67±0.04）|2.5 max.<br>（0.1 max.）|



## ⑥Top Tape Strength 

The top tape requires a peel-off force of 0.1～0.7N in the direction of the arrow as illustrated below. 

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

chipantenna_pack_e-E02R01 

## CHIP ANTENNAS 

## ■RELIABILITY DATA 

1. Operating Temperature Range Specified Value －20～＋80℃ 2. Storage Temperature Range Specified Value －40～＋85℃ Test Methods and ※with being taped, －20～＋40℃ Remarks ~~_~~ 3. Solderability Specified Value At least 90% of immersed terminal surface is covered by new solder. Solder temperature : 230±5℃ Test Methods and Duration : 3±1 sec. Remarks Preconditioning : Preheating at 150℃ after immersion into flux. 

4. Thermal Shock Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery after 10 times of 30min.immersion alternately at －40℃ and 85℃ of temperature, followed by evaluating electrical Remarks characteristics. ~~OO~~ 5. High Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical Remarks characteristics. ~~OO~~ 6. Low Temperature Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with －40℃ of temperature, followed by evaluating electrical Remarks characteristics. ~~a~~ 7. Humidity Storage Test Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and 1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90～95% relative humidity followed by Remarks evaluating electrical characteristics. ~~a~~ 8. Resistance to Reflow Specified Value Shall satisfy required VSWR value of individual specifications for each item. Test Methods and Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics. Remarks ~~_~~ 

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

chipantenna_reli_e-E02R01 

## CHIP ANTENNAS 

## ■PRECAUTIONS 

## 1. PCB Design 

**==> picture [531 x 626] intentionally omitted <==**

**----- Start of picture text -----**<br>
◆Land pattern design<br>Precautions<br>Please do not arrange the surface and inside layer pattern near the antenna mounting area.<br>◆Land pattern design<br>Land pattern dimension examples and recommended antenna land pattern<br>AF216M/816M  AH316M<br>}----] 1 Dimensions<br>L —i P 1722/1 Type  L  P  A<br>#1 tot Lee AF216M  2.5  1.5  3<br>mez 1 Yen abanfy 1.2 AF816M  8  7  5<br>AH212M  2  1  3<br>Unit：mm<br>GND if Unit: mm2 GND ZA Z WYYH; Unit : mm<br>= S Land for matching circuit as iz Hs<br>| yy (1005 bia! bb seee— Land for matching circuit<br>Hi Land for input terminal S00Ue input eeeUy Bee. (1005 chip)<br>o stor New 1 || Land for input terminal 500 imput<br>804: Pleasevarie’ doen'tTor arrangeormin the surface and inside layer pattern near im Land for GND tenminal<br>the antenna mounting area.<br>(Please refer to our company Evaluation board.)<br>32: Prescribes soldering area by a resist<br>AH083F  AH104F<br>4 4 05 05<br>5.2 1 1,,;1,1,1 1<br>| < [ola]<br>Technical  - foo 1 q<br>Considerations  i)Ue a 33 1 2 in<br>1 1 | if :---4-- ===!<br>05 T a<br>GND ts GND Yy Unit: mm<br>y LE,<br>Hien [for] [input] [terminal] “ 500 inputUni i | Land for input terminal 500 input<br>LE][Land Land fortor GND NG terminal terminal nit; mm im[i Land Land forfor GND NC terminal terminal<br>AH104N  AH086M<br>WD  ATE AT<br>09 21082,7 0.9 aR<br>r =| |- 11<br>111'<br>; i--4 J----[ [----| |---,<br>1 1<br>1 A H 1<br>1 . Tio<br>o fa<br>GND We, aumn GND te, Unit : mm<br>|| Land for input terminal 500 input | Land for input terminal 500 input<br>O Landfor NC terminal<br>didi batts im Land for NC terminal<br>2. Soldering<br>◆Conditions of Reflow soldering (for reference)<br>・ Pb Free Reflow Profile  ・ Reflow profile<br>300<br>Peak<br>260℃ Max.  jemperatureiG} temperature pattern of reflow fumace<br>Within 10sec. 250° peakpeoc~240lemperaiune = 215<br>200 200<br>Technical  Slow  150 —<br>Considerations  cooling 100 ※ Components should be preheated to within 100<br>50 to 130℃ from soldering temperature.<br>100 0 ※ Assured to be reflow soldering for 2 times.<br>Preheating150℃  Heating above about 60) 55-75 po~30<br>Note : The above profiles are the maximum allowable<br>60sec. Min.  230℃  Durelion(seconds)<br>soldering condition, therefore these<br>40sec. Max.<br>0 profiles are not always recommended.<br>Temperature（℃）<br>**----- End of picture text -----**<br>


- This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

chipantenna_prec_e-E02R01 

3. Storage Conditions 

◆Storage conditions 

1. The Products should not be used in the following environments : 

・ exposure to special gases such as (C12, NH3, SOx, NOx) ・ exposure to volatile gas or inflammable gas ・ exposure to a lot of dust ・ exposure to water or condensation Precautions ・ exposure to direct sunlight or freezing 2. The Products should be kept in the following conditions : ・ Temperature : －10～＋40℃ ・ Humidity : 70％RH max. 3. The products should be used within 6 months after delivery. In case of storage over 6 months, solderability shall be checked before actual usage. 

■ Please contact our offices for further details of specifications. 

All of the standard values listed here are subject to change without notice due to technical improvements. Therefore, please check the specifications carefully before use. 

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 

chipantenna_prec_e-E02R01